The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris ...The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris L.)is one of the most common and important conifers in Turkey,so a well-planned management schedule is critical.Diameter distribution models to accurately describe the stand structure help improve management strategies,but developing reliable models requires a deep understanding of the growth,output and constraints of the forests.The most important information derived by diameter distribution models is primary data on horizontal stand structure for each diameter class of trees:basal area and volume per unit area.These predictions are required to estimate the range of products and predicted volume and yield from a forest stand.Here,to construct an accurate,reliable diameter distribution model for natural Scots pine stands in the Türkmen Mountain region,we used Johnson’s SBdistribution to represent the empirical diameter distributions of the stands using ground-based measurements from 55 sample plots that included1219 trees in natural distribution zones of the forests.As an alternative,nonparametric approach,which does not require any predefined function,an artificial intelligence model was constructed based on support vector machine methodology.An error index was calculated to evaluate the results.Overall,both Johnson’s SB probability density function with a three-parameter recovery approach and the support vector regression methodology provided reliable estimates of the diameter distribution of these stands.展开更多
As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft ele...As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.展开更多
Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The...Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The experimental results show that the particle size distribution obeys two separate systems in the whole wedge-cast sample. Furthermore, it is found that the big clusters are pushed to the center of the wedge shaped sample and the single particle or small clusters consisting of few particles are engulfed into the α-Al in the area of the sample edge. The cluster degree of particles varies in different areas, and its value is 0.2 and 0.6 for the cluster fraction in the edge and in the center of the wedge sample, respectively. The cluster diameter does not obey the normal distribution but approximately obeys lognormal distribution in the present work. More importantly, in the whole sample, the particle size obeys two separate log-normal distributions.展开更多
Numerical investigation was performed to examine the effect of rear barrier pillar on stress distribution around a longwall face. Salamon theoretical formula was used to calculate the parameters of the caving zone, wh...Numerical investigation was performed to examine the effect of rear barrier pillar on stress distribution around a longwall face. Salamon theoretical formula was used to calculate the parameters of the caving zone, which was later assigned to double yield constitutive model in FLAC3 D. Numerical results demonstrate that high stress concentration zone exists above the region where the second open-off cut intersects with the rear barrier pillar due to stress transfer and plastic zone expansion. It is also found that the maximum vertical stresses with varied distance to the seam floor are all within the projective plane of the rear barrier pillar and their positions concentrate on the barrier pillar adjacent to the connection corner of the second open-off cut. In addition, position of the maximum vertical stresses abruptly transfer from the connection corner adjacent to former panel to that adjacent to current panel along the panel direction.展开更多
Objective The clinical significance of differential distribution of hepatitis B virus(HBV)nucleocapsid antigen in hepatocytes remains unknown.The goal of this study is to determine the relationship between distinct HB...Objective The clinical significance of differential distribution of hepatitis B virus(HBV)nucleocapsid antigen in hepatocytes remains unknown.The goal of this study is to determine the relationship between distinct HBV core antigen distribution pattern and alanine transaminase(ALT),liver histological inflammatory activity grades,serum HBeAg status and HBV DNA level.Methods Total of 958 cases with chronic hepatitis B were recruited into this study.Liver function tests,serum HBV DNA level,serological HBV markers and liver immunohistochemistry were examined according to the conventional instructions.Chi Square tests were performed to analyze the differences among these groups.Results It was found that 552(58%)cases were tested positive for HBV core antigen by immunohistochemical staining.Cytoplasmic hepatitis B core antigen(HBcAg)expression correlated with ALT level and serum HBV DNA and liver inflammatory activity scores,however,nuclear HBcAg expression in hepatocytes was associated with normal ALT level,lower liver inflammatory activity score and higher serum HBV DNA level and rate of HBeAg positivity.Both nuclear and cytoplasmic HBcAg expression in hepatocytes associated with a middle ALT level and liver inflammatory activity score,higher rate of serum detectable HBeAg and a higher HBV DNA level.However,undetectable core antigen was related to a lower ALT level and histological inflammatory activity grade,lower positive HBeAg rate and HBV DNA level.Conclusions Undetectable liver HBcAg is associated with HBV clearance,ALT normalization and hepatitis B e antigen(HBeAg)seroconversion,and cytoplasmic HBcAg expression associated with higher hepatic inflammatory activity.However,nuclear HBcAg expression correlates with immune tolerance characterized with normal ALT and lower liver inflammatory activity,higher HBV replication level and higher rate of HBeAg positivity.展开更多
