Vision sensing of P-GMAW weld pool using narrow band filters with different center wavelengths

The selection of narrow band filter＇s center wavelength has an important influence on the quality of the weld pool image captured in passive vision mettmd for controlling arc welding process. In this paper, 29 narrow band filters with different center wavelengths ranging from ultraviolet to near infrared wavelength were used to capture images of weld pool during both the peak current period and the base current period of P-GMA W （ pulsed gas metal arc welding）. The experimental results showed that the filters with near infrared center wavelength could weaken the arc most during the peak current period, while during the base current period the entire weld pool could be seen with the filters with wavelength above 600 nm. The camera spectral response and the radio of arc to weld pool emission were considered to analyze the phenomenon of experimental results.

Compact superconducting single-and dual-band filter design using multimode stepped-impedance resonator

This study presents two multimode stepped-impedance structures to design single-and dual-band filters. Transmission zeroes are introduced for the single-band filter by using dual-mode stepped-impedance resonators. The single-band filter with high selectivity is centered at 6.02 GHz and has a fractional bandwidth （FBW） of 25.6%. Four stubs （two low frequency and two high frequency ones） are connected to the rectangular patch in the center to construct a quadruple-mode resonator. The independent conditions of the center frequencies of the high and low bands of the resonator are analyzed. A dual-band filter, which operates at 1.53 GHz and 2.44 GHz with FWBs of 12.1% and 14.1%, respectively is designed. The single-and dual-band filters are both fabricated with double-sided YBCO films and they can be used in mobile and satellite communications.

Non-Uniform Pitch Helical Resonators for Dual-Passband Filter Design

This paper presents a study of a non-uniform pitch helical resonator (NPHR) structure and the coupling mechanisms to design dual-passband filters. The previous research analyzes NPHR as a type of step impedance resonator (SIR), however, it does not give analytical equations or prediction for the dual-resonance characteristics of the NPHR structure discussed in this paper. Consequently, a circuit model is proposed to analyze the dual-resonance characteristics of NPHRs. Analytical equations are derived, showing that the frequency ratio of a dual-band NPHR can be determined by the ratio of turns. EM simulation and experimental results have shown good agreement with the circuit analysis. The derived analytical equations from circuit model can be used for fast design of NPHRs. A step-width aperture is proposed to independently control the coupling coefficients at the each band of NPHRs. A third order dual-passband filter has been designed and fabricated. The filter has 3.3% and 3% fractional bandwidths at 789 MHz and 2402 MHz, respectively. The designed prototype filter shows that NPHRs can be utilized to realize compact filters with dual-band characteristics. The filter design can be extended from engineering perspective for application in wireless communication systems.

Narrow-band high-transmittance birefringent filter and its application in wide color gamut display

We propose a narrow-band birefringent filter and its application in wide color gamut.The birefringent filter consists of five phase retarders and two polarizers,and it has both narrow band and high transmittance.In the experiment,we fabricate the birefringent filter using quartz phase retarders and polarizers,and apply it in serval different displays.The color gamuts of displays are enhanced more than 30%NTSC(National Television System Committee),and the widest color gamuts that have been obtained are 126%NTSC in liquid crystal displays and 138%NTSC in organic light-emitting devices.Moreover,the deep blue light in spectrum of display can be reduced using the birefringent filter.The birefringent filter can be an efficient element to achieve wide color gamut display.

Compact high-order quint-band superconducting band-pass filter

In this paper, we present a compact quint-band superconducting filter operating at 2.4, 3.5, 4.7, 5.3, and 5.9 GHz.Matching junctions with different impedance branch lines are used to connect a dual-band sub-filter with a tri-band sub-filter and to reduce the channel interactions. The quint-band filter design is divided into two sections to determine the controllable frequencies and bandwidths, while ensuring compact size and reducing design complexity. The filter is fabricated on double-sided YBCO film deposited on an Mg O substrate with a size of 26 mm×19 mm. The measured results match well with the simulations.

A tunable dual-narrowband band-pass filter using plasma quantum well structure

A tunable dual-narrowband pass-band filter is designed. A one-dimensional photonic crystal （1D PC） is comprised of alternate dielectric layer and vacuum layer. Two quantum wells （QWs） as defects can be constructed by sandwiching two plasma slabs symmetrically in the 1D PC, and a dual-narrowband pass-band filter is formed. The conventional finite- difference time-domain （FDTD） method and piecewise linear current density recursive convolution （PLCDRC）-FDTD method are applied to the dielectric and plasma, respectively. The simulation results illustrate that the dual-narrowband frequencies can be tuned by changing the plasma frequency. The pass band interval and the half-power bandwidths （-3-dB band widths） are related to the space interval between two QWs.

