制浆造纸翻译工作坊平台START翻译实训模式研究与实践

制浆造纸专业英语翻译在当今全球化的经济环境中扮演着非常重要的角色,不仅是技术交流的工具,还是推动文化交流、学术研究以及国际贸易的重要力量。针对如今制浆造纸专业英语翻译教学存在的种种问题,提出基于翻译工作坊平台的START翻译实训模式。对此,对比分析了制浆造纸传统英语翻译教学与翻译工作坊教学的区别,探究了START翻译实训模式的构成与在制浆造纸专业英语翻译教学中的应用意义,并研究了基于翻译工作坊的制浆造纸专业英语START翻译实训模式的构建与实施策略,以期发挥START翻译实训的教学价值,提升制浆造纸专业英语翻译教学水平。

Biological Profile of People Living with Human Immunodeficiency Virus Starting Treatment in Kinshasa, Democratic Republic of the Congo

Context: The biochemical assessment is a real-time indicator of the state and evolution of an infection. Among other things, it makes it possible to determine the right moment when it becomes necessary to start or change a treatment. Objective: The objective of this study is to present the Biological profile of People Living with HIV starting AntiRetroViral treatment in Kinshasa in the era of Dolutegravir. Methods: The present study is a descriptive cross-sectional to determine the biological profile of People Living with HIV (PLHIV) starting AntiRetroViral Treatment (ART). The patient inclusion period was from October 4, 2021 to February 15, 2022. Sixteen centers were included. A sample of 5 ml of blood was taken in a tube with EDTA. Patients were randomly included consecutively in the centers during consultations. The population was made up of adults aged over 18, infected with HIV and starting ART. The parameters of interest retained for the present study were: sex, age, hemoglobin level, blood sugar, urea, creatinine, transaminases, total cholesterol, triglycerides, proteins total, as well as amylase. Results: 119 patients were included in this study in accordance with the inclusion criteria;67 (56.3%) are female, giving a sex ratio of 1.29 in favor of women. The average age of the patients is 39.87 ± 12.36 years. The most represented age group is that of 36 to 45 years with 37 patients (31.9%). The mean values of the biological parameters of the patients at the start of ART are as follows: 31.61 ± 20.71 IU/L for ALT/SGPT, 25.81 ± 19.96 IU/L for AST/SGOT, 79.35 ± 49.49 IU/L for Amylase, 108.13 ± 62.17 mg/dl for Total Cholesterol, 2.77 ± 1.27 mg/dl for Creatinine, 72.53 ±22.23 mg/dl for Glycaemia, 10.30 ± 2.33 g/dl for Hemoglobin, 7.91 ± 1.75 g/dl for Total Protein, 131.23 ± 68.80 mg/dl for Triglycerides, and 33.61 ± 26.27 mg/dl for Urea. Conclusion: Mean values of PLHIV are, for the most part, within the normal range. The average creatinine is higher than the normal average value while the average total cholesterol is below the limit values.

Virological and Molecular Profile of People Living with the Human Immunodeficiency Virus Starting Dolutegravir Based Antiretroviral Treatment in Kinshasa, Democratic Republic of Congo

