Comparison of transport coefficients before and after density pump-out induced by resonant magnetic perturbation using a BOUT++ six-field model on the EAST tokamak

Many experiments have demonstrated that resonant magnetic perturbation(RMP) can affect the turbulent transport at the edge of the tokamak. Through the Experimental Advanced Superconducting Tokamak(EAST) density modulation experiment, the particle transport coefficients were calculated using the experimental data, and the result shows that the particle transport coefficients increase with RMP. In this study, the six-field two-fluid model in BOUT++ is used to simulate the transport before and after density pump-out induced by RMP,respectively referred as the case without RMP and the case with RMP. In the linear simulations,the instabilities generally decreases for cases with RMP. In the nonlinear simulation, ELM only appears in the case without RMP. Additionally, the particle transport coefficient was analyzed,and the result shows that the particle transport coefficient becomes larger for the case with RMP,which is consistent with the experimental conclusion. Moreover, its magnitude is comparable to the results calculated from experimental data.

Molecular Dynamics, Diffusion Coefficients and Activation Energy of the Electrolyte (Anode) in Lithium (Li and Li+), Sodium (Na and Na+) and Potassium (K and K+)

This work is a simulation modelling with the LAMMPS calculation code of an electrode based on alkali metals (lithium, sodium and potassium) using the MEAM potential. For different multiplicities, two models were studied;with and without gap. In this work, we present the structural, physical and chemical properties of the lithium, sodium and potassium electrodes. For the structural properties, the cohesive energy and the mesh parameters were calculated, revealing that, whatever the chemical element selected, the compact hexagonal hcp structure is the most stable, followed by the face-centred cubic CFC structure, and finally the BCC structure. The most stable structure is lithium, with a cohesion energy of -6570 eV, and the lowest bcc-hcp transition energy of -0.553 eV/atom, followed by sodium. For physical properties, kinetic and potential energies were calculated for each of the sectioned chemical elements, with lithium achieving the highest value. Finally, for the chemical properties, we studied the diffusion coefficient and the activation energy. Only potassium followed an opposite order to the other two, with the quantities with lacunae being greater than those without lacunae, whatever the multiplicity. The order of magnitude of the diffusion coefficients is given by the relationship DLi > DNa > Dk for the multiplicity 6*6*6, while for the activation energy the order is reversed.

Normalized glandular dose coefficients for digital breast tomosynthesis using detailed Chinese breast models

The rise in breast cancer diagnoses among Chinese women has necessitated the use of X-ray breast screening,which carries a radiation risk.This study aimed to provide a dosimetry protocol for the Chinese female population to replace the traditional standard that utilizes simplified breast models,for the accurate estimation of the mean glandular dose of a patient undergoing digital breast tomosynthesis(DBT).The first set of detailed Chinese female breast models and representative breast parameters was constructed.Considering backscatter radiation and computational efficiency,we improved the combination of these models and the Chinese reference adult female whole-body voxel phantom.Image acquisition for four commercial DBT systems that are widely employed in China was simulated using the Monte Carlo method to obtain the normalized glandular dose coefficients of DBT(D_(gN)^(DBT))and the glandular depth dose(D_(g)^(dep)(z))for different breast characteristics and X-ray spectra.We calculated a series of D_(gN)^(DBT) values for breasts with different percentage mass glandularities(5%,25%,50%,75%,and 100%)and compressed breast thicknesses(2,3,4,5,6,and 7 cm)at various tube potentials(25,28,30,32,35,and 49 kV)and target/filter combinations(W/Rh,W/Al,Mo/Mo,Rh/Rh,and Rh/Ag).The parameter dependence of the breast characteristics and beam conditions on D_(gN)^(DBT) in detailed breast models was investigated.The D_(gN)^(DBT) results were 14.6-51.0%lower than those of the traditional dosimetry standard in China.The difference in D_(gN)^(DBT) was mainly due to a decrease in the depth of the main energy deposition area caused by the glandular distribution along the depth direction.The results obtained in this study may be used to improve breast dosimetry in China and provide more detailed information on risk assessment during DBT.

