Optimal AP Deployment in Cell-Free Massive MIMO Systems with LoS/NLoS Transmissions:A Stochastic Geometry Approach

Cell-free massive multiple-input multipleoutput(MIMO)is a promising technology for future wireless communications,where a large number of distributed access points(APs)simultaneously serve all users over the same time-frequency resources.Since users and APs may locate close to each other,the line-of-sight(Lo S)transmission occurs more frequently in cell-free massive MIMO systems.Hence,in this paper,we investigate the cell-free massive MIMO system with Lo S and non-line-of-sight(NLo S)transmissions,where APs and users are both distributed according to Poisson point process.Using tools from stochastic geometry,we derive a tight lower bound for the user downlink achievable rate and we further obtain the energy efficiency(EE)by considering the power consumption on downlink payload transmissions and circuitry dissipation.Based on the analysis,the optimal AP density and AP antenna number that maximize the EE are obtained.It is found that compared with the previous work that only considers NLo S transmissions,the actual optimal AP density should be much smaller,and the maximized EE is actually much higher.

Opportunities to Improve the Quality of Environmental Reports and the Effectiveness of Environmental Impact Assessment: A Case of Electric Power Transmission Systems in Brazil

A good quality Environmental Impact Statement (EIS) is key for the effectiveness of Environmental Impact Assessment (EIA) processes and consequently to the acceptability of projects subject to EIA. The international literature has contributed to the understanding of the essential aspects to be verified regarding the quality of EIS, offering a wide spectrum of good practice examples related to the content of the studies. Even so, there is a need for empirical studies that allow the identification of specific aspects related to the context of application of the EIS, which could lead to the identification of opportunities to improve both the quality of the reports and also the effectiveness of EIA. Therefore, the present paper is focused on the quality review of a number of EIS submitted to the Brazilian Federal Environmental Agency (Ibama) to instruct the assessment of electric power transmission systems. Based on the application of the EIS quality review package as proposed by Lee and Colley (1992), the outcomes reveal opportunities for improving the scope of EIA, analysis of alternatives, prediction of magnitude and the assessment of impact significance. Finally, the development and/or adaptation of a similar tool for the systematic review of the quality of EIA reports is recommended.

Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Energy-efficient data transmission with non-ideal circuit power for downlink cellular networks

The downlink energy-efficient transmission schedule with non-ideal circuit power over Wreless networks involving a single transmitter and multiple receivers was investigated. According to the special structure of the problem, a novel algorithm called OOSCPMR （the optimal offine scheduling with non-ideal circuit power for multi-receivers） is proposed, and the optimal offine solutions to optimize the energy- efficient transmission policy are found. The packets to be transmitted can be divided into two types where one type of packet is determined to be transmitted using the enrgy- efficient tansmission time, and the other type of packet is determined by the ID moveright algorithm. Finally, an energy-efficient online schedule is developed based on te proposed OOSCPMR algoriAm. Simulation results show that the optima offline transmission schedule provides te lower bound performance for the online tansmission schedule. The proposed optimal offline and online policy is more energy efficient than the existing schemes tat assume ideal circuit power.

Study on shift schedule saving energy of automatic transmission of ground vehicles

To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain. The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift, and in the low efficiency range on the right when the transmission worked at the highest shift. The shift quality key factors were analysed. The automatic trans-mission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed. The experimental results showed that the shift schedule was correct and that the shift quality was controllable.

Large-Scale Renewable Energy Transmission by HVDC: Challenges and Proposals

Renewable energy transmission by high-voltage direct current(HVDC)has attracted increasing attention for the development and utilization of large-scale renewable energy under the Carbon Peak and Carbon Neutrality Strategy in China.High-penetration power electronic systems(HPPESs)have gradually formed at the sending end of HVDC transmission.The operation of such systems has undergone profound changes compared with traditional power systems dominated by synchronous generators.New stability issues,such as broadband oscillation and transient over-voltage,have emerged,causing tripping accidents in large-scale renewable energy plants.The analysis methods and design principles of traditional power systems are no longer suitable for HPPESs.In this paper,the mechanisms of broadband oscillation and transient over-voltage are revealed,and analytical methods are proposed for HPPESs,including small-signal impedance analysis and electromagnetic transient simulation.Validation of the theoretical research has been accomplished through its application in several practical projects in north,northwest,and northeast region of China.Finally,suggestions for the construction and operation of the future renewable-energy-dominated power system are put forward.

