Axial compressive behavior of Moso Bamboo and its components with respect to fiber-reinforced composite structure

Bamboo is a unique fiber-reinforced bio-composite with fibers embedded into a parenchyma cell matrix.We conducted axial compression tests on bamboo blocks prepared from bottom to top,and from inner to outer portions of the culm.The apparent Young’s modulus and compressive strength of whole thickness bamboo blocks exhibited slight increases with increasing height along the culm,due to slight increases of fiber volume fraction(Vf)from 28.4 to 30.4%.Other blocks showed a significant increase in apparent Young’s modulus and strength from the inner to outer part of the culm wall,mainly owing to a sharp increase of Vf from 17.1 to 59.8%.With a decrease of fiber fraction volume there was a transition from relatively brittle behavior to very ductile behavior in bamboo blocks.Results indicated that stiffness and strength of bamboo was primarily due to fiber in compression,and ductility of bamboo was provided by the parenchyma cell matrix acting as a natural fiber-reinforced composite.

Visualizing Complex Anatomical Structure in Bamboo Nodes Based on X-ray Microtomography

In recent years,bamboo has been widely used in a broad range of applications,a thorough understanding of the structural characteristics of bamboo nodes is essential for better processing and manufacturing of biomimetic materials.This study investigated the complex anatomical structure for the nodes of two bamboo species,Indocalamus latifolius(Keng)McClure and Shibataea chinensis Nakai,using a high-resolution X-ray microtomography(μCT).The results show that the vascular bundle system in the nodal region of I.latifolius and S.chinensis is a net-like structure composed of horizontal and axial vascular bundles.Furthermore,the fiber sheath surrounding metaxylem vessels tended to be shorter in the tangential direction.This structure of bamboo nodes facilitates the tangential and axial transport of moisture and nutrients.The anatomical structure of I.latifolius and S.chinensis nodes has obvious differences,especially in the arrangement of vascular bundles.Vascular bundle frequency was significantly higher in S.chinensis nodes than in I.latifolius nodes.These findings indicate thatμCT is a nondestructive three-dimensional imaging method that can used to examine the anatomical structure of bamboo nodes.

Experimental and theoretical study on thermal and moisture characteristics of new-type bamboo structure wall

Thermal and moisture characteristics of the bamboo structure wall were tested in natural climate and three representative variation processes of heat and moisture： heating from solar radiation in summer at normal temperature and humidity, heating from solar radiation in summer at normal temperature and high humidity after rain, humidifying from brash in summer at high temperature and normal humidity. The results show that, in summer, the largest temperature difference between external and internal surface of the 28 mm-thick bamboo plywood wall is 11.73℃ （at 15：40） and the largest strain difference is 136 μm/m （at 18：50）, both in ambient and indoor conditioned environment. In heating process, lengthways of the wall surface are in contracting strain while transverse ways are in expanding strain at initial stage and in contracting strain during later period. When the high temperature wall is humidified by rain, the surface temperature drops, moisture content increases and the expanding strain is presented on the surface during the whole process. Temperature and moisture content are two important factors which affect thermal and moisture stress （TMS） of the bamboo structure wall. The TMS is not only related to temperature and moisture content, but also greatly affected by temperature gradient, moisture content gradient and rates of changing.

Effects of Bamboo Charcoal-based Biochar on Soil Enzyme Activity and Microbial Community Structure

[Objectives]This study was conducted to reveal the effects of bamboo charcoal-based biochar(or bamboo charcoal for short)on soil enzyme activity and microbial community structure.[Methods]The field experiment was carried out at the Modern Agriculture Demonstration Base of Gaoping Village,Gaoping Town,Suichang County,Zhejiang Province.Bamboo charcoal was applied at four different levels:T_(0)(no bamboo charcoal),T_(1)(1125 kg/hm^(2)bamboo charcoal),T_(2)(2250 kg/hm^(2)bamboo charcoal)and T_(3)(3375 kg/hm^(2)bamboo charcoal).Soil physicochemical properties and enzyme activities in different treatments were measured.[Results]The soil fungal,bacterial and actinomycete populations increased significantly in the soils surrounding capsicum roots.The bacterial population,fungal population and fungus/bacterium ratio peaked in Treatment T_(2),up to 7.32×10^(6)cfu/g,2.65×10^(4)cfu/g and 0.36×10^(-2),respectively.The effect of bamboo charcoal in promotingβ-glucoside,catalase,acid phosphatase and sucrase activities was T_(2)>T_(3)>T_(1)>T_(0).With bamboo charcoal increasing,the bacterium population,fungus population,fungus/bacterium ratio,β-glucoside,catalase,acid phosphatase and sucrase activities all increased at first and then decreased.T_(2)treatment showed the best effects in improving soil physicochemical properties and microbial community structure.[Conclusions]Bamboo charcoal significantly improves soil enzyme activity and increases soil microbial population,and thus has important positive effects on the soil ecosystem.

