Feasibility of measuring moisture content of green sand by a low frequency multiprobe detector based on dielectric characteristics

Green sand is a mixture of silica sand,bentonite,water and coal powder,and other additives.Moisture content is an important index to characterize the properties of green sand.Based on the dielectric characteristics of green sand and transmission line theory,a method for rapidly measuring the moisture content of green sand by means of a low frequency multiprobe detector was proposed.A system was constructed,where six detectors with different arrangements and probes were designed.The experimental results showed that the voltage difference of transmission line increases with the increasing frequency before 29 MHz while decreases after 35 MHz.A voltage difference platform occurs in the range of 29-35 MHz,which is suitable for measuring the moisture content due to its insensitivity to frequency.The electric field intensity gradually decreases with the increase of the probe depth,and the intensity of central probe is always greater than that of the edge probe.When the distance of the probe away from the sand sample surface is 80 mm,the electric field intensity of the edge probe is found to be very weak.The optimal excitation frequency for measuring the moisture content of green sand is 29-33 MHz.The optimal detector is the one with one center probe and three edge probes,and their lengths are 80 mm and 60 mm,respectively.The distance between the center and edge probes is 25 mm,and the diameter of probes is 5 mm.Taking the voltage difference of transmission line,bentonite content,coal powder content and compactability as parameters of the input layer,and the moisture content as a parameter of the output layer,a three-layer BP artificial neural network model for predicting the moisture content of green sand was constructed according to the experimental results at 33 MHz.The prediction error of the model is not higher than 3.3% when the moisture content of green sand is within the range of 3wt.%-7wt.%.

The lateral pressure coefficient at rest of expansive soils in landfill at various vertical stresses and moisture contents

When expansive soils in the original location are artificially transferred to landfill in different seasons,and subject to engineering activities afterwards,the corresponding deformation and stability of retaining structures become unpredictable.This necessitates the determination of lateral pressure coefficient at rest(k_(0) value)for expansive soils in landfill.Considering compaction,excavation of expansive soils,as well as construction of landfill in different seasons,series of stepwise loading and unloading consolidation tests at various moisture contents were carried out in this work to explore the evolution characteristics of k_(0) value and assess the dependence of k_(0) value on vertical stress and moisture content.Besides,scanning electron microscope(SEM)was used to track the change in microstructural features with vertical stresses.The results indicated that the k_(0) value of expansive soil shows a pronounced nonlinearity and is inextricably linked with vertical stress and moisture content,based on which a prediction formula to estimate the variation in k_(0) value with vertical stress during loading stage was proposed;there is a significant exponential increase in k_(0) value with overconsolidation ratio(OCR)during unloading stage,and OCR dominates the release of horizontal stress of expansive soil;SEM results revealed that with an increase in vertical stress,the anisotropy of expansive soil microstructure increases dramatically,causing a significant directional readjustment,which is macroscopically manifested as an initially rapid increase in k_(0) value;but when vertical stress increases to a critical value,the anisotropy of microstructure increases marginally,indicating a stable orientation occurring in the soil microstructure,which causes the k_(0) value to maintain a relatively stable value.

Modelling the dead fuel moisture content in a grassland of Ergun City,China

The dead fuel moisture content(DFMC)is the key driver leading to fire occurrence.Accurately estimating the DFMC could help identify locations facing fire risks,prioritise areas for fire monitoring,and facilitate timely deployment of fire-suppression resources.In this study,the DFMC and environmental variables,including air temperature,relative humidity,wind speed,solar radiation,rainfall,atmospheric pressure,soil temperature,and soil humidity,were simultaneously measured in a grassland of Ergun City,Inner Mongolia Autonomous Region of China in 2021.We chose three regression models,i.e.,random forest(RF)model,extreme gradient boosting(XGB)model,and boosted regression tree(BRT)model,to model the seasonal DFMC according to the data collected.To ensure accuracy,we added time-lag variables of 3 d to the models.The results showed that the RF model had the best fitting effect with an R2value of 0.847 and a prediction accuracy with a mean absolute error score of 4.764%among the three models.The accuracies of the models in spring and autumn were higher than those in the other two seasons.In addition,different seasons had different key influencing factors,and the degree of influence of these factors on the DFMC changed with time lags.Moreover,time-lag variables within 44 h clearly improved the fitting effect and prediction accuracy,indicating that environmental conditions within approximately 48 h greatly influence the DFMC.This study highlights the importance of considering 48 h time-lagged variables when predicting the DFMC of grassland fuels and mapping grassland fire risks based on the DFMC to help locate high-priority areas for grassland fire monitoring and prevention.

