The limitations of several existing classical rock damage models were critically appraised. Thereafter, a description of a new model to estimate the response of rock was provided. The results of an investigation lead ...The limitations of several existing classical rock damage models were critically appraised. Thereafter, a description of a new model to estimate the response of rock was provided. The results of an investigation lead to the development and confirmation of a new index parabola damage model. The new model is divided into two parts, fictitious damage and real damage and bordered by the critical damage point. In fictitious damage, the damage variable follows the index distribution, while in the real damage a parabolic distribution is used. Thus, the so called index parabola damage model is derived. The proposed damage model is applied to simulate the damage procedure of marble under uni axial loading. The results of the tests show that the proposed model is in excellent agreement with experimental data, in particular the nonlinear characteristic of rock deformation is adequately represented. [展开更多
A total of 540 nonlinear steady-state finite element analyses were performed to study the influence of temperature and dimensionless geometrical parameters(β,γ,θ,andτ)on the ultimate strength,failure modes,and ini...A total of 540 nonlinear steady-state finite element analyses were performed to study the influence of temperature and dimensionless geometrical parameters(β,γ,θ,andτ)on the ultimate strength,failure modes,and initial stiffness of two-planar tubular KT-joints.The joints were analyzed under two types of axial loading and five different temperatures(20℃,200℃,400℃,550℃,and 700℃).So far,there has not been any equation available for calculating the ultimate strength of two-planar tubular KT-joints at elevated temperatures.Hence,after parametric study,a set of design formulas were developed through nonlinear regression analyses,to calculate the ultimate strength of two-planar tubular KT-joints subjected to axial loading at elevated temperatures.展开更多
BACKGROUND The response to axial physiological pressure due to load transfer to the lumbar spine structures is among the various back pain mechanisms.Understanding the spine adaptation to cumulative compressive forces...BACKGROUND The response to axial physiological pressure due to load transfer to the lumbar spine structures is among the various back pain mechanisms.Understanding the spine adaptation to cumulative compressive forces can influence the choice of personalized treatment strategies.AIM To analyze the impact of axial load on the spinal canal’s size,intervertebral foramina,ligamenta flava and lumbosacral alignment.METHODS We assessed 90 patients using three-dimensional isotropic magnetic resonance imaging acquisition in a supine position with or without applying an axial compression load.Anatomical structures were measured in the lumbosacral region from L1 to S1 in lying and axially-loaded magnetic resonance images.A paired t test atα=0.05 was used to calculate the observed differences.RESULTS After axial loading,the dural sac area decreased significantly,by 5.2%on average(4.1%,6.2%,P<0.001).The intervertebral foramina decreased by 3.4%(2.7%,4.1%,P<0.001),except for L5-S1.Ligamenta flava increased by 3.8%(2.5%,5.2%,P<0.001),and the lumbosacral angle increased.CONCLUSION Axial load exacerbates the narrowing of the spinal canal and intervertebral foramina from L1-L2 to L4-L5.Cumulative compressive forces thicken ligamenta flava and exaggerate lumbar lordosis.展开更多
The behavior of square-tubed reinforced concrete (STRC) short columns subjected to axial compression was studied in detail with an accurate nonlinear finite element model (FEM) . Different width to thickness ratios (D...The behavior of square-tubed reinforced concrete (STRC) short columns subjected to axial compression was studied in detail with an accurate nonlinear finite element model (FEM) . Different width to thickness ratios (D/t = 50 150) of the steel tube and the compressive strength of concrete (C80 and C50) were adopted in this research. The axial load strength,steel tube strain and load-shortening response were determined from FEM and the analysis results from FEM were compared with those from experiment. The analysis and test results indicate that the concrete strength little affectes the confinement of the steel tube on the concrete. The transverse stress of the tube at the axial load point increases with the increment in the width to thickness ratio. Based on the results from FEM and experiment,a formula for the prediction of the axial load strength was proposed in this paper.展开更多