Failure Process and Energy Transmission for Single-Layer Reticulated Domes Under Impact Loads

No failure, moderate failure, severe failure, and slight failure are the four failure modes generalized observed in the dynamic response of the single-layer reticulated dome under vertical impact load on apex. TE (the time that the end of impact force) and TF (the time that members are broken) are two key times in the failure process. Characteristics of dynamic responses at the two key times are shown in order to make the failure mechanism clear. Then three steps of energy transfer are summarized, i.e. energy applying, energy loss and energy transfer, energy consump-tion. Based on the three steps, energy transfer process for the failure reticulated dome under once impact is introduced. Energy transmissibility and local loss ratio are put forward firstly to obtain EL F(the energy left in the main reticulated dome) from the initial kinetic energy of impactor. More-over, the distribution of failure modes is decided by EL F which leads to the maximum dynamic re-sponse of the reticulated dome, but not by the initial impact kinetic energy of impactor.

Transmission line fault-cause identification method for large-scale new energy grid connection scenarios

The accurate fault-cause identification for overhead transmission lines supports the operation and maintenance personnel in formulating targeted maintenance strategies and shortening the time of inspecting faulty lines.With the goal of achieving“carbon peak and carbon neutrality”,the schemes for clean energy generation have rapidly developed.Moreover,new energy-consuming equipment has been widely connected to the power grid,and the operating characteristics of the power system have significantly changed.Consequently,these have impacted traditional fault identification methods.Based on the time-frequency characteristics of the fault waveform,new energy-related parameters,and deep learning model,this study proposes a fault identification method suitable for scenarios where a high proportion of new energy is connected to the power grid.Ten parameters related to the causes of transmission line fault and new energy connection scenarios are selected as model characteristic parameters.Further,a fault identification model based on adaptive deep belief networks was constructed,and its effect was verified by field data.

The quantum Kirchhoff equation and quantum current and energy spectrum of a homogeneous mesoscopic dissipation transmission line

On the basis of quantization of charge, the loop equations of quantum circuits are investigated by using the Helsenberg motion equation for a mesoscopic dissipation transmission line. On the supposition that the system has a symmetry under translation in charge space, the quantum current and the quantum energy spectrum in the mesoscopic transmission llne are given by solving their eigenvalue equations. Results show that the quantum current and the quantum energy spectrum are not only related to the parameters of the transmission llne, but also dependent on the quantized character of the charge obviously.

Energy Efficiency Based on Joint Data Packet Fragmentation and Cooperative Transmission

Energy efficiency(EE) is a key requirement for the design of short-range communication network.In order to alleviate energy consumption(EC) constraint,a novel layered heterogeneous mobile cloud architecture is proposed in this paper.Based on the proposed layered heterogeneous mobile cloud architecture,we establish an appropriate energy consumption model,and design an energy efficiency scheme based on joint data packet fragmentation and cooperative transmission and analyze the energy efficiency corresponding to different packet sizes and the cloud size.Simulation results show that,when all nodes of the cloud are accessing the same size of data packet fragmentation,the proposed layered heterogeneous mobile cloud architecture can provide significant energy savings.The results provide useful insights into the possible operation of the strategies and show that significant energy consumption reductions are possible.