Dry Matter Accumulation,Moisture Content in Maize Kernel and Their Influences on Mechanical Harvesting

[Objective] The aim of this study was to investigate the dry matter accumulation,moisture content in maize kernel and their influences on mechanical harvesting.[Methods] Using Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 as experimental materials,we preliminarily measured the dynamic changes of dry matter accumulation and moisture content with the days after pollination lasted,and investigated the effect of moisture content in kernels on mechanical harvesting of Zhengdan 958 and Liyu 16.[Results] During summer growing season,Zhengdan 958 and Liyu 16 became physiologically mature and suitable for harvesting at about 51 days after pollination,Xianyu 335 and Hongda 8 required 58 days to become physiologically mature and suitable for harvesting after pollination.At physiologically mature stage,the moisture contents in kernels of Zhengdan 958,Xianyu 335,Hongda 8 and Liyu 16 were respectively 33.74%,28.86%,32.05% and 35.24%,respectively.Adopting mechanical harvesting at physiologically mature stage,the kernel loss rate of Zhengdan 958 and Liyu 16 was consistent with the range of mechanical operation index（kernel loss rate of 0.84%≤2%）,while the percentage of broken kernels did not accord with the range of mechanical operation index（kernel crashing rate of 10.12%≧1%）.The results indicate that Zhengdan 958 and Liyu 16 are not suitable for mechanical harvesting using full feeding combine havester.[Conclusion] This study provided theoretical basis for improving the maize harvest index under delayed harvesting.

Effects of Fertilization on Moisture Content of Soils in the Loess Hilly-gully Region

[Objective] The aim of this study was to study the influence of plants on the soil moisture content under different fertilization.[Method] Using sainfoin,sweet clover,Astragalus adsurgens,alfalfa,ryegrass,little flower,white clover as experimental material,this study explored the effects of soil moisture on the improvement of soil quality.[Result] Results showed that the soil moisture content of different plants follows as：sainfoin 〉sweet clover 〉Astragalus adsurgens 〉alfalfa perennial ryegrass 〉small crown 〉white clover,and the average moisture content reached 24.13% which was 2.45% higher than that of control group.At planting white clover,sweet clover,under the condition of 7 kinds of crops,in the treatments without fertilizer and with organic fertilizer,soil moisture content of soil in 0-20 cm grew significantly.[Conclusion] The application of organic fertilizer and growing of plants would improve soil moisture in abandoned fields,enhance the ability of soil water supply,and improve soil fertility.

Effects of Ground Mulching Treatments on Soil Moisture Content in Second-generation Seed Garden of Pinus elliottii

Different ground mulching treatments were designed to observe the effects on soil moisture content in a second-generation seed orchard of Pinus elliottii. The results showed that： （1） there were extreme differences in soil moisture content Ⅰ and soil moisture content Ⅲ, but no obvious difference in soil moisture content II was observed; and （2） the high-to-low order of soil moisture content Ⅰ under different ground mulching treatments was white film〉sawdust〉black film〉the control, and the highest value was higher than the lowest one by 26.69%; the high-to-low order of soil moisture content Ⅱ under different ground mulching treatments was white film〉black film〉sawdust〉the control, and the highest value was higher than the lowest one by 20.64%; and the high-to-low order of soil moisture content Ⅲ under different ground mulching treatments was black film〉white film〉sawdust〉the control, and the highest value was higher than the lowest one by 26.61%.

Effects of Soil Moisture Content and p H on Residual Dynamics of Chlorothalonil in Acidified Soil

[Objective] This study aimed to investigate the residual dynamics of chlorothalonil in acidified soil under different conditions of soil moisture content and pH. [Method] By simulation tests, the effects of different soil moisture content and pH on chlorothalonil residues in acidified soil were analyzed. [Result] Under different conditions of soil moisture content and pH, the residual quantity of chlorothalonil in acidified soil was reduced gradually with the extension of incubation time. To be specific, the reduction rate of chlorothalonil residues in soil was extremely high within the first three days and slightly declined at 3-7 d; after 7 d, the residual quantity of chlorothalonil in soil was reduced slowly and steadily. [Conclusion] This study provides the reference for soil environmental remediation and maintenance of a health cultivation system.

