X-ray fluorescence (XRF) analysis utilizes particle size which is resulted from milling of a material. The milling ensures uniform and fine grained powder. The finer and more uniform the particle size is, the better t...X-ray fluorescence (XRF) analysis utilizes particle size which is resulted from milling of a material. The milling ensures uniform and fine grained powder. The finer and more uniform the particle size is, the better the result and easier it is for material quality control. To ensure uniformity in particle size and finer powder, a comparative analysis was conducted with different grinding aids and pressed pellet method was used in obtaining analysis results. Pressed pellets of cement raw meal sample milled with different grinding aids (graphite, aspirin and lithium borate) were subjected to XRF. Graphite produced better particle size uniformity with a corresponding standard deviation that made quality control of raw meal easier and better than aspirin and lithium borate.展开更多
Using GIS spatial statistical analysis method, with ArcGIS software as an analysis tool, taking the diseased maize in Hedong District of Linyi City as the study object, the distribution characteristic of the diseased ...Using GIS spatial statistical analysis method, with ArcGIS software as an analysis tool, taking the diseased maize in Hedong District of Linyi City as the study object, the distribution characteristic of the diseased crops this time in spatial location was analyzed. The results showed that the diseased crops mainly dis- tributed along with river tributaries and downstream of main rivers. The correlation between adjacent diseased plots was little, so the infection of pests and diseases were excluded, and the major reason of incidence might be river pollution.展开更多
The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s sur...The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s surface roughness that usually depend on exploitation of digital elevation data for its reliable determination. This research aimed at exploring the different approaches for defining and extraction of the Earth’s surface roughness from Airborne LiDAR Measurements. It also aimed at evaluating the effects of the window size of the standard deviation filter on the created roughness maps in downtown landscapes using three known approaches namely;standard deviation filtering of the Digital Elevation Model (DEM), standard deviation filtering of the slope gradient model and standard deviation filtering of the profile curvature model. In this context, different roughness maps have been created from Airborne LiDAR measurements of the City of Toronto, Canada using the three filtering approaches with varying window sizes. Visual analysis has shown color tones of small roughness values with smooth textures dominate the roughness maps from small window sizes of the standard deviation filter, however, increasing the window sizes has produced wider variations of the color tones and rougher texture roughness maps. The standard deviations and ranges of the roughness maps from LiDAR DEM have increased due to increasing the filter window size while the skewness and kurtosis have decreased due to increasing the window size, indicating that the roughness maps from larger window sizes are statistically more symmetrical and more consistent. Thus, kurtosis has decreased by 53% and 82% due to increasing the window size to 7 × 7 and 15 × 15 respectively. The standard deviations of the roughness maps from the slope gradient model have increased due to increasing the window size till 15 × 15 while they have decreased with more increases. However, skewness has decreased due to increasing the window size till 15 × 15 and the kurtosis has decreased with higher rate till window size of 11 × 11. In the roughness maps from the profile curvature model, the ranges and skewness have decreased by 93.6% and 82.6% respectively due to increasing the window size to 15 × 15 while, kurtosis has decreased by 58.6%, 76.3% and 93.76% due to increases in the filter window size to 5 × 5, 7 × 7 and 15 × 15 respectively.展开更多
环境敏感因子是沉积环境演化研究中的重要参数,其提取方法有多种,不同方法在海湾内应用成果相对较少。文章根据山东半岛威海湾WH-05岩心(钻探深度18.2 m)高分辨率(2 cm)粒度分析结果,采用基本端元模拟算法(BasEMMA)、粒级—标准偏差法...环境敏感因子是沉积环境演化研究中的重要参数,其提取方法有多种,不同方法在海湾内应用成果相对较少。文章根据山东半岛威海湾WH-05岩心(钻探深度18.2 m)高分辨率(2 cm)粒度分析结果,采用基本端元模拟算法(BasEMMA)、粒级—标准偏差法和粒级旋转主成分分析法(V-PCA)提取了环境敏感因子,结合AMS14C数据,对不同方法提取的环境敏感因子进行了对比分析,探讨了其对季风强度变化的响应关系。结果表明:8.4 ka B.P.以来威海湾沉积物类型均为粉砂,粉砂含量为主、黏土含量次之、砂含量较少,以跳跃组分为主,悬浮组分次之。BasEMMA和粒级—标准偏差法提取的3个敏感粒级范围(2.6~11.0μm、31.3~63.4μm、256.9~500.0μm)总体一致,能较好地反映东亚季风长周期变化事件(8.4~6.5 ka B.P.东亚季风强度减弱;6.5 ka B.P.至今东亚季风强度增强);V-PCA提取的环境敏感因子,能较好地反映东亚季风短周期变化事件(如明清小冰期、西汉小冰期事件等)。以上三种方法提取的环境敏感因子指示了研究区气候变化,对研究区沉积环境具有较好的指示作用。展开更多
文摘X-ray fluorescence (XRF) analysis utilizes particle size which is resulted from milling of a material. The milling ensures uniform and fine grained powder. The finer and more uniform the particle size is, the better the result and easier it is for material quality control. To ensure uniformity in particle size and finer powder, a comparative analysis was conducted with different grinding aids and pressed pellet method was used in obtaining analysis results. Pressed pellets of cement raw meal sample milled with different grinding aids (graphite, aspirin and lithium borate) were subjected to XRF. Graphite produced better particle size uniformity with a corresponding standard deviation that made quality control of raw meal easier and better than aspirin and lithium borate.
