Platform Evolution in an Oligo-Miocene Back-arc Basin:An Example from the Central Iran Basin

The Qom Formation is the most important hydrocarbon reservoir target in Central Iran.The Qom platform developed in a back-arc basin during the Oligo-Miocene due to the closing of the Tethyan Seaway.This formation consists of a variety of carbonate and non-carbonate facies deposited on a platform ranging from supratidal to basin.A combination of tectonic and eustatic events led to some lateral and vertical facies variations in the study area.Six third-order depositional sequences and related surfaces were identified regarding vertical facies changes in the studied sections of this Oligo-Miocene succession.According to all results and data,this succession was initially deposited during the Chattian upon a distally steepened ramp of siliciclastic-carbonate composition,including the Bouma sequence.Then,from the late Chattian to the Aquitanian,the platform changed into a homoclinal carbonate ramp with a gentle profile.With respect to tectonic activity,this phase was a calm period during the deposition of the Qom Formation.Finally,a drowned carbonate platform and a rimmed shelf emerged during the Burdigalian,terminated by the continental deposits of the Upper Red Formation.Regarding all geological characteristics,three main tectono-eustatic evolutionary phases have been recognized in the Qom back-arcbasin.

Elemental Compositions of Clinopyroxenes from Southern Okinawa Trough Basalt:Implications for Magmatism and Structural Environment in an Initial Back-Arc Basin

The major and trace elemental compositions of clinopyroxene from basalt were used to characterize the nature of the primitive magma and structural environment beneath the southern Okinawa Trough(SOT),which is an initial back-arc basin at a continental margin.The clinopyroxenes in the basalt were augite with variable Mg^(#)contents(73.37-78.22).The regular variations in major oxide contents(i.e.,CaO,FeO,TiO_(2),and Cr)with decreasing Mg#implied that the clinopyroxenes evolved from being enriched in Mg,Ca,and Cr to being enriched in Fe and Ti.The clinopyroxenes had relatively low rare earth element concentrations(7.51×10^(-6) to 12.68×10^(-6))and negative Eu anomalies(δEu=0.67-0.95).The Kd_(cpx) values of clinopyroxenes(0.2-0.26),which were used to examine whether the clinopyroxene was equilibrated with its host basalt,demonstrate that these clinopyroxene phenocrysts were not captured crystals but were instead produced by crystallization differentiation of the magma.The calculated clinopyroxene crystallization temperatures showed a narrow range of 990-1061℃,and their crystallization pressures ranged from 2.0 to 3.2 kbar.The geochemistry features of these clinopyroxenes indicated that the parent magma belonged to the subalkaline tholeiitic magma series and suggested that the magma experienced crystallization differentiation of olivine,plagioclase,and clinopyroxene,where the crystallization of plagioclase occurred earlier than that of clinopyroxene.Combined with geophysical data,this research on primitive magma and its crystallization differentiation from clinopyroxene indicates that the SOT is in the stage of‘seafloor spreading’and that basaltic rocks produced from tholeiitic magma represent the generation of oceanic crust.

Characteristics and genetic mechanism of the Mesoproterozoic rift system,Ordos Basin,China

The Mesoproterozoic rifts are developed in the Ordos Basin located in the western margin of the North China Plate.Based on the latest 3D seismic data and previous research results,this study intends to discuss the zonal differential deformation characteristics and genetic mechanism of the Mesoproterozoic rifts in the Ordos Basin.NE-trending rifts are developed in the Mesoproterozoic in the south-central Ordos Basin,the main part of which are located near the western margin of the North China Plate.NNW-trending rifts are developed in the north of the basin,while NW-NNW rifts in the Mesoproterozoic in Hangjinqi area.The genetic mechanism of the Mesoproterozoic rifts is related to regional extensional stress field,plate boundary conditions and internal preexisting structures.The main extensional stress direction strikes NWW-SSE(120°)in the western margin of the North China Plate,based on the forward rift trend of the northern Mesoproterozoic.In Hangjinqi area,the reactivation of the existing NWtrending Wulansu fault and NW-NW-trending Daolao fault,results in dextral shear stress field.The boundary between the western margin of the North China Plate and its adjacent plates forms a nearly NS-trending preexisting basement tectonic belt,which intersects with the NWW-SSE(120°)extensional stress at an acute angle of 60°.Therefore,the western margin of the North China Plate is formed by oblique normal faults under oblique extension.Due to the long time span of Columbia Supercontinent breakup(1.8e1.6 Ga),the oblique rift in the south-central Ordos Basin is formed under the continuous oblique extension at the western margin of the North China Plate.

