Suitability evaluation plays an important role in land reclamation because the choice of evaluation methods affects the accuracy and objectivity of the suitability evaluation results. Furthermore, it influences the de...Suitability evaluation plays an important role in land reclamation because the choice of evaluation methods affects the accuracy and objectivity of the suitability evaluation results. Furthermore, it influences the decision-making related to land reclamation. An improved method, which is called limit comprehensive conditions method, was developed after different suitability evaluation methods were studied. Based on this method, the reclaimed land of the Gaoqiao bauxite mining area was evaluated. The Gaoqiao mining area was divided into seven evaluation units that were evaluated respectively by selecting evaluation factors and establishing grade standards. The results show that the proposed method is more applicable and easier to handle. Moreover, its evaluation results are more scientific compared with the traditional evaluation methods. The improved method can be beneficial to the rapid monitoring and the effective management of reclaimed land in the opencast mine area.展开更多
The Tan Rai Bauxite Project, which exploits a large bauxite mine in Lam Dong province, Vietnam has been in operation since 2012. In addition to the economic efficiency of the project, bauxite mining and processing use...The Tan Rai Bauxite Project, which exploits a large bauxite mine in Lam Dong province, Vietnam has been in operation since 2012. In addition to the economic efficiency of the project, bauxite mining and processing uses a large area arable land and affect the regional environment. Remote sensing technology is increasingly widely used in many purposes in monitoring the changes of environment and resources, including land use change with high accuracy, giving managers more information to monitor the exploitation and use process of land resource. This study used a Change Vector Analysis (CVA) method of analysis on various remote sensing data sources to monitor the process of land exploitation and restoration of the Tan Rai Bauxite project. High-resolution remote sensing images were used as diverse as SPOT-5, VNREDSat-1, Google Earth from 2013 to 2019 to demonstrate the ability of the MCVA method to combine many other types of remote sensing images together. The results of fluctuation analysis were validated by 200 random points in the study area, and the accuracy of result is more than 90%. The results of land use change statistics were also compared with the annual data of Tan Rai Bauxite Factory. From this study, it can be concluded that the MCVA analysis method can quickly detect land use change areas and can combine many different image sources with a high accuracy. In addition, it also provides statistics of mining areas and restored areas, thereby assisting managers in monitoring the operation of the mine.展开更多
Two non-destructive analytical techniques (gamma spectrometer and X-ray diffractometer) were employed in the analysis of bauxite and rutile ore and their vicinity soil and control sourced within the Kanam and Wase min...Two non-destructive analytical techniques (gamma spectrometer and X-ray diffractometer) were employed in the analysis of bauxite and rutile ore and their vicinity soil and control sourced within the Kanam and Wase mineral exploration sites. The activity concentrations of natural radionuclides <sup>238</sup>U, <sup>232</sup>Th, and <sup>40</sup>K in the soil samples received from bauxite and rutile mineral mining vicinities revealed high concentrations of <sup>238</sup>U, <sup>232</sup>Th, and <sup>40</sup>K compared to the control soil samples sourced 500 m away from the mineral exploration vicinities. Radiological detriments RLI, AUI, Hin and Hex unveiled values exceeding the radiation standard concentration (>1) for soil. X-ray diffraction characterization of bauxite ore revealed the interlocking minerals of Bauxite (18)%, Albite (11)%, Garnet (15)%, Illite (6)% and Muscovite (43)% in various proportions obtained within the 2θ range (9.18 to 64.4) and a peak value (intensity, cps) of 3400. Pure bauxite percentage in the ore meets metallurgical grade (15 - 25)%. X-ray diffraction of rutile ore revealed the minerals of rutile (40)%, quartz (21.4)%, ilmenite (27)% and garnet (11.8)% found within the 2θ range (27.5 to 35.6) and a peak value intensity of 31.1 - 100.0 cps also meeting the metallurgical grade of 15% - 25%. The major environmental concern associated with the mineral-sands industry is the radiation hazards, pollution of ground-water sources from heavy metals, mineral transport with heavy equipment’s, dredging operations in fragile coastal area and clearing of vegetation.展开更多
Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore charact...Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.展开更多
Jajarm's bauxite deposits are mainly diasporic, and they have a low mass ratio of Al2O3/SiO2. It is necessary to increase the run-of-mine mass ratio before feeding the material to the Bayer process. Chemical analysis...Jajarm's bauxite deposits are mainly diasporic, and they have a low mass ratio of Al2O3/SiO2. It is necessary to increase the run-of-mine mass ratio before feeding the material to the Bayer process. Chemical analysis indicated that the low-grade bauxite sample from Jajarm contained 43.9wt% Al2O3 and 13.35wt% SiO2, resulting in a mass ratio of 3.29. According to mineralogical studies, the presence of aluminosilicate minerals such as kaolinite, illite, and quartz was the main reason for the decrease of the mass ratio. Microscopic observations revealed that, with the size reduction from -1000+710 to -38 μm, the liberation degree of diaspore increased from 10% to 60%, and that of aluminosilicates increased from 20% to 85%. Heavy liquids with the densities of 2.8, 3.0, 3.2, and 3.4 g/cm3 were used to evaluate the heavy media separation in three sizes, i.e., -3350+710, -710+212, and -212+125 μm. Laboratory studies confirm that the density of 3.2 g/cm3 can produce the concentrates (in sunk fractions) with recoveries of 89.09%, 91.24%, and 84.68% with the Al2O3/SiO2 mass ratios of 5.03, 5.16, and 5.15 for the -3350+710, -710+212, and -212+ 125 μ m sizes, respectively.展开更多
