Partially-Observed Maximum Principle for Backward Stochastic Differential Delay Equations

Dear Editor,This letter investigates a partially-observed optimal control problem for backward stochastic differential delay equations(BSDDEs).By utilizing Girsanov’s theory and convex variational method,we obtain a maximum principle on the assumption that the state equation contains time delay and the control domain is convex.The adjoint processes can be represented as the solutions of certain time-advanced stochastic differential equations in finite-dimensional spaces.Linear backward stochastic differential equation(BSDE)was first introduced by Bismut in[1],while general BSDE was given by Pardoux and Peng[2].Since then,the theory of BSDEs developed rapidly.The corresponding optimal control problems,whose states are driven by BSDEs,have also been widely studied by some authors,see[3]-[5].

A compact X-band backward traveling-wave accelerating structure

Very high-energy electrons(VHEEs)are potential candidates for FLASH radiotherapy for deep-seated tumors.We proposed a compact VHEE facility based on an X-band high-gradient high-power technique.In this study,we investigated and realized the first X-band backward traveling-wave(BTW)accelerating structure as the buncher for a VHEE facility.A method for calculating the parameters of single cell from the field distribution was introduced to simplify the design of the BTW structure.Time-domain circuit equations were applied to calculate the transient beam parameters of the buncher in the unsteady state.A prototype of the BTW structure with a thermionic cathode-diode electron gun was designed,fabricated,and tested at high power at the Tsinghua X-band high-power test stand.The structure successfully operated with 5-MW microwave pulses from the pulse compressor and outputted electron bunches with an energy of 8 MeV and a pulsed current of 108 mA.

Dielectric Resonator Magnetoelectric Dipole Arrays with Low Cross Polarization,Backward Radiation,and Mutual Coupling for MIMO Base Station Applications

Dielectric resonator magnetoelectric dipole(DRMED)arrays with enhanced isolation,reduced cross-polarization,and backward radiation are proposed for base station(BS)applications.The proposed antenna comprises an elevated dielectric resonator antenna(DRA)on a small metal plate above a sizeable common ground plane.The DRA is designed in its T Eδ11 mode,acting like a magnetic dipole.The surface current excited by the differential probes flowing on the small ground plane is equivalent to an electric dipole.Since these two equivalent dipoles are orthogonal,they have the magnetoelectric dipole characteristics with reduced backward radiation.Meanwhile,the small ground planes can be treated as decoupling structures to provide a neutralization path to cancel the original coupling path.A linearly-polarized 4-element prototype array was verified experimentally in previous work.Here,a dual-polarized DRMED antenna is presented to construct a 2-element and 4×4 array for BS applications.To investigate its MIMO performance,sophisticated multi-cell scenario simulations are carried out.By using the proposed dualpolarized DRMED array,the cellular system capacityis improved by 118.6%compared to a conventional DRA array.This significant MIMO system improvement is mainly due to the reduced backward radiation and,therefore,reduced inter-cell interferences.Measurements align well with the simulations.

Rapid hologram generation through backward ray tracing and adaptive-resolution wavefront recording plane

An advanced method for rapidly computing holograms of large three-dimensional(3D)objects combines backward ray tracing with adaptive resolution wavefront recording plane(WRP)and adaptive angular spectrum propagation.In the initial phase,a WRP with adjustable resolution and sampling interval based on the object’s size is defined to capture detailed information from large 3D objects.The second phase employs an adaptive angular spectrum method(ASM)to efficiently compute the propagation from the large-sized WRP to the small-sized computer-generated hologram(CGH).The computation process is accelerated using CUDA and OptiX.Optical experiments confirm that the algorithm can generate high-quality holograms with shadow and occlusion effects at a resolution of 1024×1024 in 29 ms.

