Mobility-Aware Adaptive Beam Tracking for Vehicles in Mm Wave Communication Networks

The millimeter wave(mm Wave)is a potential solution for high data rate communication due to its availability of large bandwidth.However,it is challenging to perform beam tracking in vehicular mm Wave communication systems due to high mobility and narrow beams.In this paper,an adaptive beam tracking algorithm is proposed to improve the network throughput performance while reducing the training signal overhead.In particular,based on the mobility prediction at base station(BS),a novel frame structure with dynamic bundled timeslot is designed.Moreover,an actor-critic reinforcement learning based algorithm is proposed to obtain the joint optimization of both beam width and the number of bundled timeslots,which makes the beam tracking adapt to the changing environment.Simulation results demonstrate that,compared with the traditional full scan and Kalman filter based beam tracking algorithms,our proposed algorithm can improve the time-averaged throughput by 11.34%and 24.86%respectively.With the newly designed frame structure,it also outperforms beam tracking with conventional frame structure,especially in scenarios with large range of vehicle speeds.

Cubature Kalman Filter Based Millimeter Wave Beam Tracking for OTFS Systems

In this paper,a Millimeter wave(mmWave)beam tracking problem is studied in orthogonal time frequency space(OTFS)systems.Considering the nonlinearity of beamforming and the constraints of existing Kalman-filtering based beam tracking schemes,we propose a novel Cubature Kalman Filter(CKF)framework tracking the channel state information(CSI)to manage the challenge of highspeed channel variation in single-user moving scene for OTFS systems.Aiming for low complexity for mobile settings,this paper trains only one beam pair to track a path to maintain the reliable communication link in the analog beamforming architecture.Simulation results show that our proposed method has better tracking performance to improve the accuracy of the estimated beam angle compared with prior work.

Multi-User MmWave Beam Tracking via Multi-Agent Deep Q-Learning

Beamforming is significant for millimeter wave multi-user massive multi-input multi-output systems.In the meanwhile,the overhead cost of channel state information and beam training is considerable,especially in dynamic environments.To reduce the overhead cost,we propose a multi-user beam tracking algorithm using a distributed deep Q-learning method.With online learning of users’moving trajectories,the proposed algorithm learns to scan a beam subspace to maximize the average effective sum rate.Considering practical implementation,we model the continuous beam tracking problem as a non-Markov decision process and thus develop a simplified training scheme of deep Q-learning to reduce the training complexity.Furthermore,we propose a scalable state-action-reward design for scenarios with different users and antenna numbers.Simulation results verify the effectiveness of the designed method.

A robust beam tracking scheme for millimeter wave HetNets

Millimeter Wave(mmWave)communication has been widely acknowledged as an attractive solution to address high-speed transmission of massive data in 5G and beyond 5G systems due to the promising spectrum availability.However,mmWave signals are highly susceptible to blockage and may suffer from rapidly changing channels.Thus,directional/beam tracking becomes imperative yet essential for robust mmWave communications.To address this challenge,we propose a robust beam tracking scheme for mmWave Heterogeneous Networks(HetNets)with multi-connectivity.Different from most existing schemes,the proposed beam tracking scheme is effective for outage events.We first discuss theμWave-assisted beam tracking procedure with and without candidate beams,and then analyze the inherent correlation between mmWave link quality and the operating beamwidth and occlusion range to derive the optimal beamwidth.Theoretical and numerical results show that the proposed beam tracking scheme can improve the robustness of mmWave communications while guaranteeing the rate performance.

Beam Training and Tracking in mmWave Communication:A Survey

Communicating on millimeter wave(mmWave)bands is ushering in a new epoch of mobile communication which provides the availability of 10 Gbps high data rate transmission.However,mmWave links are easily prone to short transmission range communication because of the serious free space path loss and the blockage by obstacles.To overcome these challenges,highly directional beams are exploited to achieve robust links by hybrid beamforming.Accurately aligning the transmitter and receiver beams,i.e.beam training,is vitally important to high data rate transmission.However,it may cause huge overhead which has negative effects on initial access,handover,and tracking.Besides,the mobility patterns of users are complicated and dynamic,which may cause tracking error and large tracking latency.An efficient beam tracking method has a positive effect on sustaining robust links.This article provides an overview of the beam training and tracking technologies on mmWave bands and reveals the insights for future research in the 6th Generation(6G)mobile network.Especially,some open research problems are proposed to realize fast,accurate,and robust beam training and tracking.We hope that this survey provides guidelines for the researchers in the area of mmWave communications.

