3D MERGE与3D SPACE STIR序列在腰椎间盘突出症检查中的应用比较

目的:对比三维多回波恢复梯度回波(3D MERGE)、三维可变反转角快速自旋回波(3D SPACE STIR)序列在腰椎间盘突出症(LDH)检查中的应用效果。方法:选择2020年1月~2022年11月收治的135例LDH患者,回顾性分析患者临床和磁共振成像(MRI)资料,所有患者均接受常规MRI扫描及3D MERGE、3D SPACE STIR序列扫描,对比3D MERGE、3D SPACE STIR序列测量神经根直径的一致性,评价两种序列的图像质量参数[信噪比(SNR)、对比噪声比(CNR)]、图像清晰度评分。结果:3D MERGE和3D SPACE STIR序列测量的L3~S1神经根直径比较差异无统计学意义(P>0.05),且两组序列测量的L3、L4、L5和S1直径均显示出较高相关性(r=0.957,0.986,0.975,0.972,P<0.05);3D MERGE序列的SNR及CNR均高于3D SPACE STIR序列,神经根显示分级、图像清晰度评分优于3D SPACE STIR序列,差异有统计学意义(P<0.05)。结论:3D MERGE、3D SPACE STIR序列在LDH神经根直径测量中具有极高一致性,3D MERGE序列较3D SPACE STIR序列能够更清晰显示神经跟的解剖形态,图像质量更好。

中医药多元证据整合方法学MERGE框架

在循证医学时代下,依托规范的技术方法和标准化的操作规程发掘中医药独特优势,是实现中医药现代化、国际化发展并惠泽人类的必由之路。中医理论、人用经验和研究证据三结合证据体系的提出标志着中医药特色评价体系思维方法取得了重要进步,经过恰当方法整合后的多元证据体是中医药临床指南推荐意见和循证卫生决策的有力支撑。本文基于当前国际证据合成与分级方法学前沿进展,初步提出中医药多元证据整合的方法学框架——MERGE(Merge Evidence-based Research and artificial intelliGence to support smart dEcision)框架,以期为中医药循证医学方法学体系的完善和发展提供借鉴和参考。

xStripeMerge:基于纠删码存储的高效宽条带生成方法

为了解决纠删码存储系统的已有宽条带生成方法中扩容方案将产生大量宽条带生成带宽,合并方案受限于双条带的问题,提出了一种针对多条带合并下的宽条带生成问题的高效宽条带生成方法。定义了多条带合并过程的2个关键算子,并将宽条带生成问题建模为组合优化问题,提出了优先寻找具有小的奇偶校验块传输成本的窄条带组合方案的高效宽条带生成方法xStripeMerge。实验结果表明,与目前最优的存储扩容方法相比,xStripeMerge可以减少75%宽条带生成带宽。xStripeMerge的时间和空间复杂度远优于扩展的双条带合并方法,xStripeMerge可以在更短的时间内获得与其性能相近的宽条带生成方案,并且xStripeMerge可以适用于大规模存储系统。

A Strategy for Merging Objective Estimates of Global Daily Precipitation from Gauge Observations, Satellite Estimates, and Numerical Predictions

This paper describes a strategy for merging daily precipitation information from gauge observations, satellite estimates （SEs）, and numerical predictions at the global scale. The strategy is designed to remove systemic bias and random error from each individual daily precipitation source to produce a better gridded global daily precipitation product through three steps. First, a cumulative distribution function matching procedure is performed to remove systemic bias over gauge-located land areas. Then, the overall biases in SEs and model predictions （MPs） over ocean areas are corrected using a rescaled strategy based on monthly precipitation. Third, an optimal interpolation （OI）-based merging scheme （referred as the HL-OI scheme） is used to combine unbiased gahge observations, SEs, and MPs to reduce random error from each source and to produce a gauge--satellite-model merged daily precipitation analysis, called BMEP-d （Beijing Climate Center Merged Estimation of Precipitation with daily resolution）, with complete global coverage. The BMEP-d data from a four-year period （2011- 14） demonstrate the ability of the merging strategy to provide global daily precipitation of substantially improved quality. Benefiting from the advantages of the HL-OI scheme for quantitative error estimates, the better source data can obtain more weights during the merging processes. The BMEP-d data exhibit higher consistency with satellite and gauge source data at middle and low latitudes, and with model source data at high latitudes. Overall, independent validations against GPCP-1DD （GPCP one-degree daily） show that the consistencies between B MEP-d and GPCP-1DD are higher than those of each source dataset in terms of spatial pattern, temporal variability, probability distribution, and statistical precipitation events.