Highly Angular Tolerant Transmission Filters for Narrow-Band Image Sensors

A dielectric transmittance filter composed of subwavelength grating sandwiched between two few-layers distributed Bragg reflectors (DBRs) is proposed with the aim of being compatible with CMOS technology and to be tunable by lithographic means of the grating pattern without the need of thickness changes, in the broad spirit of metamaterials. The DBR mirrors form a Fabry-Perot (FP) cavity whose resonant frequency can be tuned by changing the effective refractive index of the cavity, here, by tailoring the in-plane filling factor of the grating. The structure has been studied and designed by performing numerical simulations using Fourier Modal Method (FMM). This filter proves to have high broad angular tolerance up to ±30˚. This feature is crucial for evaluating the spectral performance of narrow-band filters especially the so-called Ambient light sensors (ALS). By analyzing the transmittance spectral distributions in the band diagram, it is found that the angular tolerance is due to coupling between the FP and the guided mode inside the cavity in analogy to resonances occurring within multimode periodic waveguides in a different context.

Electrically triggered dual-band tunable terahertz metamaterial band-pass filter based on Si_3N_4–VO_2–Si_3N_4 sandwich

We experimentally demonstrate an electrically triggered terahertz(THz) dual-band tunable band-pass filter based on Si_3 N_4–VO_2–Si_3 N_4 sandwich-structured hybrid metamaterials. The insulator–metal phase transition of VO_2 film is induced by the Joule thermal effect of the top metal layer. The finite-integration-time-domain(FITD) method and finite element method(FEM) are used for numerical simulations. The sample is fabricated using a surface micromachining process,and characterized by a THz time-domain-spectrometer(TDS). When the bias current is 0.225 A, the intensity modulation depths at two central frequencies of 0.56 THz and 0.91 THz are about 81.7% and 81.3%, respectively. This novel design can achieve dynamically electric–thermo–optic modulation in the THz region, and has potential applications in the fields of THz communications, imaging, sensing, and astronomy exploration.

Dual-Band Coupled-Line Bandpass Filter with Independently Tunable Bandwidths

This paper reports a novel dual-band coupled-line bandpass filter.Comprising a quadruple-mode coupled-line resonator,this proposed filter could filter signals on two frequency bands.After introducing two varactors,one of the four resonances could be continuously altered by changing the capacitance of the varactors,thus the two frequency bandwidths could be independently tunned.In this paper,the detailed explanation for its operation is given,and the agreement between the expected and practical performance sufficiently confirms the robustness and effectiveness of this proposed filter.

Solar-blind ultraviolet band-pass filter based on metal–dielectric multilayer structures

Solar-blind ultraviolet （UV） band-pass filter has significant value in many scientific, commercial, and military appli- cations, in which the detection of weak UV signal against a strong background of solar radiation is required. In this work, a solar-blind filter is designed based on the concept of ＂transparent metal＂. The filter consisting of Al/SiO2 multilayers could exhibit a high transmission in the solar-blind wavelength region and a wide stopband extending from near-ultraviolet to infrared wavelength range. The central wavelength, bandwidth, Q factor, and rejection ratio of the passband are numerically studied as a function of individual layer thickness and multilayer period.

0.22 THz Waveguide Bandpass Filter with High Stop-Band Suppression

A terahertz（THz） waveguide band-pass filter using an iris inductive window coupled structure was designed and fabricated.The filter was designed at0.22 THz with a pass band of 20 GHz.The measured results show that the center frequency is 0.218 THz with a pass band of 0.205 THz to 0.231 THz,the minimum insertion loss is 1.26 d B at 0.224 THz,and the return loss is less than 13.1 d B.The stop-band suppression is65.6 d B at 0.193 THz and 51.8 d B at 0.243 THz,respectively,which means a good performance of high stop-band suppression.A good agreement exists between the measured S-parameters and the simulated ones,especially in the upper band.The proposed THz waveguide filter has potential applications in THz communications.

Spoof surface plasmon-based bandpass filter with extremely wide upper stopband

We investigate the guiding modes of spoof surface plasmon polaritons （SPPs） on a symmetric ultra-thin plasmonic structure. From the analysis, we deduce the operating frequency region of the single-mode propagation. Based on this property, a spoof SPPs lowpass filter is then constituted in the microwave frequency. By introducing a transmission zero at the lower frequency band using a pair of stepped-impedance stubs, a wide passband filter is further realized. The proposed filter is fed by.a transducer composed of a microstrip line with a flaring ground. The simulated results show that the presented filter has an extremely wide upper stopband in addition to excellent passband filtering characteristics such as low loss, wide band, and high square ratio. A prototype passband filter is also fabricated to validate the predicted performances. The proposed spoof-SPPs filter is believed to be very promising for other surface waveguide components in microwave and terahertz bands.