Adaptive Random Effects/Coefficients Modeling

Adaptive fractional polynomial modeling of general correlated outcomes is formulated to address nonlinearity in means, variances/dispersions, and correlations. Means and variances/dispersions are modeled using generalized linear models in fixed effects/coefficients. Correlations are modeled using random effects/coefficients. Nonlinearity is addressed using power transforms of primary (untransformed) predictors. Parameter estimation is based on extended linear mixed modeling generalizing both generalized estimating equations and linear mixed modeling. Models are evaluated using likelihood cross-validation (LCV) scores and are generated adaptively using a heuristic search controlled by LCV scores. Cases covered include linear, Poisson, logistic, exponential, and discrete regression of correlated continuous, count/rate, dichotomous, positive continuous, and discrete numeric outcomes treated as normally, Poisson, Bernoulli, exponentially, and discrete numerically distributed, respectively. Example analyses are also generated for these five cases to compare adaptive random effects/coefficients modeling of correlated outcomes to previously developed adaptive modeling based on directly specified covariance structures. Adaptive random effects/coefficients modeling substantially outperforms direct covariance modeling in the linear, exponential, and discrete regression example analyses. It generates equivalent results in the logistic regression example analyses and it is substantially outperformed in the Poisson regression case. Random effects/coefficients modeling of correlated outcomes can provide substantial improvements in model selection compared to directly specified covariance modeling. However, directly specified covariance modeling can generate competitive or substantially better results in some cases while usually requiring less computation time.

Thermomechanical Dynamics (TMD) and Bifurcation-Integration Solutions in Nonlinear Differential Equations with Time-Dependent Coefficients

The new independent solutions of the nonlinear differential equation with time-dependent coefficients (NDE-TC) are discussed, for the first time, by employing experimental device called a drinking bird whose simple back-and-forth motion develops into water drinking motion. The solution to a drinking bird equation of motion manifests itself the transition from thermodynamic equilibrium to nonequilibrium irreversible states. The independent solution signifying a nonequilibrium thermal state seems to be constructed as if two independent bifurcation solutions are synthesized, and so, the solution is tentatively termed as the bifurcation-integration solution. The bifurcation-integration solution expresses the transition from mechanical and thermodynamic equilibrium to a nonequilibrium irreversible state, which is explicitly shown by the nonlinear differential equation with time-dependent coefficients (NDE-TC). The analysis established a new theoretical approach to nonequilibrium irreversible states, thermomechanical dynamics (TMD). The TMD method enables one to obtain thermodynamically consistent and time-dependent progresses of thermodynamic quantities, by employing the bifurcation-integration solutions of NDE-TC. We hope that the basic properties of bifurcation-integration solutions will be studied and investigated further in mathematics, physics, chemistry and nonlinear sciences in general.

Impacts of Surface Exchange Coefficients on Simulations of Super Typhoon Megi(2010)Using a Coupled Ocean-Atmosphere-Wave Model

In this study,the effects of surface exchange coefficients on simulations of Super Typhoon Megi(2010)are investigated using a fully coupled ocean-atmosphere-wave model.Several experiments are conducted using different parameterization schemes for the drag(C_(D))and enthalpy exchange(C_(K))coefficients.For the selected case,considering only the leveling-off of C_(D)at high wind speeds does not effectively improve the simulated typhoon track,intensity,or size.We found that increasing C_(K)monotonically with wind speed(Komori et al.,2018)yields stronger winds and deeper pressures by enhancing latent and sensible heat fluxes,but typhoon intensity remains underestimated.We propose a new higher C_(K)than that from Komori et al.(2018)based on the theory of Emanuel(1995).This approach produces a greater modeled typhoon intensity that is in good agreement with the best track data and effectively improves the track error for the simulation.Improved accuracy for modeled typhoon intensity is achieved with the new coefficient because C_(K)/C_(D)reaches the threshold of about 0.75 predicted by Emanuel(1995).The new proposed C_(K)also results in a reasonably accurate modeled sea surface temperature.However,typhoon size and surface wave height are overestimated.This finding implies that more numerical tests for tropical cyclones of different nature(such as strong,weak,dissipating,rapidly intensifying,or weakening tropical cyclones)should be studied,and more physical processes should be explored in future coupled models.

THE FEKETE-SZEG?INEQUALITY AND SUCCESSIVE COEFFICIENTS DIFFERENCE FOR A SUBCLASS OF CLOSE-TO-STARLIKE MAPPINGS IN COMPLEX BANACH SPACES

Let C be the familiar class of normalized close-to-convex functions in the unit disk.In[17],Koepf demonstrated that,as to a function■in the class C,■By applying this inequality,it can be proven that‖a3|-|a2‖≤1 for close-to-convex functions.Now we generalized the above conclusions to a subclass of close-to-starlike mappings defined on the unit ball of a complex Banach space.