To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication pro...To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication process in Na OH solution under atmospheric pressure. The desulfurization and desilication properties and mineralogical evolution were studied by X-ray diffraction, thermogravimetry–differential thermal analysis, scanning electron microscopy, and FactSage methods. The results demonstrate that the suspension calcination method is efficient for sulfur removal: 84.21% of S was removed after calcination at 1000°C for 2 min. During the calcination process, diaspore and pyrite were transferred to α-Al2O3, magnetite, and hematite. The phase transformation of pyrite follows the order FeS2 → Fe3O4 → Fe2O3, and the iron oxides and silica were converted into iron silicate. In the alkali-soluble desilication process, the optimum condition was an alkali solution concentration of 110 g/L, a reaction time of 20 min, and a reaction temperature of 95°C. The corresponding desilication ratio and alumina loss ratio were 44.9% and 2.4%, respectively, and the alumina-to-silica mass ratio of the concentrate was 7.9. The Al2O3·2SiO2, SiO2, and Al2O3 formed during the calcination process could react with Na OH solution, and their activity decreased in the order of Al2O3·2 SiO2, SiO2, and Al2O3.展开更多
The complex of mineralogical methods was developed to obtain reliable data about mineral composition of bauxites and new crystal-chemical information (the whole cycle of used chemical elements, methods of residue util...The complex of mineralogical methods was developed to obtain reliable data about mineral composition of bauxites and new crystal-chemical information (the whole cycle of used chemical elements, methods of residue utilization, position of residue tails in dump pits). Natural and technogenic structures were studied as sources of necessary chemical elements and useful properties.展开更多
Assessing the potential uses as industrial mineral, bauxite from Débélé, Guinea, has been characterised by chemical and mineralogical analyses, the determination of the amorphous content, the rate of po...Assessing the potential uses as industrial mineral, bauxite from Débélé, Guinea, has been characterised by chemical and mineralogical analyses, the determination of the amorphous content, the rate of portlandite consumption in an aqueous solution, the strength activity index, and the thermal behaviour up to 1200<span style="white-space:nowrap;">°</span>C. It was evidenced that the raw sample is gibbsite-rich type bauxite with about 45.06 wt% of alumina, 23.80 wt% of iron oxide, and 1.74 wt% of silica. It meets the chemical composition required for bauxites used for refractory cement. During heating, the raw bauxite undergoes high densification with low linear shrinkage, motivating a potential use in dense ceramic compositions with high thermal stability. Also, the heating at only 600<span style="white-space:nowrap;">°</span>C gives a significant pozzolanic activity in combination with Portland cement. The correlation between the pozzolanicity, the amorphous phase content, and the specific surface area indicated that the raw and the calcined materials present an interesting reactivity for using them in alternative cement formulations.展开更多
China Power Investment Group(CPI),one of the five power generation groups in China signed an Aluminum Development Project Concession Agreement with the government of Guinea on Sep.6,symbolizing a substantial step in d...China Power Investment Group(CPI),one of the five power generation groups in China signed an Aluminum Development Project Concession Agreement with the government of Guinea on Sep.6,symbolizing a substantial step in developing its Guinean aluminum base展开更多
With the acceleration of industrialization of extraction of alumina from high aluminum fly ash technology, the West Inner Mongolia coalfield is expected to become the largest bauxite mine with the largest aluminum res...With the acceleration of industrialization of extraction of alumina from high aluminum fly ash technology, the West Inner Mongolia coalfield is expected to become the largest bauxite mine with the largest aluminum reserves in China.展开更多
According to Guangxi General Institute of Geological Prospecting,after 3 years of hard work,prospecting team has discovered extra large bauxite mines with resources of 120 mil- lion tons in Youjiang area in Guangxi. I...According to Guangxi General Institute of Geological Prospecting,after 3 years of hard work,prospecting team has discovered extra large bauxite mines with resources of 120 mil- lion tons in Youjiang area in Guangxi. It is said that the newly-found extra large baux- ite mines are situated in the city of Congzuo. The ore belt lays generally northeast with展开更多
On July 26,Guangxi Huaying bauxite mine was put into production upon its completion. With supportive function,the mine facilitates the 1.6-million-ton/year alumina project of Guangxi Huaying with annual capacity of 4 ...On July 26,Guangxi Huaying bauxite mine was put into production upon its completion. With supportive function,the mine facilitates the 1.6-million-ton/year alumina project of Guangxi Huaying with annual capacity of 4 million tons of ores.The open-pit展开更多