The measurement of pile axial load is of great significance to determining pile foundation design parameters such as skin friction and end bearing capacity and analyzing load transfer mechanisms.Affected by the temper...The measurement of pile axial load is of great significance to determining pile foundation design parameters such as skin friction and end bearing capacity and analyzing load transfer mechanisms.Affected by the temperature and ice content of frozen ground,the interface contact relationship between pile foundation and frozen soil is complicated,making pile axial load measurements more uncertain than that in non-frozen ground.Therefore,it is necessary to gain an in-depth understanding of the current pile axial load test methods.Four methods are systematically reviewed:vibrating wire sensors,strain gauges,sliding micrometers,and optical fiber strain sensors.At the same time,the applicability of the four test methods in frozen soil regions is discussed in detail.The first two methods are mature and commonly used.The sliding micrometer is only suitable for short-term measurement.While the Fiber Bragg grating(FBG)strain gauge meets the monitoring requirements,the Brillouin optical time-domain reflectometer(BOTDR)needs further verification.This paper aims to provide a technical reference for selecting and applying different methods in the pile axial load test for the stability study and bearing capacity assessment of pile foundations in cold regions.展开更多
In this paper,the local buckling of cylindrical long shells is discussed under axial pulse loads in a Hamiltonian system.Using this system,critical loads and modes of buckling of shells are reduced to symplectic eigen...In this paper,the local buckling of cylindrical long shells is discussed under axial pulse loads in a Hamiltonian system.Using this system,critical loads and modes of buckling of shells are reduced to symplectic eigenvalues and eigensolutions respectively.By the symplectic method,the solution of the local buckling of shells can be employed to the expansion series of symplectic eigensolutions in this system.As a result,relationships between critical buckling loads and other factors,such as length of pulse load,thickness of shells and circumferential orders,have been achieved.At the same time,symmetric and unsymmetric buckling modes have been discuss.Moreover,numerical results show that modes of post-buckling of shells can be Bamboo node-type,bending type,concave type and so on.Research in this paper provides analytical supports for ultimate load prediction and buckling failure assessment of cylindrical long shells under local axial pulse loads.展开更多
It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial com...It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial compressors was rarely investigated in open literatures. The present work aims to show the capability of tandem blades to break the loading limit of conventional blades for highly loaded compressors. The 2D models of the maximum static pressure rise derived in previous work were validated by a large amount experimental data, which showed a good agreement. An E parameter was defined to evaluate the stall margin of compressor based on the theoretical models, which indicated that the tandem blade was able to increase the loading limit of axial compressors. A single-blade stage with a loading coefficient of 0.46(based on the blade tip rotating speed) was designed as the baseline case under the guidance of the E parameter. A tandem-blade stage was then designed by ensuring that the velocity triangles were similar to the single-blade stage. The performances of both stages were investigated experimentally. The results showed that the maximum efficiency of the tandem-blade stage was 92.8%, 1% higher than the single;the stall margin increased from 16.9% to 22.3%. Besides, the maximum pressure rise of tandem rotors was beyond the loading limit of 2D single-blade cascades, which confirmed the potential of tandem blades to break the loading limit of axial compressors.展开更多
The Local Joint Flexibility(_(LJF))of steel K-joints reinforced with external plates under axial loads is investigated in this paper.For this aim,firstly,a finite element(FE)model was produced and verified with the re...The Local Joint Flexibility(_(LJF))of steel K-joints reinforced with external plates under axial loads is investigated in this paper.For this aim,firstly,a finite element(FE)model was produced and verified with the results of several experimental tests.In the next step,a set of 150 FE models was generated to assess the effect of the brace angle(θ),the stiffener plate size(ηandλ),and the joint geometry(γ,τ,ξ,andβ)on the_(LJF)factor(f_(LJF)).The results showed that using the external plates can decrease 81%of the f_(LJF).Moreover,the reinforcing effect of the reinforcing plate on the f_(LJF)is more remarkable in the joints with smallerβ.Also,the effect of theγon the f_(LJF)ratio can be ignored.Despite the important effect of the f_(LJF)on the behavior of tubular joints,there is not available any study or equation on the f_(LJF)in any reinforced K-joints under axial load.Consequently,using the present FE results,a design parametric equation is proposed.The equation can reasonably predict the f_(LJF)in the reinforced K-joints under axial load.展开更多
In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters...In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters have a considerable impact on the variation of stress concentration factors on tubular TY-joints under axial loads.Thus,the highest stress concentration factor values are observed on the vertical brace than on the inclined one.The finite element results of the tubular structures were verified by parametric equations and experimental data.A parametric study was carried out by analyses using the nonlinear regression method to obtain parametric equations.These equations are used to calculate stress concentration factors and to analyse the fatigue resistance of TY-joints due to axial loads.展开更多
