Settlement patterns of mountainous half-filled and half-cut widened subgrade with retaining wall

The settlement of widened highway subgrade in mountainous area is not only affected by the interaction between new and existing subgrade, but also seriously restricted by the external retaining wall. Based on the practical engineering of half-filled and half-cut widened mountainous highway subgrade with external balance weight retaining wall(BWRW), a sophisticated finite element numerical model is established. The evolution law of subgrade settlement is revealed during the whole process of new subgrade filling and BWRW inclination after construction. The settlement component of subgrade is clarified considering whether the existing pavement continues to be used. The results show that the additional settlement caused by the BWRW inclination after construction cannot be ignored in the widening and reconstruction of mountainous highway subgrade. In addition, pursuant to the comprehensive design of subgrade and pavement, the component of subgrade settlement should be determined according to whether the existing pavement continues to be used, while considering the influence of BWRW inclination after construction. When the existing pavement continues to be used, the settlement of the existing subgrade is caused by the new subgrade filling and the BWRW inclination after construction. On the contrary, the settlement is only caused by the BWRW inclination after construction.

Study of 3-D Numerical Simulation for Gas Transfer in the Goaf of the Coal Mining

In order to simulate field distribution rules,mathematical models for 3-D air flows and gas transfer in the goaf of the coal mining are established,based on theories of permeability and dynamic dispersion through porous media. A gas dispersion equation in a 3-D field is calculated by use of numerical method on a weighted upstream multi-element balance. Based on data of an example with a U type ventilation mode,surface charts of air pressure distribution and gas concentration are drawn by Graphtool software. Finally,a comparison between actually measured results in the model test and the numerical simulation results is made to proves the numerical implementation feasible.

Balancing method without trial weights for rotor systems based on similitude scale model

A balancing method without trial weights based on the dynamic similitude scale model was proposed as a solution to the balancing problem of a large-scale rotor system. This method could be used to directly obtain the required coefficients for the balancing problem of the prototype system through a similarity model test without a prototype test. Thus, the weight test process of the prototype system was effectively eliminated in the proposed balancing method. First, with the rotor system as the research object, the analytical expression of the influence coefficient was derived on the basis of rotor dynamics theory. Then, through calculation and dimen- sional analysis methods, the similitude relationships of the rotor system and the influence coefficient were deduced on the basis of dynamic similitude theory. The correctness of the proposed similitude relationships was verified through numerical simulation and experiment. The balancing method without trial weights was proposed based on the similitude relationship of the influence coefficient. The effect of the balancing method without trial weights was compared with that of the traditional influence coefficient method through numerical simulation, and the results verified the correctness and effectiveness of the proposed balancing method. The results of this study provide theoretical supplements for the balancing method and the similitude design of the rotor system.

Comparison of Covariate Balance Weighting Methods in Estimating Treatment Effects

Different covariate balance weighting methods have been proposed by researchers from different perspectives to estimate the treatment effects.This paper gives a brief review of the covariate balancing propensity score method by Imai and Ratkovic(2014),the stable balance weighting procedure by Zubizarreta(2015),the calibration balance weighting approach by Chan,et al.(2016),and the integrated propensity score technique by Sant’Anna,et al.(2020).Simulations are conducted to illustrate the finite sample performance of both the average treatment effect and quantile treatment effect estimators based on different weighting methods.Simulation results show that in general,the covariate balance weighting methods can outperform the conventional maximum likelihood estimation method while the performance of the four covariate balance weighting methods varies with the data generating processes.Finally,the four covariate balance weighting methods are applied to estimate the treatment effects of the college graduate on personal annual income.

Judicious partitions of weighted hypergraphs

Let G be a weighted hypergraph with edges of size i for i = 1, 2. Let wi denote the total weight of edges of size i and α be the maximum weight of an edge of size 1. We study the following partitioning problem of Bollob′as and Scott： Does there exist a bipartition such that each class meets edges of total weight at least （w_1-α）/2＋（2w_2）/3？ We provide an optimal bound for balanced bipartition of weighted hypergraphs, partially establishing this conjecture. For dense graphs, we also give a result for partitions into more than two classes.In particular, it is shown that any graph G with m edges has a partition V_1,..., V_k such that each vertex set meets at least（1-（1-1/k）~2）m ＋ o（m） edges, which answers a related question of Bollobás and Scott.