Influences of electric-hydraulic chattering on backward extrusion process of 6061 aluminum alloy

The possibility of the electric-hydraulic chattering technology and its application in the cold extrusion were presented.The conventional and electric-hydraulic chattering assisted backward extrusion processes were performed on 6061 aluminum alloy billets at room temperature.The experimental results showed that 5.65% reduction in the extrusion load was attained if the die and ejector were vibrated at a frequency of 100 Hz and amplitude of 0.013 mm in the longitudinal direction.The friction coefficient at the billet and tool system interface determined from the finite element analysis（FEA） decreased from 0.2 without chattering to 0.1 with application of electric-hydraulic chattering.The higher values of instantaneous velocity and direction change of material flow were achieved during the chattering assisted backward extrusion process.The strain distribution of the chattering assisted backward extrusion billet revealed lower maximum strain and smoother strain distribution in comparison with that produced by the conventional extrusion method.

Improved Car-Following Model Considering Modified Backward Optimal Velocity and Velocity Difference with Backward-Looking Effect

In this paper, a new traffic flow model called the forward-backward velocity difference (FBVD) model based on the full velocity difference model is proposed to investigate the backward-looking effect by applying a modified backward optimal velocity using generalized backward maximum speed. The FBVD model belongs to the family of microscopic models that consider spatiotemporally continuous formulations. Neutral stability conditions of the discrete car-following model are derived using the linear stability theory. The stability analysis results prove that the modified backward optimal velocity has a significant positive effect in stabilizing the traffic flow. Through nonlinear analysis, a kink-antikink solution is derived from the modified Korteweg-de Vries equation of the FBVD model to explain traffic congestion of the model. The validity of this theoretical model is checked using numerical results, according to which traffic jams were found to have been significantly diminished by the introduction of the modified backward optimal velocity.

Inhomogeneity of density and mechanical properties of A357 aluminum alloy backward extruded in semi-solid state

The inhomogeneity of density and mechanical properties of A357 aluminum alloy in the semi-solid state were investigated.Numerical simulation and backward extrusion were adopted to study the preparation of cup shells.The results show that the relative density of the wall is the lowest in samples,and that of the base is the highest.With increasing the billet height,more time is needed for relative density of the corner to reach the maximum value,and the relative densities in every region improve evidently with increasing the pressure.The tensile stress was simulated to be the largest at the corner,and the hot tearings were forecasted to mainly appear at the corner too.By employing proper billet height and pressure,the extruded samples consisted of fine and uniform microstructures,and can obtain excellent mechanical properties and Brinell hardness.

Backward stochastic Volterra integral equations——a brief survey

In this paper, we present a brief survey on the updated theory of backward stochas-tic Volterra integral equations （BSVIEs, for short）. BSVIEs are a natural generalization of backward stochastic diff erential equations （BSDEs, for short）. Some interesting motivations of studying BSVIEs are recalled. With proper solution concepts, it is possible to establish the corresponding well-posedness for BSVIEs. We also survey various comparison theorems for solutions to BSVIEs.

政治小说的语言策略——以Looking Backward的四个汉译文本为中心

晚清来华传教士将政治小说传入中国,其参与实际政治问题的讨论、强烈的入世精神、变革意识,完全不同于此前抒怀式的中国文学,更是改变了文学向来是"小道"和"消遣"的命运,为文学接下来占领文化领域的制高点,做了重要的铺垫。美国人爱德华·贝拉米(Edward Bellamy)的乌托邦~①小说Looking Backward 2000-1887最早由英国传教士李提摩太(Timothy Richard)以文言译出,在晚清文化政治运动中影响广泛,此后迭经翻译,直至20世纪60年代尚有新译本。各译本选择了不同文体和语言风格,其翻译策略可以见出晚清以来书面语言的变迁、小说在社会改革中扮演的角色以及小说读者群的变化。

A GENERALIZED QUASI MINIMAL BACKWARD ERROR (GQMBACK) ALGORITHM FOR NONSYMMETRIC LINEAR SYSTEMS

Orthogonal projection methods have been widely used to solve linear systems. Little attention has been given to oblique projection methods, but the class of oblique projection methods is particularly attractive for large nonsymmetric systems. The purpose of this paper is to consider a criterion for judging whether a given appro ximation is acceptable and present an algorithm which computes an approximate solution to the linear systems Ax=b such that the normwise backward error meets some optimality condition.

