The windward bend lattice frame structure(WB structure)is characterized by a high heat transfer coefficient and low friction factor.The WB structure can be applied for ther-mal protection system,protecting outer walls...The windward bend lattice frame structure(WB structure)is characterized by a high heat transfer coefficient and low friction factor.The WB structure can be applied for ther-mal protection system,protecting outer walls of afterburner and nozzles from being damaged by the heating load of hot gas,for air cooling system of the power battery module,dissipating the heat generated during its charging and discharging.In this paper,the heat transfer charac-teristics of the windward bend lattice frame structure have been comprehensively studied.A systematic 3D numerical simulation has been conducted to investigate the effects of the struc-tural parameters of the WB structure,including the pitches in both flow direction and transverse direction,the diameter and the inclination angle of windward bend ligament,on its flow resis-tance and heat transfer enhancement,which has been evaluated by comparing its Nusselt num-ber under an equal pumping power.Furthermore,the contribution of an important parameter,i.e.,the ratio of the interstitial heat transfer rate to the end-wall heat transfer rate(RQ),to the overall heat transfer rate has been fully discussed.As a result,the case of 6 units in the longi-tudinal direction and 2.5 units in the transverse direction,i.e.(nx Z 6,nz Z 2.5)exhibits the best performance in the light of the value of the Nusselt number. Moreover, the structure with aratio of RQ ranges in 4.5e5.0 achieves a better heat transfer performance. Finally, two colorcontour graphs showing an optimal range of Nusselt number coordinated by unit numbers(nx, nz) for pumping powers of 2500 and 3000 have been presented. The graphs correctly reflectthe variation of Nusselt numbers of structures with different nx and nz, and the conclusionsremain consistent with the discussion in sections 4.2 and 4.3, instructing the reasonable selec-tion of structural parameters of a thermal protection system embedded with WB structure.展开更多
We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexib...We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexible polyimide(PI)substrate and a planar spiral inductance coil(thickness 300 nm),made using micro-electro-mechanical system(MEMS)technology.It can be bent or folded at will,and can be attached firmly to the surface of objects with a bending structure.The principle of radio frequency wireless transmission is used to measure the acceleration signal by changing the distance between the accelerometer and the antenna.Compared with other accelerometers with a lead wire,the accelerometer can prevent the lead from falling off in the course of vibration,thereby prolonging its service life.Through establishment of an experimental platform,when the distance between the antenna and accelerometer was 5 mm,the characterization of the surface of bending structures demonstrated the sensing capabilities of the accelerometer at accelerations of 20-100 m/s2.The results indicate that the acceleration and peak-to-peak output voltage were nearly linear,with accelerometer sensitivity reaching 0.27 mV/(m·s-2).Moreover,the maximum error of the accelerometer was less than 0.037%.展开更多
In recent years, DNA supramolecular hydrogels have attracted much attention due to their injectability, biocompatibility, responsiveness and self-healing properties. In this work, we designed a linear DNA brick contai...In recent years, DNA supramolecular hydrogels have attracted much attention due to their injectability, biocompatibility, responsiveness and self-healing properties. In this work, we designed a linear DNA brick containing one duplex with two cytosine(C)-rich sequence on both ends. This brick can first assemble to form duplex under p H 8 condition. After adjusting the p H to 5, the C-rich sequence tends to form intermolecular i-motif structure, which joins the linear DNA molecules together to form interlocked cyclic structures and yield the DNA hydrogel. By adjusting the length and bending curvature of the duplex part of the molecule, one can change the basic unit of the hydrogel structure to tune the properties of the DNA hydrogel.展开更多
基金The authors are grateful for financial support from grant of National Science Foundation of China(No.52006179)from the Fundamental Research Funds for the Central Universities(31020190QD706 and 3102020OMS701)from the National Science and Technology Major Project(J2019-III-0019-0063).
文摘The windward bend lattice frame structure(WB structure)is characterized by a high heat transfer coefficient and low friction factor.The WB structure can be applied for ther-mal protection system,protecting outer walls of afterburner and nozzles from being damaged by the heating load of hot gas,for air cooling system of the power battery module,dissipating the heat generated during its charging and discharging.In this paper,the heat transfer charac-teristics of the windward bend lattice frame structure have been comprehensively studied.A systematic 3D numerical simulation has been conducted to investigate the effects of the struc-tural parameters of the WB structure,including the pitches in both flow direction and transverse direction,the diameter and the inclination angle of windward bend ligament,on its flow resis-tance and heat transfer enhancement,which has been evaluated by comparing its Nusselt num-ber under an equal pumping power.Furthermore,the contribution of an important parameter,i.e.,the ratio of the interstitial heat transfer rate to the end-wall heat transfer rate(RQ),to the overall heat transfer rate has been fully discussed.As a result,the case of 6 units in the longi-tudinal direction and 2.5 units in the transverse direction,i.e.(nx Z 6,nz Z 2.5)exhibits the best performance in the light of the value of the Nusselt number. Moreover, the structure with aratio of RQ ranges in 4.5e5.0 achieves a better heat transfer performance. Finally, two colorcontour graphs showing an optimal range of Nusselt number coordinated by unit numbers(nx, nz) for pumping powers of 2500 and 3000 have been presented. The graphs correctly reflectthe variation of Nusselt numbers of structures with different nx and nz, and the conclusionsremain consistent with the discussion in sections 4.2 and 4.3, instructing the reasonable selec-tion of structural parameters of a thermal protection system embedded with WB structure.
基金Project supported by the China Aviation Development Group IndustryUniversity-Research Cooperation Project(No.HFZL2020CXY019)the Fundamental Research Program of Shanxi Province,China(No.20210302123024)the National Natural Science Foundation of China(No.51821003)。
文摘We propose an inductor-capacitor(LC)wireless passive flexible accelerometer,which eliminates the difficulty in measuring the acceleration on the surface of a bending structure.The accelerometer is composed of a flexible polyimide(PI)substrate and a planar spiral inductance coil(thickness 300 nm),made using micro-electro-mechanical system(MEMS)technology.It can be bent or folded at will,and can be attached firmly to the surface of objects with a bending structure.The principle of radio frequency wireless transmission is used to measure the acceleration signal by changing the distance between the accelerometer and the antenna.Compared with other accelerometers with a lead wire,the accelerometer can prevent the lead from falling off in the course of vibration,thereby prolonging its service life.Through establishment of an experimental platform,when the distance between the antenna and accelerometer was 5 mm,the characterization of the surface of bending structures demonstrated the sensing capabilities of the accelerometer at accelerations of 20-100 m/s2.The results indicate that the acceleration and peak-to-peak output voltage were nearly linear,with accelerometer sensitivity reaching 0.27 mV/(m·s-2).Moreover,the maximum error of the accelerometer was less than 0.037%.
基金financially supported by the National Basic Research Program of China(973 program,No.2013CB932803)the National Natural Science Foundation of China(No.21534007)the Beijing Municipal Science&Technology Commission
文摘In recent years, DNA supramolecular hydrogels have attracted much attention due to their injectability, biocompatibility, responsiveness and self-healing properties. In this work, we designed a linear DNA brick containing one duplex with two cytosine(C)-rich sequence on both ends. This brick can first assemble to form duplex under p H 8 condition. After adjusting the p H to 5, the C-rich sequence tends to form intermolecular i-motif structure, which joins the linear DNA molecules together to form interlocked cyclic structures and yield the DNA hydrogel. By adjusting the length and bending curvature of the duplex part of the molecule, one can change the basic unit of the hydrogel structure to tune the properties of the DNA hydrogel.