Preparation of high viscosity average molecular mass poly-L-lactide

Poly-L-lactide（PLLA） was synthesized by ring-opening polymerization fi＇om high purity L-lactide with tin octoate as initiator, and characterized by means of infi＇ared, and ^1H-nuclear magnetic resonance. The influences of initiator concentration, polymerization temperature and polymerization time on the viscosity average molecular mass of PLLA were investigated. The effects of different purification methods on the concentration of initiator and viscosity average molecular mass were also studied. PLLA with a viscosity average molecular mass of about 50.5×1^04 was obtained when polymerization was conducted for 24 h at 140℃ with the molar ratio of monomer to purification initator being 12 000. After purification, the concentration of tin octoate decreases; however, the effect of different purification methods on the viscosity average molecular mass of PLLA is different, and the obtained PLLA is a typical amorphous polymeric material. The crystallinity of PLLA decreases with the increase of viscosity average molecular mass.

Characterization of Average Molecular Structure of Heavy Oil Fractions by ~1H Nuclear Magnetic Resonance and X-ray Diffraction

The chemical structure of heavy oil fractions obtained by liquid-solid adsorption chromatography was character-ized by 1 H nuclear magnetic resonance and X-ray diffraction.The molecular weight and molecular formula of asphaltene molecules were estimated by combining 1 H nuclear magnetic resonance and X-ray diffraction analyses,and were also ob-tained from vapor pressure osmometry and elemental analysis.Heteroatoms,such as S,N,and O atoms,were considered in the construction of average molecular structure of heavy oils.Two important structural parameters were proposed,including the number of alkyl chain substituents to aromatic rings and the number of total rings with heteroatoms.Ultimately,the av-erage molecular structures of polycyclic aromatics,heavy resins and asphaltene molecules were constructed.The number of α-,β-,γ-,and aromatic hydrogen atoms of the constructed average molecular structures fits well with the number of hydro-gen atoms derived from the experimental spectral data.

Effect of molecular structure and slump loss resistance of polycarboxylate superplasticizers on self-compacting concrete

A new kind of polycarboxylate superplasticizer with high slump loss resistance was obtained by designing scheduled molecular structure.The number average molecular mass of the polymer was characterized by the gel permeation chromatography measurements.And chemical structure of the polymer was observed by the Fourier transform infrared spectroscopy(FT-IR).The results show that the good workable maintaining of self-compacting concrete could be achieved through direct adjustment of number average molecular mass and different unsaturated monomer in synthetic process.The FT-IR analysis illustrated that the high slump loss resistance of polycarboxylate superplasticizers with ester and carboxyl group and expectations of molecular structure were designed.

ON THE KINETICS AND MECHANISM OF THE COPOLYMERIZATION OF ACRYLONITRILE WITH STYRENE IN THE PRESENCE OF COPPER CHLORIDE

The copolymerization of styrene (St) and acrylonitrile (AN) complexed with CuCl_2 monomer by a free radicalmechanism was performed using benzoyl peroxide as an initiator at 65℃ under N_2 atmosphere for 150 min. The rate ofpolymerization (R_p) was found to increase linearly with the concentration (in mol/L) of CuCl_2, AN and St through scalingrelations. The activation energy of the copolymerization process in the presence and absence of CuCl_2 was found to be46.5 kJ/mol and 102 kJ/mol, respectively. The viscosity average molecular weigh of the copolymer and the k_p^2/k_t ratio weredctermired to further assess the accelerating effect of CuCl_2 on the copolymerization process. The copolymerization processin the presence of CuCl_2 has a radical complex mechanism.

DSC Study of Thermal Properties of Biodegradable Poly(Butylene Succinate-co-terephthalate)

Poly （ butylene succinate ） （ PBS ）, poly （ butylene terephthalate） （PBT） and poly （butylene succirmte-coterephthalate） （PBST）s were synthesized from dimethyl succinate and/or dimethyl terephthalate reacting with 1,4- butanediol through a process of transesterification/ polycondmsation in the presence of a high effective catalyst and characterized by means of GPC and DSC. The investigation was mainly focused on the influence of content of terephthalate units on the molecular weight and thermal properties of resulting polymers. It is revealed that the melting temperature and crystallinity of synthesized polymers decrease first with the increase of terephthalate units, then shift to rise gradually by DSC measurements. The results of Flory equation suggest sequence structure of PBSTs is random.

KINETICS OF SUSPENDED EMULSION POLYMERIZATION OF METHYL METHACRYLATE

The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of NMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (R-p0) and steady-state polymerization rate (R-p) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: R-p0 proportional to [I](0.73)[S](0.32) and R-p proportional to [I](0.71)[S](0.23). The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.

Synthesis and Characterization of Styrene-Maleic Anhydride-Butyl Acrylate Terpolymer

A novel surface modifying agent and internal compatilizer of inorganic and macromolecule composite materials,P(St/MAH/BA)terpolymer,was synthesized in butanone by solution polymerization method using styrene(St),maleic anhydride(MAH),and butyl acrylate(BA)as monomers and azobisisobutyronitrile(AIBN)as an initiator.Some affecting factors on terpolymers yields such as polymerization time,reaction temperature,solvent volume,initiator content,and reactants ratios were studied.Furthermore,the structure and thermal properties of terpolymers were primarily characterized and determined by Fourier Transform Infrared Spectroscopy(FTIR),nuclear magnetic resonance(NMR),thermogravimetric analysis(TGA),and gel permeation chromatography(GPC).The results indicate that the terpolymers are random polymers and the yields are low,but the thermal decomposed temperature of terpolymers P(St/MAH/BA)is around 220 ℃ and the average molecular weights(Mw)achieve 1.189×105 g·mol-1.

Discrimination of Car Headlight Plastic by Gel Permeation Chromatography

Car headlight plastic as a kind of evidence often can be seen in traffic accidents and some other cases.We tested 20 brands of car headlight plastic using gel chromatography.The data were processed using the Statistical Package for the Social Sciences(SPSS)one‑way analysis of variance(ANOVA)and the discrimination rate was 97.14%.This indicated that we could discriminate between different headlights by the molecular weight of their headlight plastic.Gel permeation chromatography is an effective method of discriminating between headlights,particularly in the case of a traffic accident.

Gelation of a Reversible Markov Process of Polymerization

Abstract In this paper a reversible Markov process as a chemical polymers reaction of two types of monomers is defined. By analyzing the partition functions of the process we obtain three different distributions of the average molecular weight, depending on the value of strength of the fragmentation reaction, and prove that a gelation of the process will occur in the thermodynamic limit.

Effect of the addition of different sodium alginates on viscoelastic,structural features and hydrolysis kinetics of corn starch gels

Corn starch gels(1:4 w:w)were made with the addition(up to 2%w/w starch basis)of sodium alginates of different average molecular sizes and nature.Rheology of the starchy gels were characterized to evaluate their viscoelasticity.Gels were subjected to in vitro digestion to estimate the effect of alginates addition on glycemic response.Tested alginates significantly decreased the value of the elastic modulus of gels.The coordination number obtained from complex modulus indicated that in general,less compact structures were obtained in the presence of alginates.These results were confirmed by scanning electron micrographs,where significant differences in the structure of alginate-corn starch gels were observed,but molecular size of alginates was not critical.Hydrolysis rate decreased with the presence of alginates in corn starch gels by interactions of alginates with leached amylose.At high alginate content,slower hydrolysis rates were determined when the most hygroscopic alginates were added.