Experimental Modelling of Transverse Oscillations in Aquaculture Netting Parallel to the Flow – Sounds Baffling

Numerous studies have been undertaken to improve the viability, durability and suitability of materials and methods used for aquaculture enclosures. While many of the previous studies considered macro-deformation of nets, there is a paucity of information on netting micro-deformation. When aquaculture pens are towed, industry operators have observed the motion described as ＂baffling＂ – the transverse oscillation of the net planes parallel and near parallel to the flow. The difficulty to observe and assess baffling motion in a controlled experimental environment is to sufficiently reproduce netting boundary conditions and the flow environment experienced at sea. The focus of the present study was to develop and assess experimental methods for visualisation and quantification of these transverse oscillations. Four netrig configurations with varied boundary conditions and model-netting properties were tested in a flume tank. While the Reynolds number was not equivalent to full-scale, usage of the pliable and fine mesh model netting that enabled baffling to develop at low flow velocities was deemed to be of a larger relevance to this initial study. Baffling was observed in the testing frame that constrained the net sheet on the leading edge, similarly to a flag attachment onto a pole. Baffling motion increased the hydrodynamic drag of the net by 35%–58% when compared to the previously developed formula for taut net sheets aligned parallel to the flow. Furthermore, it was found that the drag due to baffling decreased with the increasing velocity over the studied Reynolds numbers（below 200）; and the drag coefficient was non-linear for Reynolds numbers below 120. It is hypothesised that baffling motion is initially propagated by vortex shedding of the netting twine which causes the netting to oscillate; there after the restoring force causes unstable pressure differences on each side of the netting which excites the amplitude of the netting oscillations.

Baffling Science

A mysterious disease with AIDS-like symptoms has medical experts scrambling for possibilities

Protective effects of baffles with different positions,row spacings,heights on debris flow impact

The baffle effectively slowed down debris flow velocity,reduced its kinetic energy,and significantly shortened the distance of debris flow movement.Consequently,they are widely used for protection against natural hazards such as landslides and mudslides.This study,based on the threedimensional DEM(Discrete Element Method),investigated the impact of different baffle positions on debris flow protection.Debris flow velocity and kinetic energy variations were studied through single-factor experiments.Suitable baffle positions were preliminarily selected by analyzing the influence of the first-row baffle position on the impact force and accumulation mass of debris flow.Subsequently,based on the selected baffle positions and four factors influencing the effectiveness of baffle protection(baffle position(P),baffle height(h),row spacing(S_(r)),and angle of transit area(α)),an orthogonal design was employed to further explore the optimal arrangement of baffles.The research results indicate that the use of a baffle structure could effectively slow down the motion velocity of debris flows and dissipate their energy.When the baffle is placed in the transit area,the impact force on the first-row baffle is greater than that when the baffle is placed in the deposition area.Similarly,when the baffle is placed in the transit area,the obstruction effect on debris flow mass is also greater than that when the baffle is placed in the deposition area.Through orthogonal experimental range analysis,when the impact on the first row of baffles is used as the evaluation criterion,the importance of each influencing factor is ranked asα>P>S_(r)>h.When the mass of debris flow behind the baffle is regarded as the evaluation criterion,the rank is changed to P>α>S_(r)>h.The experimental simulation results show that the optimal baffle arrangement is:P_(5),S_(r)=16,α=35°,h=9.

A strategy for strengthening chaotic mixing of dual shaft eccentric mixers by changing non-Newtonian fluids kinetic energy distribution

Efficiently modulating the velocity distribution and flow pattern of non-Newtonian fluids is a critical challenge in the context of dual shaft eccentric mixers for process intensification,posing a significant barrier for the existing technologies.Accordingly,this work reports a convenient strategy that changes the kinetic energy to controllably regulate the flow patterns from radial flow to axial flow.Results showed that the desired velocity distribution and flow patterns could be effectively obtained by varying the number and structure of baffles to change kinetic energy,and a more uniform velocity distribution,which could not be reached normally in standard baffle dual shaft mixers,was easily obtained.Furthermore,a comparative analysis of velocity and shear rate distributions is employed to elucidate the mechanism behind the generation of flow patterns in various dual-shaft eccentric mixers.Importantly,there is little difference in the power number of the laminar flow at the same Reynolds number,meaning that the baffle type has no effect on the power consumption,while the power number of both unbaffle and U-shaped baffle mixing systems decreases compared with the standard baffle mixing system in the transition flow.Finally,at the same rotational condition,the dimensionless mixing time of the U-shaped baffle mixing system is 15.3%and 7.9%shorter than that of the standard baffle and the unbaffle mixing system,respectively,which shows the advantage of the U-shaped baffle in stirring rate.

Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells

This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstream(Case 3),downstream(Case 4),and the entire cathode flow channel(Case 5)to study the effects of baffle position on mass transport,power density,net power,etc.Moreover,the effects of back pressure and humidity on the voltage were investigated.Results showed that compared to smooth channels,the oxygen and water transport facilitation at the diffusion layer-channel interface were added 11.53%-20.60%and 7.81%-9.80%at 1.68 A·cm^(-2)by adding baffles.The closer the baffles were to upstream,the higher the total oxygen flux,but the lower the flux uniformity the worse the water removal.The oxygen flux of upstream baffles was 8.14%higher than that of downstream baffles,but oxygen flux uniformity decreased by 18.96%at 1.68 A·cm^(-2).The order of water removal and voltage improvement was Case 4>Case 5>Case 3>Case 2>Case 1.Net power of Case 4 was 9.87%higher than that of the smooth channel.To the Case 4,when the cell worked under low back pressure or high humidity,the voltage increments were higher.The potential increment for the back pressure of 0 atm was 0.9%higher than that of 2 atm(1 atm=101.325 kPa).The potential increment for the humidity of 100%was 7.89%higher than that of 50%.

Numerical modeling techniques for noise emission of free railway wheels

In this article,we consider the numerical prediction of the noise emission from a wheelset in laboratory conditions.We focus on the fluid-structure interaction leading to sound emission in the fluid domain by analyzing three different methods to account for acoustic sources.These are a discretized baffled piston using the discrete calculation method(DCM),a closed cylindrical volume using the boundary element method(BEM)and radiating elastic disks in a cubic enclosure solved with the finite element method(FEM).We provide the validation of the baffled piston and the BEM using measurements of the noise emission of a railway wheel by considering ground reflections in the numerical models.Selected space-resolved waveforms are compared with experimental results as well as with a fluid-structure interaction finite element model.The computational advantage of a discretized disk mounted on a baffle and BEM compared to FEM is highlighted,and the baffled pistons limitations caused by a lack of edge radiation effects are investigated.

Dynamic Response of A Group of Cylindrical Storage Tanks with Baffles Considering the Effect of Soil Foundation

The sloshing in a group of rigid cylindrical tanks with baffles and on soil foundation under horizontal excitation is studied analytically.The solutions for the velocity potential are derived out by the liquid subdomain method.Equivalent models with mass-spring oscillators are established to replace continuous fluid.Combined with the least square technique,Chebyshev polynomials are employed to fit horizontal,rocking and horizontal-rocking coupling impedances of soil,respectively.A lumped parameter model for impedance is presented to describe the effects of soil on tank structures.A mechanical model for the soil-foundation-tank-liquid-baffle system with small amount of calculation and high accuracy is proposed using the substructure technique.The analytical solutions are in comparison with data from reported literature and numerical codes to validate the effectiveness and correctness of the model.Detailed dynamic properties and seismic responses of the soil-tank system are given for the baffle number,size and location as well as soil parameter.

Separate-layer balanced waterflooding development technology for thick and complex carbonate reservoirs in the Middle East

Based on the waterflooding development in carbonate reservoirs in the Middle East,in order to solve the problem of the poor development effects caused by commingled injection and production,taking the thick bioclastic limestone reservoirs of Cretaceous in Iran-Iraq as an example,this paper proposes a balanced waterflooding development technology for thick and complex carbonate reservoirs.This technology includes the fine division of development units by concealed baffles and barriers,the combination of multi well type and multi well pattern,and the construction of balanced water injection and recovery system.Thick carbonate reservoirs in Iran-Iraq are characterized by extremely vertical heterogeneity,development of multi-genesis ultra-high permeability zones,and highly concealed baffles and barriers.Based on the technologies of identification,characterization,and sealing evaluation for concealed baffles and barriers,the balanced waterflooding development technology is proposed,and three types of balanced waterflooding development modes/techniques are formed,namely,conventional stratigraphic framework,fine stratigraphic framework,and deepened stratigraphic framework.Numerical simulations show that this technology is able to realize a fine and efficient waterflooding development to recover,in a balanced manner,the reserves of thick and complex carbonate reservoirs in Iran and Iraq.The proposed technology provides a reference for the development optimization of similar reservoirs.