Development of miniature HTSC wide-band filter with open-loop resonators

The strong electric and magnetic coupled novel HTSC (high temperature superconductor) open-loop microstrip resonators are studied in this report and the traditional structure of open-loop resonators is improved. A miniature wide-band HTSC bandpass filter is developed by the novel structure, which is fabricated on YBCO/LaAlO3/YBCO substrate with dimensions of 14.8×9.6 mm2. This filter is tested at 77 K, and the specifications are that the center frequency is 2230 MHz, the bandwidth is 455 MHz, and the best insertion loss is 0.14 dB in passband.

Experimental demonstration of narrow-band rugate minus filters using rapidly alternating deposition technology

The design, fabrication and performance of narrow-band rugate minus filters are investigated in this paper. A method of fabricating graded-index coatings by rapidly alternating deposition of low（Si O2） and high（Al2 O3） refractive index materials is presented to fabricate a rugate structure. The narrow-band rugate minus filter design and fabrication approaches are discussed in detail. The experimental results, including transmittance spectrum, surface damage test and damage morphology investigated with a scanning electron microscope, demonstrate the high performance of the as-fabricated spatial filter and confirm the feasibility of the fabrication method for narrow-band rugate minus filters.

Single-layer dual-band terahertz filter with weak coupling between two neighboring cross slots

A dual-band terahertz（THz） filter consisting of two different cross slots is designed and fabricated in a single molybdenum layer. Experimental verification by THz time-domain spectroscopy indicates good agreement with the simulation results. Owing to the weak coupling between the two neighboring cross slots in the unit cell, good selectivity performance can be easily achieved, both in the lower and higher bands, by tuning the dimensions of the two crosses. The physical mechanisms of the dual-band resonant are clarified by using three differently configured filters and electric field distribution diagrams. Owing to the rotational symmetry of the cross-shaped filter, the radiation at normal incidence is insensitive to polarization. Compared with the THz dual-band filters that were reported earlier, these filters also have the advantages of easy fabrication and low cost, which would find applications in dual-band sensors, THz communication systems, and emerging THz technologies.

Speech Enhancement Using Cross-Correlation Compensated Multi-Band Wiener Filter Combined with Harmonic Regeneration

The speech signal in general is corrupted by noise and the noise signal does not affect the speech signal uniformly over the entire spectrum. An improved Wiener filtering method is proposed in this paper for reducing background noise from speech signal in colored noise environments. In view of nonlinear variation of human ear sensibility in frequency spectrum, nonlinear multi-band Bark scale frequency spacing approach is used. The cross-correlation between the speech and noise signal is considered in the proposed method to reduce colored noise. To overcome harmonic distortion introduced in enhanced speech, in the proposed method regenerate the suppressed harmonics are regenerated. Objective and subjective tests were carried out to demonstrate improvement in the perceptual quality of speeches by the proposed technique.

Design of UWB Band-pass Filters with GPS Band Rejection

这份报纸论述一个协议极端宽带( UWB )用一个高通行证的过滤器和一个低通行证的过滤器的通带过滤器，并且有我们的建议通带过滤器的 Iumped elements.The 结构的共鸣器很简单，背叛地面结构( DGS )结构被用来让低通行证的过滤器 characteristics.This 建议通带过滤器能比串联类型 filter.As 小得多模拟的结果，插入损失是在整个 2.2 GHz10.6 GHz 的通带的不到 0.3 dB ，当时

Tunable graphene-based mid-infrared band-pass planar filter and its application

We have designed and proposed the edge modes supported by graphene ribbons and the planar band-pass filter consist- ing of graphene ribbons coupled to a graphene ring resonator by using the finite-difference time-domain numerical method. Simulation results show that the edge modes improve the electromagnetic coupling between devices. This structure works as a novel, tunable mid-infrared band-pass filter. Our studies will benefit the fabrication of planar, ultra-compact nano-scale devices in the mid-infrared region. A power splitter consisting of two output ribbons that is useful in photonic integrated devices and circuits is also designed and simulated. These devices are useful for designing ultra-compact planar devices in photonic integrated circuits.

PHASE CORRECTION AND BAND-PASS FILTERS IN CT IMAGING

This paper reports the use of the fast Fourier transform (FFT) in the direct Fourier transform method (DFM) in Computerized Tomography (CT) reconstruction. Phase corrections are needed in the CT reconstruction. In order to eliminate the image distortion from the basic DFM, Padding and band-pass filters are used in the improved DFM. Finally, some reconstructions from simulated projections and several experimental results are given.

DUAL MODE WIDEBAND BAND-PASS FILTER WITH NOTCHED BAND FOR COMMUNICATION SYSTEM

This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.