Beam tracking method based on reconfigurable intelligent surface for obstructed communication

This paper proposes a new reconfigurable intelligent surface based three-dimensional beam tracking method to solve the beam tracking problems for the unmanned aerial vehicle with obstacles in communication channels.The proposed beam tracking method can not only regulate the reconfigurable intelligent surfaces to achieve the beam tracking of the obstructed communications,but also optimize the transmission efficiency of the communication.Firstly,a reconfigurable intelligent surface is proposed,which can correlate the transmission signals by adjusting the phaseshift matrix.Meanwhile,a new communication channel is constructed according to the reconfigurable intelligent surface,which consists of two parts.The first one is the channel between the unmanned aerial vehicle and the reconfigurable intelligent surface,the other is the channel between the reconfigurable intelligent surface and the ground base station.Note that the transmission performance of the communications can be optimized by adjusting the phase shift of each uniform linear array on the reconfigurable intelligent surface.Then,a new beam tracking method for the unmanned aerial vehicle with obstructed communications is proposed on the basis of the reconfigurable intelligent surface.By proposing the mixed genetic algorithm,the estimation accuracy of the azimuth and elevation angles is improved to enhance the performance of the beam tracking.Finally,the simulations are provided to verify the effectiveness of the proposed three-dimensional beam tracking method with reconfigurable intelligent surface.

UAV Communications with Millimeter-Wave Beamforming:Potentials,Scenarios,and Challenges

Unmanned aerial vehicle(UAV)has been widely used in many fields and is arousing global attention.As the resolution of the equipped sensors in the UAV becomes higher and the tasks become more complicated,much higher data rate and longer communication range are required in the foreseeable future.As the millimeter-wave(mm Wave)band can provide more abundant frequency resources than the microwave band,much higher achievable rate can be guaranteed to support UAV services such as video surveillance,hotspot coverage,and emergency communications,etc.The flexible mm Wave beamforming can be used to overcome the high path loss caused by the long propagation distance.In this paper,we study three typical application scenarios for mm Wave-UAV communications,namely communication terminal,access point,and backbone link.We present several key enabling techniques for UAV communications,including beam tracking,multi-beam forming,joint Tx/Rx beam alignment,and full-duplex relay techniques.We show the coupling relation between mm Wave beamforming and UAV positioning for mm Wave-UAV communications.Lastly,we summarize the challenges and research directions of mm Wave-UAV communications in detail.

An online fast multi-track locating algorithm for high-resolution single-event effect test platform

To improve the efficiency and accuracy of single-event effect(SEE)research at the Heavy Ion Research Facility at Lanzhou,Hi’Beam-SEE must precisely localize the position at which each heavy ion hitting the integrated circuit(IC)causes SEE.In this study,we propose a fast multi-track location(FML)method based on deep learning to locate the position of each particle track with high speed and accuracy.FML can process a vast amount of data supplied by Hi’Beam-SEE online,revealing sensitive areas in real time.FML is a slot-based object-centric encoder-decoder structure in which each slot can learn the location information of each track in the image.To make the method more accurate for real data,we designed an algorithm to generate a simulated dataset with a distribution similar to that of the real data,which was then used to train the model.Extensive comparison experiments demonstrated that the FML method,which has the best performance on simulated datasets,has high accuracy on real datasets as well.In particular,FML can reach 238 fps and a standard error of 1.6237μm.This study discusses the design and performance of FML.

Optical SDMA for applying compressive sensing in WSN

In order to apply compressive sensing in wireless sensor network, inside the nodes cluster classified by the spatial correlation, we propose that a cluster head adopts free space optical communication with space division multiple access, and a sensor node uses a modulating retro-reflector for communication. Thus while a random sampling matrix is used to guide the establishment of links between head cluster and sensor nodes, the random linear projection is accomplished. To establish multiple links at the same time, an optical space division multiple access antenna is designed. It works in fixed beams switching mode and consists of optic lens with a large field of view（FOV）, fiber array on the focal plane which is used to realize virtual channels segmentation, direction of arrival sensor, optical matrix switch and controller. Based on the angles of nodes＇ laser beams, by dynamically changing the route, optical matrix switch actualizes the multi-beam full duplex tracking receiving and transmission. Due to the structure of fiber array, there will be several fade zones both in the focal plane and in lens＇ FOV. In order to lower the impact of fade zones and harmonize multibeam, a fiber array adjustment is designed. By theoretical, simulated and experimental study, the antenna＇s qualitative feasibility is validated.