Iteration and evaluation of shale oil development technology for continental rift lake basins

By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.

Geological characteristics of the southern segment of the Late Sinian–Early Cambrian Deyang-Anyue rift trough in Sichuan Basin, SW China

Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.

Structural features and exploration targets of platform margins in Sinian Dengying Formation in Deyang-Anyue Rift, Sichuan Basin, SW China

Based on the seismic, logging, drilling and other data, the distribution, structural types and mound-shoal hydrocarbon accumulation characteristics of platform margins of the Sinian Dengying Formation in the Deyang-Anyue Rift and its periphery were analyzed. Four types of platform margins are developed in the Dengying Formation, i.e., single-stage fault-controlled platform margin, multi-stage fault-controlled platform margin, gentle slope platform margin, and overlapping platform margin. In the Gaoshiti West-Weiyuan East area, single-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in nearly NEE direction and are shielded by faults and mudstones, forming fault-controlled–lithologic traps. In the Lezhi-Penglai area, independent and multi-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in NE direction and are controlled by synsedimentary faults;the mound-shoal complexes are aggraded and built on the hanging walls of the faults, and they are shielded by tight intertidal belts and the Lower Cambrian source rocks in multiple directions, forming fault-controlled–lithologic and other composite traps. In the Weiyuan-Ziyang area, gentle slope platform margins are developed in the Deng 2 Member, which trend in NW direction;the mound-shoal complexes are mostly thin interbeds as continuous bands and shielded by tight intertidal belts in the updip direction, forming lithologic traps. In the Gaoshiti-Moxi-Yanting area, overlapping platform margins are developed in the Deng 2 and Deng 4 members;the mound-shoal complexes are aggraded and overlaid to create platform margin buildup with a huge thickness and sealed by tight intertidal belts and the Lower Cambrian mudstones in the updip direction, forming large-scale lithologic traps on the north slope of the Central Sichuan Paleouplift. To summarize, the mound-shoal complexes on the platform margins in the Dengying Formation in the Penglai-Zhongjiang area, Moxi North-Yanting area and Weiyuan-Ziyang area are large in scale, with estimated resources of 1.58×1012 m3, and they will be the key targets for the future exploration of the Dengying Formation in the Sichuan Basin.

Extensional structures of the Nan'an Basin in the rifting tip of the South China Sea: Implication for tectonic evolution of the southwestern continental margin

Nan'an Basin is a giant hydrocarbon basin,but its tectonic division scheme and associated fault systems has not been well understood.Based on newly acquired seismic data from the southwestern margin of the South China Sea,this study analyzed the structural units,tectonic feature and geodynamics of the sedimentary basin.The new data suggests that the Nan0 an Basin is a rift basin oriented in the NE-SW direction,rather than a pull-apart basin induced by strike-slip faults along the western margin.The basin is a continuation of the rifts in the southwest South China Sea since the late Cretaceous.It continued rifting until the middle Miocene,even though oceanic crust occurred in the Southwest Subbasin.However,it had no transfer surface at the end of spreading,where it was characterized by a late middle Miocene unconformity(reflector T3).The Nan'an Basin can be divided into eight structural units by a series of NE-striking faults.This study provides evidences to confirm the relative importance and interplay between regional strike-slips and orthogonal displacement during basin development and deformation.The NE-SW-striking dominant rift basin indicates that the geodynamic drivers of tectonic evolution in the western margin of the South China Sea did not have a large strike-slip mechanism.Therefore,we conclude that a large strike-slip fault system did not exist in the western margin of the South China Sea.