To dates,most ship detection approaches for single-pol synthetic aperture radar（SAR） imagery try to ensure a constant false-alarm rate（CFAR）.A high performance ship detector relies on two key components：an accura...To dates,most ship detection approaches for single-pol synthetic aperture radar（SAR） imagery try to ensure a constant false-alarm rate（CFAR）.A high performance ship detector relies on two key components：an accurate estimation to a sea surface distribution and a fine designed CFAR algorithm.First,a novel nonparametric sea surface distribution estimation method is developed based on n-order Bézier curve.To estimate the sea surface distribution using n-order Bézier curve,an explicit analytical solution is derived based on a least square optimization,and the optimal selection also is presented to two essential parameters,the order n of Bézier curve and the number m of sample points.Next,to validate the ship detection performance of the estimated sea surface distribution,the estimated sea surface distribution by n-order Bézier curve is combined with a cell averaging CFAR（CA-CFAR）.To eliminate the possible interfering ship targets in background window,an improved automatic censoring method is applied.Comprehensive experiments prove that in terms of sea surface estimation performance,the proposed method is as good as a traditional nonparametric Parzen window kernel method,and in most cases,outperforms two widely used parametric methods,K and G0 models.In terms of computation speed,a major advantage of the proposed estimation method is the time consuming only depended on the number m of sample points while independent of imagery size,which makes it can achieve a significant speed improvement to the Parzen window kernel method,and in some cases,it is even faster than two parametric methods.In terms of ship detection performance,the experiments show that the ship detector which constructed by the proposed sea surface distribution model and the given CA-CFAR algorithm has wide adaptability to different SAR sensors,resolutions and sea surface homogeneities and obtains a leading performance on the test dataset.展开更多
We study the high order equilibrium distributions of a counting random variable. Properties such as moments, the probability generating function, the stop--loss transform and the mean residual lifetime, are derived. E...We study the high order equilibrium distributions of a counting random variable. Properties such as moments, the probability generating function, the stop--loss transform and the mean residual lifetime, are derived. Expressions are obtained for higher order equilibrium distribution functions under mixtures and convolutions of a counting distribution. Recursive formulas for higher order equilibrium distribution functions of the (a,b,0) -family of distributions are given.展开更多
To assist conservationists and policymakers in managing and protecting forests in Beijing from the effects of climate change,this study predicts changes for 2012–2112 in habitable areas of three tree species—Betula ...To assist conservationists and policymakers in managing and protecting forests in Beijing from the effects of climate change,this study predicts changes for 2012–2112 in habitable areas of three tree species—Betula platyphylla,Quercus palustris,Platycladus orientalis,plus other mixed broadleaf species—in Beijing using a classification and regression tree niche model under the International Panel on Climate Change’s A2 and B2 emissions scenarios(SRES).The results show that climate change will increase annual average temperatures in the Beijing area by 2.0–4.7℃,and annual precipitation by 4.7–8.5 mm,depending on the emissions scenario used.These changes result in shifts in the range of each of the species.New suitable areas for distributions of B.platyphylla and Q.palustris will decrease in the future.The model points to significant shifts in the distributions of these species,withdrawing from their current ranges and pushing southward towards central Beijing.Most of the ranges decline during the initial 2012–2040 period before shifting southward and ending up larger overall at the end of the 88-year period.The mixed broadleaf forests expand their ranges significantly.The P.orientalis forests,on the other hand,expand their range marginally.The results indicate that climate change and its effects will accelerate significantly in Beijing over the next 88 years.Water stress is likely to be a major limiting factor on the distribution of forests and the most important factor affecting migration of species into and out of existing nature reserves.There is a potential for the extinction of some species.Therefore,long-term vegetation monitoring and warning systems will be needed to protect local species from habitat loss and genetic swamping of native species by hybrids.展开更多
