Optimization of the beam quality in ionization injection by a tailoring gas profile

A new scheme is proposed to improve the electron beam quality of ionization-induced injection by tailoring gas profile in laser wakefield acceleration.Two-dimensional particle-in-cell simulations show that the ionization-induced injection mainly occurs in high-density stage and automatically truncates in low-density stage due to the decrease of the wakefield potential difference.The beam loading can be compensated by the elongated beam resulting from the density transition stage.The beam quality can be improved by shorter injection distance and beam loading effect.A quasi-monoenergetic electron beam with a central energy of 258 MeV and an energy spread of 5.1%is obtained under certain laser-plasma conditions.

Study of the beam loading effect in the CSNS/RCS

The China Spallation Neutron Source/Rapid Cycling Synchrotron （CSNS/RCS） accelerates a high-intensity proton beam from 80 MeV to 1.6 GeV. Since the beam current and beam power is high, the beam loading is a severe problem for the stability of the circulating beam in the RCS. To study the beam loading effect in the CSNS/RCS theoretically, the RLC circuit model of the rf cavity, the method of Fast Fourier Transform and the method of Laplace transform have been employed to obtain the impedance of the rf system, the beam spectrum and the beam-induced voltage, respectively. Based on these physical models, the beam dynamics equations have been revised and a beam loading model has been constructed in the simulation code ORIENT. By using the code, the beam loading effect on the rf system of the CSNS/RCS has been investigated. Some simulation results have been obtained and conclusions have been drawn.

Physical design of a 10 MeV LINAC for polymer radiation processing

In China, polymer radiation processing has become one of the most important processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it’s much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.