Context: Despite the new recommendations “Test and Treat”, the virological and molecular parameters remain important information for Antiretroviral Treatment and adequate for monitoring of patients infected with HIV/AIDS. Objective: the Objective of this study is to present the virological and molecular profile of People Living with HIV starting Antiretroviral Therapy in Kinshasa in the era of the Dolutegravir. Methods: This was a transversal study to determine virological and molecular profile of People Living with HIV (PLHIV) starting an ARV Treatment. The patient’s inclusion period was from October 04, 2021 to February 15, 2022. A sample of 5 ml of blood was taken in a tube with EDTA anticoagulant for Molecular Biology analyzes (Viral Load and Sequencing) in all HIV patients, after reading and signing informed consent. The population was made up of adult patients over the age of 18, infected with HIV and starting ART. Results: 119 patients (56.3% of women) were included in this study, thus a sex-ratio of 1.29. The average age of patients included was 39.87 ± 12.36 years. The most represented age group is that of 36 to 45 with 37 patients (31.9%) followed by that from 26 to 35 years with 24 patients (20.7%). Out of 119 patients, 21 patients had an undetectable Viral Load (VL). The median value of VL was 4.16 log10 RNA copies/ml. 114 samples were successfully amplified. Subtype A was dominant with 23 cases (20.2%);followed by the subtype C and CRF02_AG each with 14.0%, and D (10.5 %). K65R (1.8%), T69P/N (4.4%), K70R (7.9%) and M184V (7.0%) mutations were listed as existing mutations for Nucleotide Transcriptase Inhibitors. Conclusion: 38 patients (31.93%) started the TARV with a positive virological prognosis. The subtype A remains dominant in Kinshasa with 23 cases (20.2%);followed by the subtype C and CRF02_AG each with 14.0%. For Inhibitors of Transcriptase Reverse Nucleotide;K65R, T69P/N, K70E/R and M184V mutations were found in patients’ naive of ARV Treatment.

《老年人潜在不适当处方筛查工具/处方遗漏筛查工具(STOPP/START)标准》第3版解读

老年人潜在不适当处方筛查工具(STOPP)/处方遗漏筛查工具(START)由2008年爱尔兰Cork大学附属医院专家组首次发表并于2015年进行第2次更新。自发表以来,该标准在发现老年人潜在不适当用药、加强对老年人滥用药物的监管、减少老年人药品不良事件等方面发挥了积极作用。2023年第3版STOPP/START标准发布,在第2版基础上增加、修订和删减了一些标准,最终形成190条潜在不适当用药标准。新标准根据最新的老年人合理用药研究结果和临床证据,提供了更新、更实用的循证医学依据。本文对STOPP/START标准(第3版)进行了详细的解读,为我国潜在不适当用药标准更新和完善提供参考,并对未来该领域的研究方向提出思考和建议。

Simulation of Start-Up Process of Turbofan Engine Based on Full-State Characteristics of Fan

Difficulties in obtaining component characteristics in the sub-idle state of rotor constrain the simulation capabilities of ground and windmill start-up processes for turbofan engines.This paper proposes a backbone feature method based on conventional characteristics parameters to derive the full-state characteristics of fan.The application of the fan’s full-state characteristics in component-level model of turbofan engine enables zero-speed iterative simulation for ground start-up process and windmill simulation for windmill start-up process,thereby improving the simulation capability of sub-idle state during turbofan engine start-up.

追求卓越的早期教育质量--OECD早期保教质量调查报告“Starting StrongⅢ”述评

早期教育质量的影响因素是多方面的,OECD成员国在提高早期教育质量方面作了许多积极探索,Starting StrongⅢ就是在广泛调研基础上形成的一份聚焦质量的报告。通过探讨Starting StrongⅢ的形成背景,进而分析其五个与早期教育质量密切相关的重要政策杠杆,能为思考我国学前教育发展提供些许启示。

Reconstruction of the starting time series of rainy season in Yunnan and the evolvement of summer monsoon during 1711-1982

According to the textual research into the historical documents dominated by archives yearly, as well as the verification with several other kinds of data, the later or earlier starting time of the rainy seasons in Yunnan during 1711-1982 has been reconstructed. The analysis indicates that there are obvious fluctuations in the starting date of the rainy seasons in Yunnan in a year or years, and long fluctuation on the decadal scale. The rainy season comes earlier in the early 18th century, later in the 19th century and earlier again in the 20th century. This reflects to a certain degree the gradual change of the summer monsoon in Yunnan. There exists an obvious quasi-3 years cycle, which is related to EI-Nino＇s quasi-3 years cycle, and a 11.3-year cycle which is notably related to the 11-year cycle of the solar activity of starting date of the rainy seasons in Yunnan. Meanwhile, the dissertation finds that the EI-Nino is very important to the starting date of the rainy seasons in Yunnan. The starting date of the rainy seasons in Yunnan often comes later or normally in the year of EI-Nino. However, there is an obvious imperfect period in such influence, which in turn may mean that there is a certain fluctuation in the effect of ENSO on Asian summer monsoon.