Prediction of Protein OmpH in Structure of C47-8 Pasteurella multocida

[Objective] This study aimed to predict the structure of protein OmpH from Pasteurella multocida C47-8 （PmC47-8） strain of yak. [Method] Online BLAST, signal peptide prediction, secondary structure prediction and protein characteristics of sequencing result of gene OmpH from PmC47-8 strain were analyzed. [Result] The similarities of gene OmpH from PmC47-8 with the published 81 OmpH genes were between 84% and 99%; a signal peptide was found with the cleavage sites between 20 and 21 in the polypeptide; secondary structure prediction showed that folding structure accounted for 49.8% and loop structure for 50.2%; it predicted that there were 7 O-glycosylation sites in OmpH protein with the amino acid residual sites of 2, 45, 48, 330, 716, 721, 723, respectively, and 2 N-glycosylation sites with the amino acid residual sites of 15 and 35. [Conclusion] This study lays the foundation for the study on the immunity of OmpH gene from yak.

Review on Connections for Original Bamboo Structures

Bamboo is a green construction material in line with sustainable development strategies.The use of raw bamboo in architecture has existed since ancient times.In the long development years of original bamboo buildings,many areas in the world gradually formed unique bamboo buildings,which have become an important local cultural feature.For building structures,joints are the key to ensure structural load transfer.Because of hollow and thin-walled material property of bamboo,the connection in raw bamboo buildings has always been a major difficulty and problem in the application of bamboo,which seriously hinders the development of original bamboo structures.In order to promote the use of raw bamboo,two traditional connection methods in raw bamboo structures are described in this paper firstly,with the advantages and disadvantages of the two methods pointed out.Also,research progress on four categories of raw bamboo building joints is described namely,bolt joints,steel member joints,filler reinforced joints and other types of joints.This work can provide a reference for future research and engineering applications.

Dietary bamboo leaf flavonoids improve quality and microstructure of broiler meat by changing untargeted metabolome

Background Dietary bamboo leaf flavonoids(BLFs)are rarely used in poultry production,and it is unknown whether they influence meat texture profile,perceived color,or microstructure.Results A total of 720 one-day-old Arbor Acres broilers were supplemented with a basal diet with 20 mg bacitracin/kg,50 mg BLFs/kg,or 250 mg BLFs/kg or without additions.Data showed that the dietary BLFs significantly(P<0.05)changed growth performance and the texture profile.In particular,BLFs increased birds’average daily gain and average daily feed intake,decreased the feed:gain ratio and mortality rate,improved elasticity of breast meat,enhanced the gumminess of breast and leg meat,and decreased the hardness of breast meat.Moreover,a significant(P<0.05)increase in redness(a*)and chroma(c*)of breast meat and c*and water-holding capacity of leg meat was found in BLF-supplemented broilers compared with control broilers.In addition,BLFs supplementation significantly decreased(P<0.05)theβ-sheet ratio and serum malondialdehyde and increased theβ-turn ratio of protein secondary structure,superoxide dismutase,and glutathione peroxidase of breast meat and total antioxidant capacity and catalase of serum.Based on the analysis of untargeted metabolome,BLFs treatment considerably altered 14 metabolites of the breast meat,including flavonoids,amino acids,and organic acids,as well as phenolic and aromatic compounds.Conclusions Dietary BLFs supplementation could play a beneficial role in improving meat quality and sensory color in the poultry industry by changing protein secondary structures and modulating metabolites.

