We experimentally demonstrate a mechanically tunable metamaterials terahertz（THz） dual-band bandstop filter. The unit cell of the filter contains an inner aluminum circle and an outside aluminum Ohm-ring on high res...We experimentally demonstrate a mechanically tunable metamaterials terahertz（THz） dual-band bandstop filter. The unit cell of the filter contains an inner aluminum circle and an outside aluminum Ohm-ring on high resistance silicon substrate. The performance of the filter is simulated by finite-integration-time-domain（FITD） method. The sample is fabricated using a surface micromachining process and experimentally demonstrated using a THz time-domain-spectroscopy（TDS） system. The results show that, when the incident THz wave is polarized in y-axis, the filter has two intensive absorption peaks locating at 0.71 THz and 1.13 THz, respectively. The position of the high-frequency absorption peak and the amplitude of the low-frequency absorption peak can be simultaneously tuned by rotating the sample along its normal axis.The tunability of the high-frequency absorption peak is due to the shift of resonance frequency of two electrical dipoles,and that of the low-frequency absorption peak results from the effect of rotationally induced transparent. This tunable filter is very useful for switch, manipulation, and frequency selective detection of THz beam.展开更多
In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical an...In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical and electrical size of the CSRR. The bandstop filter is produced by an array of miniaturized loaded CSRRs etched on the center line of a microstrip. The size of the proposed filter, is as small as 0.58 cm2, and its electrical length is very small with only 0.08 λ0), compared to a conventional bandstop filter, a miniaturization of a factor 5 while the bandstop performance is maintained. A very good agreement obtained between the measurement and the simulation results.展开更多
A microstrip ultra-wideband (UWB) filter with unique shape, compactness, simplicity of operation and flexible notch characteristics is introduced. It is based on the fundamental and harmonic characteristics of a 50 Oh...A microstrip ultra-wideband (UWB) filter with unique shape, compactness, simplicity of operation and flexible notch characteristics is introduced. It is based on the fundamental and harmonic characteristics of a 50 Ohm transmission line that is grounded at both ends. The filter possesses design flexibility in the sense that it can operate as a stand-alone UWB component or include simple additional circuitry to create one or two notches within the ultra-wideband frequency range. The basic design principles are highlighted and verified using the results of two commercially available field solver packages. Individual filter structures with single and double notches are validated through measurements of a number of filter prototypes.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61265005 and 11574059)the Natural Science Foundation of Guangxi,China(Grant Nos.2015GXNSFDA19039 and 2014GXNSFAA118376)+1 种基金the Foundation from Guangxi Key Laboratory of Automatic Detection Technology and Instrument,China(Grant Nos.YQ14114 and YQ15106)the Innovation Project of Guangxi Graduate Education,China(Grant Nos.2016YJCX03 and2016YJCX31)
文摘We experimentally demonstrate a mechanically tunable metamaterials terahertz（THz） dual-band bandstop filter. The unit cell of the filter contains an inner aluminum circle and an outside aluminum Ohm-ring on high resistance silicon substrate. The performance of the filter is simulated by finite-integration-time-domain（FITD） method. The sample is fabricated using a surface micromachining process and experimentally demonstrated using a THz time-domain-spectroscopy（TDS） system. The results show that, when the incident THz wave is polarized in y-axis, the filter has two intensive absorption peaks locating at 0.71 THz and 1.13 THz, respectively. The position of the high-frequency absorption peak and the amplitude of the low-frequency absorption peak can be simultaneously tuned by rotating the sample along its normal axis.The tunability of the high-frequency absorption peak is due to the shift of resonance frequency of two electrical dipoles,and that of the low-frequency absorption peak results from the effect of rotationally induced transparent. This tunable filter is very useful for switch, manipulation, and frequency selective detection of THz beam.
文摘In this paper, a design of very compact microstrip bandstop filters based on complementary split ring resonators (CSRRs) is proposed. Two techniques of metamaterial miniaturization are used to optimize the physical and electrical size of the CSRR. The bandstop filter is produced by an array of miniaturized loaded CSRRs etched on the center line of a microstrip. The size of the proposed filter, is as small as 0.58 cm2, and its electrical length is very small with only 0.08 λ0), compared to a conventional bandstop filter, a miniaturization of a factor 5 while the bandstop performance is maintained. A very good agreement obtained between the measurement and the simulation results.
文摘A microstrip ultra-wideband (UWB) filter with unique shape, compactness, simplicity of operation and flexible notch characteristics is introduced. It is based on the fundamental and harmonic characteristics of a 50 Ohm transmission line that is grounded at both ends. The filter possesses design flexibility in the sense that it can operate as a stand-alone UWB component or include simple additional circuitry to create one or two notches within the ultra-wideband frequency range. The basic design principles are highlighted and verified using the results of two commercially available field solver packages. Individual filter structures with single and double notches are validated through measurements of a number of filter prototypes.