To reduce distribution transformer losses and carbon dioxide emissions, in recent years, the major countries in the world have issued mandatory standards for high-energy efficiency in distribution transformers. In 201...To reduce distribution transformer losses and carbon dioxide emissions, in recent years, the major countries in the world have issued mandatory standards for high-energy efficiency in distribution transformers. In 2013,China has carried out a new standard GB 20052-2013. To meet the update of the standard and energy efficiency,it is important to enhance the magnetic properties of core materials. The new products B18R065 and B20R070 which are developed by Baosteel, are successfully used for grade 1 energy efficiency distribution transformers. And Baosteel becomes one of the companies which can supply both the 0.20 mm and the 0.18 mm gauge grain oriented electrical steels （GOES） in the world. The development principle, material properties, and transformer performance of B18R065 and B20R070 were introduced,which were expected to be a useful reference for materials selection by transformer manufacturers.展开更多
MnxCd1-xln2Te4 (x=0.1) ingot was successfully grown by the modified Bridgman technique, which applied the accelerated crucible rotation technique (ACRT) in Bridgman process, or briefly ACRT-B. The growth interface pro...MnxCd1-xln2Te4 (x=0.1) ingot was successfully grown by the modified Bridgman technique, which applied the accelerated crucible rotation technique (ACRT) in Bridgman process, or briefly ACRT-B. The growth interface profile shape and the composition distribution in the MnxCd1-xln2Te4 (x=0.1) ingot were analyzed. Even though the stoichiometric composition was synthesized in the original ingot, the composition has been redistributed during the ACRT-B growth process. Mn and Cd contents decrease while In increases along the longitudinal axis. The partition ratios of solutes Mn, Cd and In at the growth interface are evaluated by a mathematical method based on the experimental data, which are found to be 1.286, 1.926 and 0.729 in α phase growth process, and 1.120, 1.055 and 0.985 in β phase growth process, respectively. In the radial direction, Mn and Cd contents increase while In decreases with the distance from the centerline of the ingot.展开更多
基金supported by Turkish General Directorate of Forestry。
文摘The diameter distribution of trees in a stand provides the basis for determining the stand’s ecological and economic value,its structure and stability and appropriate management practices.Scots pine(Pinus sylvestris L.)is one of the most common and important conifers in Turkey,so a well-planned management schedule is critical.Diameter distribution models to accurately describe the stand structure help improve management strategies,but developing reliable models requires a deep understanding of the growth,output and constraints of the forests.The most important information derived by diameter distribution models is primary data on horizontal stand structure for each diameter class of trees:basal area and volume per unit area.These predictions are required to estimate the range of products and predicted volume and yield from a forest stand.Here,to construct an accurate,reliable diameter distribution model for natural Scots pine stands in the Türkmen Mountain region,we used Johnson’s SBdistribution to represent the empirical diameter distributions of the stands using ground-based measurements from 55 sample plots that included1219 trees in natural distribution zones of the forests.As an alternative,nonparametric approach,which does not require any predefined function,an artificial intelligence model was constructed based on support vector machine methodology.An error index was calculated to evaluate the results.Overall,both Johnson’s SB probability density function with a three-parameter recovery approach and the support vector regression methodology provided reliable estimates of the diameter distribution of these stands.
文摘As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.
文摘Wedge-shaped copper casting experiment was conducted to study the engulfment behavior of TiB2 particle and the interaction between particle or cluster and the solid/liquid front in commercial pure aluminum matrix. The experimental results show that the particle size distribution obeys two separate systems in the whole wedge-cast sample. Furthermore, it is found that the big clusters are pushed to the center of the wedge shaped sample and the single particle or small clusters consisting of few particles are engulfed into the α-Al in the area of the sample edge. The cluster degree of particles varies in different areas, and its value is 0.2 and 0.6 for the cluster fraction in the edge and in the center of the wedge sample, respectively. The cluster diameter does not obey the normal distribution but approximately obeys lognormal distribution in the present work. More importantly, in the whole sample, the particle size obeys two separate log-normal distributions.