The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former.I...The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former.In this study,the equations for the deflection curve and vibration frequencies of a simply supported discontinuous beam under axial loads are derived analytically on the basis of boundary,continuity,and deformation compatibility conditions by using equivalent spring models.The equation for the deflection curve is solved using undetermined coefficient methods.The normal function of the transverse vibration equation is obtained by separating variables.The differential equations for the beam that consider moments of inertia,shearing effects,and gyroscopic moments are investigated using the transfer matrix method.The deflection and vibration frequencies of the discontinuous beam are studied under different axial loads and connection spring stiffness.Results show that deflection decreases and vibration frequencies increase exponentially with increasing connection spring stiffness.Moreover,both variables remain steady when connection spring stiffness reaches a considerable value.Lastly,an experimental study is conducted to investigate the vibration characteristics of a discontinuous beam with a curvic coupling,and the results exhibit a good match with the proposed model.展开更多
When diaphragm wall is used as the permanent vertical bearing structure,design standard of the bored pile adopted has to induce the risk or iste. The vertical load transfer mechanism and bearing capacity of the diaphr...When diaphragm wall is used as the permanent vertical bearing structure,design standard of the bored pile adopted has to induce the risk or iste. The vertical load transfer mechanism and bearing capacity of the diaphragm wall are examined by a field testing program at the site in Shanghai soft clays. Test results indicate that the diaphragm wall almost behaves as a rigid body under the vertical load. It induces that the skin friction and the toe resistance of the wall develop simultaneously. The skin friction resistance carries the large portion of the vertical load,and the toe resistance of the wall provides about 9.2% of vertical bearing load. Toe-grouting technique is found to achieve a remarkable increase in skin friction and toe resistance. The toe resistance of the grouted wall provides about 17.5% of vertical load.展开更多
文摘The limitations of several existing classical rock damage models were critically appraised. Thereafter, a description of a new model to estimate the response of rock was provided. The results of an investigation lead to the development and confirmation of a new index parabola damage model. The new model is divided into two parts, fictitious damage and real damage and bordered by the critical damage point. In fictitious damage, the damage variable follows the index distribution, while in the real damage a parabolic distribution is used. Thus, the so called index parabola damage model is derived. The proposed damage model is applied to simulate the damage procedure of marble under uni axial loading. The results of the tests show that the proposed model is in excellent agreement with experimental data, in particular the nonlinear characteristic of rock deformation is adequately represented. [
文摘A total of 540 nonlinear steady-state finite element analyses were performed to study the influence of temperature and dimensionless geometrical parameters(β,γ,θ,andτ)on the ultimate strength,failure modes,and initial stiffness of two-planar tubular KT-joints.The joints were analyzed under two types of axial loading and five different temperatures(20℃,200℃,400℃,550℃,and 700℃).So far,there has not been any equation available for calculating the ultimate strength of two-planar tubular KT-joints at elevated temperatures.Hence,after parametric study,a set of design formulas were developed through nonlinear regression analyses,to calculate the ultimate strength of two-planar tubular KT-joints subjected to axial loading at elevated temperatures.
文摘BACKGROUND The response to axial physiological pressure due to load transfer to the lumbar spine structures is among the various back pain mechanisms.Understanding the spine adaptation to cumulative compressive forces can influence the choice of personalized treatment strategies.AIM To analyze the impact of axial load on the spinal canal’s size,intervertebral foramina,ligamenta flava and lumbosacral alignment.METHODS We assessed 90 patients using three-dimensional isotropic magnetic resonance imaging acquisition in a supine position with or without applying an axial compression load.Anatomical structures were measured in the lumbosacral region from L1 to S1 in lying and axially-loaded magnetic resonance images.A paired t test atα=0.05 was used to calculate the observed differences.RESULTS After axial loading,the dural sac area decreased significantly,by 5.2%on average(4.1%,6.2%,P<0.001).The intervertebral foramina decreased by 3.4%(2.7%,4.1%,P<0.001),except for L5-S1.Ligamenta flava increased by 3.8%(2.5%,5.2%,P<0.001),and the lumbosacral angle increased.CONCLUSION Axial load exacerbates the narrowing of the spinal canal and intervertebral foramina from L1-L2 to L4-L5.Cumulative compressive forces thicken ligamenta flava and exaggerate lumbar lordosis.