二维Master均值方程Backward的形式

如果二维Backward Master平均值方程的转移概率可用参数展开,我们证明了该方程可转化成一系列闭合的线性微分方程组。利用偏微分方程的特征方程组解法,在某种条件下我们求出了均值;将所得结果与线性噪音近似的结果比较,可得扩散系数D_x、D_xy、D_y;最后证明了一般情况下线性噪音近似是不适合的。

Forward-backward热方程差分逼近的直接算法

通过利用区域分解技术和并行算法的思想 ,把原问题分解为几个完全独立的子区域上的问题 ,并直接并行求解 ,然后把这些解作适当的线性组合 ,得到原问题的解 .给出了 Forward-

GENERAL COUPLED MEAN-FIELD REFLECTED FORWARD-BACKWARD STOCHASTIC DIFFERENTIAL EQUATIONS

In this paper we consider general coupled mean-field reflected forward-backward stochastic differential equations(FBSDEs),whose coefficients not only depend on the solution but also on the law of the solution.The first part of the paper is devoted to the existence and the uniqueness of solutions for such general mean-field reflected backward stochastic differential equations(BSDEs)under Lipschitz conditions,and for the one-dimensional case a comparison theorem is studied.With the help of this comparison result,we prove the existence of the solution for our mean-field reflected forward-backward stochastic differential equation under continuity assumptions.It should be mentioned that,under appropriate assumptions,we prove the uniqueness of this solution as well as that of a comparison theorem for mean-field reflected FBSDEs in a non-trivial manner.

Effects of backward path parameters on formability in conventional spinning of aluminum hemispherical parts

During multi-pass conventional spinning, roller paths combined with the forward and the backward pass are usually used to improve the material formability. In order to understand the backward spinning process properly, the backward roller paths of hemispherical parts with aluminum alloy 2024-O are analyzed. Finite element model with parameterized conventional spinning roller paths, which are based on quadratic Bezier curves, is developed to explore the evolution of the stress, strain and thinning during the backward processes. Analysis of the simulation results reveals stress and strain features of backward pass spinning. According to the findings, the application of the backward pass can obviously improve the uniformity of wall thickness. Furthermore, references of the parameters in future backward path design are provided.

EVOLUTION OF DYNAMIC GAMES AND BACKWARD INDUCTION

As an efficient method of solving subgame-perfect Nash equilibrium,the backward induction is analyzed from an evolutionary point of view in this paper,replacing a player with a population and turning a game into a population game,which shows that equilibrium of a perfect information game is the unique evolutionarily stable outcome for dynamic models in the limit.

Forward and backward models for fault diagnosis based on parallel genetic algorithms

In this paper, a mathematical model consisting of forward and backward models is built on parallel genetic algorithms (PGAs) for fault diagnosis in a transmission power system. A new method to reduce the scale of fault sections is developed in the forward model and the message passing interface (MPI) approach is chosen to parallel the genetic algorithms by global sin-gle-population master-slave method (GPGAs). The proposed approach is applied to a sample system consisting of 28 sections, 84 protective relays and 40 circuit breakers. Simulation results show that the new model based on GPGAs can achieve very fast computation in online applications of large-scale power systems.

MULTI-DIMENSIONAL REFLECTED BACKWARD STOCHASTIC DIFFERENTIAL EQUATIONS AND THE COMPARISON THEOREM

In this article, we study the multi-dimensional reflected backward stochastic differential equations. The existence and uniqueness result of the solution for this kind of equation is proved by the fixed point argument where every element of the solution is forced to stay above the given stochastic process, i.e., multi-dimensional obstacle, respectively. We also give a kind of multi-dimensional comparison theorem for the reflected BSDE and then use it as the tool to prove an existence result for the multi-dimensional reflected BSDE where the coefficient is continuous and has linear growth.