Periodic oscillation and fine structure of wedge-induced oblique detonation waves

An oblique detonation wave for a Mach 7 inlet flow over a long enough wedge of 30 turning angle is simulated numerically using Euler equation and one-step rection model.The fifth-order WENO scheme is adopted to capture the shock wave.The numerical results show that with the compression of the wedge wall the detonation wave front structure is divided into three sections：the ZND model-like strcuture,single-sided triple point structure and dual-headed triple point strucuture.The first structure is the smooth straight,and the second has the characteristic of the triple points propagating dowanstream only with the same velocity,while the dual-headed triple point structure is very complicated.The detonation waves facing upstream and downstream propagate with different velocities,in which the periodic collisions of the triple points cause the oscillation of the detonation wave front.This oscillation process has temporal and spatial periodicity.In addition,the triple point trace are recorded to obtain different cell structures in three sections.

Preparation,Structures and Mechanical Properties of Bamboo Shoot Shell Nanofiber/Konjac Glucomannan Aerogels

With bamboo shoot shell nanofibers（BSN） and konjac glucomannan（KGM） as precursor materials, the BSN/KGM aerogels were prepared in different proportions by sol-gel method. The surface morphology, microstructure, characteristic functional groups and thermal properties of BSN/KGM aerogels were characterized by scanning electron microscopy（SEM）, infrared spectroscopy（IR）, X-ray diffraction（XRD） and thermogravimetric analysis（TGA）. The effect of BSN on the structure and properties of BSN/KGM aerogels was also studied. The results showed that the BSN/KGM aerogels possessed network porous structure with compact and homogeneous porosity, high specific surface area and low density. With the increase of BSN, the sheet structure of aerogels was converted into the 3D porous network structure, which contributes significantly higher thermal stability. In addition, the BSN/KGM aerogels showed excellent mechanical properties. The maximum relative compression rate was 62%, suggesting the addition of BSN can enhance the compression properties of the BSN/KGM aerogels.

Continental- Margin Structure of Northeast China and Its Adjacent Areas

The continental margin of Northeast China and its adjacent areas is composed of two tectonic belts. The inner belt is a collage made up of fragments resulting from breakup of an old land with the north part related to the evolution of the Palaeo-Asian Ocean and the south part to the evolution of the Palaeo - Pacific Ocean. The outer belt is a Mesozoic terrane, which is a melange made up of fragments of the Late Palaeozoic to Early Mesozoic oceanic crust and the Late M esozoic trench accumulations.There existed another ocean-the Palaeo - Pacific Ocean during the period from the closing of the Palaeo-Asian Ocean to the opening of the modern Pacific Ocean or from the Devonian to Jurassic, and the ocean-floor spreading of the Palaeo - Pacific Ocean led to the formation of the above-mentioned tectonic belts. The development of the strike-slip fault system after the Late Jurassic and the formation of an epicontinental volcano -plutonic rock belt in the Late Cretaceous to Early Tertiary are attributed to the interaction between the modern Pacific plate and the Eurasian plate.

Synthesis and Structure of 2-Isobutyl-6-(2',4'-dichlorophenyl)imidazo[2,1-b]-1,3,4-thiadiazole

The crystal structure of the title compound, 2-isobutyl-6-(2?4?dichlorophenyl)- imidazo[2,1-b]-1,3,4-thiadiazole (C14H13Cl2N3S, Mr = 326.23), has been synthesized by the treatment of 2-amino-5-isobutyl-1,3,4-thiadiazole with a-chloroaceto-2,4-dichlorophenone and determined by single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/n with a = 12.483(7), b = 8.420(4), c = 14.998(8) ? b = 105.770(10)? V = 1517.0(14) 3, Z = 4, Dc = 1.428 g/cm3, S = 0.902, m(MoKa) = 0.558 mm-1, F (000) = 672, R = 0.0579 and wR = 0.1186. The X-ray analytic results showed that all ring atoms in the imidazothiadiazole moiety are almost coplanar. The dihedral angel between the phenyl group and hetero-cycle is 16.8(0.2)?

