This paper proposes an improved exponential curvature-compensated bandgap reference circuit to exploit the exponential relationship between the current gainβof the bipolar junction transistor(BJT)and the temperature ...This paper proposes an improved exponential curvature-compensated bandgap reference circuit to exploit the exponential relationship between the current gainβof the bipolar junction transistor(BJT)and the temperature as well as reduce the influence of resistance-temperature dependency.Considering the degraded circuit performance caused by the process deviation,the trimmable module of the temperature coefficient(TC)is introduced to improve the circuit stability.The circuit has the advantages of simple structure,high linear stability,high TC accuracy,and trimmable TC.It consumes an area of 0.09 mm^(2)when fabricated by using the 0.25-μm complementary metal-oxide-semiconductor(CMOS)process.The proposed circuit achieves the simulated power supply rejection(PSR)of about-78.7 dB@1 kHz,the measured TC of~4.7 ppm/℃over a wide temperature range from-55℃to 125℃with the 2.5-V single-supply voltage,and the tested line regulation of 0.10 mV/V.Such a high-performance bandgap reference circuit can be widely applied in high-precision and high-reliability electronic systems.展开更多
A high-PSRR high-order curvature-compensated CMOS bandgap voltage reference( BGR),which has the performances of high power supply rejection ratio( PSRR) and low temperature coefficient,is designed in SMIC 0. 18 μm CM...A high-PSRR high-order curvature-compensated CMOS bandgap voltage reference( BGR),which has the performances of high power supply rejection ratio( PSRR) and low temperature coefficient,is designed in SMIC 0. 18 μm CMOS process. Compared to the conventional curvature-compensated BGR which adopted a piecewise-linear current,the temperature characterize of the proposed BGR is effectively improved by adopting two kinds of current including a piecewise-linear current and a current proportional 1. 5 party to the absolute temperature T. By adopting a low dropout( LDO) regulator whose output voltage is the operating supply voltage of the proposed BGR core circuit instead of power supply voltage VDD,the proposed BGR with LDO regulator achieves a well PSRR performance than the BGR without LDO regulator. Simulation results show that the proposed BGR with LDO regulator achieves a temperature coefficient of 2. 1 × 10-6/ ℃ with a 1. 8 V power supply voltage and a line regulation of 4. 9 μV / V at 27 ℃. The proposed BGR with LDO regulator at 10 Hz,100 Hz,1 k Hz,10 k Hz and 100 k Hz have the PSRR of- 106. 388,- 106. 388,- 106. 38,- 105. 93 and-88. 67 d B respectively.展开更多
A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of ...A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio（ PSRR） of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^（-6）/℃-9. 56 × 10^（-6）/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^（-6）/℃.展开更多
A novel curvature-compensated CMOS bandgap voltage reference is presented. The reference utilizes two first order temperature compensations generated from the nonlinearity of the finite current gain β of vertical pnp...A novel curvature-compensated CMOS bandgap voltage reference is presented. The reference utilizes two first order temperature compensations generated from the nonlinearity of the finite current gain β of vertical pnp bipolar transistor. The proposed circuit, designed in a standard 0.18 μm CMOS process, achieves a good temperature coefficient of 2.44 ppm/℃ with temperature range from --40℃ to 85 ℃, and about 4 mV supply voltage variation in the range from 1.4 V to 2.4 V. With a 1.8 V supply voltage, the power supply rejection ratio is -56dB at 10MHz.展开更多
A bandgap voltage reference is designed to meet the requirements of low power loss,low temperature coefficient and high power source rejection ratio(PSRR) in the intergrated circuit. Based on the analysis of conventio...A bandgap voltage reference is designed to meet the requirements of low power loss,low temperature coefficient and high power source rejection ratio(PSRR) in the intergrated circuit. Based on the analysis of conventional bandgap reference circuit,and combined with the integral performance of IC,the specific design index of the bandgap reference is put forward. In the meantime,the circuit and the layout are designed with Chartered 0.35 μm dual gate CMOS process. The simulation result shows that the coefficient is less than 30ppm/℃ with the temperature from -50 ℃ to 150 ℃. The bandgap reference has the characteristics of low power and high PSRR.展开更多