The bauxitic region of Sumbi and its surroundings in Central Kongo (DR Congo) is located in an area corresponding to “bands” of basic rocks made up of microdolerites, basalts and andesites. The problem of this study...The bauxitic region of Sumbi and its surroundings in Central Kongo (DR Congo) is located in an area corresponding to “bands” of basic rocks made up of microdolerites, basalts and andesites. The problem of this study is linked to the similarity of the phenomena that generated the depositional process of these ferruginous and aluminous formations. The aim of this article is to carry out a chemical and petrographic study of samples of bauxitic materials from the Mayedo and Kinzoki regions, with a view to their possible recovery. To this end, the chemical and petrographic analysis of the weathering formations outcropping in the study area was carried out using X-ray fluorescence and thin section methods. The latter revealed that two lithologies were detected in the healthy rocks: basalts with a mineralogical assemblage of plagioclase crystals, pyroxene microcrystals and oxide opaques;and dolerites represented by plagioclase crystals, pyroxenes and a few quartz crystals. X-ray fluorescence revealed high levels of Al<sub>2</sub>O<sub>3</sub> (32.69%) in the Mayedo zone (MHb1). This visibly gibbsite-rich level corresponds to the zone of friable, homogeneous bauxite with a massive, blood-red texture, with an estimated gibbsite percentage of 55.50. The percentage of Fe<sub>2</sub>O<sub>3</sub> is high in these zones at 42.77%, hence the dark red colour, reflecting a strong zone of ferruginasation. This horizon contains a high concentration of hematite and goethite minerals. Highly variable SiO<sub>2</sub> contents ranging from 13.48% to 40.82%. These variations are essentially due to the dissolution of silica by leaching and resilification.展开更多
The increasing demand for Aluminium pushes the miners to multiply the research in order to answer this demand. The objective of this work is to characterize the bauxitic deposit of Limbiko. The methodology consists in...The increasing demand for Aluminium pushes the miners to multiply the research in order to answer this demand. The objective of this work is to characterize the bauxitic deposit of Limbiko. The methodology consists in collecting samples, and establishing stratigraphic logs, sections and geological maps. The analyses were carried out in the laboratory of the Company des Bauxites de Guinea. Statistical methods were used to process the geochemical data. The study area is characterized by sedimentary formations of the Devonian, in which the dolerites of the Mesozoic were injected. It is on these Devonian and Mesozoic formations that the Limbiko bauxite deposit was developed. The stratigraphic logs show the succession of formations. The parent rock is surmounted by an alteration crust. The petrographic study is based on the bauxitic and transitional zones characterized by ferruginous laterites. Both zones contain some ferriplantite. Mineralogical analysis shows the presence of gibbsite, goethite, alumogoethite, rutile and clay minerals. The geochemical study of the major elements shows that the more the contents of SiO<sub>2</sub>, Fe<sub>2</sub>O<sub>3</sub> decrease, the more the content of Al<sub>2</sub>O<sub>3</sub> increases and those of TiO<sub>2</sub>, Al<sub>2</sub>O<sub>3</sub> increase in the same direction. The PCA confirms the mineralogical results by classifying the samples into clay, bauxite and ferrite.展开更多
The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite ar...The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite are collected after intervals of 3 to 4 hours. Large bauxite processing industries producing 1 million tons of pure aluminium can have three grinding mills. Thus, the total number of samples to be tested in one day reaches a figure of 18 to 24. The sample of bauxite ore coming from the grinding mill is tested for its particle size and composition. For testing the composition, the bauxite ore sample is first prepared by fusing it with X-ray flux. Then the sample is sent for X-ray fluorescence analysis. Afterwards, the crucibles are washed in ultrasonic baths to be used for the next testing. The whole procedure takes about 2 - 3 hours. With a large number of samples reaching the laboratory, the chances of error in composition analysis increase. In this study, we have used a composite sampling methodology to reduce the number of samples reaching the laboratory without compromising their validity. The results of the average composition of fifteen samples were measured against composite samples. The mean of difference was calculated. The standard deviation and paired t-test values were evaluated against predetermined critical values obtained using a two-tailed test. It was found from the results that paired test-t values were much lower than the critical values thus validating the composition attained through composite sampling. The composite sampling approach not only reduced the number of samples but also the chemicals used in the laboratory. The objective of improved analytical protocol to reduce the number of samples reaching the laboratory was successfully achieved without compromising the quality of analytical results.展开更多