Symplectic analysis for elastic wave propagation in two-dimensional cellular structures

On the basis of the finite element analysis, the elastic wave propagation in cellular structures is investigated using the symplectic algorithm. The variation principle is first applied to obtain the dual variables and the wave propagation problem is then transformed into two-dimensional （2D） symplectic eigenvalue problems, where the extended Wittrick-Williams algorithm is used to ensure that no phase propagation eigenvalues are missed during computation. Three typical cellular structures, square, triangle and hexagon, are introduced to illustrate the unique feature of the symplectic algorithm in higher-frequency calculation, which is due to the conserved properties of the structure-preserving symplectic algorithm. On the basis of the dispersion relations and phase constant surface analysis, the band structure is shown to be insensitive to the material type at lower frequencies, however, much more related at higher frequencies. This paper also demonstrates how the boundary conditions adopted in the finite element modeling process and the structures＇ configurations affect the band structures. The hexagonal cells are demonstrated to be more efficient for sound insulation at higher frequencies, while the triangular cells are preferred at lower frequencies. No complete band gaps are observed for the square cells with fixed-end boundary conditions. The analysis of phase constant surfaces guides the design of 2D cellular structures where waves at certain frequencies do not propagate in specified directions. The findings from the present study will provide invaluable guidelines for the future application of cellular structures in sound insulation.

Synthesis, Crystal Structure, Fluorescent Property and DFT Calculations of a New Zn(Ⅱ) Complex Based on 3-(2-Pyridyl)-5-(4-pyridyl)-1H-1,2,4-triazole

A new coordination compound Zn（2,4＇-bpt）2（H2O）（1） based on the versatile ligand 2,4＇-Hbpt（2,4？-Hbpt = 3-（2-pyridyl）-5-（4-pyridyl）-1H-1,2,4-triazole） was prepared by hydrothermal reactions. The structure of complex 1 has been characterized by X-ray single-crystal diffraction, elemental analysis, X-ray powder diffraction, IR spectrum analysis and thermogravimetric analysis. Single-crystal X-ray diffraction analysis indicates that the complex belongs to monoclinic system, space group C2/c with a = 23.877（3）, b = 0.7483（9）, c = 1.2492（2） A, b = 92.681（2）°, V = 2230.6（4） A^3, Z = 4, Dc = 1.572 g/cm^3, m = 1.143 mm^-1, Mr = 527.85 and F（000） = 1080. The final R = 0.0581 and wR = 0.0898 with I 〉 2s（I）. 1 is a 0D motif which is connected by hydrogen bonds to form a corrugated 1D pattern. In addition, 1 shows strong photoluminescent emissions in the solid state at room temperature which can be used as potential optical materials. Theoretical calculations based on density functional theory（DFT） were employed in order to explicate the stability and chemical reactivity of 2,4＇-Hbpt with different conformations. The results indicated that conformation I is more stable and prior to coordination in the reactions.

Internal structures and high-velocity frictional properties of Longmenshan fault zone at Shenxigou activated during the 2008 Wenchuan earthquake

This paper reports internal structures of a wide fault zone at Shenxigou,Dujiangyan,Sichuan province,China,and high-velocity frictional properties of the fault gouge collected near the coseismic slip zone during the 2008 Wenchuan earthquake.Vertical offset and horizontal displacement at the trench site were 2.8 m（NW side up）and 4.8 m（right-lateral）,respectively.The fault zone formed in Triassic sandstone,siltstone,and shale about 500 m away from the Yingxiu-Beichuan fault,a major fault in the Longmenshan fault system.A trench survey across the coseismic fault,and observations of outcrops and drill cores down to a depth of 57 m revealed that the fault zone consists of fault gouge and fault breccia of about0.5 and 250-300 m in widths,respectively,and that the fault strikes N62°E and dips 68° to NW.Quaternary conglomerates were recovered beneath the fault in the drilling,so that the fault moved at least 55 m along the coseismic slip zone,experiencing about 18 events of similar sizes.The fault core is composed of grayish gouge（GG） and blackish gouge（BG） with very complex slip-zone structures.BG contains low-crystalline graphite of about 30 %.High-velocity friction experiments were conducted at normal stresses of 0.6-2.1 MPa and slip rates of 0.1-2.1 m/s.Both GG and BG exhibit dramatic slip weakening at constant high slip rates that can be described as an exponential decay from peak friction coefficient lpto steadystate friction coefficient lssover a slip-weakening distance Dc.Deformation of GG and BG is characterized by overlapped slip-zone structures and development of sharp slickenside surfaces,respectively.Comparison of our data with those reported for other outcrops indicates that the high-velocity frictional properties of the Longmenshan fault zones are quite uniform and the high-velocity weakening must have promoted dynamic rupture propagation during the Wenchuan earthquake.