文摘This paper proposes an improved exponential curvature-compensated bandgap reference circuit to exploit the exponential relationship between the current gainβof the bipolar junction transistor(BJT)and the temperature as well as reduce the influence of resistance-temperature dependency.Considering the degraded circuit performance caused by the process deviation,the trimmable module of the temperature coefficient(TC)is introduced to improve the circuit stability.The circuit has the advantages of simple structure,high linear stability,high TC accuracy,and trimmable TC.It consumes an area of 0.09 mm^(2)when fabricated by using the 0.25-μm complementary metal-oxide-semiconductor(CMOS)process.The proposed circuit achieves the simulated power supply rejection(PSR)of about-78.7 dB@1 kHz,the measured TC of~4.7 ppm/℃over a wide temperature range from-55℃to 125℃with the 2.5-V single-supply voltage,and the tested line regulation of 0.10 mV/V.Such a high-performance bandgap reference circuit can be widely applied in high-precision and high-reliability electronic systems.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61471075)the 2013 Program for Innovation Team Building at Institutions of Higher Education in Chongqing(The Innovation Team of Smart Medical System and Key Technology)
文摘A high-PSRR high-order curvature-compensated CMOS bandgap voltage reference( BGR),which has the performances of high power supply rejection ratio( PSRR) and low temperature coefficient,is designed in SMIC 0. 18 μm CMOS process. Compared to the conventional curvature-compensated BGR which adopted a piecewise-linear current,the temperature characterize of the proposed BGR is effectively improved by adopting two kinds of current including a piecewise-linear current and a current proportional 1. 5 party to the absolute temperature T. By adopting a low dropout( LDO) regulator whose output voltage is the operating supply voltage of the proposed BGR core circuit instead of power supply voltage VDD,the proposed BGR with LDO regulator achieves a well PSRR performance than the BGR without LDO regulator. Simulation results show that the proposed BGR with LDO regulator achieves a temperature coefficient of 2. 1 × 10-6/ ℃ with a 1. 8 V power supply voltage and a line regulation of 4. 9 μV / V at 27 ℃. The proposed BGR with LDO regulator at 10 Hz,100 Hz,1 k Hz,10 k Hz and 100 k Hz have the PSRR of- 106. 388,- 106. 388,- 106. 38,- 105. 93 and-88. 67 d B respectively.
基金Supported by the National Natural Science Foundation of China(61604109)the National High-Tech R&D Program of China(2015AA042605)
文摘A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio（ PSRR） of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^（-6）/℃-9. 56 × 10^（-6）/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^（-6）/℃.
文摘A novel curvature-compensated CMOS bandgap voltage reference is presented. The reference utilizes two first order temperature compensations generated from the nonlinearity of the finite current gain β of vertical pnp bipolar transistor. The proposed circuit, designed in a standard 0.18 μm CMOS process, achieves a good temperature coefficient of 2.44 ppm/℃ with temperature range from --40℃ to 85 ℃, and about 4 mV supply voltage variation in the range from 1.4 V to 2.4 V. With a 1.8 V supply voltage, the power supply rejection ratio is -56dB at 10MHz.
文摘A bandgap voltage reference is designed to meet the requirements of low power loss,low temperature coefficient and high power source rejection ratio(PSRR) in the intergrated circuit. Based on the analysis of conventional bandgap reference circuit,and combined with the integral performance of IC,the specific design index of the bandgap reference is put forward. In the meantime,the circuit and the layout are designed with Chartered 0.35 μm dual gate CMOS process. The simulation result shows that the coefficient is less than 30ppm/℃ with the temperature from -50 ℃ to 150 ℃. The bandgap reference has the characteristics of low power and high PSRR.
