Bedrock outcropping in the accumulation zone of the largest glacier in Mexico(Glaciar Norte of Citlaltépetl),as evidence of a possible accelerated extinction

The highest volcano in Mexico,at the same time the third largest mountain in North America(Citlaltépetl,5610 m a.s.l.),is home to the largest glacier in the country.Because of the extinction of the Popocatépetl glacier(5500 m a.s.l.)caused by eruptive activity,and the almost disappearance of the Iztaccíhuatl glaciers(5220 m a.s.l.)due to the lower elevation of the mountain,the Glaciar Norte of Citlatépetl has been the only glacier that has shown a certain degree of stability as a response to the altitude in which it is located.However,as occurs in almost all glaciers on the planet,the retreat of its glacier terminus has been continuous.Furthermore,during the last years the thickness of its upper part began to decrease rapidly until its bedrock was exposed for the first time in 2019.Due to its ecosystem importance and because it is the main glacier in Mexico,as well as the only one in the world located at latitude 19°N,in this work its current dimensions are updated,as well as the local climatology that governs the current state of the glacier is pointed out.The study was based on the analysis of high-resolution Sentinel-2 optical images,as well as through Sentinel-1 SAR images,with the support of climatological information from the study area.Therefore,the outcropping of the bedrock in the accumulation zone and the consequent horizontal retreat of the upper part of the glacier are documented;at the same time,the decrease in the thickness of the ice along it is noted.The rocky outcrop in the accumulation zone suggests that the flow dynamics of the ice towards the ablation zone will be considerably less,accelerating the retreat of the glacier terminus.Finally,the ascent of the glacial front to 5102 m a.s.l.and the modelled altitude of the equilibrium line to 5276 m a.s.l.are reported as a warning signal in terms of snow catchment and mass balance;likewise,the decrease of 23%of its surface is also indicated regarding the surface reduction monitoring that has been done until 2017.These findings may indicate that the future of this glacier is related to its possible extinction sooner than previously thought,with severe environmental consequences,especially in terms of the provision of drinking water for thousands of inhabitants of the slopes of the volcano.This research is expected to help reflect on the impacts of current climate variability and at the same time serve as a reference for the tropical glaciers on the planet.

Salt-Lake Basin Bedrock Weathered Crust Gas Reservoir in the Altun Mountains Front of the Qaidam Basin,Western China

The bedrock weathered crust in front of the Altun Mountains in the Qaidam Basin,western China,is different from others because this is a salt-lake basin,where saline water fluid infiltrates and is deposited in the overlying strata.A large amount of gypsum infills the bedrock weathered crust,and this has changed the pore structure.Using core observation,polarized light microscopy,electron probe,physical property analysis and field emission scanning electron microscopy experiments,the characteristics of the weathered bedrock have been studied.There are cracks and a small number of dissolved pores in the interior of the weathered crust.Matrix micropores are widely developed,especially the various matrix cracks formed by tectonics and weathering,as well as the stress characteristics of small dissolved pores,and physical properties such as porosity and permeability.This‘dual structure’developed in the bedrock is important for guiding the exploration of the lake basin bedrock for natural gas.

Paleoarchean bedrock lithologies across the Makhonjwa Mountains of South Africa and Swaziland linked to geochemical,magnetic and tectonic data reveal early plate tectonic genes flanking subduction margins

The Makhonjwa Mountains, traditionally referred to as the Barberton Greenstone Belt, retain an iconic Paleoarchean archive against which numerical models of early earth geodynamics can be tested. We present new geologic and structural maps, geochemical plots, geo- and thermo-chronology, and geophysical data from seven silicic, mafic to ultramafic complexes separated by major shear systems across the southern Makhonjwa Mountains. All reveal signs of modern oceanic back-arc crust and subductionrelated processes. We compare the rates of processes determined from this data and balance these against plate tectonic and plume related models. Robust rates of both horizontal and vertical tectonic processes derived from the Makhonjwa Mountain complexes are similar, well within an order of magnitude, to those encountered across modern oceanic and orogenic terrains flanking Western Pacific-like subduction zones. We conclude that plate tectonics and linked plate-boundary processes were well established by 3.2-3.6 Ga. Our work provides new constraints for modellers with rates of a 'basket' of processes against which to test Paleoarchean geodynamic models over a time period close to the length of the Phanerozoic.