Role of optimal transmission switching in accommodating renewable energy in deep peak regulation-enabled power systems

Due to the shortage of fossil energy and the pollution caused by combustion of fossil fuels,the proportion of renewable energy in power systems is gradually increasing across the world.Accordingly,the capacity of power systems to accommodate renewable energy must be improved.However,integration of a large amount of renewable energy into power grids may result in network congestion.Hence,in this study,optimal transmission switching(OTS)is considered as an important method of accommodating renewable energy.It is incorporated into the operation of a power grid along with deep peak regulation of thermal power units,forming an interactive mode of coordinated operation of source and network.A stochastic unit commitment model consider!ng deep peak regulation and OTS is established,and the role of OTS in promoting the accommodation of renewable energy is analyzed quantitatively.The results of case studies involving the IEEE 30-bus system demonstrate that OTS can enable utilization of the potential of deep peak regulation and facilitate the accommodation of renewable energy.

Impact of mechanical ventilation control strategies based on non-steady-state and steady-state Wells-Riley models on airborne transmission and building energy consumption

Ventilation is an effective solution for improving indoor air quality and reducing airborne transmission.Buildings need sufficient ventilation to maintain a low infection risk but also need to avoid an excessive ventilation rate,which may lead to high energy consumption.The Wells-Riley(WR)model is widely used to predict infection risk and control the ventilation rate.However,few studies compared the non-steady-state(NSS)and steady-state(SS)WR models that are used for ventilation control.To fill in this research gap,this study investigates the effects of the mechanical ventilation control strategies based on NSS/SS WR models on the required ventilation rates to prevent airborne transmission and related energy consumption.The modified NSS/SS WR models were proposed by considering many parameters that were ignored before,such as the initial quantum concentration.Based on the NSS/SS WR models,two new ventilation control strategies were proposed.A real building in Canada is used as the case study.The results indicate that under a high initial quantum concentration(e.g.,0.3 q/m^(3))and no protective measures,SS WR control underestimates the required ventilation rate.The ventilation energy consumption of NSS control is up to 2.5 times as high as that of the SS control.

Self-Adaptive Matching Method of Signal and Energy Transmission

Aimed at the rapid message setting of the passive systems, the efficiency of energy transmission and the characteristics of signal transmission in the message setting are analyzed, which is based on the methods of the circuit analysis and the electromagnetic induction technology. A self-adaptive impedance matching method of signal and energy transmission, which can set the message rapidly and effectively, is put forward. The electromagnetic induct setting system will reach the highest energy transmission efficiency when the equivalent resistance of the second loop is equal to the resistance of the first loop. The greater the ratio of the equivalent resistances is, the higher efficient the signal transmission has. Moreover, the validity of the method is verified by circuit design and tests.

Modelling Wave Transmission and Overtopping Based on Energy Balance Equation

Wave transmission and overtopping around nearshore breakwaters can have significant influence on the transmitted wave parameters,which affects wave conditions and sediment transportation and becomes the focus of design in engineering.The objective of this paper is to present a simplified model to estimate these important wave parameters.This paper describes the incorporation of wave transmission and overtopping module into a wave model for multi-directional random wave transformation based on energy balance equation with the consideration of wave shoaling,refraction,diffraction,reflection and breaking.Wen's frequency spectrum and non-linear dispersion relation are also included in this model.The influence of wave parameters of transmitted waves through a smooth submerged breakwater has been considered in this model with an improved description of the transmitted wave spectrum of van der Meer et al.(2000) by Carevic et al.(2013).This improved wave model has been validated through available laboratory experiments.Then the verified model is applied to investigate the effect of wave transmission and overtopping on wave heights behind low-crested breakwaters in a project for nearshore area.Numerical calculations are carried out with and without consideration of the wave transmission and overtopping,and comparison of them indicates that there is a considerable difference in wave height and thus it is important to include wave transmission and overtopping in modelling nearshore wave field with the presence of low-crested breakwaters.Therefore,this model can provide a general estimate of the desired wave field parameters,which is adequate for engineers at the preliminary design stage of low-crested breakwaters.

Reducing energy consumption optimization selection of path transmission routing algorithm in opportunistic networks

Opportunistic networks are random networks and do not communicate with each other among respective communication areas.This situation leads to great difficulty in message transfer.This paper proposes a reducing energy consumption optimal selection of path transmission(OSPT) routing algorithm in opportunistic networks.This algorithm designs a dynamic random network topology,creates a dynamic link,and realizes an optimized selected path.This algorithm solves a problem that nodes are unable to deliver messages for a long time in opportunistic networks.According to the simulation experiment,OSPT improves deliver ratio,and reduces energy consumption,cache time and transmission delay compared with the Epidemic Algorithm and Spray and Wait Algorithm in opportunistic networks.

