Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea ...Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea floor off the Dongfang coast and internal structures of a typical dune were interpreted to evaluate storm influences on individual dunes and the dune field. Results indicated that flow forcings and related bedload transport were both strengthened significantly due to Typhoon Ketsana. The measurements and modeling results, which mainly included three different stages, presented noticeable phasic variation. The three stages were dominated by tidal current (Period I), tidal current combined with wind-induced waves (Period II), and swells combined with tidal current and seaward flows (Period III). This phasic varia- tion could be a common trait of hydrodynamics due to typhoons moving westwardly to the south of Hainan Island and Beibu Gulf in South China Sea. Results indicated that the maximum bedioad transport rate for every burst in Period III was almost 100 times larger than that in Period I and was ten times larger than that in Period II. However, the short-term increase in bedload transport induced by storms like Ketsana did not change the long-term evolution of dune morphology. Evidence was given by the internal structures of a typical dune, which revealed renewed modification under subsequent moderate conditions after storm ero- sion. Instead, storms may influence at different scales and regional allocation of sand dunes in some large areas because changes of the sea floor in large scales can hardly be recovered. More surveys during and after storm passage are also needed to document the level of positive contribution to forward migration.展开更多
The paper presents an investigation of injection effects on the bedload transport rate. According to dimensional analysis, two dimensionless groups, an Einstein's parameter group and a modified densimetric Froude num...The paper presents an investigation of injection effects on the bedload transport rate. According to dimensional analysis, two dimensionless groups, an Einstein's parameter group and a modified densimetric Froude number group, were chosen to examine how injection affects the bedload transport rate. Experimental studies were conducted in an open-channel flume with an upward seepage zone. The sediment particles used for the test were 0.9 mm in diameter. The experimental results show that an increase in the injection velocity causes a reduction in the shear velocity excess, which is defined as the difference between the shear and critical shear velocities, leading to a reduction in the bedload transport rate. The equation for predicting the bedload transport rate in the presence of upward seepage was derived empirically. The proposed prediction method is suitable for engineering practice, since it only requires the undisturbed flow condition, properties of sediment particles, and the injection velocity.展开更多
This paper studies the flow structure and the bedload transport regime in backwater flows, to provide a theoretical support for solving the sediment transport and bed scour problems in rivers or reservoirs with backwa...This paper studies the flow structure and the bedload transport regime in backwater flows, to provide a theoretical support for solving the sediment transport and bed scour problems in rivers or reservoirs with backwater. The bedload transport rates under different conditions are analyzed first on the basis of theoretical analysis, measurement comparison and flume experiment, and it is pointed out that the existing formulas for the bedload transport rate are not applicable for the bedload transport rate in backwater flows. Next, the flow structure in a non-uniform flow is observed by flume experiments, and by introducing the backwater degree index, the quantitative relation between the relative bed shear stress and the backwater degree is obtained. Finally, the formula for the bedload transport rate applicable for the reservoir channel segment with backwater flows is obtained through measurements and flume experiments.展开更多
A MIDAS-400 customized data acquisi- tion system has been used for the high-resolution sediment dynamic measurements over the Dafeng intertidal flats of northern Jiangsu during 6 tidal cy- cles from July 3 to July 10,...A MIDAS-400 customized data acquisi- tion system has been used for the high-resolution sediment dynamic measurements over the Dafeng intertidal flats of northern Jiangsu during 6 tidal cy- cles from July 3 to July 10, 2003. The bed shear stress and bedload transport rates, in response to wave-current interactions, are calculated, which in- dicate that wind waves enhance the bottom shear stress and bedload transport rates. At the station for measurements, bedload transport was directed to seaward, with a sediment discharge of 30—150 kg·m?1 per tidal cycle. The surficial sediment samples were collected from a grid with 10 m spatial intervals over a rectangle 2×104 m2 experimental area, near the MIDAS-400 during the spring tide of July 4, 2003, and the neap tide of July 9, 2003. In addition, leveling survey was undertaken to obtain the detailed topog- raphy of the sampling area. Grain-size trend analysis of the sediment samples shows that the bedload transport patterns are complex, mainly controlled by the hydrodynamics and local geomorphology (e.g. tidal creeks) over the intertidal flats. Furthermore, the grain-size trends pattern during the neap tide rather than during the spring tide is consistent with the cal- culated bedload transport, and the grain-size trend vectors for the spring tide are larger than those forthe neap tide, indicating that the sampling thickness of surficial sediment during the neap tide may contain the information on the geomorphological evolution (or sediment deposition/erosion) from the spring to the neap tide.展开更多
