This paper presents a real-time battery management unit designed by applying the Coulomb counting method and intended for use in an integrated renewable energy system for PV-Hybrid power supply. Battery management is ...This paper presents a real-time battery management unit designed by applying the Coulomb counting method and intended for use in an integrated renewable energy system for PV-Hybrid power supply. Battery management is required to stabilize hybrid systems and extend battery lifetimes. The battery management unit is divided into three main stages. Firstly, analysis of the basic components of the battery type used in the system is considered. Secondly, the state of charge (SOC) estimation method and the deterioration factor of the battery are analyzed. Finally, the overall battery management system, including a computer-based measurement and control unit, is constructed. The control system displays real-time information through LabVIEW 8.5 by estimating the state of charge through various measurements. The system will issue alerts when malfunctions are detected, and the operator can analyze and react to the system in real time to stabilize the system and extend the battery lifetime.展开更多
The current research of vehicle electrical power supply system mainly focuses on electric vehicles(EV) and hybrid electric vehicles(HEV).The vehicle electrical power supply system used in traditional fuel vehicles...The current research of vehicle electrical power supply system mainly focuses on electric vehicles(EV) and hybrid electric vehicles(HEV).The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect;electrical/electronic devices(EEDs) applied in vehicles are usually directly connected with the vehicle's battery.With increasing numbers of EEDs being applied in traditional fuel vehicles,vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively.In this paper,a new vehicle electrical power supply system for traditional fuel vehicles,which accounts for all electrical/electronic devices and complex work conditions,is proposed based on a smart electrical/electronic device(SEED) system.Working as an independent intelligent electrical power supply network,the proposed system is isolated from the electrical control module and communication network,and access to the vehicle system is made through a bus interface.This results in a clean controller power supply with no electromagnetic interference.A new practical battery state of charge(So C) estimation method is also proposed to achieve more accurate So C estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel.Optimized protection methods are also used to ensure power supply safety.Experiments and tests on a traditional fuel vehicle are performed,and the results reveal that the battery So C is calculated quickly and sufficiently accurately for battery over-discharge protection.Over-current protection is achieved,and the entire vehicle's power utilization is optimized.For traditional fuel vehicles,the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture,enhancing system reliability and security.展开更多
The BALIN is a modern device,consisting of a battery with integrated battery charger,dedicated to powering the 24 V services of the carriages.In various Trenitalia rolling stock,used for the regional transport of trav...The BALIN is a modern device,consisting of a battery with integrated battery charger,dedicated to powering the 24 V services of the carriages.In various Trenitalia rolling stock,used for the regional transport of travelers,there are old and obsolete battery charger devices and there are lead acid batteries that need frequent maintenance operations to be kept efficient.These components,due to their low reliability,are the source of serious disruptions to passenger transport,and the management of their maintenance involves high costs for Trenitalia.In order to solve these problems,Trenitalia has therefore decided to invest resources to develop a new system of integrated power supplies and batteries,therefore the BALIN has been developed.The main advantages of BALIN compared to the original components are the presence of a high energy efficiency battery charger designed to operate in a wide range of temperatures and the presence of sealed lead-acid batteries without maintenance with a life exceeding 6 years.The BALIN is able to disconnect its own batteries from the carriage electrical circuits.The BALIN battery charger also implements an intelligent battery management logic and thanks to the interface with the command and control signals present on the rolling stock,the batteries are isolated from the carriage electric load automatically when the train is off and the service it's over.Another important automatic feature of the BALIN is to protect its batteries from deep discharge,in fact the power supply from the batteries to the electric carriage loads is interrupted when the voltage reaches 21 V.The characteristics mentioned go towards the reduction of the charge/discharge cycles of batteries and contribute to increasing the reliability and durability of batteries throughout the entire life of the rolling stock.展开更多
随着汽车技术的不断发展,汽车的电气设备种类越来越多,电器消耗的电能占整车能量比重不断上升,对汽车低压电源管理提出更高要求。为满足用户日益增长的汽车电子设备用电需求,达到减少整车能量消耗、提高电池充电效率的目的,在对纯电动...随着汽车技术的不断发展,汽车的电气设备种类越来越多,电器消耗的电能占整车能量比重不断上升,对汽车低压电源管理提出更高要求。为满足用户日益增长的汽车电子设备用电需求,达到减少整车能量消耗、提高电池充电效率的目的,在对纯电动汽车负载进行分类的基础上,利用遗传算法对用于电量安全分级的低压电池荷电状态(state of charge,SOC)进行优化,并提出一种基于SOC的4级恒流低压锂电池充电管理策略;利用AVL-Cruise和MATLAB-Simulink软件联合仿真搭建车辆模型,采用不同工况进行仿真验证和对比分析。结果表明,低压锂电池电源管理策略能够满足纯电动汽车的电量安全性要求,在一定程度上提高了整车经济性;优化后的锂电池充电效率有一定的提高,充电时间也有所减少。展开更多
文摘This paper presents a real-time battery management unit designed by applying the Coulomb counting method and intended for use in an integrated renewable energy system for PV-Hybrid power supply. Battery management is required to stabilize hybrid systems and extend battery lifetimes. The battery management unit is divided into three main stages. Firstly, analysis of the basic components of the battery type used in the system is considered. Secondly, the state of charge (SOC) estimation method and the deterioration factor of the battery are analyzed. Finally, the overall battery management system, including a computer-based measurement and control unit, is constructed. The control system displays real-time information through LabVIEW 8.5 by estimating the state of charge through various measurements. The system will issue alerts when malfunctions are detected, and the operator can analyze and react to the system in real time to stabilize the system and extend the battery lifetime.