Sedimentary Processes and Depositional Characteristics of Coarse-grained Subaqueous Fans along Steep Slopes in a Lacustrine Rift Basin:A Case Study from the Dongying Depression,Bohai Bay Basin,China

Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.

The accumulation characteristics and exploration potential of oil and gas in the back-arc basin of Japan under the background of high heat flow

The Sea of Japan is located in the southeast margin of Eurasia, in the triangle area of the western Pacific Ocean. Due to the interaction of the Pacific plate, Eurasian plate and Philippine plate, its tectonic environment is complex, forming a typical trench-arc-basin system. At present, 148 oil and gas fields have been discovered in Japan, with an oil and gas resource of 255.78×10^(6) t, showing a good prospect for oil and gas exploration. Based on the previous research and the recently collected geological and geophysical data, the characteristics of tectonic-sedimentary evolution and geothermal field in the basins around the Sea of Japan are analyzed. The results show that the tectonic evolution of the basin is mainly controlled by plate subduction and back-arc oceanic crust expansion, and it mainly undergone four tectonic-sedimentary evolution stages: Subduction period, basin development period, subsidence period and compression deformation period. The overall heat flow value of Japan Sea is high, and it is distributed annularly along Yamato Ridge. The geothermal heat flow value is about 50–130 MW/m^(2), and the average heat flow is75.9±19.8 MW/m^(2), which has a typical “hot basin ”. The high heat flow background provides unique thermal evolution conditions for hydrocarbon generation, which leads to the high temperature and rapid evolution. The authors summarized as “early hydrocarbon generation, rapid maturity and shallow and narrow hydrocarbon generation window”. The type of oil and gas is mainly natural gas, and it mainly distributed in Neogene oil and gas reservoirs. The trap types are mainly structural traps, lithologic traps and composite traps. In addition, the pre-Neogene bedrock oil and gas reservoirs also show a good exploration prospect. The resource prospecting indicates that Niigata Basin, Ulleung Basin and kitakami Basin are the main target areas for future exploration and development.

Research advances on transfer zones in rift basins and their influence on hydrocarbon accumulation

Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.

Influence of multi-stage volcanic events on the Late Cretaceous-Paleogene reservoirs and its geological significance in the northern Central Myanmar Basin

The northward subduction of the Neo-Tethys oceanic crust triggered multiple magmatic activities in the West Myanmar Arc,which in turn influenced the deposition of sedimentary pyroclastic rocks from the Cretaceous to Eocene strata in the Central Myanmar Basin(CMB).The pore structure of these lithologic reservoirs is complex and rich in tuffaceous sandstone,which plays an adverse role in reservoir development in this region.To understand the development characteristics and genetic mechanism of the pyroclastic rocks within three sets of reservoirs in this area,a comprehensive analysis was conducted through borehole core observations,thin section identification,scanning electron microscope analysis,and mercury injection tests.The tuffaceous sandstone from the upper Cretaceous to the Eocene is dominated by intermediate-acid volcanic rock debris.The pyroclastic rocks exhibit evident chloritization and ironization,with residual intergranular pores being the principal type accompanied by a smaller amount of intergranular dissolved pores and intragranular dissolved pores.The highest porosity is observed in the Eocene tuffaceous sandstone,ranging from 8%to 12%.The Late Cretaceous to Paleocene sandstones exhibit lower porosity levels of only 4%-6%.These reservoirs are characterized by their low porosity and low-permeability.Despite the presence of a good source rock in this area,the volcanic debris particles filling the pores,as well as their subsequent devitrification,chloritization,and limonite mineralization,result in pore throat blockage and narrowing.The reservoirs in this area are small in size,exhibit poor reservoir connectivity and lateral continuity,and fail to meet the necessary conditions for commercial-scale hydrocarbon accumulation and migration.