Results from research efforts over many years by the Highway Laboratory of Civil Engineering Department of Aristotle University of Thessaloniki(AUTH)and other academic or research institutions on behalf of"Alumin...Results from research efforts over many years by the Highway Laboratory of Civil Engineering Department of Aristotle University of Thessaloniki(AUTH)and other academic or research institutions on behalf of"Aluminium of Greece"have demonstrated the potential use of bauxite residue in the construction industry as bricks,in the ceramic industry,for restoring abandoned surface mines and road construction.This paper details the construction of a gravel road using bauxite residue on the road"St.Nikolas-Kiriaki"in the site of the"Aluminium of Greece".The final layer included the addition of bauxite aggregates to provide an additional road carrying capacity.The aim of the project was to construct a trafficable surface for trucks and other vehicles with adequate resistance to heavy traffic loads and external factors as changing climatic conditions or soil erosion due to the rain.The construction is the right balance between technically excellent result and economically feasible.The prospect of using bauxite residue for similar road construction,or in general road construction,remains open.展开更多
This study was focused to assess major and trace elements in bauxitic duricrusts from Ngaoundal and its surroundings in order to establish their mining interest. To this end, fieldworks, mineralogical and geochemical ...This study was focused to assess major and trace elements in bauxitic duricrusts from Ngaoundal and its surroundings in order to establish their mining interest. To this end, fieldworks, mineralogical and geochemical analyses were carried out. Four facies of duricrust were identified and characterized from the summit to the top of the slope of the Ngaoundal mountain: scoriaceous, pisolitic, nodular and massive. Mineralogical and geochemical analyses performed on 16 samples, revealed a significant concentration of Al<sub>2</sub>O<sub>3</sub> mainly in the scoriaceous facies (over 45% in grade), moderate in Fe<sub>2</sub>O<sub>3</sub> (averaging 23.69%) and SiO<sub>2</sub> (averaging 21.7%). Trace elements were generally low, excluding Cr (421 ppm on average), Zr (327 ppm on average and V (213 ppm on average). In addition, the limited quantities of alkalis (Na<sub>2</sub>O, K<sub>2</sub>O) and alkaline earths metals (MgO, CaO) coupled with the very high values of Chemical Index of Alteration (CIA) and Mineralogical Index of Alteration (MIA), (more than 99%) attest to the intense weathering of the studied materials. Allitization and monosiallitization constituted the crystallochemical phenomena that have led to the development of bauxitic minerals. More than 90% of gibbsite in scoriaceous facies, 52.21% - 76.01% of kaolinite in pisolitic facies and more than 40% of hematite in nodular facies were quantified. The relationships between the constitutive components indicated their interdependency during the bauxitization phenomenon. The mineralogical and geochemical properties highlighted the mining interest of the studied duricrusts to be valorized.展开更多
The effect of lime on the pre-desilication and digestion of gibbsitic bauxite in synthetic sodium aluminate liquor at different tem- peratures was investigated. The bauxite is comprised of gibbsite, aluminogoethite, h...The effect of lime on the pre-desilication and digestion of gibbsitic bauxite in synthetic sodium aluminate liquor at different tem- peratures was investigated. The bauxite is comprised of gibbsite, aluminogoethite, hematite, kaolin, quartz, and minor boehmite. Lime in- creases the desilication efficiency of the bauxite during the pre-desilication process by promoting the conversion of sodalite and cancrinite to hydrogamet. Desilication reactions during the digestion process promoted by lime result in the loss of A1203 entering the red mud, but the amount of aluminogoethite-to-hematite conversion promoted by lime leads to the increase of aluminogoethific A1203 entering the digested liquor. The alumina digestion rate at 245~C is higher than that at 145 C due to the more pronounced conversion of aluminogoethite to hema- tite. The soda consumption during the digestion process decreases due to lime addition, especially at higher temperatures.展开更多
Major and REE geochemistry and multi-fractal analysis of two types of bauxite(primary bauxite and accumulated bauxite) ores were studied in Pingguo bauxite orefield in western Guangxi,China.The results of geochemical ...Major and REE geochemistry and multi-fractal analysis of two types of bauxite(primary bauxite and accumulated bauxite) ores were studied in Pingguo bauxite orefield in western Guangxi,China.The results of geochemical data show that the accumulated bauxite has a feature of high Al_2O_3 whereas relative low Fe_2O_3 and SiO_2 contents compared to the primary bauxite.The similar chondrite-normalized rare earth element(REE) patterns illustrate that they have a cognate relationship.However,the negative Ce anomalies of primary bauxite and positive Ce anomalies of accumulated bauxite indicate that the ore-forming system changed from reducing environment to oxidation environment.The results of multi-fractal spectrum and parameters of Al_2O_3,Fe_2O_3 and SiO_2 between primary bauxite and accumulated bauxite show that the distinct multi-fractal spectrum parameters reflect the different grade distribution between accumulated and primary bauxite ores.Metallogenic process from primary bauxite to accumulated bauxite is accompanied by the loss of diffluent elements(e.g.,Si and S) and enrichment of stable elements(e.g.,Al and Fe) in the surface environment.Among the rest,the migration mechanism of iron during the evolutionary process from primary ore to accumulated ore can be described as combined leaching and chemical weathering action with participation of sulfur.展开更多