Breaking mechanism and control technology of sandstone straight roof in thin bedrock stope

The key problem to be solved urgently is how to avoid the occurrence of support break-off and water inrush in the stoping of sandstone straight roof under the action of load transfer in unconsolidated aquifer.For this reason,taking the thin bedrock 1602(3)working face of Huainan(the middle part of Anhui Province)Panyi Coal Mine as the engineering background,this study establishes the stope mining model by using the discrete element UDEC software and the mathematics mechanical model of the support load,and analyzes the reason of support crushing and decides to re-mining the working face by using the compulsive roof caving method.It is concluded that when the working face of sandstone straight roof is broken,the"voussoir beam"structure cannot be formed and acts on the support in the form of cantilever beam,but only when it falls to the high key stratum can the"voussoir beam"structure be formed and at this point,at this time,the bracket bears the weight of the rock layer in the range from the fractured sandstone layer to the lower critical layer.The working resistance of the support increases with the increase of the thickness and the breaking length of straight sandstone roof.When the breaking length of the roof reaches a certain extreme value,the support crushing accidents will occur.Managing roof with compulsive roof caving method can reduce the intensity of rock pressure in the stope,and the working face can be safely stoped,which provides a certain reference for similar conditions.

TORSIONAL VIBRATIONS OF A RIGID CIRCULAR PLATE ON SATURATED STRATUM OVERLAYING BEDROCK

The torsional vibration of a rigid plate resting on saturated stratum overlaying bedrock has been analysed for the first time. The dynamic governing differential equations for saturated poroelastic medium are solved by employing the technology of Hankel transform. By taking into account the boundary conditions, the dual integral equations of torsional vibration of a rigid circular plate are established, which are further converted into a Fredholm integral equation of the second kind. Subsequently, the dynamic compliance coefficients of the foundation on saturated stratum, the contact shear stress under the foundation and the angular amplitude of the foundation are evaluated. Numerical results indicate that, when the dimensionless height is bigger than 5, saturated stratum overlaying bedrock can be treated as saturated half space approximately. When the dimensionless frequency is low, the permeability of the soil must be taken into account. Furthermore, when the vibration frequency is a constant, the height of the saturated stratum has a slight effect on the dimensionless contact shear stress under the foundation.

The Identification of Large-Giant Bedrock Landslides Triggered by Earthquake in the Longmenshan Tectonic Belt

The identification of large-giant bedrock landslides triggered by earthquake aims to the landslide prevention and control. Previous studies have described the basic characteristics, distribution, and the formation mechanism of seismic landslides （Bijan Khazai et al., 2003; Chong Xu et al., 2013; Lewis a. Owen et al., 2008; Randall W. Jibson et al., 2006）. However, few researches have focused on the early identification indicators of large-giant bedrock landslides triggered by earthquake （David k. Keefer., 1984; Janusz Wasowski et al., 2011; Alexander L.Strom., 2009; Patrick Meunier et al., 2008; Shahriar Vahdani et al., 2002; Bijan Khazai et al., 2003）. This paper presents the identification indicators of large-giant bedrock landslides triggered by earthquake in the Longmenshan tectonic belt on the basic of their characteristics, distribution and the relationship between seismic landslides and the peak ground motion acceleration.

Spatial distribution modeling of subsurface bedrock using a developed automated intelligence deep learning procedure:A case study in Sweden

Due to associated uncertainties,modelling the spatial distribution of depth to bedrock(DTB) is an important and challenging concern in many geo-engineering applications.The association between DTB,the safety and economy of design structures implies that generating more precise predictive models can be of vital interest.In the present study,the challenge of applying an optimally predictive threedimensional(3D) spatial DTB model for an area in Stockholm,Sweden was addressed using an automated intelligent computing design procedure.The process was developed and programmed in both C++and Python to track their performance in specified tasks and also to cover a wide variety of diffe rent internal characteristics and libraries.In comparison to the ordinary Kriging(OK) geostatistical tool,the superiority of the developed automated intelligence system was demonstrated through the analysis of confusion matrices and the ranked accuracies of different statistical errors.The re sults showed that in the absence of measured data,the intelligence models as a flexible and efficient alternative approach can account for associated uncertainties,thus creating more accurate spatial 3D models and providing an appropriate prediction at any point in the subsurface of the study area.

A modified TOPMODEL introducing the bedrock surface topographic index in Huangbengliu watershed,China

Subsurface stormflow is a dominant runoff mechanism in steep humid mountainous areas.An insite measurement of subsurface stormflow suggests that the bedrock surface plays an important role in the runoff generation and routing process,which was rarely adopted in hydrological modelling studies.To improve the runoff simulation performance,the bedrock surface topographic index is introduced,and a modified TOPMODEL based on the bedrock surface topographic index is developed to simulate the runoff.The modified TOPMODEL is applied to the Huangbengliu(HBL),a steep watershed in Gongga Mountain,and proved to be more appropriate for the HBL watershed,especially for peak simulation.The Nash-Sutcliffe model efficiency(NSE)is improved from 0.24 to 0.58 in the calibration period and from 0.40 to 0.62 in the verification period.The result of this study can advance the understanding of the mechanism of flash floods and contribute flood control and disaster prevention in the HBL watershed and similar areas.