Quantitative Modelling of Multiphase Lithospheric Stretching and Deep Thermal History of Some Tertiary Rift Basins in Eastern China

The stretching process of some Tertiary rift basins in eastern China is characterized by multiphase rifting. A multiple instantaneous uniform stretching model is proposed in this paper to simulate the formation of the basins as the rifting process cannot be accurately described by a simple (one episode) stretching model. The study shows that the multiphase stretching model, combined with the back-stripping technique, can be used to reconstruct the subsidence history and the stretching process of the lithosphere, and to evaluate the depth to the top of the asthenosphere and the deep thermal evolution of the basins. The calculated results obtained by applying the quantitative model to the episodic rifting process of the Tertiary Qiongdongnan and Yinggehai basins in the South China Sea are in agreement with geophysical data and geological observations. This provides a new method for quantitative evaluation of the geodynamic process of multiphase rifting occurring during the Tertiary in eastern China.

Mechanism of diagenetic trap formation in nearshore subaqueous fans on steep rift lacustrine basin slopes—A case study from the Shahejie Formation on the north slope of the Minfeng Subsag, Bohai Basin, China

Diagenetic traps in conglomerate in nearshore subaqueous fans in the steep slope zones of rift basins have been important exploration targets for subtle reservoirs in eastern China. However, the mechanism of how those traps were formed is not clear, which inhibits further exploration for this type of reservoir. In order to solve the problem, we take as an example nearshore subaqueous fans in the upper part of the fourth member of the Shahejie Formation （Es4s） on the north slope of the Minfeng Subsag in the Dongying Sag. Combining different research methods, such as core observation, thin section examination, scanning electron microscope （SEM） observation, fluid-inclusion analysis, carbon and oxygen isotope analysis of carbonate cements, and analysis of core properties, we studied the genetic mechanisms of diagenetic traps on the basis of diagenetic environment evolution and diagenetic evolution sequence in different sub/micro-facies. Conglomerate in Es4s in the north Minfeng Subsag experienced several periods of transition between alkaline and acidic environments as ＂alkaline-acidic-alkaline-acidic-weak alkaline＂. As a result, dissolution and cementation are also very complex, and the sequence is ＂early pyrite cementation / siderite cementation / gypsum cementation / calcite and dolomite cementation- feldspar dissolution / quartz overgrowth quartz dissolution / ferroan calcite cementation / ankerite cementation / lime-mud matrix recrystallization / feldspar overgrowth carbonate dissolution / feldspar dissolution / quartz overgrowth / pyrite cementation＂. The difference in sedimentary characteristics between different sub/micro-facies of nearshore subaqueous fans controls diagenetic characteristics. Inner fan conglomerates mainly experienced compaction and lime-mud matrix recrystallization, with weak dissolution, which led to a reduction in the porosity and permeability crucial to reservoir formation. Lime-mud matrix recrystallization results in a rapid decrease in porosity and permeability in inner fan conglomerates in middle-to-deep layers. Because acid dissolution reworks reservoirs and hydrocarbon filling inhibits cementation, reservoirs far from mudstone layers in middle fan braided channels develop a great number of primary pores and secondary pores, and are good enough to be effective reservoirs of hydrocarbon. With the increase of burial depth, both the decrease of porosity and permeability of inner fan conglomerates and the increase of the physical property difference between inner fans and middle fans enhance the quality of seals in middle-to-deep layers. As a result, inner fan conglomerates can be sealing layers in middle-to-deep buried layers. Reservoirs adjacent to mudstones in middle fan braided channels and reservoirs in middle fan interdistributaries experienced extensive cementation, and tight cemented crusts formed at both the top and bottom of conglomerates, which can then act as cap rocks. In conclusion, diagenetic traps in conglomerates of nearshore subaqueous fans could be developed with inner fan conglomerates as lateral or vertical sealing layers, tight carbonate crusts near mudstone layers in middle fan braided channels as well as lacustrine mudstones as cap rocks, and conglomerates far from mudstone layers in middle fan braided channels as reservoirs. Lime-mud matrix recrystallization of inner fan conglomerates and carbonate cementation of conglomerates adjacent to mudstone layers in middle fan braided channels took place from 32 Ma B.R to 24.6 Ma B.P., thus the formation of diagenetic traps was from 32 Ma B.R to 24.6 Ma B.R and diagenetic traps have a better hydrocarbon sealing ability from 24 Ma B.P.. The sealing ability of inner fans gradually increases with the increase of burial depth and diagenetic traps buried more than 3,200 m have better seals.

