The modal method is applied to analyze coupled vibration of belt drive systems. A belt drive system is a hybrid system consisting of continuous belts modeled as strings as well as discrete pulleys and a tensioner arm....The modal method is applied to analyze coupled vibration of belt drive systems. A belt drive system is a hybrid system consisting of continuous belts modeled as strings as well as discrete pulleys and a tensioner arm. The characteristic equation of the system is derived from the governing equation. Numerical results demenstrate the effects of the transport speed and the initial tension on natural frequencies.展开更多
A nonlinear rotational motion model for n-pulley damped serpentine belt drive systems （SBDSs） was developed.The effects of the belt deflection along the contact arc of pulleys on the belt span tensions were consider...A nonlinear rotational motion model for n-pulley damped serpentine belt drive systems （SBDSs） was developed.The effects of the belt deflection along the contact arc of pulleys on the belt span tensions were considered.The methods for calculating the tensioner arm vibration and belt slipping on pulleys were introduced.The effects of belt damping on rotational vibration of tensioner arm and belt slipping on pulleys were studied.Numerical solutions for a 3-pulley SBDS indicate that the belt slipping at the steady states should be controlled to avoid belt slipping at transient states.The slip factors tend to decrease when the belt damping increases,and the possibility of the belt slipping can be controlled through adjusting the wrap angles of pulleys and the preload of the tensioner when the design parameters of SBDS remain constant.展开更多
A short review for the existing various driving methods for belt conveyor was given, which include the analysis and comparison about the advantages, disadvantages and suitable application range of these methods. Based...A short review for the existing various driving methods for belt conveyor was given, which include the analysis and comparison about the advantages, disadvantages and suitable application range of these methods. Based on this the vari-able-frequency-control(VFC) method for belt conveyor drive was fully discussed with focus on its application in medium-high voltage range. The principle of Neutral Point Clamped (NPC) Three-Level Inverter using high-voltage IGBTs together with the control strategy of rotor field-oriented vector control for induction motor drive were illustrated.展开更多
To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the siz...To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the size of the robot to handle the panel increased also. The change in scale of the robot inevitably results ill the amplification of the adverse effect of tile flexure. The main source of the flexure in the large scale solar cell panel handling system is the long and thin fork fingers of the [land and the solar cell panel. In addition, tile belt-driven actuator system used by most of the large scale panel handling robot is another significant source of the vibration. In this paper, the flexible multi body dynamic model of a large scale solar cell panel handling robot, which is being designed and constructed with the help of Kyung Hee University, is developed. The belt-driven system in the robot is also modeled as flexible system and included ill the robot to represent the actual vibration characteristics of the actuator system. C 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi： 10.1063/2.1301310]展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.10672092 and 10725209)Scientific Research Project of Shanghai Municipal Education Commission(No.07ZZ07)Shanghai Leading Academic Discipline Project(No.Y0103)
文摘The modal method is applied to analyze coupled vibration of belt drive systems. A belt drive system is a hybrid system consisting of continuous belts modeled as strings as well as discrete pulleys and a tensioner arm. The characteristic equation of the system is derived from the governing equation. Numerical results demenstrate the effects of the transport speed and the initial tension on natural frequencies.
基金Sponsored by the National Natural Science Foundation of China(50975091)Science Fund of State Key Laboratory of Automotive Safety and Energy(KF10162)
文摘A nonlinear rotational motion model for n-pulley damped serpentine belt drive systems （SBDSs） was developed.The effects of the belt deflection along the contact arc of pulleys on the belt span tensions were considered.The methods for calculating the tensioner arm vibration and belt slipping on pulleys were introduced.The effects of belt damping on rotational vibration of tensioner arm and belt slipping on pulleys were studied.Numerical solutions for a 3-pulley SBDS indicate that the belt slipping at the steady states should be controlled to avoid belt slipping at transient states.The slip factors tend to decrease when the belt damping increases,and the possibility of the belt slipping can be controlled through adjusting the wrap angles of pulleys and the preload of the tensioner when the design parameters of SBDS remain constant.
文摘A short review for the existing various driving methods for belt conveyor was given, which include the analysis and comparison about the advantages, disadvantages and suitable application range of these methods. Based on this the vari-able-frequency-control(VFC) method for belt conveyor drive was fully discussed with focus on its application in medium-high voltage range. The principle of Neutral Point Clamped (NPC) Three-Level Inverter using high-voltage IGBTs together with the control strategy of rotor field-oriented vector control for induction motor drive were illustrated.
基金supported by the Korean Ministry of Knowledge and Economics(10035218)
文摘To increase the competition of the solar energy collection system, the size of the solar panel module during the manufacturing process is being increased continuously. As the size of the solar panel increases, the size of the robot to handle the panel increased also. The change in scale of the robot inevitably results ill the amplification of the adverse effect of tile flexure. The main source of the flexure in the large scale solar cell panel handling system is the long and thin fork fingers of the [land and the solar cell panel. In addition, tile belt-driven actuator system used by most of the large scale panel handling robot is another significant source of the vibration. In this paper, the flexible multi body dynamic model of a large scale solar cell panel handling robot, which is being designed and constructed with the help of Kyung Hee University, is developed. The belt-driven system in the robot is also modeled as flexible system and included ill the robot to represent the actual vibration characteristics of the actuator system. C 2013 The Chinese Society of Theoretical and Applied Mechanics. [doi： 10.1063/2.1301310]
