Blasting is a cost-effective technique to break hard rock volumes by using explosives in the mining and civil engineering realms. Moreover, although blasting is a designed process and plays an indispensable role in th...Blasting is a cost-effective technique to break hard rock volumes by using explosives in the mining and civil engineering realms. Moreover, although blasting is a designed process and plays an indispensable role in these industries, it can also have multiple adverse environmental impacts. One such effect is flyrock, which poses risks to nearby machinery, and residential structures, and can even lead to injuries or fatalities. To optimize blasting efficiency as well as restrict side effects, prediction of the blast aftereffects is vital. Therefore, the present work focuses on using two machine learning methods to predict the velocity of flyrock in the open pit mine. To address this issue, a comprehensive dataset was gathered from the open pit mine. Then, Decision Tree and Random Forest algorithms were employed to predict flyrock velocity. The Random Forest model demonstrated superior performance compared to the Decision Tree model. Nonetheless, the performance of the Decision Tree model was deemed satisfactory, as evidenced by its coefficient of determination value of 0.83, mean squared error (MSE) of 4.2, and mean absolute percentage error (MAPE) of 5.6%. Considering these metrics, it is reasonable to conclude that tree-based algorithms can be effective in predicting flyrock velocity.展开更多
One of the most important characters of blasting,a basic step of surface mining,is rock fragmentation because it directly effects on the costs of drilling and economics of the subsequent operations of loading,hauling ...One of the most important characters of blasting,a basic step of surface mining,is rock fragmentation because it directly effects on the costs of drilling and economics of the subsequent operations of loading,hauling and crushing in mines.Adaptive neuro-fuzzy inference system(ANFIS)and radial basis function(RBF)show potentials for modeling the behavior of complex nonlinear processes such as those involved in fragmentation due to blasting of rocks.We developed ANFIS and RBF methods for modeling of sizing of rock fragmentation due to bench blasting by estimation of 80%passing size(K_(80))of Golgohar iron mine of Sirjan.Iran.Comparing the results of ANFIS and RBF models shows that although the statistical parameters RBF model is acceptable but ANFIS proposed model is superior and also simpler because ANFIS model is constructed using only two input parameters while seven input parameters used for construction of RBF model.展开更多
Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was f...Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.展开更多
The purpose of this study was to determine whether the training responses observed with low-load resistance exercise to volitional fatigue translates into significant muscle hypertrophy, and compare that response to h...The purpose of this study was to determine whether the training responses observed with low-load resistance exercise to volitional fatigue translates into significant muscle hypertrophy, and compare that response to high-load resistance training. Nine previously untrained men (aged 25 [SD 3] years at the beginning of the study, standing height 1.73 [SD 0.07] m, body mass 68.9 [SD 8.1] kg) completed 6-week of high load-resistance training (HL-RT) (75% of one repeti-tion maximal [1RM], 3-sets, 3x/wk) followed by 12 months of detraining. Following this, subjects completed 6 weeks of low load-resistance training (LL-RT) to volitional fatigue (30% 1 RM, 4 sets, 3x/wk). Increases (p 0.05) in magnetic resonance imaging-measured triceps brachii and pectorals major muscle cross-sectional areas were similar for both HL-RT (11.9% and 17.6%, respectively) and LL-RT (9.8% and 21.1%, respectively). In addition, both groups increased (p 0.05) 1RM and maximal elbow extension strength following training;however, the percent increases in 1RM (8.6% vs. 21.0%) and elbow extension strength (6.5% vs. 13.9%) were significantly (p 0.05) lower with LL-RT. Both protocols elicited similar increases in muscle cross-sectional area, however differences were observed in strength. An explanation of the smaller relative increases in strength may be due to the fact that detraining after HL-RT did not cause strength values to return to baseline levels thereby producing smaller changes in strength. In addition, the results may also suggest that the consistent practice of lifting a heavy load is necessary to maximize gains in muscular strength of the trained movement. These results demonstrate that significant muscle hypertrophy can occur without high-load resistance training and suggests that the focus on percentage of external load as the important deciding factor on muscle hypertrophy is too simplistic and inappropriate.展开更多
Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major in...Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major intraprocedural problem and for the long term,as a place of restenosis.Methods We created an elastic wall model (parent vessel diameter 3.5mm,daughter branches 3.5mm and 2.75mm)with 30,45 and 60 degree distal angulation between branches.After stent implantation,struts to the side branch were opened with 2.0mm and consequently 3.0mm diameter balloons.Subsequent balloon redilatations and kissing balloon inflations (KBI) were performed.All stages of the procedure were photographed with magnification up to 100 times.Results We found that the leading mechanism for side branch compromise was carina displacement,and discovered theoretical description for expected ostial stenosis severity.Based on our model we found that displacement of bifurcation flow divider cause SB stenosis with almost perfect coincidence with our theoretical predictions.Opening of stent cells through the proximal and distal stent struts always increased interslrut distance,but never achieved good apposition to the wall.Balloon diameter increase didn't give proportional enlargement in stent cell diameters.KBI leads to some small better stent positioning,correcting main vessel strut dislodgment from wall,but never gave full strut-wall contact.Distance between struts and wall was minimal only when the stent cell perfectly faced ostium of SB.This was also our observation that the shape of ostium of SB becomed eUiptically-bean shaped after stent implantation and generally kept that shape during consequent stages of experiment.Measured diameter and area stenosis were perfectly fitted and theoretically predicted from our concept Conclusion We have described stent-wall deformations in stent-balloon technique for treatment of coronary bifurcation demonstrating carina displacement as possibly main mechanism of side branch compromise after main vessel stenting.We have shown that KBI could not give full strut-wall contact if there is no perfect facing of stem cell and SB ostium.(J Geroatr Cardool 2008;5(1):43-49)展开更多
A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection co...A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.展开更多
In next two years, the current waste dump of Narynsukhait coal mine is predicted insufficient to accommodate the overburden as limited of the waste dump capacity. Thus, redesigning waste dump is paramount to increase ...In next two years, the current waste dump of Narynsukhait coal mine is predicted insufficient to accommodate the overburden as limited of the waste dump capacity. Thus, redesigning waste dump is paramount to increase capacity of the dump in future. This paper describes current condition of waste dump of Narynsukhait coal mine and then discusses the optimization of waste dump geometry by analyzing the effect of different waste dump’s bench configuration on slope performance. Optimization of the geometry is carried out by investigating and comparing the performance of geometrical combinations of bench height, bench angles and number of safety berm by means of numerical modeling. The model shows that increasing height of bench is able to induce shear stress in the bench and may initiate bench instable. However, the shear stress can be limited by having safety berm and/or reducing bench angle to satisfy the stability criteria.展开更多
In 2016, room-and-pillar mining provided nearly 40% of underground coal production in the United States.Over the past decade, rib falls have resulted in 12 fatalities, representing 28% of the ground fall fatalities in...In 2016, room-and-pillar mining provided nearly 40% of underground coal production in the United States.Over the past decade, rib falls have resulted in 12 fatalities, representing 28% of the ground fall fatalities in U.S.underground coal mines.Nine of these 12 fatalities(75%) have occurred in room-andpillar mines.The objective of this research is to study the geomechanics of bench room-and-pillar mining and the associated response of high pillar ribs at overburden depths greater than 300 m.This paper provides a definition of the bench technique, the pillar response due to loading, observational data for a case history, a calibrated numerical model of the observed rib response, and application of this calibrated model to a second site.展开更多