The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joi...The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joint damage factor,causing a large predicted exposure area with a high roof falling risk.This work adopted joint damage factor to derive a new UERA prediction model.The relationships between the UERA(S)and the span ratio(m),the density(k)and the diameter of fracture(d)were analysed by the new prediction model.The results showed that the exposed area S and the span ratio m have a U-shaped curve relationship.The S decreases with the increase of m and then increases when m is beyond 2.The exposed roof area S is in an inversely proportional power-law relationship with the fracture surface density k,and the curvature of the S-k relationship curve decreases when d=0.5 and k>7,and S is close to 0.There is a negative correlation between S and the fracture surface diameter d,the curvature of the S-d curve decreases with the increase of d and k,and the variation rate increases first and then decreases with the increase of d;when k=0.5 and d>9,S is close to 0.The predicted values of the UERA prediction model are 119.3,112.8,and 114.6 m2 with different joint damage parameters,which are slightly smaller than the actual critical exposure area of a roof(S=120 m2).The case study shows that the alternative prediction model is reasonable and acceptable and provides new theoretical support for the underground mining safety of sedimentary bauxite ore.展开更多
基金Project(40901217)supported by the National Natural Science Foundation of China
文摘Suitability evaluation plays an important role in land reclamation because the choice of evaluation methods affects the accuracy and objectivity of the suitability evaluation results. Furthermore, it influences the decision-making related to land reclamation. An improved method, which is called limit comprehensive conditions method, was developed after different suitability evaluation methods were studied. Based on this method, the reclaimed land of the Gaoqiao bauxite mining area was evaluated. The Gaoqiao mining area was divided into seven evaluation units that were evaluated respectively by selecting evaluation factors and establishing grade standards. The results show that the proposed method is more applicable and easier to handle. Moreover, its evaluation results are more scientific compared with the traditional evaluation methods. The improved method can be beneficial to the rapid monitoring and the effective management of reclaimed land in the opencast mine area.
文摘The Tan Rai Bauxite Project, which exploits a large bauxite mine in Lam Dong province, Vietnam has been in operation since 2012. In addition to the economic efficiency of the project, bauxite mining and processing uses a large area arable land and affect the regional environment. Remote sensing technology is increasingly widely used in many purposes in monitoring the changes of environment and resources, including land use change with high accuracy, giving managers more information to monitor the exploitation and use process of land resource. This study used a Change Vector Analysis (CVA) method of analysis on various remote sensing data sources to monitor the process of land exploitation and restoration of the Tan Rai Bauxite project. High-resolution remote sensing images were used as diverse as SPOT-5, VNREDSat-1, Google Earth from 2013 to 2019 to demonstrate the ability of the MCVA method to combine many other types of remote sensing images together. The results of fluctuation analysis were validated by 200 random points in the study area, and the accuracy of result is more than 90%. The results of land use change statistics were also compared with the annual data of Tan Rai Bauxite Factory. From this study, it can be concluded that the MCVA analysis method can quickly detect land use change areas and can combine many different image sources with a high accuracy. In addition, it also provides statistics of mining areas and restored areas, thereby assisting managers in monitoring the operation of the mine.
文摘Two non-destructive analytical techniques (gamma spectrometer and X-ray diffractometer) were employed in the analysis of bauxite and rutile ore and their vicinity soil and control sourced within the Kanam and Wase mineral exploration sites. The activity concentrations of natural radionuclides <sup>238</sup>U, <sup>232</sup>Th, and <sup>40</sup>K in the soil samples received from bauxite and rutile mineral mining vicinities revealed high concentrations of <sup>238</sup>U, <sup>232</sup>Th, and <sup>40</sup>K compared to the control soil samples sourced 500 m away from the mineral exploration vicinities. Radiological detriments RLI, AUI, Hin and Hex unveiled values exceeding the radiation standard concentration (>1) for soil. X-ray diffraction characterization of bauxite ore revealed the interlocking minerals of Bauxite (18)%, Albite (11)%, Garnet (15)%, Illite (6)% and Muscovite (43)% in various proportions obtained within the 2θ range (9.18 to 64.4) and a peak value (intensity, cps) of 3400. Pure bauxite percentage in the ore meets metallurgical grade (15 - 25)%. X-ray diffraction of rutile ore revealed the minerals of rutile (40)%, quartz (21.4)%, ilmenite (27)% and garnet (11.8)% found within the 2θ range (27.5 to 35.6) and a peak value intensity of 31.1 - 100.0 cps also meeting the metallurgical grade of 15% - 25%. The major environmental concern associated with the mineral-sands industry is the radiation hazards, pollution of ground-water sources from heavy metals, mineral transport with heavy equipment’s, dredging operations in fragile coastal area and clearing of vegetation.
基金Supported by the PetroChina Science and Technology Innovation Fund Project(2021DQ02-1003)Basic Research Project for Central Universities(2022JCCXDC02).
文摘Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.