基金Supported by Collaborative Innovation Center of Intelligent New Energy Vehicle of U.S.and China-Clean Energy Research Center,Fund of China Scholarship Council(Grant No.201406215015)
文摘The current research of vehicle electrical power supply system mainly focuses on electric vehicles(EV) and hybrid electric vehicles(HEV).The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect;electrical/electronic devices(EEDs) applied in vehicles are usually directly connected with the vehicle's battery.With increasing numbers of EEDs being applied in traditional fuel vehicles,vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively.In this paper,a new vehicle electrical power supply system for traditional fuel vehicles,which accounts for all electrical/electronic devices and complex work conditions,is proposed based on a smart electrical/electronic device(SEED) system.Working as an independent intelligent electrical power supply network,the proposed system is isolated from the electrical control module and communication network,and access to the vehicle system is made through a bus interface.This results in a clean controller power supply with no electromagnetic interference.A new practical battery state of charge(So C) estimation method is also proposed to achieve more accurate So C estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel.Optimized protection methods are also used to ensure power supply safety.Experiments and tests on a traditional fuel vehicle are performed,and the results reveal that the battery So C is calculated quickly and sufficiently accurately for battery over-discharge protection.Over-current protection is achieved,and the entire vehicle's power utilization is optimized.For traditional fuel vehicles,the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture,enhancing system reliability and security.
文摘The BALIN is a modern device,consisting of a battery with integrated battery charger,dedicated to powering the 24 V services of the carriages.In various Trenitalia rolling stock,used for the regional transport of travelers,there are old and obsolete battery charger devices and there are lead acid batteries that need frequent maintenance operations to be kept efficient.These components,due to their low reliability,are the source of serious disruptions to passenger transport,and the management of their maintenance involves high costs for Trenitalia.In order to solve these problems,Trenitalia has therefore decided to invest resources to develop a new system of integrated power supplies and batteries,therefore the BALIN has been developed.The main advantages of BALIN compared to the original components are the presence of a high energy efficiency battery charger designed to operate in a wide range of temperatures and the presence of sealed lead-acid batteries without maintenance with a life exceeding 6 years.The BALIN is able to disconnect its own batteries from the carriage electrical circuits.The BALIN battery charger also implements an intelligent battery management logic and thanks to the interface with the command and control signals present on the rolling stock,the batteries are isolated from the carriage electric load automatically when the train is off and the service it's over.Another important automatic feature of the BALIN is to protect its batteries from deep discharge,in fact the power supply from the batteries to the electric carriage loads is interrupted when the voltage reaches 21 V.The characteristics mentioned go towards the reduction of the charge/discharge cycles of batteries and contribute to increasing the reliability and durability of batteries throughout the entire life of the rolling stock.
文摘随着汽车技术的不断发展,汽车的电气设备种类越来越多,电器消耗的电能占整车能量比重不断上升,对汽车低压电源管理提出更高要求。为满足用户日益增长的汽车电子设备用电需求,达到减少整车能量消耗、提高电池充电效率的目的,在对纯电动汽车负载进行分类的基础上,利用遗传算法对用于电量安全分级的低压电池荷电状态(state of charge,SOC)进行优化,并提出一种基于SOC的4级恒流低压锂电池充电管理策略;利用AVL-Cruise和MATLAB-Simulink软件联合仿真搭建车辆模型,采用不同工况进行仿真验证和对比分析。结果表明,低压锂电池电源管理策略能够满足纯电动汽车的电量安全性要求,在一定程度上提高了整车经济性;优化后的锂电池充电效率有一定的提高,充电时间也有所减少。