Glacio-isostatic adjustment(GIA)and tectonic activity are important factors in the formation of marine terraces.Late Holocene wave-cut benches in the eastern part of the West Sea of Korea,also called the Yellow Sea,ca...Glacio-isostatic adjustment(GIA)and tectonic activity are important factors in the formation of marine terraces.Late Holocene wave-cut benches in the eastern part of the West Sea of Korea,also called the Yellow Sea,can be divided into two steps:531 cm above sea level(ASL)for the upper bench(T2)and 464-481 cm ASL for the lower bench(T1).Sediments on the benches a re classified into four units,and are interpreted to be beach deposits acco rding to gravel shape,textu re,and seaward inclination.The ove rlying sediment indicates that T2 was formed at approximately 530 cm ASL before 2900 yr BP,and T1 at approximately 460-480 cm ASL before 1520 yr BP.Late Holocene(4000-2000 yr BP)relative sea level(RSL)curves based on GIA models are inconsistent with the wave-cut bench elevations.Comparing T1 and T2 benches to the RSL curves of the West Sea,the upper and the lower benches were uplifted by approximately 5-8 m and 4-7 m,respectively.Although the area is several hundred kilometers away from plate boundaries,the high frequency of earthquakes in the West Sea may have induced the uplift of wave-cut benches during the last 2000 years.These indicate that the west coast of the Korean Peninsula(KP)should no longer be considered an area of subsidence,but be assigned to a regime of uplift during the late Holocene.展开更多
At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a h...At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically “at home” with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.展开更多
如果你到国外留学、进修,在实验室(laboratory=lab)里做各种实验是必不可少的。当你第一次走进实验室工作时,导师会对你说:“I shall assign abench for you to work on.”你听到这样的话可能会感到迷惑不解。其实在英国,公园的长凳和...如果你到国外留学、进修,在实验室(laboratory=lab)里做各种实验是必不可少的。当你第一次走进实验室工作时,导师会对你说:“I shall assign abench for you to work on.”你听到这样的话可能会感到迷惑不解。其实在英国,公园的长凳和实验室里的实验台都称为 bench。用 bench 组成的合成词也很多。如:bench mark(水准点、水准基标),bench side(焦面),而 benchcentrifuge 指的是实验台上的小型离心机。展开更多
文摘Blasting is a cost-effective technique to break hard rock volumes by using explosives in the mining and civil engineering realms. Moreover, although blasting is a designed process and plays an indispensable role in these industries, it can also have multiple adverse environmental impacts. One such effect is flyrock, which poses risks to nearby machinery, and residential structures, and can even lead to injuries or fatalities. To optimize blasting efficiency as well as restrict side effects, prediction of the blast aftereffects is vital. Therefore, the present work focuses on using two machine learning methods to predict the velocity of flyrock in the open pit mine. To address this issue, a comprehensive dataset was gathered from the open pit mine. Then, Decision Tree and Random Forest algorithms were employed to predict flyrock velocity. The Random Forest model demonstrated superior performance compared to the Decision Tree model. Nonetheless, the performance of the Decision Tree model was deemed satisfactory, as evidenced by its coefficient of determination value of 0.83, mean squared error (MSE) of 4.2, and mean absolute percentage error (MAPE) of 5.6%. Considering these metrics, it is reasonable to conclude that tree-based algorithms can be effective in predicting flyrock velocity.
基金financially supported by the Special Fund of Islamic Azad University,Malayer Branch(No.2293)
文摘One of the most important characters of blasting,a basic step of surface mining,is rock fragmentation because it directly effects on the costs of drilling and economics of the subsequent operations of loading,hauling and crushing in mines.Adaptive neuro-fuzzy inference system(ANFIS)and radial basis function(RBF)show potentials for modeling the behavior of complex nonlinear processes such as those involved in fragmentation due to blasting of rocks.We developed ANFIS and RBF methods for modeling of sizing of rock fragmentation due to bench blasting by estimation of 80%passing size(K_(80))of Golgohar iron mine of Sirjan.Iran.Comparing the results of ANFIS and RBF models shows that although the statistical parameters RBF model is acceptable but ANFIS proposed model is superior and also simpler because ANFIS model is constructed using only two input parameters while seven input parameters used for construction of RBF model.
文摘Framework and basic parameters of a test bench for motor drive system of electric vehicle (EV) are illuminated. Two kinds of electric drive models, one was for the electric vehicle drived on real road, the other was for that on test bench, are put forward. Then, dynamic analysis of these models is made in detail. Inertia matching method of the test bench is researched and some useful formulas and graphs are brought forward. The experiment of an electric bus is introduced in order to explain the usage of this inertia matching method.