Starting flow in a rotating parallel plate channel

The starting flow due to a suddenly applied pressure gradient in a parallel plate channel which is rotating as a system is studied. Exact analytic series solutions to the unsteady Navier-Stokes equations are found by both the Laplace transform method and the separation of parameters method, the latter is shown to be superior. Rotation not only induces a secondary transverse flow but also alters the character of the transient flow rate and velocity profiles. Back flow and inertial oscillations occur, especially at higher rota- tion rates.

Simulation study on starting of dual clutch transmission for tracked vehicles

In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.

Starting Characteristics of Motor in Inverter-Motor Drive System

When the induction motor is fed from the PWM VSI inverter, with and without torque enhancing function, the variations of the starting torque and the starting current versus the starting frequency are analyzed, based on the steady state equivalent circuit of the induction motor.The corresponding expressions are derived, and the corresponding curves are also drawn, from which the initial starting frequency range can be determined properly and easily. The initial starting frequency range is the common range, in which the starting torque should be high enough and the starting current low enough.Some other useful formulas are also derived.These results are significant for electrical drive designers to make the starting schemes. The effects of the increase of the stator and the rotor resistances on the starting torque and the initial starting frequency range are also discussed, which is caused by the skin effects of the high order harmonics present in the PWM inverter output voltage.

Experimental study of the critical sand starting velocity of gas-watersand flow in an inclined pipe

The purpose of this paper is to study the critical sand starting velocity and transformation law of flow pattern based on gas-water-sand three-phase flow in an inclined pipe.Firstly,the indoor simulation experiment system of gas-water-sand three-phase flow was used to test the conversion law of flow pattern based upon the different gas void fraction.Secondly,the influence of slug bubbles on sand migration was investigated according to distinctive hole deviation angles,gas void fraction and sand concentration.Finally,the critical sand starting velocity was tested based on dissimilar hole deviation angles,gas void fraction,sand concentration and sand particle size,and then the influence of the abovementioned key parameters on the sand starting velocity was debated based on the force analysis of the sand particles.The experimental results illustrated that when the gas void fraction was less than 5%,it was bubbly flow.When it increased from 5%to 30%,the bubbly flow and slug flow coexisted.When it was between 30%and 50%,the slug flow and agitated flow coexisted.When it reached 50%,it was agitated flow.Providing that the hole deviation angle was 90°,the phenomenon of overall migration and wavelike migration on the surface of sand bed was observed.On the contrary,the phenomenon of rolling and jumping migration was recognized.The critical sand starting velocity was positively correlated with the hole deviation angle and sand particle size,but negatively associated with the gas void fraction and sand concentration.This research can provide a certain reference for sand-starting production in the field of petroleum engineering.

Dynamics simulation of the belt conveyor possessing feedback loop during starting

Synthesizing the mechanical models of the belt, the driver and the take-up device, the dynamics model was established on the longitudinal vibration of the overall belt conveyor system with finite elemental method, and S-function simulation block of asynchronous motor owing feedback function was built in Matlab/Simulink software, the simulation block indicates that motor rotation speed and its output moment vary with load and time, and the motor is a dynamic feedback system in working process. The state space block was adopted to express model of the belt. Thus it created simulation model of established dynamic model of overall belt conveyor system with Mat- lab/Simulink software, and simulates the course of starting by properly setting simulation parameters, and processes data for visualization.