Real-time Monitoring Scheme of Soil Moisture Content in Paddy Field

The monitoring of soil moisture content in paddy field is one of important parts and contents of regional soil moisture monitoring. But a good monitoring scheme hasn’t been established. A real-time monitoring scheme of soil moisture content in paddy field was put forward from two key links of soil moisture content monitoring and field water-layer monitoring. This scheme could meet the alternative monitoring requirements of soil moisture content in water layer and none-water layer. It had a good maneuverability and could provide references for practical work.

Influences of soil moisture and salt content on loess shear strength in the Xining Basin, northeastern Qinghai-Tibet Plateau

Moisture and salt content of soil are the two predominant factors influencing its shear strength. This study aims to investigate the effects of these two factors on shear strength behavior of loess in the Xining Basin of Northeast Qinghai-Tibet Plateau, where such geological hazards as soil erosion, landslides collapse and debris flows are widespread due to the highly erodible loess. Salinized loess soil collected from the test site was desalinized through salt-leaching in the laboratory. The desalinized and oven-dried loess samples were also artificially moisturized and salinized in order to examine how soil salinity affects its shear strength at different moisture levels. Soil samples prepared in different ways(moisturizing, salt-leaching, and salinized) were measured to determine soil cohesion and internal friction angle. The results show that salt-leaching up to 18 rounds almost completely removed the salt content and considerably changed the physical components of loess, but the soil type remained unchanged. As salt content increases from 0.00% to 12.00%, both the cohesion and internal friction angle exhibit an initial decrease and then increase with salt content. As moisture content is 12.00%, the salt content threshold value for both cohesion and internal friction angle is identified as 3.00%. As the moisture content rises to 16.0% and 20.00%, the salt content threshold value for cohesion is still 6.00%, but 3.00% for internal friction angle. At these thresholds soil shear strength is the lowest, below which it is inversely related to soil salinity. Beyond the thresholds, however, the relationship is positive. Dissimilar to salinity, soil moisture content exerts an adverse effect on shear strength of loess. The findings of this study can provide a valuable guidance on stabilizing the engineering properties of salinized loess to prevent slope failures during heavy rainfall events.

A distributed measurement method for in-situ soil moisture content by using carbon-fiber heated cable

Moisture content is a fundamental physical index that quantifies soil property and is closely associatedwith the hydrological, ecological and engineering behaviors of soil. To measure in-situ soil moisturecontents, a distributed measurement system for in-situ soil moisture content （SM-DTS） is introduced.The system is based on carbon-fiber heated cable （CFHC） technology that has been developed to enhancethe measuring accuracy of in-situ soil moisture content. Using CFHC technique, a temperature characteristicvalue （Tt） can be defined from temperatureetime curves. A relationship among Tt, soil thermalimpedance coefficient and soil moisture content is then established in laboratory. The feasibility of theSM-DTS technology to provide distributed measurements of in-situ soil moisture content is verifiedthrough field tests. The research reported herein indicates that the proposed SM-DTS is capable ofmeasuring in-situ soil moisture content over long distances and large areas.

Performance evaluation of two types of heated cables for distributedtemperature sensing-based measurement of soil moisture content

Distributed temperature sensing(DTS)using heated cables has been recently developed for distributed monitoring of in-situ soil moisture content.In this method,the thermal and electrical properties of heated cables have a significant influence on the measurement accuracy of soil moisture content.In this paper,the performances of two heated cables,i.e.the carbon-fiber heated cable(CFHC)and the metalnet heated cable(MNHC),are studied in the laboratory.Their structures,uniformity in the axial direction,measurement accuracy and suitability are evaluated.The test results indicate that the MNHC has a better uniformity in the axial direction than CFHC.Both CFHC and MNHC have high measurement accuracy.The CFHC is more suitable for short-distance measurement(500 m),while the MNHC can be used for longdistance measurement(>500 m).