Synthesis, Crystal Structure and DNA-Binding Property of a Mn(Ⅱ) Complex Based on 5-(Tri-fluoromethyl)pyridine-2-carboxylic Acid

A new complex Mn(Htpc)2(H2O)2(1, Htpc = 5-(trifluoromethyl)pyridine-2-carboxylic acid) has been synthesized and characterized by elemental analysis, IR, TG and single-crystal X-ray diffraction. 1 belongs to triclinic system, space group P■ with a = 5.0885(10), b = 6.5574(13), c = 14.016(3) ?, β = 90.67(3)o, V = 436.34(17) ?3, Z = 1, Dc = 1.793 g·cm-3, μ = 0.855 mm-1, Mr = 471.18, F(000) = 235, the final R = 0.0454 and wR = 0.1134 for 1998 observed reflections with I > 2σ(I). The Mn(Ⅱ) ion is coordinated by two N and two O atoms from two Htpc as well as two O atoms from two coordinated water molecules, forming a 0D motif with distorted octahedral coordinate geometry. The adjacent 0D units are linked into 1D chains through hydrogen bond O(1W)–H(1 WB)···O(2), and via the O(1 W)–H(1 WA)···O(1) hydrogen bond the neighboring 1D chains are connected into a 2D supramolecular layer. Moreover, the interactions between the ligand and its complex with CT-DNA were studied by EtBr fluorescence probe, which suggested that these compounds bind to CT-DNA through an intercalation mode. The binding constants were 0.41 and 0.64 for Htpc and complex 1, respectively. It indicates that the interaction between complex 1 and CT-DNA is stronger than Htpc.

Characterization of Structure and Property of the Monocarboxyl Bamboo Pulp Fibers

The oxidized bamboo pulp fiber yarns were prepared by the HNO3?/H3PO4-NaNO2 oxidation system. The effects of the oxidation concentration and reaction time on the weight loss, the carboxyl content and the breaking strength of the bamboo pulp fiber yarns were studied and the aggregation structure was investigated by Fourier transform infrared, X-ray and scanning electron microscopy. The results revealed an increase in carboxyl content and a decrease in breaking strength of oxidized bamboo pulp fiber yarns with increasing concentration of oxidant and reaction time. The breaking strength of oxidized bamboo fiber yarns was damaged seriously once the reaction time was more than 120 min or the concentration of oxidant was greater than 1.0%. The crystallinity of bamboo pulp fibers increased slightly under low oxidation degree but decreased with higher oxidation degree.

Syntheses, Crystal Structures and DNA-binding Properties of Zn(Ⅱ), Ni(Ⅱ) and Co(Ⅱ) Compounds Containing Thiazole Derivatives

Zn(Ⅱ), Ni(Ⅱ) and Co(Ⅱ) compounds(1～3) based on 2-(2-pyridyl)benzothiazole(bpt) and terephthalic acid(PTA) were synthesized. The crystal structures of [Zn(bpt)(PTA)2](1), [Ni(bpt)(PTA)2](2), and [Co(bpt)(PTA)2](3) have been determined by single-crystal X-ray diffraction analysis, which shows that all the three complexes belong to monoclinic system with space group P21/c. Time-dependent density functional theory(TD-DFT) calculation is performed on a reference structure of compound 3. The excited electrons mainly localized at the π* of ligand 2-(2-pyridyl)benzothiazole, which will be convenient for them to bind with the DNA reacting sites. Fluorescence spectroscopy, ultraviolet(UV) spectroscopy and viscosity were used to characterize the interaction of the compounds with Calf thymus DNA(CT-DNA). The results indicate that compounds 1～3 bind to CT-DNA and have a strong interaction with DNA. The compounds can probably bind to CT-DNA via a non-intercalative mode as concluded by studying the viscosity of a DNA solution in the presence of the compounds. This combination can effectively break DNA, which speculates that these three compounds may interact with the cancer cell DNA in this binding mode, thereby damaging the cancer cells.