基金Projects(5147420851304208)supported by the National Natural Science Foundation of China+3 种基金Project supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)ChinaProject(SKLCRSM12X01)supported by the State Key Laboratory of Coal Resources and Mine SafetyChina University of Mining and Technology
文摘Numerical investigation was performed to examine the effect of rear barrier pillar on stress distribution around a longwall face. Salamon theoretical formula was used to calculate the parameters of the caving zone, which was later assigned to double yield constitutive model in FLAC3 D. Numerical results demonstrate that high stress concentration zone exists above the region where the second open-off cut intersects with the rear barrier pillar due to stress transfer and plastic zone expansion. It is also found that the maximum vertical stresses with varied distance to the seam floor are all within the projective plane of the rear barrier pillar and their positions concentrate on the barrier pillar adjacent to the connection corner of the second open-off cut. In addition, position of the maximum vertical stresses abruptly transfer from the connection corner adjacent to former panel to that adjacent to current panel along the panel direction.
文摘Objective The clinical significance of differential distribution of hepatitis B virus(HBV)nucleocapsid antigen in hepatocytes remains unknown.The goal of this study is to determine the relationship between distinct HBV core antigen distribution pattern and alanine transaminase(ALT),liver histological inflammatory activity grades,serum HBeAg status and HBV DNA level.Methods Total of 958 cases with chronic hepatitis B were recruited into this study.Liver function tests,serum HBV DNA level,serological HBV markers and liver immunohistochemistry were examined according to the conventional instructions.Chi Square tests were performed to analyze the differences among these groups.Results It was found that 552(58%)cases were tested positive for HBV core antigen by immunohistochemical staining.Cytoplasmic hepatitis B core antigen(HBcAg)expression correlated with ALT level and serum HBV DNA and liver inflammatory activity scores,however,nuclear HBcAg expression in hepatocytes was associated with normal ALT level,lower liver inflammatory activity score and higher serum HBV DNA level and rate of HBeAg positivity.Both nuclear and cytoplasmic HBcAg expression in hepatocytes associated with a middle ALT level and liver inflammatory activity score,higher rate of serum detectable HBeAg and a higher HBV DNA level.However,undetectable core antigen was related to a lower ALT level and histological inflammatory activity grade,lower positive HBeAg rate and HBV DNA level.Conclusions Undetectable liver HBcAg is associated with HBV clearance,ALT normalization and hepatitis B e antigen(HBeAg)seroconversion,and cytoplasmic HBcAg expression associated with higher hepatic inflammatory activity.However,nuclear HBcAg expression correlates with immune tolerance characterized with normal ALT and lower liver inflammatory activity,higher HBV replication level and higher rate of HBeAg positivity.
基金The National Natural Science Foundation of China under contract No.61471024the National Marine Technology Program for Public Welfare under contract No.201505002-1the Beijing Higher Education Young Elite Teacher Project under contract No.YETP0514
文摘To dates,most ship detection approaches for single-pol synthetic aperture radar（SAR） imagery try to ensure a constant false-alarm rate（CFAR）.A high performance ship detector relies on two key components：an accurate estimation to a sea surface distribution and a fine designed CFAR algorithm.First,a novel nonparametric sea surface distribution estimation method is developed based on n-order Bézier curve.To estimate the sea surface distribution using n-order Bézier curve,an explicit analytical solution is derived based on a least square optimization,and the optimal selection also is presented to two essential parameters,the order n of Bézier curve and the number m of sample points.Next,to validate the ship detection performance of the estimated sea surface distribution,the estimated sea surface distribution by n-order Bézier curve is combined with a cell averaging CFAR（CA-CFAR）.To eliminate the possible interfering ship targets in background window,an improved automatic censoring method is applied.Comprehensive experiments prove that in terms of sea surface estimation performance,the proposed method is as good as a traditional nonparametric Parzen window kernel method,and in most cases,outperforms two widely used parametric methods,K and G0 models.In terms of computation speed,a major advantage of the proposed estimation method is the time consuming only depended on the number m of sample points while independent of imagery size,which makes it can achieve a significant speed improvement to the Parzen window kernel method,and in some cases,it is even faster than two parametric methods.In terms of ship detection performance,the experiments show that the ship detector which constructed by the proposed sea surface distribution model and the given CA-CFAR algorithm has wide adaptability to different SAR sensors,resolutions and sea surface homogeneities and obtains a leading performance on the test dataset.