Theoretical calculations on Landé g-factors and quadratic Zeeman shift coefficients of nsnp ^(3)P_(0)^(o) clock states in Mg and Cd optical lattice clocks

The study of magnetic field effects on the clock transition of Mg and Cd optical lattice clocks is scarce.In this work,the hyperfine-induced Landég-factors and quadratic Zeeman shift coefficients of the nsnp ^(3)P_(0)^(o) clock states for ^(111,113)Cd and ^(25)Mg were calculated by using the multi-configuration Dirac–Hartree–Fock theory.To obtain accurate values of these parameters,the impact of electron correlations and furthermore the Breit interaction and quantum electrodynamical effects on the Zeeman and hyperfine interaction matrix elements,and energy separations were investigated in detail.We also estimated the contributions from perturbing states to the Landég-factors and quadratic Zeeman shift coefficients concerned so as to truncate the summation over the perturbing states without loss of accuracy.Our calculations provide important data for estimating the first-and second-order Zeeman shifts of the clock transition for the Cd and Mg optical lattice clocks.

Darboux transformation,infinite conservation laws,and exact solutions for the nonlocal Hirota equation with variable coefficients

This article presents the construction of a nonlocal Hirota equation with variable coefficients and its Darboux transformation.Using zero-seed solutions,1-soliton and 2-soliton solutions of the equation are constructed through the Darboux transformation,along with the expression for N-soliton solutions.Influence of coefficients that are taken as a function of time instead of a constant,i.e.,coefficient functionδ(t),on the solutions is investigated by choosing the coefficient functionδ(t),and the dynamics of the solutions are analyzed.This article utilizes the Lax pair to construct infinite conservation laws and extends it to nonlocal equations.The study of infinite conservation laws for nonlocal equations holds significant implications for the integrability of nonlocal equations.

Nondegenerate solitons of the(2+1)-dimensional coupled nonlinear Schrodinger equations with variable coefficients in nonlinear optical fibers

We derive the multi-hump nondegenerate solitons for the(2+1)-dimensional coupled nonlinear Schrodinger equations with propagation distance dependent diffraction,nonlinearity and gain(loss)using the developing Hirota bilinear method,and analyze the dynamical behaviors of these nondegenerate solitons.The results show that the shapes of the nondegenerate solitons are controllable by selecting different wave numbers,varying diffraction and nonlinearity parameters.In addition,when all the variable coefficients are chosen to be constant,the solutions obtained in this study reduce to the shape-preserving nondegenerate solitons.Finally,it is found that the nondegenerate two-soliton solutions can be bounded to form a double-hump two-soliton molecule after making the velocity of one double-hump soliton resonate with that of the other one.

Review of All Possible Conversion Equations of Influence Coefficients with Different Formats on Two-Plane Balancing

This article lists all possible conversion equations of influence coefficients(ICs)with different formats when some of these are known to handle two-plane balancing tasks with no or less trial weight runs.There are two approaches for two-plane balancing.One can treat it as a multi-plane balance problem involving a 2×2 matrix of complex ICs where two direct ICs along with two cross-effect ICs are generated so that correction weights at one or two balance planes can be determined.One can also apply a static pare(in-phase)and/or couple pair(180 degrees out-of-phase)weights for balancing.The latter approach has been used quite often in the field,especially on steam turbine and generator rotors.Dependent on vibration mode shapes and combinations as well as balance plane accessibility,sometimes applying static or couple pair weights can be a wise choice;other times weights at one or two end planes are needed.There are totally 4 possible sets of IC data due to weights at plane 1,plane 2,static pair,and couple pair.IC data would typically be obtained by applying trial weights followed by trial weight runs.It is found,however,that all these IC data can be converted easily without trial weight runs once any two of 4 sets are known.The above findings and conversion equations have been obtained analytically and verified by experimental results.Real cases are given to demonstratetheirapplications.

Particle residence time distribution and axial dispersion coefficient in a pressurized circulating fluidized bed by using multiphase particle-in-cell simulation

The particle residence time distribution(RTD)and axial dispersion coefficient are key parameters for the design and operation of a pressurized circulating fluidized bed(PCFB).In this study,the effects of pressure(0.1-0.6 MPa),fluidizing gas velocity(2-7 m·s^(-1)),and solid circulation rate(10-90 kg·m^(-2)·s^(-1))on particle RTD and axial dispersion coefficient in a PCFB are numerically investigated based on the multiphase particle-in-cell(MP-PIC)method.The details of the gas-solid flow behaviors of PCFB are revealed.Based on the gas-solid flow pattern,the particles tend to move more orderly under elevated pressures.With an increase in either fluidizing gas velocity or solid circulation rate,the mean residence time of particles decreases while the axial dispersion coefficient increases.With an increase in pressure,the core-annulus flow is strengthened,which leads to a wider shape of the particle RTD curve and a larger mean particle residence time.The back-mixing of particles increases with increasing pressure,resulting in an increase in the axial dispersion coefficient.