Measurement of lumber moisture content based on PCA and GSSVM

Lumber moisture content(LMC) is the important parameter to judge the dryness of lumber and the quality of wooden products.Nevertheless the data acquired are mostly redundant and incomplete because of the complexity of the course of drying,by interference factors that exist in the dryness environment and by the physical characteristics of the lumber itself.To improve the measuring accuracy and reliability of LMC,the optimal support vector machine(SVM) algorithm was put forward for regression analysis LMC.Environmental factors such as air temperature and relative humidity were considered,the data of which were extracted with the principle component analysis method.The regression and prediction of SVM was optimized based on the grid search(GS) technique.Groups of data were sampled and analyzed,and simulation comparison of forecasting performance shows that the main component data were extracted to speed up the convergence rate of the optimum algorithm.The GS-SVM shows a better performance in solving the LMC measuring and forecasting problem.

Study on the Relationship between.the Moisture Content of Brown Rice and Milling Characteristics

An experiment about rice milling was made to study on the relationship between the different moisture content of brown rice and the energy consumption, the broken rice rate, the crack rate and the head rice yield. It could be concluded that the head rice yield increased at first falls and then along with the raise of moisture content and it could reach the maximum 70.78% when moisture content was 15.5%; the energy consumption of rice milling decreased along with the increase of moisture contents; the broken rice rate fell at first and then increased along with the raise of moisture contents and it could reach the minimum 4.28% when the moisture content was 15.5%.

Prediction model of moisture content of dead fine fuel in forest plantations on Maoer Mountain,Northeast China

Preventing and suppressing forest fires is one of the main tasks of forestry agencies to reduce resource loss and requires a thorough understanding of the importance of factors affecting their occurrence.This study was carried out in forest plantations on Maoer Mountain in order to develop models for predicting the moisture content of dead fine fuel using meteorological and soil variables.Models by Nelson(Can J For Res 14:597-600,1984)and Van Wagner and Pickett(Can For Service 33,1985)describing the equilibrium moisture content as a function of relative humidity and temperature were evaluated.A random forest and generalized additive models were built to select the most important meteorological variables affecting fuel moisture content.Nelson’s(Can J For Res 14:597-600,1984)model was accurate for Pinus koraiensis,Pinus sylvestris,Larix gmelinii and mixed Larix gmelinii—Ulmus propinqua fuels.The random forest model showed that temperature and relative humidity were the most important factors affecting fuel moisture content.The generalized additive regression model showed that temperature,relative humidity and rain were the main drivers affecting fuel moisture content.In addition to the combined effects of temperature,rainfall and relative humidity,solar radiation or wind speed were also significant on some sites.In P.koraiensis and P.sylvestris plantations,where soil parameters were measured,rain,soil moisture and temperature were the main factors of fuel moisture content.The accuracies of the random forest model and generalized additive model were similar,however,the random forest model was more accurate but underestimated the effect of rain on fuel moisture.

Does nitrogen application rate affect the moisture content of corn grains?

Nitrogen fertilizer application is an important measure to obtain high and stable corn yield,and the moisture content of corn grains is an important factor affecting the quality of mechanical grain harvesting.In this study,four different nitrogen fertilizer treatments from 0 to 450 kg ha^(–1) pure nitrogen were set for a planting density of 12.0×10^(4) plants ha^(–1) in 2017 and 2018,and 18 different nitrogen fertilizer treatments from 0 to 765 kg ha^(–1) pure nitrogen were set for planting densities of 7.5×10^(4) and 12.0×10^(4) plants ha^(–1) in 2019,to investigate the effect of nitrogen application rate on the moisture content of corn grains.Under each treatment,the growth of corn,leaf area index(LAI)of green leaves,grain moisture content,and grain dehydration rate were measured.The results showed that,as nitrogen application increased from 0 to 765 kg ha^(–1),the silking stage was delayed by about 1 day,the maturity stage was delayed by about 1–2 days,and the number of physiologically mature green leaves and LAI increased.At and after physiological maturity,the extreme difference in grain moisture content between different nitrogen application rates was 1.9–4.0%.As the amount of nitrogen application increased,the corn grain dehydration rate after physiological maturity decreased,but it did not reach statistical significance between nitrogen application rate and grain dehydration rate.No significant correlation was observed between LAI at physiological maturity and grain dehydration rate after physiological maturity.In short,nitrogen application affected the grain moisture content of corn at and after physiological maturity,however,the difference in grain moisture content among different nitrogen application rates was small.These results suggest that the effect of nitrogen application on the moisture content of corn grains should not be considered in agricultural production.