文摘Using GIS spatial statistical analysis method, with ArcGIS software as an analysis tool, taking the diseased maize in Hedong District of Linyi City as the study object, the distribution characteristic of the diseased crops this time in spatial location was analyzed. The results showed that the diseased crops mainly dis- tributed along with river tributaries and downstream of main rivers. The correlation between adjacent diseased plots was little, so the infection of pests and diseases were excluded, and the major reason of incidence might be river pollution.
文摘The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s surface roughness that usually depend on exploitation of digital elevation data for its reliable determination. This research aimed at exploring the different approaches for defining and extraction of the Earth’s surface roughness from Airborne LiDAR Measurements. It also aimed at evaluating the effects of the window size of the standard deviation filter on the created roughness maps in downtown landscapes using three known approaches namely;standard deviation filtering of the Digital Elevation Model (DEM), standard deviation filtering of the slope gradient model and standard deviation filtering of the profile curvature model. In this context, different roughness maps have been created from Airborne LiDAR measurements of the City of Toronto, Canada using the three filtering approaches with varying window sizes. Visual analysis has shown color tones of small roughness values with smooth textures dominate the roughness maps from small window sizes of the standard deviation filter, however, increasing the window sizes has produced wider variations of the color tones and rougher texture roughness maps. The standard deviations and ranges of the roughness maps from LiDAR DEM have increased due to increasing the filter window size while the skewness and kurtosis have decreased due to increasing the window size, indicating that the roughness maps from larger window sizes are statistically more symmetrical and more consistent. Thus, kurtosis has decreased by 53% and 82% due to increasing the window size to 7 × 7 and 15 × 15 respectively. The standard deviations of the roughness maps from the slope gradient model have increased due to increasing the window size till 15 × 15 while they have decreased with more increases. However, skewness has decreased due to increasing the window size till 15 × 15 and the kurtosis has decreased with higher rate till window size of 11 × 11. In the roughness maps from the profile curvature model, the ranges and skewness have decreased by 93.6% and 82.6% respectively due to increasing the window size to 15 × 15 while, kurtosis has decreased by 58.6%, 76.3% and 93.76% due to increases in the filter window size to 5 × 5, 7 × 7 and 15 × 15 respectively.
文摘环境敏感因子是沉积环境演化研究中的重要参数,其提取方法有多种,不同方法在海湾内应用成果相对较少。文章根据山东半岛威海湾WH-05岩心(钻探深度18.2 m)高分辨率(2 cm)粒度分析结果,采用基本端元模拟算法(BasEMMA)、粒级—标准偏差法和粒级旋转主成分分析法(V-PCA)提取了环境敏感因子,结合AMS14C数据,对不同方法提取的环境敏感因子进行了对比分析,探讨了其对季风强度变化的响应关系。结果表明:8.4 ka B.P.以来威海湾沉积物类型均为粉砂,粉砂含量为主、黏土含量次之、砂含量较少,以跳跃组分为主,悬浮组分次之。BasEMMA和粒级—标准偏差法提取的3个敏感粒级范围(2.6~11.0μm、31.3~63.4μm、256.9~500.0μm)总体一致,能较好地反映东亚季风长周期变化事件(8.4~6.5 ka B.P.东亚季风强度减弱;6.5 ka B.P.至今东亚季风强度增强);V-PCA提取的环境敏感因子,能较好地反映东亚季风短周期变化事件(如明清小冰期、西汉小冰期事件等)。以上三种方法提取的环境敏感因子指示了研究区气候变化,对研究区沉积环境具有较好的指示作用。