文摘The purpose of this study was to determine whether the training responses observed with low-load resistance exercise to volitional fatigue translates into significant muscle hypertrophy, and compare that response to high-load resistance training. Nine previously untrained men (aged 25 [SD 3] years at the beginning of the study, standing height 1.73 [SD 0.07] m, body mass 68.9 [SD 8.1] kg) completed 6-week of high load-resistance training (HL-RT) (75% of one repeti-tion maximal [1RM], 3-sets, 3x/wk) followed by 12 months of detraining. Following this, subjects completed 6 weeks of low load-resistance training (LL-RT) to volitional fatigue (30% 1 RM, 4 sets, 3x/wk). Increases (p 0.05) in magnetic resonance imaging-measured triceps brachii and pectorals major muscle cross-sectional areas were similar for both HL-RT (11.9% and 17.6%, respectively) and LL-RT (9.8% and 21.1%, respectively). In addition, both groups increased (p 0.05) 1RM and maximal elbow extension strength following training;however, the percent increases in 1RM (8.6% vs. 21.0%) and elbow extension strength (6.5% vs. 13.9%) were significantly (p 0.05) lower with LL-RT. Both protocols elicited similar increases in muscle cross-sectional area, however differences were observed in strength. An explanation of the smaller relative increases in strength may be due to the fact that detraining after HL-RT did not cause strength values to return to baseline levels thereby producing smaller changes in strength. In addition, the results may also suggest that the consistent practice of lifting a heavy load is necessary to maximize gains in muscular strength of the trained movement. These results demonstrate that significant muscle hypertrophy can occur without high-load resistance training and suggests that the focus on percentage of external load as the important deciding factor on muscle hypertrophy is too simplistic and inappropriate.
文摘Objective To describe changes that occur in stent morphology and structure after its implantation in coronary bifurcation.Side branch (SB) compromise after stenting of main vessel in coronary bifurcation is a major intraprocedural problem and for the long term,as a place of restenosis.Methods We created an elastic wall model (parent vessel diameter 3.5mm,daughter branches 3.5mm and 2.75mm)with 30,45 and 60 degree distal angulation between branches.After stent implantation,struts to the side branch were opened with 2.0mm and consequently 3.0mm diameter balloons.Subsequent balloon redilatations and kissing balloon inflations (KBI) were performed.All stages of the procedure were photographed with magnification up to 100 times.Results We found that the leading mechanism for side branch compromise was carina displacement,and discovered theoretical description for expected ostial stenosis severity.Based on our model we found that displacement of bifurcation flow divider cause SB stenosis with almost perfect coincidence with our theoretical predictions.Opening of stent cells through the proximal and distal stent struts always increased interslrut distance,but never achieved good apposition to the wall.Balloon diameter increase didn't give proportional enlargement in stent cell diameters.KBI leads to some small better stent positioning,correcting main vessel strut dislodgment from wall,but never gave full strut-wall contact.Distance between struts and wall was minimal only when the stent cell perfectly faced ostium of SB.This was also our observation that the shape of ostium of SB becomed eUiptically-bean shaped after stent implantation and generally kept that shape during consequent stages of experiment.Measured diameter and area stenosis were perfectly fitted and theoretically predicted from our concept Conclusion We have described stent-wall deformations in stent-balloon technique for treatment of coronary bifurcation demonstrating carina displacement as possibly main mechanism of side branch compromise after main vessel stenting.We have shown that KBI could not give full strut-wall contact if there is no perfect facing of stem cell and SB ostium.(J Geroatr Cardool 2008;5(1):43-49)
基金the Ministerial Level Advanced Research Foundation (404050301 .4)
文摘A unit pump test bench is developed on an in-line pump test platform. The bench is composed of pump adapting assembly, fuel supply subsystem, lubricating subsystem and a control unit. A crank angle domain injection control method is given out and the control accuracy can be 0.1° crank degree. The bench can test both mechanical unit pump and electronic unit pump. A test model-PLD12 electronic unit pump is tested. Full pump delivery map and some influence factors test is done. Experimental results show that the injection quantity is linear with the delivery angle. The quantity change rate is 15% when fuel temperature increases 30 ℃. The delivery quantity per cycle increases 30 mg at 28 V drive voltage. The average delivery difference for two same type pumps is 5 %. Test results show that the bench can be used for unit pump verification.