Mantle heterogeneity,plume-lithosphere interaction at rift controlled ocean-continent transition zone:Evidence from trace-PGE geochemistry of Vempalle flows,Cuddapah Basin,India

This study reports major, trace, rare earth and platinum group element compositions of lava flows from the Vempalle Formation of Cuddapah Basin through an integrated petrological and geochemical approach to address mantle conditions, magma generation processes and tectonic regimes involved in their formation. Six flows have been identified on the basis of morphological features and systematic three-tier arrangement of vesicular-entablature-colonnade zones. Petrographically, the studied flows are porphyritic basalts with plagioclase and clinopyroxene representing dominant phenocrystal phases.Major and trace element characteristics reflect moderate magmatic differentiation and fractional crystallization of tholeiitic magmas. Chondrite-normalized REE patterns corroborate pronounced LREE/HREE fractionation with LREE enrichment over MREE and HREE. Primitive mantle normalized trace element abundances are marked by LILE-LREE enrichment with relative HFSE depletion collectively conforming to intraplate magmatism with contributions from sub-continental lithospheric mantle(SCLM) and extensive melt-crust interaction. PGE compositions of Vempalle lavas attest to early sulphur-saturated nature of magmas with pronounced sulphide fractionation, while PPGE enrichment over IPGE and higher Pd/Ir ratios accord to the role of a metasomatized lithospheric mantle in the genesis of the lava flows. HFSEREE-PGE systematics invoke heterogeneous mantle sources comprising depleted asthenospheric MORB type components combined with plume type melts. HFSE-REE variations account for polybaric melting at variable depths ranging from garnet to spinel lherzolite compositional domains of mantle. Intraplate tectonic setting for the Vempalle flows with P-MORB affinity is further substantiated by(i) their origin from a rising mantle plume trapping depleted asthenospheric MORB mantle during ascent,(ii) interaction between plume-derived melts and SCLM,(iii) their rift-controlled intrabasinal emplacement through Archeane Proterozoic cratonic blocks in a subduction-unrelated ocean-continent transition zone(OCTZ). The present study is significant in light of the evolution of Cuddapah basin in the global tectonic framework in terms of its association with Antarctica, plume incubation, lithospheric melting and thinning, asthenospheric infiltration collectively affecting the rifted margin of eastern Dharwar Craton and serving as precursors to supercontinent disintegration.

Intra-continental back-arc basin inversion and Late Carboniferous magmatism in Eastern Tianshan,NW China:Constraints from the Shaquanzi magmatic suite

The Yamansu belt,an important tectonic component of Eastern Tianshan Mountains,of the Central Asian Orogenic Belt,NW China hosts many Fe-(Cu)deposit.In this study,we present new zircon U-Pb geochronology and geochemical data of the volcanic rocks of Shaquanzi Formation and diorite intrusions in the Yamansu belt.The Shaquanzi Formation comprises mainly basalt,andesite/andesitic tuff,rhyolite and sub-volcanic diabase with local diorite intrusions.The volcanic rocks and diorites contain ca.315-305 Ma and ca.298 Ma zircons respectively.These rocks show calc-alkaline affinity with enrichment in large-ion lithophile elements(LILEs),light rare-earth elements(LREEs),and depletion in high field strength elements(HFSEs)in primitive mantle normalized multi-element diagrams,which resemble typical back-arc basin rocks.They show depleted mantle signature with ε_(Nd)(t)ranging from+3.1 to +5.6 for basalt;+2.1 to+4.7 for andesite;-0.2 to+1.5 for rhyolite and the ε_(Hf)(t)ranges from-0.1 to +13.0 for andesites;+5.8 to +10.7 for andesitic tuffs.We suggest that the Shaquanzi Formation basalt might have originated from a depleted,metasomatized lithospheric mantle source mixed with minor(3-5%)subduction-derived materials,whereas the andesite and rhyolite could be fractional crystallization products of the basaltic magma.The Shaquanzi Formation volcanic rocks could have formed in an intracontinental back-arc basin setting,probably via the southward subduction of the Kangguer Ocean beneath the Middle Tianshan Massif.The Yamansu mineralization belt might have undergone a continental arc to back-arc basin transition during the Late Carboniferous and the intra-continental back-arc basin might have closed in the Early Permian,marked by the emplacement of dioritic magma in the Shaquanzi belt.