Stochastic model of bedrock earthquake motion and determination of its parameters

ＳｔｏｃｈａｓｔｉｃｍｏｄｅｌｏｆｂｅｄｒｏｃｋｅａｒｔｈｑｕａｋｅｍｏｔｉｏｎａｎｄｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｉｔｓｐａｒａｍｅｔｅｒｓＤｉ－ＴａｏＮＩＵ（牛荻涛）（Ｘｉ＇ａｎＵｎｉｖｅｒｓｉｔｙｏｆＡｒｃｈｉｔｅｃｔｕｒａｌＳｃｉｅｎｃｅａｎ...

Formation of Potholes Associated with Bedrock Gorges on Mesozoic Sandstone of Khari River, Kachchh Mainland, Western India

The potholes are perceptible erosional features associated with bedrock channels. They play an essential role in bedrock incision studies, but little work has been published on the development of potholes, especially in Bedrock Rivers in India. The present site-specific study aims to analyze the role of physical properties of bedrock and associated structures in the process of development of potholes and to classify the potholes based on their dimensions. The Khari River gorge formed over Mesozoic Sandstone with six bedrock terraces exposed along a confined segment of the river. The site is manifested by strath terraces, grooves, potholes, and knick points. Three stretches of Khari Gorge have been studied in detail for this purpose. The pothole dimensions, joint orientations, rock mass strength, physical properties of rock, and placing of potholes to present active channels were measured. The analysis shows the inverse relationship between the size of pothole and rock properties. The distance of potholes and active channels govern the essential factor and manifest the role of flow hydraulics. The high density of matured potholes near active channels over immature potholes supports primary control of hydraulics of flow over rock properties.

Avulsion Dynamics in a River with Alternating Bedrock and Alluvial Reaches, Huron River, Northern Ohio (USA)

The Huron River consists of alternating bedrock reaches and alluvial reaches. Analysis of historical aerial photography from 1950-2015 reveals six major channel avulsion events in the 8-km study area. These avulsions occurred in the alluvial reaches but were strongly influenced by the properties of the upstream bedrock reach (“inherited characteristics”). The bedrock reaches aligned with the azimuth of joint sets in the underlying bedrock. One inherited characteristic in the alluvial reach downstream is that the avulsion channels diverged only slightly from the orientation of the upstream bedrock channel (range 2 °- 38 °, mean and standard deviation 12.1 °± 13.7 °). A second inherited characteristic is that avulsion channels were initiated from short distances downstream after exiting the upstream bedrock channel reach (range 62 - 266 m, mean and standard deviation 143.7 ± 71.0 m), which is a fraction of the meander wavelength (1.2 km). Field evidence shows that some avulsion channel sites were re-occupied episodically. In addition, two properties were necessary for channel avulsions: 1) avulsion events were triggered by channel-forming hydrologic events (5-year recurrence interval flows), but not every channel-forming hydrologic event resulted in an avulsion, and 2) channel sinuosity (P) increased to 1.72 - 1.77 prior to an avulsion then decreased to 1.65 - 1.70 following an avulsion, suggesting that P ≥ 1.72 is the “critical sinuosity” or triggering value for avulsions on the Huron River. In summary, for this river consisting of alternating bedrock and alluvial reaches, the bedrock reaches impose certain parameters on downstream alluvial reaches (including sediment supply, channel direction and avulsion channel position downstream after exiting a bedrock reach) while adjustments in sinuosity and sediment storage occur in the alluvial reaches.

Modeling the Sediment Fill of the Upper Troy Pre-Glacial Bedrock Valley, McHenry County, Illinois, USA

The Troy Bedrock Valley (TBV) and its tributary valleys are the principal pre-glacial drainage in southern Wisconsin and northern Illinois, USA. This study focused on the headwaters of a tributary that occurs in McHenry County, IL. Drilling, geophysical surveys, and the analysis of existing geologic and water well data were used to determine the lithologic and geometric characteristics of the sediments that fill the paleovalley. A 3D geologic model of these sediments was then developed in Petrel. More than 65 m of Quaternary sediments filled the paleovalley. The model domain covers approximately 30 km2. The valley drains to the west and meanders, which is distinct from the straight course of the overlying modern Kishwaukee River. The sediments that filled the valley were subdivided into five units. These units include Illinois-age Glasford Formation coarse-grained proglacial outwash and alluvial deposits (GS2, GS1) and fine-grained lacustrine and diamicton deposits (G2 and G1). The Wisconsin-age Henry Formation sand and gravel cap the valley fill, and Cahokia alluvium buries everything.