Hot deformation in nanocrystalline Nd-Fe-B backward extruded rings

Radially oriented Nd-Fe-B rings are prepared by backward extrusion of fine grained melt-spun powder. Melt- spun powder with the nominal composition of Nd30.5Febal.Co6.0Ga0.6A10.2B0.9 （wt%） is used as starting material. The effects of process variables, such as deformation temperature （Td）, strain rate （ε） and height reduction （△h%）, on the magnetic properties of the rings are investigated. A scanning electron microscope （SEM） equipped with an energy spectrum device is used to study the metallograph and microfracture of the extruded rings. The Br and （BH）max reach the optimum values at Td =800℃,ε= 0.01 mm/s, and △h% = 70%. It is found by SEM observations that the particle boundaries, which seemingly correspond to the interfaces of the starting melt-spun powders, emerge after the corrosion of metallography specimens. This is helpful for studying the effects of powder-powder interface on the local deformation and deformation homogeneity in the rings. For different spatial positions of the extruded rings, there are characteristic metallographies and microfractures. The upper end of the rings has the least deformation and worst texture, and therefore the worst magnetic properties. The magnetic properties in the radial direction increase slightly along the axis from the bottom to the middle, then steeply decrease at the upper end of the ring. The deformation and the formation-of-texturing processes are discussed. The deformation and the texturing formation of melt-spun Nd-Fe-B alloys probably involve grain boundary sliding and grain rotation, the solution-precipitation process and preferential growth of Nd2Fel4B nanograins along the easy growth a-axis.

Effect of circumferential strain rate on dynamic recrystallization and texture of Mg-13Gd-4Y-2Zn-0.5Zr alloy during rotary backward extrusion

Gleeble-3500 thermal simulator was applied to realize the rotary backward extrusion forming of Mg-13Gd-4Y-2Zn-0.5Zr(wt%)alloy at different circumferential strain rate from 0.009 s^(-1)to 0.027 s^(-1)at 400℃and the dynamic recrystallization mechanism and texture evolution were studied.The results show that the grain size of the alloy was obviously refined after rotary backward extrusion.As the circumferenlial strain rate increased,the dynamic recrystallization fraction gradually increased causing the grain size decreased and the distribution of microstructure became more uniform.At the same time,the texture of{0001},{10-10},{11-20}was weakened and the grain orientation distribution became more random.With the increase of circumferential strain rate,the discontinuous dynamic recrystallization mechanism became dominant,which promoted the weakening of texture and grain refinement of the alloy.

The evolution of microstructure and texture of AZ80 Mg alloy cup-shaped pieces processed by rotating backward extrusion

This study proposed an effective plastic deformation technique,rotating backward extrusion(RBE),for producing high performance AZ80 magnesium alloy cup-shaped pieces.The RBE process was carried on the Gleeble-3500 test machine at 653 K,and the conventional backward extrusion(CBE)was also conducted for comparison.A detailed microstructure analysis was performed using the optical microscopy(OM)and electron back-scatter diffraction(EBSD).The results shown that the equivalent strain and deformation uniformity of the cup pieces could be substantially increased by the RBE process compared with the CBE process.Furthermore,the RBE process could significantly improve the grain refining capacity and the proportion of dynamic recrystallization(DRX),of which the maximum reduction of grain size was 88.60%,and the maximum increase of DRX proportion was 55.30%in the cup bottom.The main deformation mechanism of the RBE process was the discontinuous DRX(DDRX),while the continuous DRX(CDRX)was also occurred in the cup transition.Compared with the CBE sample,the texture of the cup bottom was weakened for the RBE sample.The microhardness value of the RBE sample was higher than that of the CBE sample,which can be attributed to the grain refinement strengthening.