Bidirectional secondary transmissions with energy harvesting in cognitive wireless sensor networks

To the existing spectrum sharing schemes in wireless-powered cognitive wireless sensor networks,the protocols are limited to either separate the primary and the secondary transmission or allow the secondary user to transmit signals in a time slot when it forwards the primary signal.In order to address this limitation,a novel cooperative spectrum sharing scheme is proposed,where the secondary transmission is multiplexed with both the primary transmission and the relay transmission.Specifically,the process of transmission is on a three-phase time-switching relaying basis.In the first phase,a cognitive sensor node SU1 scavenges energy from the primary transmission.In the second phase,another sensor node SU2 and primary transmitter simultaneously transmit signals to the SU1.In the third phase,the node SU1 can assist the primary transmission to acquire the opportunity of spectrum sharing.Joint decoding and interference cancellation technique is adopted at the receivers to retrieve the desired signals.We further derive the closed-form expressions for the outage probabilities of both the primary and secondary systems.Moreover,we address optimization of energy harvesting duration and power allocation coefficient strategy under performance criteria.An effective algorithm is then presented to solve the optimization problem.Simulation results demonstrate that with the optimized solutions,the sensor nodes with the proposed cooperative spectrum sharing scheme can utilize the spectrum in a more efficient manner without deteriorating the performance of the primary transmission,as compared with the existing one-directional scheme in the literature.

Effect of air breakdown on microwave pulse energy transmission

The energy transmission of the long microwave pulse for the frequency of 2.45 GHz and 5.8 GHz is studied by using the electron fluid model, where the rate coefficients are deduced from the Boltzmann equation solver named BOLSIG＋. The breakdown thresholds for different air pressures and incident pulse parameters are predicted, which show good agreement with the experimental data. Below the breakdown threshold, the transmitted pulse energy is proportional to the square of the incident electric field amplitude. When the incident electric field amplitude higher than the breakdown threshold increases,the transmitted pulse energy decreases monotonously at a high air pressure, while at a low air pressure it first decreases and then increases. We also compare the pulse energy transmission for the frequency of 2.45 GHz with the case of 5.8 GHz.

Mathematical Modeling of the Transfer of Energy Forces from the Engine through Hydro Transmission and Hydro Differential to Executive Bodies

Mathematically simulated energy transfers from the energy source to the chassis through hydro transmissions and hydro differential. The developed unified mathematical model of a dynamic system allows, at the design stage, of many branched drive mechanisms, including transmission hydraulic and hydraulic differential actuators, to explore dynamic processes and select rational parameters.

Energy control strategy for parallel hydrostatic transmission hybrid vehicles

Aimed at the relatively lower energy density and complicated coordinating operation between two power sources,a special energy control strategy is required to maximize the fuel saving potential.Then a new type of configuration for hydrostatic transmission hybrid vehicles(PHHV) and the selection criterion for important components are proposed.Based on the optimization of planet gear transmission ratio and the analysis of optimal energy distribution for the proposed PHHV on a representative urban driving cycle,a fuzzy torque control strategy and a braking energy regeneration strategy are designed and developed to realize the real-time control of energy for the proposed PHHV.Simulation results demonstrate that the energy control strategy effectively improves the fuel economy of PHHV.

An Energy-Aware Routing Protocol Based on Effective Transmission in Sensor Networks

In order to minimize the energy consumption in the discovery of the routing path, this paper introduces a novel concept of effective transmission （ET） that ensures each forwarding node is not only farther from the source node, but also nearer to the destination node with respect to its sender, An energ-aware routing protocol based on ET is proposed. It enables the energy consumption for each hop to be the least for the transmission. The simulation results show the routing protocol is effective in the performance of energy consumption comparing with some other routing protocols.