The Characteristic Relationship Between Oil Uptake and Moisture Content during the High Temperature Immersion Frying of Thin Potato Crisps

Thin potato crisps (2mm) were fried at 170℃, 180℃ and 190℃ for varioustimes from 10s to 180s inclusive. It was found that definite oil uptake, moisture loss trends existduring the frying process. No significant difference in the oil uptake or moisture loss ratesbetween flat-cut and ridge-cut crisps exists. Also found in this study was that an increased oiltemperature promoted higher moisture loss rates. In turn, the higher moisture loss rates contributedto a higher oil uptake rate. It was found, based on the volumetric plots of oil content υs. watercontent, that the oil uptake rate was proportional to the moisture loss rate. As a result, it hasbeen shown that there is a possibility of having a characteristic curve of oil uptake againstmoisture content.

Nondestructive testing method of wood moisture content based on a planar capacitance sensor model

For our research, a new hybrid experimental-computational method is presented. We applied a least squares fitting method （LSFM） to reconstruct the wood moisture content （WMC） from the data measured with a planar capacitance sensor. A boundary element method （BEM） was used to compute the relationship between capacitance and the dielectric constant. A functional relationship between MC and the dielectric constant was identified by LSFM. The agreement of this final computation result with the experimental data indicates that this method can be used to estimate the WMC quickly and effectively with engineering analysis. Compared with popular statistical methods, a large number of experiments are avoided, some costs of testing are reduced and the efficiency of testing is enhanced.

Diurnal variation models for fine fuel moisture content in boreal forests in China

Studying diurnal variation in the moisture content of fine forest fuel(FFMC)is key to understanding forest fire prevention.This study established models for predicting the diurnal mean,maximum,and minimum FFMC in a boreal forest in China using the relationship between FFMC and meteorological variables.A spline interpolation function is proposed for describing diurnal variations in FFMC.After 1 day with a 1 h field measurement data testing,the results indicate that the accuracy of the sunny slope model was 100%and 84%when the absolute error was<3%and<10%,respectively,whereas the accuracy of the shady slope model was 72%and 76%when the absolute error was<3%and<10%,respectively.The results show that sunny slope and shady slope models can predict and describe diurnal variations in fine fuel moisture content,and provide a basis for forest fire danger prediction in boreal forest ecosystems in China.

Influence of soil moisture content on pullout properties of Hippophae rhamnoides Linn. roots

Plant root system plays an important role in preventing soil erosion and improving slope stability.However,its performance is significantly affected by soil moisture content,and the role of soil moisture in root reinforcement is not fully understood.In this study,the influence of soil moisture on root pullout properties was studied by experiments.Vertical in-situ pullout tests under four different levels of soil matric suction(12 kPa,18 kPa,24 kPa,30 kPa)were carried out on roots of sea buckthorn plants(Hippophae rhamnoides Linn.)which were artificially cultivated for 7 months.Diameter and length of the root system of sea buckthorn were investigated.The results showed that a very significant correlation was observed between root diameter(D)and root length(L)(P<0.01),and root diameter decreased with soil depth.When soil bulk density was constant,peak pullout force(F)and friction coefficient of root-soil interface(μ)decreased with increasing gravimetric soil moisture content in power functions.Soil moisture content significantly affected root pullout resistance because the increase of soil moisture content decreased the friction coefficient between the roots and soil.Root diameter at breakage point(Db)and length of root segment left in soil(Lb)were increased with soil moisture content.In addition,peak pullout force of the roots increased in a power function with root diameter at the soil surface(D0)and in a linear function with total root length(L).The results provided an experimental basis for quantifying the effects of soil moisture content on soil reinforcement by plant roots.

Effect of steam pretreatment on wood moisture content and characteristics of vacuum drying

The effects of high temperature steam pretreatment on the change in wood moisture content （MC） and characteristics of vacuum drying were investigated in this study. Poplar and manchurian walnut woods were pretreated with high temperature steam at 100~C and 140~C, prior to vacuum drying. A comparison of the characteristics of vacuum drying between steam pretreated wood and untreated wood was carried out. The results show that during steam pretreatment, the MC of wood decreased within a few hours. The reduction of MC varied with the temperature; the higher the temperature, the faster the MC dropped. During the vacuum drying stage, the rates of drying ofpretreated samples were higher than those of untreated samples when MC was below the fiber saturation point. Furthermore, the total drying time of samples treated at a steam temperature of 140~C was lower than that of untreated samples. Therefore, a vacuum procedure after steam pretreatment can effectively shorten the drying time when drying wood.