Classification of conditions for short-wall continuous mechanical mining in shallowly buried coal seam with thin bedrock

The room and pillar method is usually used to extract coal from shallowly buried seams with thin bedrock. This results in a very low production efficiency and in a low degree of extraction. In recent years short-wall continuous mechanical mining has been extensively used in many situations except shallowly buried coal seams with thin bedrock. The principles governing movement of the overlying strata above the 2-2 coal seam were deduced from in-situ experience, laboratory data, calculations and computer simulations. The thicknesses of the bedrock in the Shendong Coal Field where the coal is shallowly buried are classified into 5 types: <10 m, 10–15 m, 15–25 m, 25–35 m and >35 m, which was done using fuzzy clustering results. A series of reasonable, relative parameters in each category have been calculated and analyzed. One proposed way to perform short-wall continuous mechanical mining in shallowly buried coal seams is given. This is significant for coal mines with similar geological conditions.

Fractal Character of China Bedrock Coastline

Fractal theory was applied to a preliminary discussion of the fractal character and formation mechanism of the coastline of the bedrock coast of China on the basis of GIS (Geographical Information System). Some significant conclusions were drawn:(1) The fractal dimensions of the coastline and linear structures of Liaodong Peninsula are 1.0093 and 1.0246 respectively, those of Shandong Peninsula are 1.019 and 1.021 respectively, etc.(2) The fractal dimensions of coastlines of Liaodong Peninsula, Shandong Peninsula, Zhejiang and Fujian-Guangdong tend to increase with the spatial change from north to south.(3)The regional linear structures(including faults)control the basic trends and fractal dimensions of coastlines as a whole in the regions of the bedrock coast of China:the more the controlling effect of linear structures, the smaller the fractal dimensions of coastlines.(4)The substantial constituents of coast and biologic function both play an important role in affecting the fractal dimensions of coastlines of Liaodong Peninsula, Shandong Peninsula, Zhejiang, Fujian-Guangdong and Taiwan Island.

Study of the engineering geologic feature of weathering zone of bedrock in 810 producing area of Luling Mine

For a safe extracting of the mine resource of the razor thin capping rock, a study of waterproof, sand prevention, roof fall prevention must be made. As a result, it’s necessary to master the engineering feature of weathering zone of bedrock. According to the lithology appraisal and X diffract analyses, the mineral feature of weathering zone of bedrock in 810 producing area has been studied in this article. By testing the physical mechanics index of weathering zone, we have found out some features of physical mechanic quality. Utilizing the determined result of viscosity index and slaking test, we reach a conclusion of the water stability of weathering zone, that is the weathering zone rock belongs to the type that is easily slaked when encountered water and the water stability is weak.

Practice and adaptable conditions classification of aquifer-protective mining in longwall coalface for shallow seam with thin bedrock

A set of adaptable conditions classification of aquifer-protective mining in thelongwall coalface for shallow coal seams with thin bedrock was put forward to deal withthe conflict between water protection and high efficiency for the mining field in west China.This classification was suitable for shallow coal seams with different thickness and wasbeneficial to the local environmental protection.Using the 3-Universal Distinct ElementCode (3DEC) numerical software, the height of the fractured zones for shallow coal seamswith thin bedrock was calculated and analyzed, and its predicting formula was achieved.Meanwhile, according to the lithology and the weathering degree of the shallow coal seam,the thickness of the protective layer was determined as 10 m and the overlying water bodyof loose water-bearing sand for shallow coal seams with thin bedrock was divided intothree types, namely, weak, medium and strong.Based on these, the necessary bedrockthickness of the longwall coalface for shallow coal seams with thin bedrock was confinedaccording to the different mining height and water yield nature of the overlying loose water-bearing sand.Combined with the present mining status, a set of new methods ofadaptable conditions classification of aquifer-protective mining technology in the longwallcoalface for shallow coal seams with thin bedrock was put forward.

The Relationship Among Bedrock Seismic Ground Motion Parameters with Different Exceedance Probabilities in the Panxi Area

Based on the calculation of the bedrock effective peak acceleration (EPA) zoning map in the Panxi area, the ratios of EPA with exceedance probabilities of 63%, 5%, 3%, 2% and 1% over 50 years to that of 10% in 50 years are 0.302, 1.30, 1.55, 1.76 and 2.14, respectively. The seismic effect will be conservative and safe if taking this zoning map as the earthquake resistant fortification level and following the relevant rules of the Code for Seismic Design of Buildings (GBJ11 89) to calculate the seismic effect. Furthermore, the main factors that influence the A10/A63 ratios have been found to be the attenuation relationship of seismic ground motion, the division of seismic potential source regions and the seismicity parameters. These achievements are helpful to the spreading and applying of the zoning map.