基金A CAS(Chinese Academy of Sciences)and CNOOC(China National Offshore Oil Corporation)collaborative research project
文摘Bedload sediment transport was estimated by the SEDTRANS96 model based on three-day hydrodynamics data obtained off the Dongfang coast in the Beibu Gulf during Typhoon Ketsana in September 2009. Bed- forms on the sea floor off the Dongfang coast and internal structures of a typical dune were interpreted to evaluate storm influences on individual dunes and the dune field. Results indicated that flow forcings and related bedload transport were both strengthened significantly due to Typhoon Ketsana. The measurements and modeling results, which mainly included three different stages, presented noticeable phasic variation. The three stages were dominated by tidal current (Period I), tidal current combined with wind-induced waves (Period II), and swells combined with tidal current and seaward flows (Period III). This phasic varia- tion could be a common trait of hydrodynamics due to typhoons moving westwardly to the south of Hainan Island and Beibu Gulf in South China Sea. Results indicated that the maximum bedioad transport rate for every burst in Period III was almost 100 times larger than that in Period I and was ten times larger than that in Period II. However, the short-term increase in bedload transport induced by storms like Ketsana did not change the long-term evolution of dune morphology. Evidence was given by the internal structures of a typical dune, which revealed renewed modification under subsequent moderate conditions after storm ero- sion. Instead, storms may influence at different scales and regional allocation of sand dunes in some large areas because changes of the sea floor in large scales can hardly be recovered. More surveys during and after storm passage are also needed to document the level of positive contribution to forward migration.
文摘The paper presents an investigation of injection effects on the bedload transport rate. According to dimensional analysis, two dimensionless groups, an Einstein's parameter group and a modified densimetric Froude number group, were chosen to examine how injection affects the bedload transport rate. Experimental studies were conducted in an open-channel flume with an upward seepage zone. The sediment particles used for the test were 0.9 mm in diameter. The experimental results show that an increase in the injection velocity causes a reduction in the shear velocity excess, which is defined as the difference between the shear and critical shear velocities, leading to a reduction in the bedload transport rate. The equation for predicting the bedload transport rate in the presence of upward seepage was derived empirically. The proposed prediction method is suitable for engineering practice, since it only requires the undisturbed flow condition, properties of sediment particles, and the injection velocity.
基金supported by the National Natural Science Foun-dation of China(Grant Nos.51339001,51479009)
文摘This paper studies the flow structure and the bedload transport regime in backwater flows, to provide a theoretical support for solving the sediment transport and bed scour problems in rivers or reservoirs with backwater. The bedload transport rates under different conditions are analyzed first on the basis of theoretical analysis, measurement comparison and flume experiment, and it is pointed out that the existing formulas for the bedload transport rate are not applicable for the bedload transport rate in backwater flows. Next, the flow structure in a non-uniform flow is observed by flume experiments, and by introducing the backwater degree index, the quantitative relation between the relative bed shear stress and the backwater degree is obtained. Finally, the formula for the bedload transport rate applicable for the reservoir channel segment with backwater flows is obtained through measurements and flume experiments.
基金The study was supported financially by the National Natural Science Foundation of China (Grant Nos. 40206006 and 40231010).
文摘A MIDAS-400 customized data acquisi- tion system has been used for the high-resolution sediment dynamic measurements over the Dafeng intertidal flats of northern Jiangsu during 6 tidal cy- cles from July 3 to July 10, 2003. The bed shear stress and bedload transport rates, in response to wave-current interactions, are calculated, which in- dicate that wind waves enhance the bottom shear stress and bedload transport rates. At the station for measurements, bedload transport was directed to seaward, with a sediment discharge of 30—150 kg·m?1 per tidal cycle. The surficial sediment samples were collected from a grid with 10 m spatial intervals over a rectangle 2×104 m2 experimental area, near the MIDAS-400 during the spring tide of July 4, 2003, and the neap tide of July 9, 2003. In addition, leveling survey was undertaken to obtain the detailed topog- raphy of the sampling area. Grain-size trend analysis of the sediment samples shows that the bedload transport patterns are complex, mainly controlled by the hydrodynamics and local geomorphology (e.g. tidal creeks) over the intertidal flats. Furthermore, the grain-size trends pattern during the neap tide rather than during the spring tide is consistent with the cal- culated bedload transport, and the grain-size trend vectors for the spring tide are larger than those forthe neap tide, indicating that the sampling thickness of surficial sediment during the neap tide may contain the information on the geomorphological evolution (or sediment deposition/erosion) from the spring to the neap tide.