GCAGA: A Gini Coefficient-Based Optimization Strategy for Computation Offloading in Multi-User-Multi-Edge MEC System

To support the explosive growth of Information and Communications Technology(ICT),Mobile Edge Comput-ing(MEC)provides users with low latency and high bandwidth service by offloading computational tasks to the network’s edge.However,resource-constrained mobile devices still suffer from a capacity mismatch when faced with latency-sensitive and compute-intensive emerging applications.To address the difficulty of running computationally intensive applications on resource-constrained clients,a model of the computation offloading problem in a network consisting of multiple mobile users and edge cloud servers is studied in this paper.Then a user benefit function EoU(Experience of Users)is proposed jointly considering energy consumption and time delay.The EoU maximization problem is decomposed into two steps,i.e.,resource allocation and offloading decision.The offloading decision is usually given by heuristic algorithms which are often faced with the challenge of slow convergence and poor stability.Thus,a combined offloading algorithm,i.e.,a Gini coefficient-based adaptive genetic algorithm(GCAGA),is proposed to alleviate the dilemma.The proposed algorithm optimizes the offloading decision by maximizing EoU and accelerates the convergence with the Gini coefficient.The simulation compares the proposed algorithm with the genetic algorithm(GA)and adaptive genetic algorithm(AGA).Experiment results show that the Gini coefficient and the adaptive heuristic operators can accelerate the convergence speed,and the proposed algorithm performs better in terms of convergence while obtaining higher EoU.The simulation code of the proposed algorithm is available:https://github.com/Grox888/Mobile_Edge_Computing/tree/GCAGA.

The medium-temperature dependence of jet transport coefficient in high-energy nucleus-nucleus collisions

The medium-temperature T dependence of the jet transport coefficient̂q was studied via the nuclear modification factor RAA(pT)and elliptical flow parameter v_(2)(pT)for large transverse momentum pT hadrons in high-energy nucleus-nucleus collisions.Within a next-to-leading-order perturbative QCD parton model for hard scatterings with modified fragmentation functions due to jet quenching controlled bŷq,we check the suppression and azimuthal anisotropy for large pT hadrons,and extract̂q by global fits to RAA(pT)and v_(2)(pT)data in A+A collisions at RHIC and LHC,respectively.The numerical results from the best fits show that̂q∕T^(3) goes down with local medium-temperature T in the parton jet trajectory.Compared with the case of a constant̂q∕T^(3),the going-down T dependence of̂q∕T^(3) makes a hard parton jet to lose more energy near Tc and therefore strengthens the azimuthal anisotropy for large pT hadrons.As a result,v_(2)(pT)for large pT hadrons was enhanced by approximately 10%to better fit the data at RHIC/LHC.Considering the first-order phase transition from QGP to the hadron phase and the additional energy loss in the hadron phase,v_(2)(pT)is again enhanced by 5-10%at RHIC/LHC.

Stability and accuracy of central difference method for real-time dynamic substructure testing considering mass participation coefficient

For real-time dynamic substructure testing(RTDST),the influence of the inertia force of fluid specimens on the stability and accuracy of the integration algorithms has never been investigated.Therefore,this study proposes to investigate the stability and accuracy of the central difference method(CDM)for RTDST considering the specimen mass participation coefficient.First,the theory of the CDM for RTDST is presented.Next,the stability and accuracy of the CDM for RTDST considering the specimen mass participation coefficient are investigated.Finally,numerical simulations and experimental tests are conducted for verifying the effectiveness of the method.The study indicates that the stability of the algorithm is affected by the mass participation coefficient of the specimen,and the stability limit first increases and then decreases as the mass participation coefficient increases.In most cases,the mass participation coefficient will increase the stability limit of the algorithm,but in specific circumstances,the algorithm may lose its stability.The stability and accuracy of the CDM considering the mass participation coefficient are verified by numerical simulations and experimental tests on a three-story frame structure with a tuned liquid damper.