基金Sponsored by the National Natural Science Foundation of China (Grant No. 50708027)the National Key Technology Research and Development Program of China (Grant No.2006BAJ01B02)
文摘The behavior of square-tubed reinforced concrete (STRC) short columns subjected to axial compression was studied in detail with an accurate nonlinear finite element model (FEM) . Different width to thickness ratios (D/t = 50 150) of the steel tube and the compressive strength of concrete (C80 and C50) were adopted in this research. The axial load strength,steel tube strain and load-shortening response were determined from FEM and the analysis results from FEM were compared with those from experiment. The analysis and test results indicate that the concrete strength little affectes the confinement of the steel tube on the concrete. The transverse stress of the tube at the axial load point increases with the increment in the width to thickness ratio. Based on the results from FEM and experiment,a formula for the prediction of the axial load strength was proposed in this paper.
基金This study was supported by the Strategic Priority Research Program of the Chinese Academy of Science(Grant No.XDA20020102)Science and Technology Project of State Grid Corporation of China(Contract No.SGQHDKYOSBJS201600077)+1 种基金National Natural Science Foundation of China(Grant No.41101065)the State Key Laboratory of Frozen Soil Engineering Foundation(Grant No.SKLFSE-ZT-34)。
文摘The measurement of pile axial load is of great significance to determining pile foundation design parameters such as skin friction and end bearing capacity and analyzing load transfer mechanisms.Affected by the temperature and ice content of frozen ground,the interface contact relationship between pile foundation and frozen soil is complicated,making pile axial load measurements more uncertain than that in non-frozen ground.Therefore,it is necessary to gain an in-depth understanding of the current pile axial load test methods.Four methods are systematically reviewed:vibrating wire sensors,strain gauges,sliding micrometers,and optical fiber strain sensors.At the same time,the applicability of the four test methods in frozen soil regions is discussed in detail.The first two methods are mature and commonly used.The sliding micrometer is only suitable for short-term measurement.While the Fiber Bragg grating(FBG)strain gauge meets the monitoring requirements,the Brillouin optical time-domain reflectometer(BOTDR)needs further verification.This paper aims to provide a technical reference for selecting and applying different methods in the pile axial load test for the stability study and bearing capacity assessment of pile foundations in cold regions.
基金This research is funded by the grants from Dalian Project of Innovation Foundation of Science and Technology(No.2018J11CY005)Research Program of State Key Laboratory of Structural Analysis for Industrial Equipment(No.S18313).
文摘In this paper,the local buckling of cylindrical long shells is discussed under axial pulse loads in a Hamiltonian system.Using this system,critical loads and modes of buckling of shells are reduced to symplectic eigenvalues and eigensolutions respectively.By the symplectic method,the solution of the local buckling of shells can be employed to the expansion series of symplectic eigensolutions in this system.As a result,relationships between critical buckling loads and other factors,such as length of pulse load,thickness of shells and circumferential orders,have been achieved.At the same time,symmetric and unsymmetric buckling modes have been discuss.Moreover,numerical results show that modes of post-buckling of shells can be Bamboo node-type,bending type,concave type and so on.Research in this paper provides analytical supports for ultimate load prediction and buckling failure assessment of cylindrical long shells under local axial pulse loads.
基金the support of National Natural Science Foundation of China(Nos.51806004 and 51790511)National Science and Technology Major Project,China(No.2017-Ⅱ-0001-0013)。
文摘It is confirmed that tandem-blade configurations have potential to enlarge the flow turning in two-dimension(2D) studies. However, the potential of tandem blades to enlarge the design space for highly loaded axial compressors was rarely investigated in open literatures. The present work aims to show the capability of tandem blades to break the loading limit of conventional blades for highly loaded compressors. The 2D models of the maximum static pressure rise derived in previous work were validated by a large amount experimental data, which showed a good agreement. An E parameter was defined to evaluate the stall margin of compressor based on the theoretical models, which indicated that the tandem blade was able to increase the loading limit of axial compressors. A single-blade stage with a loading coefficient of 0.46(based on the blade tip rotating speed) was designed as the baseline case under the guidance of the E parameter. A tandem-blade stage was then designed by ensuring that the velocity triangles were similar to the single-blade stage. The performances of both stages were investigated experimentally. The results showed that the maximum efficiency of the tandem-blade stage was 92.8%, 1% higher than the single;the stall margin increased from 16.9% to 22.3%. Besides, the maximum pressure rise of tandem rotors was beyond the loading limit of 2D single-blade cascades, which confirmed the potential of tandem blades to break the loading limit of axial compressors.