Hydrocarbon Accumulation in Lacustrine Turbidite in the Rift Basin, Bohai Bay

Three types of turbidites are identified in the studied area, including proximal turbidite along the northern steep slope （alluvial fans, fan delta, and subaqueous fans via short-distance transportation）, distal turbidites along the southern gentle slope （stacked sliding of delta and fan delta front）, and fluxoturbidite in the central depression. Detailed studies of several case histories and the relationship between sedimentary facies and faults suggest a significant role of tectonic setting and faults in the development of turbidite, which created source areas, effected slope topography, controlled the climate and paleo-environment, and formed enough slope angle and slope break for sedimentary instabilities and massive block movement to form turbidite. According to statistics, 0.86%, with an average value of 40.3%, of the trap volumes in the 69 identified Tertiary lacustrine turbidites in the Jiyang Superdepression in the Bohai Bay Basin are filled with oil. The porosity and permeability of turbidite sands vary widely. The productive reservoirs are generally those from the braided channels of both distal and proximal turbidite, and from the main channel of proximal turbidite, with a low carbonate content and the porosity and permeability higher than 12% and 1 mD respectively. Most of the lithologic oil pools in the Jiyang Superdepression are enveloped by the effective source rocks, and the percentage of the trap volume generally increases with the hydrocarbon expulsion intensity of source rocks. This is in contrast with structural-lithologic traps （i.e. proximal turbidite along the steep slope and distal turbidite along the gentle slope）, in which, graben-boundary faults play an important role in oil migration, as the turbidites are not in direct contact with effective hydrocarbon source rocks.

Tectonics and Petroleum Potential of the East China Sea Shelf Rift Basin

There are two Cenozoic sedimentary basins in the East China Sea. They are the East China Sea shelf basin and the Okinawa Trough basin. The former can be divided into a western and an eastern rift region. The development of the shelf basin underwent continental-margin fault depression, post-rift and then tectonic inversion stages. Available exploration results show that the distribution of source rocks is controlled by the basin architecture and its tectonic evolution. In the Xihu depression, mudstones and coals are the main source rocks. The eastern rift region has good geological conditions for the formation of large oil and gas fields.

Carbonate Sequence Stratigraphy of a Back-Arc Basin: A Case Study of the Qom Formation in the Kashan Area, Central Iran

The Qom Formation comprises Oligo-Miocene deposits from a marine succession distributed in the Central Basin of Iran. It is composed of five members designated as A-F. Little previous work exists on the sequence stratigraphy. Based on an integrated study of sequence stratigraphy with outcrop data, wells and regional seismic profiles, the Qom Formation is interpreted as a carbonate succession deposited in a mid.Tertiary back-arc basin. There are two second-order sequences （designated as SS1 and SS2） and five third-order sequences （designated as S1-S5）. Five distinct systems tracts including transgressive, highstand, forced regressive, slope margin and Iowstand have been recognized. The relationship between the sequences and lithologic sub-units has been collated and defined （S1 to S5 individually corresponding to A-C1, C2--C4, D-E, the lower and upper portions of F）; a relative sea level change curve and the sequence stratigraphic framework have been established and described in detail. The coincidence of relative sea level change between that of the determined back-arc basin and the world indicates that the sedimentary cycles of the Qom Formation are mainly controlled by eustatic cycles. The variable combination of the systems tracts and special tectonic-depositional setting causally underpin multiple sequence stratigraphic framework styles seen in the carbonates of the back-arc basin revealing： （1） a continental margin basin that developed some form of barrier, characterized by the development of multiple cycles of carbonate-evaporites; （2） a flat carbonate ramp, which occurred on the southern shelf formed by the lack of clastic supply from nearby magmatic islands plus mixed siliciclastics and carbonates that occurred on the northern shelf due to a sufficient clastics supply from the land; and （3） a forced regressive stratigraphic stacking pattern that occured on the southern shelf and in basin lows due to the uplifting of the southern shelf. Thick and widespread aggradational framework limestone usually occurs in the initial sequences （S1 and S3） of the supersequence, which led to preferential oil reservoir deposition but a lack of source and cap rocks, whereas the retrogradational and progradational framework limestone usually occurs in the later sequences （S2 and S4-S5） of the supersequence, which results in two perfect sets of source, reservoir and cap rock assemblies, so that the limestone in sub-member C2-C4 and the F-Member can be predicted as important objects for oil exploration.