文摘Jajarm's bauxite deposits are mainly diasporic, and they have a low mass ratio of Al2O3/SiO2. It is necessary to increase the run-of-mine mass ratio before feeding the material to the Bayer process. Chemical analysis indicated that the low-grade bauxite sample from Jajarm contained 43.9wt% Al2O3 and 13.35wt% SiO2, resulting in a mass ratio of 3.29. According to mineralogical studies, the presence of aluminosilicate minerals such as kaolinite, illite, and quartz was the main reason for the decrease of the mass ratio. Microscopic observations revealed that, with the size reduction from -1000+710 to -38 μm, the liberation degree of diaspore increased from 10% to 60%, and that of aluminosilicates increased from 20% to 85%. Heavy liquids with the densities of 2.8, 3.0, 3.2, and 3.4 g/cm3 were used to evaluate the heavy media separation in three sizes, i.e., -3350+710, -710+212, and -212+125 μm. Laboratory studies confirm that the density of 3.2 g/cm3 can produce the concentrates (in sunk fractions) with recoveries of 89.09%, 91.24%, and 84.68% with the Al2O3/SiO2 mass ratios of 5.03, 5.16, and 5.15 for the -3350+710, -710+212, and -212+ 125 μ m sizes, respectively.
基金This work was financially supported by the National Natural Science Foundation of China(Nos.U1812402,51664005,and 51774102)Talents of Guizhou Science and Technology Cooperation Platform(Talent Team Giant[2015]4005,Platform Talent[2017]5788,[2017]5626,and KY(2015)334).
文摘To enable the utilization of low-grade and high-sulfur bauxite, the suspension calcination was used to remove the sulfur and the activate silica minerals, and the calcinated bauxite was subjected to a desilication process in Na OH solution under atmospheric pressure. The desulfurization and desilication properties and mineralogical evolution were studied by X-ray diffraction, thermogravimetry–differential thermal analysis, scanning electron microscopy, and FactSage methods. The results demonstrate that the suspension calcination method is efficient for sulfur removal: 84.21% of S was removed after calcination at 1000°C for 2 min. During the calcination process, diaspore and pyrite were transferred to α-Al2O3, magnetite, and hematite. The phase transformation of pyrite follows the order FeS2 → Fe3O4 → Fe2O3, and the iron oxides and silica were converted into iron silicate. In the alkali-soluble desilication process, the optimum condition was an alkali solution concentration of 110 g/L, a reaction time of 20 min, and a reaction temperature of 95°C. The corresponding desilication ratio and alumina loss ratio were 44.9% and 2.4%, respectively, and the alumina-to-silica mass ratio of the concentrate was 7.9. The Al2O3·2SiO2, SiO2, and Al2O3 formed during the calcination process could react with Na OH solution, and their activity decreased in the order of Al2O3·2 SiO2, SiO2, and Al2O3.
文摘The complex of mineralogical methods was developed to obtain reliable data about mineral composition of bauxites and new crystal-chemical information (the whole cycle of used chemical elements, methods of residue utilization, position of residue tails in dump pits). Natural and technogenic structures were studied as sources of necessary chemical elements and useful properties.
文摘Assessing the potential uses as industrial mineral, bauxite from Débélé, Guinea, has been characterised by chemical and mineralogical analyses, the determination of the amorphous content, the rate of portlandite consumption in an aqueous solution, the strength activity index, and the thermal behaviour up to 1200<span style="white-space:nowrap;">°</span>C. It was evidenced that the raw sample is gibbsite-rich type bauxite with about 45.06 wt% of alumina, 23.80 wt% of iron oxide, and 1.74 wt% of silica. It meets the chemical composition required for bauxites used for refractory cement. During heating, the raw bauxite undergoes high densification with low linear shrinkage, motivating a potential use in dense ceramic compositions with high thermal stability. Also, the heating at only 600<span style="white-space:nowrap;">°</span>C gives a significant pozzolanic activity in combination with Portland cement. The correlation between the pozzolanicity, the amorphous phase content, and the specific surface area indicated that the raw and the calcined materials present an interesting reactivity for using them in alternative cement formulations.
文摘China Power Investment Group(CPI),one of the five power generation groups in China signed an Aluminum Development Project Concession Agreement with the government of Guinea on Sep.6,symbolizing a substantial step in developing its Guinean aluminum base
文摘With the acceleration of industrialization of extraction of alumina from high aluminum fly ash technology, the West Inner Mongolia coalfield is expected to become the largest bauxite mine with the largest aluminum reserves in China.