The Effects of Fluid Sloshing on Different Baffle Configurations in Storage Tanks Transported on Trucks during an Emergency Braking

Different Baffle designs usable in cylindrical and elliptical storage tanks carried by trucks often used for transporting inflammable liquid materials in Cameroon are investigated to evaluate their safest fluid sloshing damping response during emergency braking where the magnitude of sloshing waves are the greatest. The uncontrolled fluid sloshing creates thrust on the walls of the tanks usually felt externally on the truck carrying the tank and capable of hindering driver’s effort to maintain steer ability and improve on safety during critical braking moments. The study first passes through COMSOL, to expose the safest margin of each Baffle type at instantaneous fluid pressure wave propagation initiated at a single phase to reflect sloshing in the storage tank during an emergency braking by the truck carrying the tank. The vivid results can be seen in the domain of Acoustic Iso-surface Pressure response;but also acoustic Pressure and Sound pressure response are seen automatically. Secondly, through an experimental finding in which fluid is forced to pass through each Baffle and the resistance to fluid flow is a measured as it’s the Baffle’s damping ability. Either, the fluid is lost through the Baffle and by determination of the surface load exerted on each Baffle due to the reaction of the residual fluid acting on the surface of each Baffle after some of it is Lost, the individual sloshing damping abilities are exposed. By comparing the Experimental outcome with the computational response obtained, an ideal Baffle design is proposed for cylindrical and elliptical tanks and considered to respond to abrupt braking more effciently. The application of the Baffle designs with an average multiple holes rather than the usual face centered proved to be more effcient in fluid sloshing as they provide a more uniformly distributed damping pressure during fluid sloshing in the tank thereby reducing the magnitude of forward thrust that can be created by the conventional Baffle type during emergency braking hence contributing to improving safety. Mindful of the human, material and environmental damages that an accident involving mobile petroleum storage tanks can course, this study is therefore of great significance for design optimization by petroleum storage tank manufacturing companies in Cameroon.

Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles

Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baffled stirred tank and punched baffled stirred tank(Pun-BST) were studied by using the computational fluid dynamic analysis. Results showed that perforating holes in the baffles could reduce power consumption of mixing. Meanwhile, the punched baffle system could maintain the solids in suspension as traditional baffle system. The results also showed that the baffles could increase the “effective flow” of stirred tank even though the whole velocity of the vessel is lower than un-baffled vessel. In addition, both the solid-liquid suspension and “effective flow” were related to instability of the flow field.Perfect solid-liquid suspension results always along with obvious instability of the flow field. But, the strengthening effect of punched baffle on flow field instability mainly happened in the near-wall area.It's because the collision and aggregation among sub-streams induced by holes intensified the unstable fluid flow. On the whole, the Pun-BST system provided much better mixing characteristics and recommended to apply in the industrial process.

Greenhouse gas reduction of co-benefit-type wastewater treatment system for fish-processing industry: A real-scale case study in Indonesia

This study examined the application of co-benefit-type wastewater treatment technology in the fish-processing industry. Given that there was a dearth of information on fish-processing industrial wastewater in Indonesia, site surveys were conducted. For the entire fish-processing industry throughout the country, the dissemination rate of wastewater treatment facilities was less than 50%. Using a co-benefit approach, a real-scale swim-bed technology (SBT) and a system combining an anaerobic baffled reactor (ABR) with SBT (ABR–SBT) were installed in a fishmeal processing factory in Bali, Indonesia, and the wastewater system process performance was evaluated. In a business-as-usual scenario, the estimated chemical oxygen demand load and greenhouse gas (GHG) emissions from wastewater from the Indonesian fish-processing industry were 33 000 tons per year and 220 000 tons of equivalent CO_(2) per year, respectively. On the other hand, the GHG emissions in the co-benefit scenarios of the SBT system and ABR–SBT system were 98 149 and 26 720 tons per year, respectively. Therefore, introducing co-benefit-type wastewater treatment to Indonesia’s fish-processing industry would significantly reduce pollution loads and GHG emissions.