文摘The Local Joint Flexibility(_(LJF))of steel K-joints reinforced with external plates under axial loads is investigated in this paper.For this aim,firstly,a finite element(FE)model was produced and verified with the results of several experimental tests.In the next step,a set of 150 FE models was generated to assess the effect of the brace angle(θ),the stiffener plate size(ηandλ),and the joint geometry(γ,τ,ξ,andβ)on the_(LJF)factor(f_(LJF)).The results showed that using the external plates can decrease 81%of the f_(LJF).Moreover,the reinforcing effect of the reinforcing plate on the f_(LJF)is more remarkable in the joints with smallerβ.Also,the effect of theγon the f_(LJF)ratio can be ignored.Despite the important effect of the f_(LJF)on the behavior of tubular joints,there is not available any study or equation on the f_(LJF)in any reinforced K-joints under axial load.Consequently,using the present FE results,a design parametric equation is proposed.The equation can reasonably predict the f_(LJF)in the reinforced K-joints under axial load.
文摘In this paper,the influence of geometric parameters on the stress concentration factors due to three different types of axial loading on 81 TY tubular structures is studied.Our results reveal that,geometric parameters have a considerable impact on the variation of stress concentration factors on tubular TY-joints under axial loads.Thus,the highest stress concentration factor values are observed on the vertical brace than on the inclined one.The finite element results of the tubular structures were verified by parametric equations and experimental data.A parametric study was carried out by analyses using the nonlinear regression method to obtain parametric equations.These equations are used to calculate stress concentration factors and to analyse the fatigue resistance of TY-joints due to axial loads.
基金Support provided by the Ministry of Industry and Information Technology of China(Grant No.JSZL2016204B102)the National Natural Science Foundation of China(Grant Nos.51575022 and 11772022).
文摘The transverse stiffness and vibration characteristics of discontinuous beams can significantly differ from those of continuous beams given that an abrupt change in stiffness may occur at the interface of the former.In this study,the equations for the deflection curve and vibration frequencies of a simply supported discontinuous beam under axial loads are derived analytically on the basis of boundary,continuity,and deformation compatibility conditions by using equivalent spring models.The equation for the deflection curve is solved using undetermined coefficient methods.The normal function of the transverse vibration equation is obtained by separating variables.The differential equations for the beam that consider moments of inertia,shearing effects,and gyroscopic moments are investigated using the transfer matrix method.The deflection and vibration frequencies of the discontinuous beam are studied under different axial loads and connection spring stiffness.Results show that deflection decreases and vibration frequencies increase exponentially with increasing connection spring stiffness.Moreover,both variables remain steady when connection spring stiffness reaches a considerable value.Lastly,an experimental study is conducted to investigate the vibration characteristics of a discontinuous beam with a curvic coupling,and the results exhibit a good match with the proposed model.
基金the National Natural Science Foundation of China(No.50679041)the Shanghai Leading Academic Discipline Project(No.B208)
文摘When diaphragm wall is used as the permanent vertical bearing structure,design standard of the bored pile adopted has to induce the risk or iste. The vertical load transfer mechanism and bearing capacity of the diaphragm wall are examined by a field testing program at the site in Shanghai soft clays. Test results indicate that the diaphragm wall almost behaves as a rigid body under the vertical load. It induces that the skin friction and the toe resistance of the wall develop simultaneously. The skin friction resistance carries the large portion of the vertical load,and the toe resistance of the wall provides about 9.2% of vertical bearing load. Toe-grouting technique is found to achieve a remarkable increase in skin friction and toe resistance. The toe resistance of the grouted wall provides about 17.5% of vertical load.