文摘According to Guangxi General Institute of Geological Prospecting,after 3 years of hard work,prospecting team has discovered extra large bauxite mines with resources of 120 mil- lion tons in Youjiang area in Guangxi. It is said that the newly-found extra large baux- ite mines are situated in the city of Congzuo. The ore belt lays generally northeast with
文摘On July 26,Guangxi Huaying bauxite mine was put into production upon its completion. With supportive function,the mine facilitates the 1.6-million-ton/year alumina project of Guangxi Huaying with annual capacity of 4 million tons of ores.The open-pit
文摘The bauxitic region of Sumbi and its surroundings in Central Kongo (DR Congo) is located in an area corresponding to “bands” of basic rocks made up of microdolerites, basalts and andesites. The problem of this study is linked to the similarity of the phenomena that generated the depositional process of these ferruginous and aluminous formations. The aim of this article is to carry out a chemical and petrographic study of samples of bauxitic materials from the Mayedo and Kinzoki regions, with a view to their possible recovery. To this end, the chemical and petrographic analysis of the weathering formations outcropping in the study area was carried out using X-ray fluorescence and thin section methods. The latter revealed that two lithologies were detected in the healthy rocks: basalts with a mineralogical assemblage of plagioclase crystals, pyroxene microcrystals and oxide opaques;and dolerites represented by plagioclase crystals, pyroxenes and a few quartz crystals. X-ray fluorescence revealed high levels of Al<sub>2</sub>O<sub>3</sub> (32.69%) in the Mayedo zone (MHb1). This visibly gibbsite-rich level corresponds to the zone of friable, homogeneous bauxite with a massive, blood-red texture, with an estimated gibbsite percentage of 55.50. The percentage of Fe<sub>2</sub>O<sub>3</sub> is high in these zones at 42.77%, hence the dark red colour, reflecting a strong zone of ferruginasation. This horizon contains a high concentration of hematite and goethite minerals. Highly variable SiO<sub>2</sub> contents ranging from 13.48% to 40.82%. These variations are essentially due to the dissolution of silica by leaching and resilification.
文摘The increasing demand for Aluminium pushes the miners to multiply the research in order to answer this demand. The objective of this work is to characterize the bauxitic deposit of Limbiko. The methodology consists in collecting samples, and establishing stratigraphic logs, sections and geological maps. The analyses were carried out in the laboratory of the Company des Bauxites de Guinea. Statistical methods were used to process the geochemical data. The study area is characterized by sedimentary formations of the Devonian, in which the dolerites of the Mesozoic were injected. It is on these Devonian and Mesozoic formations that the Limbiko bauxite deposit was developed. The stratigraphic logs show the succession of formations. The parent rock is surmounted by an alteration crust. The petrographic study is based on the bauxitic and transitional zones characterized by ferruginous laterites. Both zones contain some ferriplantite. Mineralogical analysis shows the presence of gibbsite, goethite, alumogoethite, rutile and clay minerals. The geochemical study of the major elements shows that the more the contents of SiO<sub>2</sub>, Fe<sub>2</sub>O<sub>3</sub> decrease, the more the content of Al<sub>2</sub>O<sub>3</sub> increases and those of TiO<sub>2</sub>, Al<sub>2</sub>O<sub>3</sub> increase in the same direction. The PCA confirms the mineralogical results by classifying the samples into clay, bauxite and ferrite.
文摘The laboratories in the bauxite processing industry are always under a heavy workload of sample collection, analysis, and compilation of the results. After size reduction from grinding mills, the samples of bauxite are collected after intervals of 3 to 4 hours. Large bauxite processing industries producing 1 million tons of pure aluminium can have three grinding mills. Thus, the total number of samples to be tested in one day reaches a figure of 18 to 24. The sample of bauxite ore coming from the grinding mill is tested for its particle size and composition. For testing the composition, the bauxite ore sample is first prepared by fusing it with X-ray flux. Then the sample is sent for X-ray fluorescence analysis. Afterwards, the crucibles are washed in ultrasonic baths to be used for the next testing. The whole procedure takes about 2 - 3 hours. With a large number of samples reaching the laboratory, the chances of error in composition analysis increase. In this study, we have used a composite sampling methodology to reduce the number of samples reaching the laboratory without compromising their validity. The results of the average composition of fifteen samples were measured against composite samples. The mean of difference was calculated. The standard deviation and paired t-test values were evaluated against predetermined critical values obtained using a two-tailed test. It was found from the results that paired test-t values were much lower than the critical values thus validating the composition attained through composite sampling. The composite sampling approach not only reduced the number of samples but also the chemicals used in the laboratory. The objective of improved analytical protocol to reduce the number of samples reaching the laboratory was successfully achieved without compromising the quality of analytical results.
文摘Results from research efforts over many years by the Highway Laboratory of Civil Engineering Department of Aristotle University of Thessaloniki(AUTH)and other academic or research institutions on behalf of"Aluminium of Greece"have demonstrated the potential use of bauxite residue in the construction industry as bricks,in the ceramic industry,for restoring abandoned surface mines and road construction.This paper details the construction of a gravel road using bauxite residue on the road"St.Nikolas-Kiriaki"in the site of the"Aluminium of Greece".The final layer included the addition of bauxite aggregates to provide an additional road carrying capacity.The aim of the project was to construct a trafficable surface for trucks and other vehicles with adequate resistance to heavy traffic loads and external factors as changing climatic conditions or soil erosion due to the rain.The construction is the right balance between technically excellent result and economically feasible.The prospect of using bauxite residue for similar road construction,or in general road construction,remains open.