文摘We study the high order equilibrium distributions of a counting random variable. Properties such as moments, the probability generating function, the stop--loss transform and the mean residual lifetime, are derived. Expressions are obtained for higher order equilibrium distribution functions under mixtures and convolutions of a counting distribution. Recursive formulas for higher order equilibrium distribution functions of the (a,b,0) -family of distributions are given.
基金This research was supported by the Fundamental Research Funds for the Central University(2018RD001).
文摘To assist conservationists and policymakers in managing and protecting forests in Beijing from the effects of climate change,this study predicts changes for 2012–2112 in habitable areas of three tree species—Betula platyphylla,Quercus palustris,Platycladus orientalis,plus other mixed broadleaf species—in Beijing using a classification and regression tree niche model under the International Panel on Climate Change’s A2 and B2 emissions scenarios(SRES).The results show that climate change will increase annual average temperatures in the Beijing area by 2.0–4.7℃,and annual precipitation by 4.7–8.5 mm,depending on the emissions scenario used.These changes result in shifts in the range of each of the species.New suitable areas for distributions of B.platyphylla and Q.palustris will decrease in the future.The model points to significant shifts in the distributions of these species,withdrawing from their current ranges and pushing southward towards central Beijing.Most of the ranges decline during the initial 2012–2040 period before shifting southward and ending up larger overall at the end of the 88-year period.The mixed broadleaf forests expand their ranges significantly.The P.orientalis forests,on the other hand,expand their range marginally.The results indicate that climate change and its effects will accelerate significantly in Beijing over the next 88 years.Water stress is likely to be a major limiting factor on the distribution of forests and the most important factor affecting migration of species into and out of existing nature reserves.There is a potential for the extinction of some species.Therefore,long-term vegetation monitoring and warning systems will be needed to protect local species from habitat loss and genetic swamping of native species by hybrids.
文摘To reduce distribution transformer losses and carbon dioxide emissions, in recent years, the major countries in the world have issued mandatory standards for high-energy efficiency in distribution transformers. In 2013,China has carried out a new standard GB 20052-2013. To meet the update of the standard and energy efficiency,it is important to enhance the magnetic properties of core materials. The new products B18R065 and B20R070 which are developed by Baosteel, are successfully used for grade 1 energy efficiency distribution transformers. And Baosteel becomes one of the companies which can supply both the 0.20 mm and the 0.18 mm gauge grain oriented electrical steels （GOES） in the world. The development principle, material properties, and transformer performance of B18R065 and B20R070 were introduced,which were expected to be a useful reference for materials selection by transformer manufacturers.
基金This research is supported by the National Natural Science Foundation of China under the contract No.59872027 and 59825109.
文摘MnxCd1-xln2Te4 (x=0.1) ingot was successfully grown by the modified Bridgman technique, which applied the accelerated crucible rotation technique (ACRT) in Bridgman process, or briefly ACRT-B. The growth interface profile shape and the composition distribution in the MnxCd1-xln2Te4 (x=0.1) ingot were analyzed. Even though the stoichiometric composition was synthesized in the original ingot, the composition has been redistributed during the ACRT-B growth process. Mn and Cd contents decrease while In increases along the longitudinal axis. The partition ratios of solutes Mn, Cd and In at the growth interface are evaluated by a mathematical method based on the experimental data, which are found to be 1.286, 1.926 and 0.729 in α phase growth process, and 1.120, 1.055 and 0.985 in β phase growth process, respectively. In the radial direction, Mn and Cd contents increase while In decreases with the distance from the centerline of the ingot.