文摘In next two years, the current waste dump of Narynsukhait coal mine is predicted insufficient to accommodate the overburden as limited of the waste dump capacity. Thus, redesigning waste dump is paramount to increase capacity of the dump in future. This paper describes current condition of waste dump of Narynsukhait coal mine and then discusses the optimization of waste dump geometry by analyzing the effect of different waste dump’s bench configuration on slope performance. Optimization of the geometry is carried out by investigating and comparing the performance of geometrical combinations of bench height, bench angles and number of safety berm by means of numerical modeling. The model shows that increasing height of bench is able to induce shear stress in the bench and may initiate bench instable. However, the shear stress can be limited by having safety berm and/or reducing bench angle to satisfy the stability criteria.
文摘In 2016, room-and-pillar mining provided nearly 40% of underground coal production in the United States.Over the past decade, rib falls have resulted in 12 fatalities, representing 28% of the ground fall fatalities in U.S.underground coal mines.Nine of these 12 fatalities(75%) have occurred in room-andpillar mines.The objective of this research is to study the geomechanics of bench room-and-pillar mining and the associated response of high pillar ribs at overburden depths greater than 300 m.This paper provides a definition of the bench technique, the pillar response due to loading, observational data for a case history, a calibrated numerical model of the observed rib response, and application of this calibrated model to a second site.
基金supported by grant 2017-MOIS31-006 from the Research and Development of Active Faults of Korea Peninsula funded by the Korean Ministry of Public Safety and Security (MPSS)by grant NP2018-017 from the Research on Geologic Hazard Assessment of Large Fault Systems Focusing on the Central Region of the Yangsan from the Basic Research Project of the Korea Institute of Geoscience+1 种基金Mineral Resources (KIGAM) funded by the Korean Ministry of Science and ICT.S.K.appreciate the partialsupport by the NRF-2017R1A6AIA07015374 (Multi-disciplinary study for assessment of large earthquake potentials in the Korean Peninsula)NRF-2019R1A2C1002211 through the National Research Foundation of Korea funded by the Ministry of Science and ICT,Korea
文摘Glacio-isostatic adjustment(GIA)and tectonic activity are important factors in the formation of marine terraces.Late Holocene wave-cut benches in the eastern part of the West Sea of Korea,also called the Yellow Sea,can be divided into two steps:531 cm above sea level(ASL)for the upper bench(T2)and 464-481 cm ASL for the lower bench(T1).Sediments on the benches a re classified into four units,and are interpreted to be beach deposits acco rding to gravel shape,textu re,and seaward inclination.The ove rlying sediment indicates that T2 was formed at approximately 530 cm ASL before 2900 yr BP,and T1 at approximately 460-480 cm ASL before 1520 yr BP.Late Holocene(4000-2000 yr BP)relative sea level(RSL)curves based on GIA models are inconsistent with the wave-cut bench elevations.Comparing T1 and T2 benches to the RSL curves of the West Sea,the upper and the lower benches were uplifted by approximately 5-8 m and 4-7 m,respectively.Although the area is several hundred kilometers away from plate boundaries,the high frequency of earthquakes in the West Sea may have induced the uplift of wave-cut benches during the last 2000 years.These indicate that the west coast of the Korean Peninsula(KP)should no longer be considered an area of subsidence,but be assigned to a regime of uplift during the late Holocene.
文摘At present moment, there is a great interest in development of information systems operating in cloud infrastructures. Generally, many of tasks remain unresolved such as tasks of optimization of large databases in a hybrid cloud infrastructure, quality of service (QoS) at different levels of cloud services, dynamic control of distribution of cloud resources in application systems and many others. Research and development of new solutions can be limited in case of using emulators or international commercial cloud services, due to the closed architecture and limited opportunities for experimentation. Article provides answers to questions on the establishment of a pilot cloud practically “at home” with the ability to adjust the width of the emulation channel and delays in data transmission. It also describes architecture and configuration of the experimental setup. The proposed modular structure can be expanded by available computing power.
文摘如果你到国外留学、进修,在实验室(laboratory=lab)里做各种实验是必不可少的。当你第一次走进实验室工作时,导师会对你说:“I shall assign abench for you to work on.”你听到这样的话可能会感到迷惑不解。其实在英国,公园的长凳和实验室里的实验台都称为 bench。用 bench 组成的合成词也很多。如:bench mark(水准点、水准基标),bench side(焦面),而 benchcentrifuge 指的是实验台上的小型离心机。