Evaluation of the coefficient of lateral stress at rest of granular materials under repetitive loading conditions

Although the internal stress state of soils can be affected by repetitive loading,there are few studies evaluating the lateral stress(or K_(0))of soils under repetitive loading.This study investigates the changes in K_(0) and directional shear wave velocity(V_(s))in samples of two granular materials with different particle shapes during repetitive loading.A modified oedometer cell equipped with bender elements and a diaphragm transducer was developed to measure the variations in the lateral stress and the shear wave velocity,under repetitive loading on the loading and unloading paths.The study produced the following results:(1)Repetitive loading on the loading path resulted in an increase in the K_(0) of test samples as a function of cyclic loading number(i),and(2)Repetitive loading on the unloading path resulted in a decrease in K_(0) according to i.The shear wave velocity ratio(i.e.V_(s)(HH)/V_(s)(VH),where the first and second letters in parentheses corresponds to the directions of wave propagation and particle motion,respectively,and V and H corresponds to the vertical and horizontal directions,respectively)according to i supports the experimental observations of this study.However,when the tested material was in lightly over-consolidated state,there was an increase in K_(0) during repetitive loading,indicating that it was the initial K_(0),rather than the loading path,which is responsible for the change in K_(0).The power model can capture the variation in the K_(0) of samples according to i.Notably,the K_(0)=1 line acts as the boundary between the increase and decrease in K_(0) under repetitive loading.

Effect of Size and Initial Water Content on the Effective Diffusion Coefficient during Convective Drying of Sweet Potato Cut into Cubic and Cylindrical Shapes

In this article, we investigated the influence of size and initial water content on the effective diffusion coefficient of sweet potatoes samples cut into cubic and cylindrical shapes. The sizes of the cubic samples are 0.5, 1, 1.5, 1.75, 2, 2.5 and 3 cm edge with a respective initial water content of 2.7, 3.76, 3.48, 2.68, 3.28, 2.17 and 2.29 kg/kgms. For cylindrical samples, the radius is set at 0.5 cm and sample heights are 1, 1.5, 2, 2.5, 3, 3.5 and 4 cm with respective water contents of 2.2, 3.19, 2.85, 2.1, 2.17, 2.39 and 2.03 kg/kgms. The effective diffusion coefficients of cubic samples are of the order of 10−10 and 10−9 m2∙s−1 grew with sample edge. As for the cylindrical samples, the effective diffusion coefficients were of the order of 10−9 m2∙s−1 and there was no linear correlation between cylinder height and their effective diffusion coefficient. As for the examination of the initial water content on the effective diffusion coefficient, it turned out that the initial water content had no influence on the effective diffusion coefficient of the sweet potato samples.

Determination of Natural Logarithm of Diffusion Coefficient and Activation Energy of Thin Layer Drying Process of Ginger Rhizome Slices

This study is an extension of the previous work done with ARS-680 Environmental Chamber. Drying is a complex operation that demands much energy and time. Drying is essentially important for preservation of ginger rhizome. Drying of ginger was modeled, and then the effective diffusion coefficient and activation energy were determined. For this purpose, the experiments were done at six levels of varied temperatures: 10°C, 20°C, 30°C, 40°C, 50°C and 60°C. The values of effective diffusion coefficients obtained in this work for the variously treated ginger rhizomes closely agreed with the average effective diffusion coefficients of other notable authors who determined the drying kinetics and convective heat transfer coefficients of ginger slices.

Constitutive relation of an orthorhombic polycrystal with the shape coefficients

An orthorhombic polycrystal is an orthorhombic aggregate of tiny crystallites. In this paper, we study the effect of the crystalline mean shape on the constitutive relation of the orthorhombic polycrystal. The crystalline mean shape and the crystalline orientation arrangement are described by the crystalline shape function （CSF） and the orientation distribution function （ODF）, respectively. The CSF and the ODF are expanded as an infinite series in terms of the Wigner D-functions. The expanded coefficients of the CSF and the ODF are called the shape coefficients s^lm0 and the texture coefficients c^lmn respectively. Assuming that Ceff in the constitutive relation depends on the shape coefficients s^lm0 and the texture coefficients c^lmn by the principle of material frame-indifference we derive an analytical expression for C^eff up to terms linear in s^lmo and c^lmn and the expression would be applicable to the polycrystal whose texture is weak and whose crystalline mean shape has weak anisotropy. C^cff contains six unspecified material constants （λ, μ, c, s1, s2, s3）, five shape coefficients （s^2 00, s^2 20, s^4 00, s^4 20, s^4 40）, and three texture coefficients （c^4 99,c^4 20, c^4 40）, The results based on the perturbation approach are used to determine the five material constants approximately. We also find that the shape coefficients 2 and a s^2mo and s^4m0 are all zero if the crystalline mean shape is a cuboid. Some examples are given to compare our computational results.

ON THE COEFFICIENTS OF SEVERAL CLASSES OF BI-UNIVALENT FUNCTIONS

In this paper, we investigate the bounds of the coefficients of several classes of bi-univalent functions. The results presented in this paper improve of generalize the recent works of other authors.