Analyzing floor-stair merging flow based on experiments and simulation

In most situations,staircase is the only egress to evacuate from high-rise buildings.The merging flow on the stair landing has a great influence on the evacuation efficiency.In this paper,we develop an improved cellular automaton model to describe the merging behavior,and the model is validated by a series of real experiments.It is found that the flow rate of simulation results is similar to the drills,which means that the improved model is reasonable and can be used to describe the merging behavior on stairs.Furthermore,some scenarios with different door locations and building floor numbers are simulated by the model.The results show that(i)the best door location is next to the upward staircase;(ii)the total evacuation time and the building floor number are linearly related to each other;(iii)the pedestrians on upper floors have a negative influence on the evacuation flow rate.

An investigation of merging and diverging cars on a multi-lane road using a cellular automation model

In this paper, we have investigated two observed situations in a multi-lane road. The first one concerns a fast merging vehicle. The second situation is related to the case of a fast vehicle leaving the fastest lane back into the slowest lane and targeting a specific way out. We are interested in the relaxation time T, i.e., which is the time that the merging （diverging） vehicle spends before reaching the desired lane. Using analytical treatment and numerical simulations for the NaSch model, we have found two states, namely, the free state in which the merging （diverging） vehicle reaches the desired lane, and the trapped state in which T diverges. We have established phase diagrams for several values of the braking probability. In the second situation, we have shown that diverging from the fast lane targeting a specific way out is not a simple task. Even if the diverging vehicle is in the free phase, two different states can be distinguished. One is the critical state, in which the diverging car can probably reach the desired way out. The other is the safe state, in which the diverging car can surely reach the desired way out. In order to be in the safe state, we have found that the driver of the diverging car must know the critical distance （below which the way out will be out of his reach） in each lane. Furthermore, this critical distance depends on the density of cars, and it follows an exponential law.

Approximate merging of B-spline curves and surfaces

Applying the distance function between two B-spline curves with respect to the L2 norm as the approximate error, we investigate the problem of approximate merging of two adjacent B-spline curves into one B-spline curve. Then this method can be easily extended to the approximate merging problem of multiple B-spline curves and of two adjacent surfaces. After minimizing the approximate error between curves or surfaces, the approximate merging problem can be transformed into equations solving. We express both the new control points and the precise error of approximation explicitly in matrix form. Based on homogeneous coordinates and quadratic programming, we also introduce a new framework for approximate merging of two adjacent NURBS curves. Finally, several numerical examples demonstrate the effectiveness and validity of the algorithm.

Visualizing diffusion tensor fields on streamsurfaces with merging ellipsoids

Streamsurfaces in diffusion tensor fields are used to represent structures with pri- marily planar diffusion. So far, however, no effort has been made on the visualization of the anisotropy of diffusion on them, although this information is very important to identify the problematic regions of these structures. We propose two methods to display this anisotropy information. The first one employs a set of merging ellipsoids, which simultaneously character- ize the local tensor details - anisotropy - on them and portray the shape of the streamsurfaces. The weight between the streamsurfaces continuity and the discrete local tensors can be inter- actively adjusted by changing some given parameters. The second one generates a dense LIC （line integral convolution） texture of the two tangent eigenvector fields along the streamsurfaces firstly, and then blends in some color mapping indicating the anisotropy information. For high speed and high quality of texture images, we confine both the generation and the advection of the LIC texture in the image space. Merging ellipsoids method reveals the entire anisotropy information at discrete points by exploiting the geometric attribute of ellipsoids, and thus suits for local and detailed examination of the anisotropy; the texture-based method gives a global representation of the anisotropy on the whole streamsurfaces with texture and color attributes. To reveal the anisotropy information more efficiently, we integrate the two methods and use them at two different levels of details.

Improved Region Merging Algorithm for Remote Sensing Images

To segment high-resolution remote sensing images(RSIs)accurately on an object level and meet the precise boundary dividing requirement,an improved superpixel segmentation and region merging algorithm is proposed.Simple linear iterative clustering(SLIC)is widely used because of its advantages in performance and effect;however,it causes over-segmentation,which is very disadvantageous to information extraction.In this proposed method,SLIC is firstly adopted for initial superpixel partition.The second stage follows the iterative merging procedure,which uses a hierarchical clustering algorithm and introduces a local binary pattern(LBP)texture feature operator during the process of merging.The experimental results indicate that the proposed method achieved a good segmentation and region merging performance,and worked effectively on cloud detection preprocessing in high-resolution RSIs with cloud and snow overlap situations.