文摘This study was focused to assess major and trace elements in bauxitic duricrusts from Ngaoundal and its surroundings in order to establish their mining interest. To this end, fieldworks, mineralogical and geochemical analyses were carried out. Four facies of duricrust were identified and characterized from the summit to the top of the slope of the Ngaoundal mountain: scoriaceous, pisolitic, nodular and massive. Mineralogical and geochemical analyses performed on 16 samples, revealed a significant concentration of Al<sub>2</sub>O<sub>3</sub> mainly in the scoriaceous facies (over 45% in grade), moderate in Fe<sub>2</sub>O<sub>3</sub> (averaging 23.69%) and SiO<sub>2</sub> (averaging 21.7%). Trace elements were generally low, excluding Cr (421 ppm on average), Zr (327 ppm on average and V (213 ppm on average). In addition, the limited quantities of alkalis (Na<sub>2</sub>O, K<sub>2</sub>O) and alkaline earths metals (MgO, CaO) coupled with the very high values of Chemical Index of Alteration (CIA) and Mineralogical Index of Alteration (MIA), (more than 99%) attest to the intense weathering of the studied materials. Allitization and monosiallitization constituted the crystallochemical phenomena that have led to the development of bauxitic minerals. More than 90% of gibbsite in scoriaceous facies, 52.21% - 76.01% of kaolinite in pisolitic facies and more than 40% of hematite in nodular facies were quantified. The relationships between the constitutive components indicated their interdependency during the bauxitization phenomenon. The mineralogical and geochemical properties highlighted the mining interest of the studied duricrusts to be valorized.
基金the National Natural Science Foundation of China(Nos.51104041 and 51174054)
文摘The effect of lime on the pre-desilication and digestion of gibbsitic bauxite in synthetic sodium aluminate liquor at different tem- peratures was investigated. The bauxite is comprised of gibbsite, aluminogoethite, hematite, kaolin, quartz, and minor boehmite. Lime in- creases the desilication efficiency of the bauxite during the pre-desilication process by promoting the conversion of sodalite and cancrinite to hydrogamet. Desilication reactions during the digestion process promoted by lime result in the loss of A1203 entering the red mud, but the amount of aluminogoethite-to-hematite conversion promoted by lime leads to the increase of aluminogoethific A1203 entering the digested liquor. The alumina digestion rate at 245~C is higher than that at 145 C due to the more pronounced conversion of aluminogoethite to hema- tite. The soda consumption during the digestion process decreases due to lime addition, especially at higher temperatures.
基金Project(GX2007CAQB01)supported by the Key Research Project of Aluminum Corporation of China LimitedProject(41502067)supported by the National Natural Science Foundation of China
文摘Major and REE geochemistry and multi-fractal analysis of two types of bauxite(primary bauxite and accumulated bauxite) ores were studied in Pingguo bauxite orefield in western Guangxi,China.The results of geochemical data show that the accumulated bauxite has a feature of high Al_2O_3 whereas relative low Fe_2O_3 and SiO_2 contents compared to the primary bauxite.The similar chondrite-normalized rare earth element(REE) patterns illustrate that they have a cognate relationship.However,the negative Ce anomalies of primary bauxite and positive Ce anomalies of accumulated bauxite indicate that the ore-forming system changed from reducing environment to oxidation environment.The results of multi-fractal spectrum and parameters of Al_2O_3,Fe_2O_3 and SiO_2 between primary bauxite and accumulated bauxite show that the distinct multi-fractal spectrum parameters reflect the different grade distribution between accumulated and primary bauxite ores.Metallogenic process from primary bauxite to accumulated bauxite is accompanied by the loss of diffluent elements(e.g.,Si and S) and enrichment of stable elements(e.g.,Al and Fe) in the surface environment.Among the rest,the migration mechanism of iron during the evolutionary process from primary ore to accumulated ore can be described as combined leaching and chemical weathering action with participation of sulfur.
基金This work is supported by the National Natural Science Foundation of China(51974135,51704094)the National Key Research and Development Program of China(2016YFC0600802).
文摘The ultimately exposed roof area(UERA)of goaf is crucial to the safety and economics of underground mining.The prediction models do not consider the mechanical weakness of rock mass and ignore the influence of the joint damage factor,causing a large predicted exposure area with a high roof falling risk.This work adopted joint damage factor to derive a new UERA prediction model.The relationships between the UERA(S)and the span ratio(m),the density(k)and the diameter of fracture(d)were analysed by the new prediction model.The results showed that the exposed area S and the span ratio m have a U-shaped curve relationship.The S decreases with the increase of m and then increases when m is beyond 2.The exposed roof area S is in an inversely proportional power-law relationship with the fracture surface density k,and the curvature of the S-k relationship curve decreases when d=0.5 and k>7,and S is close to 0.There is a negative correlation between S and the fracture surface diameter d,the curvature of the S-d curve decreases with the increase of d and k,and the variation rate increases first and then decreases with the increase of d;when k=0.5 and d>9,S is close to 0.The predicted values of the UERA prediction model are 119.3,112.8,and 114.6 m2 with different joint damage parameters,which are slightly smaller than the actual critical exposure area of a roof(S=120 m2).The case study shows that the alternative prediction model is reasonable and acceptable and provides new theoretical support for the underground mining safety of sedimentary bauxite ore.