Key factors controlling shale oil enrichment in saline lacustrine rift basin:implications from two shale oil wells in Dongpu Depression,Bohai Bay Basin

Comparative analyses of petroleum generation potential,reservoir volume,frackability,and oil mobility were conducted on 102 shale cores from the Dongpu Depression.Results show the shale has high organic matter contents composed of oil-prone type I and type II kerogens within the oil window.Various types of pores and fractures exist in the shale,with a porosity of up to 14.9%.The shale has high brittle mineral contents,extensive fractures,and high potential for oil mobility due to high seepage capacity and overpressure.Although the petroleum generation potential of the shale at Well PS18-8 is relatively greater than that at Well PS18-1,oil content of the latter is greater due to the greater TOC.The porosity and fracture density observed in Well PS18-1 are greater and more conducive to shale oil enrichment.Although the shales in Wells PS18-1 and PS18-8 have similar brittle mineral contents,the former is more favorable for anthropogenic fracturing due to a higher preexisting fracture density.Besides,the shale at Well PS18-1 has a higher seepage capacity and overpressure and therefore a higher oil mobility.The fracture density and overpressure play key roles in shale oil enrichment.

Distribution Features of the Nanhua-Sinian Rifts and their Significance to Hydrocarbon Accumulation in the Tarim Basin

On the basis of reprocessing 34 new two-dimensional spliced long sections(20,191 km) in the Tarim Basin, the deep structure features of the Tarim Basin were analyzed through interpreting 30,451 km of two-dimensional seismic data and compiling basic maps. Seismic interpretation and geological analysis conclude that the Nanhua-Sinian strata are a set of rift-depression depositional systems according to their tectonic and depositional features. The rift valley formed in the Nanhua Period, and the transformation became weaker during the late Sinian Period, which eventually turned into depression. From bottom to top, the deposited strata include mafic igneous, tillite, mudstone, and dolomite. Three major depocenters developed inside this basin during the rift stage and are distributed in the eastern Tarim Basin, the Awati area, and the southwestern Tarim Basin. Among them, the rift in the eastern Tarim Basin strikes in the near east-west direction on the plane and coincides with the aeromagnetic anomaly belt. This represents a strong magnetic zone formed by upwelling basic volcanic rock along high, steep normal faults of the Nanhua Period. Controlled by the tectonic background, two types of sedimentary systems were developed in the rift stage and depression stage, showing two types of sequence features in the Sinian depositional stage. The Nanhua System appears as a wedge-shaped formation, with its bottom in unconformable contact with the base. The rifting event has a strong influence on the current tectonic units in the Tarim Basin, and affects the distribution of source rock in the Yuertus Formation and reservoir beds in the Xiaoerbulake Formation in Lower Cambrian, as well as the gypseous cap rock in Middle Cambrian. The distribution features of the rifts have important and realistic significance for determining the direction of oil and gas exploration in the deep strata of the Tarim Basin. Comprehensive analysis suggests that the Tazhong region is the most favorable zone, and the Kalpin-Bachu region is the optimal potential zone for exploring sub-salt oil and gas in deep Cambrian strata.