元宇宙视域下职业教育数字化发展的逻辑理路与实施方略——基于START图谱的分析

近年来,国家不断出台支持职业教育数字化发展的政策,发挥了积极推动作用。随着元宇宙概念的迅速兴起,引发了人们对元宇宙的深度向往和探索热情。在元宇宙START图谱中,元宇宙具有社会与空间属性,科技赋能的超越延伸,人、机与人工智能共创,真实感与现实映射性,交易与流通五大特性。职业教育数字化发展是其转型升级的必然要求,对促进人的全面发展和推动职业教育资源有限性与无限性融合具有重要意义,在深化理论研究和推动职业教育实践上具有重要价值。元宇宙START图谱下职业教育数字化发展的逻辑理路是虚拟世界与现实世界基于数据共同体实现互动与协同,实现虚拟和现实世界的信度核验和资源平衡,职业教育人才培养实现算法治理。元宇宙START图谱下职业教育数字化发展应采取如下实施方略:构建全景式、空间型职业教育教学模式;创设多模态数字孪生ID;加大力度培养具备数字理念和技术的人才;构建全数字化职业教育管理模式;畅通数字资源与实物资源互动渠道,推动职业教育数字化转型升级。

The first localized back-to-back converter station started expansion

The first fully localized back-to-back DC intercon-nection project which connects Northwest and CentralChina power grids, 330-kV Lingbao Converter Stationhas now started construction for expansion.Lingbao back-to-back converter station situated inLingbao City of Henan Province is the first DC intercon-

Analysis of Starting Performance of High PowerFactor Induction Motor with Floating Windingin Parallel Connection with Capacitors

In this paper, by using a matrix technique, a dynamic model of high power factor induction motor with floating winding in parallel connection with capacitors is established. Then, the starting performance of this motor is analyzed by computer simulation. By comparison of the tested and computed results, which are in good agreement, the dynamic model and simulative method are verified.

Starting of HPS lamps driven by electronic ballast

A complete research of two different starting techniques for HPS lamps driven by electronic ballast is presented while a traditional starting technique based on the series resonant theory which is used widely for fluorescent lamps starting is analyzed in detail. An improved nth harmonic resonant technique is also simulated. Furthermore, a novel starting technique based on a pulse transformer is proposed, which still offer the automatic switch off capability. The differences between two starting techniques are explained. The experimental results from a lab prototype are used to verify the design.

THE EVOLUTION OF STARTING VORTEX AND SECONDARY SEPARATION ON AN ELLIPTIC CYLINDER

Flow visualization was used to investigate experimentally the evolution process from symmetrical shedding to staggered shedding of the starting vortex and the phenomenon of secondary separation on an elliptic cylinder at moderate Reynolds numbers.The vortex structure of the flow separation was studied.The temporal variation of separation angle and length of wake vortex were given. The photographs and experimental results provided basis for further investigation of the complicated feature of the starting process of unsteady separated flows around an elliptic cylinder.

STUDY OF THE STARTING CURRENT AND FREQUENCY DEVIATION OF ELECTROSTATIC GYROMONOTRON

From relativistic linear Vlasov-Maxwell equations,the expressions of the startingcurrent and frequency deviation of a electrostatic gyromonotron with a field distribution sin k‖zare derived and the numerical calculation is carried out.

A Novel Part-Winding Starting Method for 4-Pole Squirrel Cage Induction Motor

the paper has been removed due to the authors' personal reason.

Effects of relaxation time on start-up time for starting flow of Maxwell fluid in a pipe

Although the analytical solution of the starting flow of Maxwell fluid in a pipe has been derived for a long time, the effect of relaxation time λ on start-up time ts of this flow is still not well understood. Especially, there exist a series of jumps on the ts-λ. curve. In this paper we introduce a normalized mechanical energy by mode decomposition and mathematical analogy to describe the start-up process. An improved definition of start-up time is presented based on the normalized mechanical energy. It is proved that the ts-λ. curve contains a series of jumps if λ is larger than a critical value. The exact positions of the jumps are determined and the physical reason of the jumps is discussed.