A Ka-band Solid-state Transmitter Cloud Radar and Data Merging Algorithm for Its Measurements

This study concerns a Ka-band solid-state transmitter cloud radar, made in China, which can operate in three different work modes, with different pulse widths, and coherent and incoherent integration numbers, to meet the requirements for cloud remote sensing over the Tibetan Plateau. Specifically, the design of the three operational modes of the radar（i.e., boundary mode M1, cirrus mode M2, and precipitation mode M3） is introduced. Also, a cloud radar data merging algorithm for the three modes is proposed. Using one month＇s continuous measurements during summertime at Naqu on the Tibetan Plateau,we analyzed the consistency between the cloud radar measurements of the three modes. The number of occurrences of radar detections of hydrometeors and the percentage contributions of the different modes＇ data to the merged data were estimated.The performance of the merging algorithm was evaluated. The results indicated that the minimum detectable reflectivity for each mode was consistent with theoretical results. Merged data provided measurements with a minimum reflectivity of -35 dBZ at the height of 5 km, and obtained information above the height of 0.2 km. Measurements of radial velocity by the three operational modes agreed very well, and systematic errors in measurements of reflectivity were less than 2 dB. However,large discrepancies existed in the measurements of the linear depolarization ratio taken from the different operational modes.The percentage of radar detections of hydrometeors in mid- and high-level clouds increased by 60% through application of pulse compression techniques. In conclusion, the merged data are appropriate for cloud and precipitation studies over the Tibetan Plateau.

MERGING AND SPLITTING SECOND-ORDER SELF-SIMILAR PROCESSES (TRAFFICS)

Recent traffic measurements in corporate LANs, Variable Bit Rate (VBR) video sources, ISDN control channels, and other communication systems, have indicated traffic behavior of self similar nature, which has implications for design, control and analysis of high speed networks. Merging and splitting are two basic networking operations. This paper gave the necessary and sufficient conditions for that merging of second order self similar traffic streams also results in a second order self similar stream. It shows that splitting traffic streams of the second order self similar stream are still self similar streams by the independent splitting operation.

Designing an EGP+ESP merging Curriculum for Technical Vocational College Students

The English curriculum in vocational colleges must stress the practical and professional characteristics.This concept should be conducted throughout the entire teaching process,but not just some of the teaching stages.By analysis of the curriculum goals and context of vocational colleges,based on theories of ESP,needs analysis,and experimental research,this article intends to prove the rationality and necessity of the curriculum pattern for non-English majors of vocational colleges by merging ESP into EGP which emphasizing communication as the basic and job orientation as the guidance.

An Improvement of Data Cleaning Method for Grain Big Data Processing Using Task Merging

Data quality has exerted important influence over the application of grain big data, so data cleaning is a necessary and important work. In MapReduce frame, parallel technique is often used to execute data cleaning in high scalability mode, but due to the lack of effective design, there are amounts of computing redundancy in the process of data cleaning, which results in lower performance. In this research, we found that some tasks often are carried out multiple times on same input files, or require same operation results in the process of data cleaning. For this problem, we proposed a new optimization technique that is based on task merge. By merging simple or redundancy computations on same input files, the number of the loop computation in MapReduce can be reduced greatly. The experiment shows, by this means, the overall system runtime is significantly reduced, which proves that the process of data cleaning is optimized. In this paper, we optimized several modules of data cleaning such as entity identification, inconsistent data restoration, and missing value filling. Experimental results show that the proposed method in this paper can increase efficiency for grain big data cleaning.

RESEARCH ON OPTIMIZING THE MERGING RESULTS OF MULTIPLE INDEPENDENT RETRIEVAL SYSTEMS BY A DISCRETE PARTICLE SWARM OPTIMIZATION

The result merging for multiple Independent Resource Retrieval Systems (IRRSs), which is a key component in developing a meta-search engine, is a difficult problem that still not effectively solved. Most of the existing result merging methods, usually suffered a great influence from the usefulness weight of different IRRS results and overlap rate among them. In this paper, we proposed a scheme that being capable of coalescing and optimizing a group of existing multi-sources-retrieval merging results effectively by Discrete Particle Swarm Optimization (DPSO). The experimental results show that the DPSO, not only can overall outperform all the other result merging algorithms it employed, but also has better adaptability in application for unnecessarily taking into account different IRRS's usefulness weight and their overlap rate with respect to a concrete query. Compared to other result merging algorithms it employed, the DPSO's recognition precision can increase nearly 24.6%, while the precision standard deviation for different queries can decrease about 68.3%.

Effect of Merging of the Convective Cloud Clusters on Occurrence of Heavy Rainfall

Sun et al., (1983) have given some favourable environmental conditions and have shown that there are four common features in convective rainstorms. In this paper, an important process of evolution of cloud systems was revealed when heavy rainfall occurred based on the diagnostic analysis of heavy rainfall cases. When the different cloud systems merge into a large one, the mesoscale heavy rainfall occurs and enhances. In other words, the process of evolution of cloud systems emphasized in this paper is the process of interaction between two cloud systems when the heavy rainfall occurs. The favourable environmental condition is also investigated.