Crystal Structure and Luminescence of a New Zn(Ⅱ) Complex [Zn(L)(IPP)(H_2O)]·2H_2O Based on Nicotinate Derivative and 1,10-Phenanthroline Derivative

A new Zn（II） complex, [Zn（L）（IPP）（H2O）]＇2H2O（1, H2L = 3-carboxy-l-car- boxymethyl-2-oxidopyridinium and IPP = 2-（1H-imidazo[4,5-f][1,10]phenanthrolin-2-yl）phenol）, was synthesized under hydrothermal conditions and its structure was determined by single-crystal X-ray diffraction. It crystallizes in triclinic, space group Pi with a = 8.5023（17）, b = 9.945（2）, c = 15.573（3） A, a = 95.87（3）, β = 102.56（3）, y = 100.73（3）°, V= 1248.7（4） A3, Z= 2, C27H22N5O9Zn, Mr= 625.87, Dc = 1.665 g/cm^3, F（000） = 642, μ（MoKa） = 1.053 mm^-1, R = 0.0474 and wR = 0.1352. In 1, one L2-, one 1PP and one water molecule coordinate to the same Zn（II） atom to give a discrete complex with two lattice water molecules. Adjacent [Zn（L）（IPP）（H20）].2H20 molecules interact through π-π stacking between two IPP ligands to form a supramolecular chain. The N-H…O and O-H…N hydrogen bonds further stabilize the supramolecular chain structure of 1. The solid state luminescent property of 1 was also studied.

Crystal Structure, Thermal Behavior and Luminescence of a New Copper Coordination Polymer Constructed with 4-(Carboxymethoxy)-benzoic Acid

A new Cu(Ⅱ) coordination polymer, [Cu(L1)(L2)](1), was synthesized under hydrothermal conditions(H_2L1 = 4-(carboxymethoxy)benzoic acid, L2 = 2-(4-fluorophenyl)-1 H-imidazo[4,5-f][1,10]phenanthroline). Crystallographic data for 1: triclinic, space group P1 with a = 9.750(5), b = 10.148(5), c = 12.869(5) ?, α = 104.904(5), β = 102.133(5), γ = 95.219(5)°, V = 1188.7(10) ?~3, Z = 2, C_(28)H_(17)FN_4O_5Cu, Mr = 572.01, D_c = 1.598 g/cm^3, F(000) = 582, μ(MoKa) = 0.977 mm^(-1), R = 0.0474 and w R = 0.1144. The TGA behaviors and luminescence of 1 have been studied in detail. The L1 dianions link neighboring Cu(Ⅱ) atoms in a bis-chelating mode, yielding a one-dimensional chain structure along the b axis. The L2 ligands are attached on one side of the chain through chelating the Cu(Ⅱ) atoms, and are stacked with those of an adjacent chain through π-π interactions, yielding a layer structure. Additionally, the N–H???O hydrogen bonds further stabilize the structure of 1.

Synthesis, Crystal Structure and Antitumor Activity of (E)-4-tert-Butyl-N-(2,4-dichlorobenzylidene)-5-(1,2,4-triazol-1-yl)-thiazol-2-amine

The title compound （E）-4-tert-butyl-N-（2,4-dichlorobenzylidene）-5-（1,2,4-triazol-1-yl）-thiazol-2-amine was synthesized by the reaction of 4-tert-butyl-5-（1,2,4-triazol-1-yl）-thiazol-2-amine with 2,4-dichlorobenzaldehyde, and its crystal structure was determined by singlecrystal X-ray diffraction. The crystal belongs to the triclinic system, space group P1 with a = 7.9748（4）, b = 10.1803（5）, c = 11.4603（6）, α = 102.882（1）, β = 100.253（1）, γ = 104.457（1）°, V = 850.95（7）3, Z = 2, F（000） = 392, C16H15Cl2N5S, Mr = 380.29, Dc = 1.484 g/cm3, S = 1.095, μ = 0.512 mm-1, the final R = 0.0301 and wR = 0.0965 for 3334 observed reflections （I 〉 2σ（I））. The preliminary antitumor activity shows that for the title compound the IC50 of Hela is 0.175 μmol/mL and that of Bel7402 is 0.156 μmol/mL.