Micro T-Mixer with Baffles: Effect of Baffle Height and Setting Angle on Mixing

Chaotic mixing in eight different types of micro T-mixer flow has been studied experimentally and numerically. The present experimental study was performed to visualize two-liquid flows in a micro T-mixer with baffles. The Reynolds number, baffle height and setting angle were varied to investigate their effect on the mixing performance. Three micro T-mixer models were produced, which are several centimeters long and have a rectangular cross-section of few millimeters a side. The mixing of two-liquid was measured using the laser induced fluorescence (LIF) technique. Moreover, three-dimensional numerical simulations were conducted with the open-source CFD solver, OpenFOAM, for the same configuration as used in the experiments to investigate the detailed mechanism of the chaotic mixing. As a result, it was found that the mixing of two-liquid is greatly improved in the micro T-mixer with baffle. The baffle height and setting angle show a significant influence on the mixing performance.

The Effect of Baffled Surface Flow Wetlands on Water Purification

[Objective] The effect of baffled surface flow wetlands on water purification was studied in order to provide a reference for the ecological restoration of polluted river.[Method] Contents of some indexes like DO,TN,TP,NH＋4-N,CODCr,SS,SD,etc.were determined in the band baffled surface flow wetlands with total area of 7 400 m2 at JiaLu riverside.[Result] Baffled surface flow wetlands could improve the effluent quality significantly,could enhance transparency and dissolved oxygen content and also could decrease SS content.The removal rate of TN was kept at more than 73% in summer and decreased to 23% in early winter;The removal rate of TP was little influenced by temperature,and it was kept at more than 77% in summer and still kept at more than 69% in autumn and winter;The removal rate of NH＋4-N was kept at more than 83% in summer and decreased slightly in autumn and winter,but still kept at more than 75%;The removal rate of CODCr ranged from 14% to 50%.[Conclusion] Baffled surface flow wetlands could effectively improve the purification effect of surface flow wetlands,which is a feasible way for ecological restoration.

混合折流板厌氧反应器(HABR)处理高浓度糖浆废水

本文对混合折流板厌氧反应器(HABR)处理高浓度糖浆废水进行了研究。反应器在有机负荷率为20kg/m^3·d时,能有效地去除总的和溶解性COD70％以上。试验过程中观察到生物体的颗粒化及颗粒的增大,并观察到颗粒污泥中有类似于甲烷丝菌属(Methanthrix)和甲烷八叠球菌属(MethanosaiCina)的优势甲烷菌。实验过程中根据需要添加氮和磷,反应器内的污泥截留性能很佳,产气量为每天产5倍于反应器容积的气体。

Characteristics of Fin Baffle Packing Used in Rotating Packed Bed

For an alcohol/water system and with fin baffle packing,continuous distillation experiments were carried out in a rotating packed bed(RPB)system at atmospheric pressure.The effects of the average high gravity factor(β),liquid reflux ratio(R)and feedstock flux(F)on the momentum transfer and mass transfer were investigated. The gas phase pressure drop of RPB increased with the average high gravity factor,liquid reflux ratio and feedstock flux,which was 13.55-64.37 Pa atβof 2.01-51.49,R of 1.0-2.5,and F of 8-24 L·h1for a theoretical tray in the RPB with fin baffle packing.The investigation on the mass transfer in the RPB with different packings showed that the number of transfer units of RPB with a packing also increased with the average high gravity factor,reflux ratio and feedstock flux.It is found that the fin baffle packing(packing III)presents the best mass transfer performance and lowest pressure drop for the height equivalent to a theoretical plate(HETP),which is 6.59-9.84 mm.