Improving Energy Performance of Water Allocation Networks Through Appropriate Stream Merging

在加工工业的水使用操作在水上两个都通常为水有要求质量和温度，并且存在热交换网络的数学模型不能保证一个水网络的精力表演最佳。在这篇论文，在水分配网络的精力性能上的非等温的合并的效果被分析，它包括热交换匹配的动力消耗量，总热交换负担，和数字。三个原则被建议表示在没有增加的非等温的合并的水分配 networks.A 统治的精力性能上的非等温的合并的效果动力消耗量被推出。并且改进水分配网络的精力性能的一条途径是 presented.A 案例研究被给表明方法。

基于VVC的多方向细化Merge模式优化算法

针对多功能视频编码标准VVC帧间预测中,Merge模式未充分考虑运动存在的多种方向性从而降低了预测精度的问题,提出了一种基于VVC的多方向细化Merge模式优化算法。本算法在分析带运动矢量差的Merge技术的基础上,首先调整了步长选择范围并增加多种搜索方向,然后根据步长自适应选择色度块的运动补偿方式,并最终根据率失真代价准则选择最优的运动矢量信息。实验结果表明,本文算法与VTM-12.0参考模型相比,在低延迟P帧配置下Y、U、V三分量的BD-rate分别平均下降了0.57%、0.62%、0.25%,在随机接入配置下的BD-rate中Y分量下降了0.27%、U分量仅提高了0.11%、V分量降低了0.04%,有效地提升了Merge模式的编码性能。

Splitting and Merging Based Multi-model Fitting for Point Cloud Segmentation

This paper deals with the massive point cloud segmentation processing technology on the basis of machine vision, which is the second essential factor for the intelligent data processing of three dimensional conformation in digital photogrammetry. In this paper, multi-model fitting method is used to segment the point cloud according to the spatial distribution and spatial geometric structure of point clouds by fitting the point cloud into different geometric primitives models. Because point cloud usually possesses large amount of 3D points, which are uneven distributed over various complex structures, this paper proposes a point cloud segmentation method based on multi-model fitting. Firstly, the pre-segmentation of point cloud is conducted by using the clustering method based on density distribution. And then the follow fitting and segmentation are carried out by using the multi-model fitting method based on split and merging. For the plane and the arc surface, this paper uses different fitting methods, and finally realizing the indoor dense point cloud segmentation. The experimental results show that this method can achieve the automatic segmentation of the point cloud without setting the number of models in advance. Compared with the existing point cloud segmentation methods, this method has obvious advantages in segmentation effect and time cost, and can achieve higher segmentation accuracy. After processed by method proposed in this paper, the point cloud even with large-scale and complex structures can often be segmented into 3D geometric elements with finer and accurate model parameters, which can give rise to an accurate 3D conformation.

Molecular Dynamics Simulation of Behaviours of Non-Polar Droplets Merging and Interactions with Hydrophobic Surfaces

This paper presents a molecular dynamics simulation of the behaviours of non-polar droplets merging and also the fluid molecules interacting with a hydrophobic surface. Such behaviours and transport phenomena are popular in general microchannel flow boiling and two-phase flow. The droplets are assumed to be composed of Lennards-Jones type molecules. Periodic boundary conditions are applied in three coordinate directions of a 3-D system, where there exist two liquid droplets and their vapour. The two droplets merge when they come within the prescribed small distance. The merging of two droplets apart from each other at different initial distances is tested and the possible larger （or critical） non-dimensional distance, in which droplets merging can occur, is discussed. The evolution of the merging process is simulated numerically by employing the Molecular Dynamics （MD） method. For interactions with hydrophobic solid wall, a system with fluid confined between two walls is used to study the wetting phenomena of fluid and solid wall. The results are compared with those of hydrophilic wall to show the unique characteristics of hydrophobic interactions by microscopic methods.

Optimized Content-Aware Image Resizing with Merging and Improved Importance Diffusion

A simple and effective content-aware image resizing method is proposed based on the row / column merging and improved importance diffusion,which preserves the important regions in an image as well as the global visual effect. By repeatedly merging two rows / columns into one row / column or inserting a new row /column between two rows / columns, this method realizes image-resolution reduction and expansion. The importance of the merged row / column is promoted and diffused to four rows / columns around the merged one,which is to avoid the unwanted image distortions resulted from excessively merging of un-important regions. In addition,the proposed method introduces the direction of gradient vector in the low-pass filter to reduce the interference caused by complex texture background and protect important content better. Furthermore,according to human mechanics principles,different weights are given to the row and column direction components of gradient vectors which can obtain better global visual effect. Experimented results show that the proposed method satisfied in not only visual effect but also objective evaluation.