Decoherence of fiber light sources using a single-trench fiber

Decoherence of fiber laser sources is of great importance in imaging applications,and most current studies use ordinary multi-mode fibers(MMFs).Here,a newly designed single-trench fiber(STF)is investigated to reduce the spatial coherence of fiber light source and compared with MMFs.By bending two fibers with different turns,speckle contrast of a 0.8-m-long STF can be reduced from 0.13 to 0.08,while a 0.8-m-long MMF shows an inverse result.Through speckle contrast and decoupling-mode analysis,the reason of this inverse trend is revealed.Firstly,the STF supports more modes than the MMF due to its larger core diameter.Secondly,mode leak from the first core of the STF can couple to the second core when bending the STF.Thus,power distribution among high and low-order modes become more even,reducing the spatial coherence considerably.However,in the MMF,high-order modes become leaky modes and decrease slightly when bending the fiber.This work provides a new method to modulate coherence of light source and a new angle to study decoherence principle using special fibers.

The Design of Bending Long Period of Photonic Crystal Fiber Grating Sensors

The bending photonic crystal fiber grating sensor is an important role in underwater monitoring and fire alarm systems. It is studied that the resonant wavelength expression of bending long period photonic crystal fiber gratings is deduced, it is designed that a bending long period photonic crystal fiber grating sensor system, it is calculated in theory that between the bending long period photonic crystal fiber gratings sensor resonance wavelength and the grating period and the bending strain. The result is shown by calculating and analysing in theory, the grating curvature is increased by the increase of the bending strain of the grating, and the resonance wavelength of the grating sensor is drifted, the drift amount is increased, one in this grating, the drifted amount of the resonant wavelength is 0.014 nm.

Fiber Bending Flexibility Evaluation by Worm-like Chain Model

A new method for characterizing fiber bending flexibility was developed by worm-like chain model proposed by Kratky-Porod,[1]which was first introduced to the pulp and paper field in this study.For the three types of pulps,the experimental results were compared with the KP chain model,and the resulting determination coefficients were all above 0.95,which proved that the model was feasible to be applied to these three fibers.The relation between fiber bending rigidity and that of cellulosic chains inside was discussed to deduce the fiber bending flexibility.The flexibility of an individual fiber can be approximated as the contribution of that of all the cellulose chains inside.By this method,the fiber flexibility values were determined to be in the range of 0.6×10^(11)-3.5×10^(11)N^(-1)·m^(-2),which was comparable to that of the conventional methods recorded in the literature.

Analytical formulation for the bend loss in single-ring hollow-core photonic crystal fibers

Understanding bend loss in single-ring hollow-core photonic crystal fibers(PCFs)is becoming of increasing importance as the fibers enter practical applications.While purely numerical approaches are useful,there is a need for a simpler analytical formalism that provides physical insight and can be directly used in the design of PCFs with low bend loss.We show theoretically and experimentally that a wavelength-dependent critical bend radius exists below which the bend loss reaches a maximum,and that this can be calculated from the structural parameters of a fiber using a simple analytical formula.This allows straightforward design of single-ring PCFs that are bend-insensitive for specified ranges of bend radius and wavelength.It also can be used to derive an expression for the bend radius that yields optimal higher-order mode suppression for a given fiber structure.