Investigation of the Effects of Baffles on the Shallow Water Sloshing in A Rectangular Tank Using A 2D Turbulent ISPH Method

Liquid sloshing is a common phenomenon in the liquid tanks transportation. Liquid waves lead to fluctuating forces on the tank wall. Uncontrolled fluctuations lead to large forces and momentums. Baffles can control these fluctuations. A numerical method, which has been widely used to model this phenomenon, is Smoothed Particle Hydrodynamics(SPH). The Lagrangian nature of this method makes it suitable for simulating free surface flows. In the present study, an accurate Incompressible Smoothed Particle Hydrodynamics(ISPH) method is developed and improved using the kernel gradient correction tensors, particle shifting algorithms, k–ε turbulence model, and free surface particle detectors. Comparisons with the experimental data approve the ability of the present algorithm for simulating shallow water sloshing. The main aim of this study is to investigate the effects of the vertical baffle on the damping of liquid sloshing. Results show that baffles number has a major role in sloshing fluctuation damping.

Optimization of flow control devices for a T-type five-strand billet caster tundish: water modeling and numerical simulation

The optimization of flow control devices(FCDs) for a T-type five-strand billet caster tundish was carried out by water modeling and numerical simulation. In water modeling experiments, flow characteristics of the bare tundish and tundish conf igurations with designed U-type baff les and a round turbulence inhibitor were analyzed using residence time distribution(RTD) curves. Mathematical models for liquid steel in the real plant tundish were established using the fluid dynamics software package Fluent. The flow field, the temperature field, and the RTD curves of liquid steel in the proposed tundish conf igurations were obtained. The results of numerical simulation and water modeling were validated with each other by the predicted and experimental RTD curves. The results of flow field and temperature field were used to ref lect the actual state of a real plant tundish and to choose the optimal FCD. Finaly, from the whole performance of the multi-strand tundish, the optimal scheme was determined by combining the results of water modeling and numerical simulation. With the optimal tundish equipped with U-type baffle with def lector holes and round turbulence inhibitor, not only was the flow characteristic of each strand improved, but also the difference of flow characteristics between multiple strands was smaller.

Effects of operational factors on soluble microbial products in a carrier anaerobic baffled reactor treating dilute wastewater

The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.

Drawdown mechanism of light particles in baffled stirred tank for the KR desulphurization process

To improve the efficiency of the desulfurization process, the drawdown mechanism of light particles in stirred tank is studied in this paper. For both up and down pumping modes, the just drawdown speeds(Njd) of floating particles in transformative Kanbara Reactor(KR) are measured in one and four baffled stirred tanks experimentally. Then numerical simulations with standard k-ε model coupled with volume of fluid model(VOF) and discrete phase model(DPM) are conducted to analyze the flow field at the just drawdown speed Njd. The torques on the impeller obtained from experiments and simulations agree well with each other, which indicates the validity of our numerical simulations. Based on the simulations, three main drawdown mechanisms for floating particles, the axial circulation, turbulent fluctuation and largescale eddies, are analyzed. It's found that the axial circulation dominates the drawdown process at small submergence(S = 1/4 T and 1/3 T) and the large-scale eddies play a major role at large submergence(S = 2/3 T and 3/4 T). Besides, the turbulent fluctuation affects the drawdown process significantly for up pumping mode at small submergence(S = 1/4 T and 1/3 T) and for down pumping mode at large submergence(S = 2/3 T and 3/4 T). This paper helps to provide a more comprehensive understanding of the KR desulphurizer drawdown process in the baffled stirred tank.

Performance comparison of heat exchangers using sextant/trisection helical baffles and segmental ones

The shell side flow fields of both sextant and trisection helical baffle heat exchangers are presented on meridian and multilayer hexagon slices.It verifies that the performance of sextant schemes is better than those of the other kinds of helical baffle heat exchangers.The main mechanisms are due to the restricted leakage flow in the minimized gaps with increased baffle number and by one row of tubes dampen the leakage flow in the circumferential overlapped area of the adjacent helical baffles.The performance features were simulated on two different angled sextant helical heat exchangers and each compared with two trisection ones of either identical helical pitch or identical incline angle.The results verified that the performances of helical heat exchangers are mainly determined by the helical pitch rather than the baffle incline angle.The average values of comprehensive index hoΔpo-1/3 of the trisection helical schemes T-24.1°and T-29.7°are correspondingly 3.47%and 3.34%lower than those of the sextant ones X-20°and X-25°with identical helical pitches.The comparison results show that the average values of shell side h.t.c.hoand comprehensive index hoΔpo-1/3 of the optimal dual helix sextant scheme DX30°are respectively 7.22%and 23.56%higher than those of the segment scheme S100.