Modeling and Current Programmed Control of a Bidirectional Full Bridge DC-DC Converter

Modelling of bidirectional full bridge DC-DC converter as one of the most applicable converters has received significant attention. Mathematical modelling reduces the simulation time in comparison with detailed circuit response;moreover it is convenient for controller design purpose. Due to simple and effective methodology, average state space is the most common method among the modelling methods. In this paper a bidirectional full bridge converter is modelled by average state space and for each mode of operations a controller is designed. Attained mathematical model results are in a close agreement with detailed circuit simulation.

Design Criterion for Interleaving and Magnetically Integrated Bidirectional DC/DC Converters

双向DC/DC变换器中大功率储能电感的设计是一件困难而具有挑战性的工作,提出研究双向DC/DC变换器的交错并联磁集成理论以克服这一困难。将三相Buck＋Boost双向DC/DC变换器的所有相电感集成为一个耦合电感,对磁集成后变换器运行在Buck模式下的稳态电流纹波和暂态响应速度进行深入研究,给出三相Buck＋Boost交错并联磁集成双向DC/DC变换器运行在Buck模式下的设计准则,即在设计这种变换器时,应根据占空比的大小及稳态相电流纹波和暂态总输出电流响应速度的技术要求,利用该文所给出的设计公式和设计区域选择磁集成耦合电感的反向耦合系数。仿真和实验验证了理论分析的正确性。

Design and Analysis of a 24 Vdc to 48 Vdc Bidirectional DC-DC Converter Specifically for a Distributed Energy Application

The design of a bidirectional dc-dc power converter specifically for a distributed energy application is presented. The existing two different DC voltage battery bank of the distributed generation needs to interlink each other using a bi-directional dc-dc converter in order to minimize the unbalance of the output load currents of the three inverters connected to electric grid system. Through this connection, a current can flow from one system to another or vice versa depending on which systems need the current most. Thus, unbalanced currents of the grid line have been minimized and the reliability and performance of the DER grid connected system has been increased. A detailed mathematical analysis of the converter under steady state and transient condition are presented. Mathematical models for boost and buck modes are being derived and the simulink model is constructed in order to simulate the system. Moreover, the model has been validated on the actual operation of the converter, showing that the simulated results in Matlab Simulink are consistent with the experimental ones.

Experimental Evaluation of Medium-Voltage Cascode Gallium Nitride(GaN)Devices for Bidirectional DC-DC Converters

Wide bandgap(WBG)semiconductors,such as silicon carbide(SiC)and gallium nitride(GaN),exhibit superior physical properties and demonstrate great potential for replacing conventional silicon(Si)semiconductors with WBG technology,pushing the boundaries of power devices to handle higher blocking voltages,switching frequencies,output power levels,and operating temperatures.However,tradeoffs in switching performance and converter efficiency when substituting GaN devices for Si and SiC counterparts are not well-defined,especially in a cascode configuration.Additional research with further detailed investigation and analysis is necessitated for medium-voltage GaN devices in power converter applications.Therefore,the aim of this research is to experimentally investigate the impact of emerging 650/900 V cascode GaN devices on bidirectional dc-dc converters that are suitable for energy storage and distributed renewable energy systems.Dynamic characteristics of Si,SiC,and cascode GaN power devices are examined through the double-pulse test(DPT)circuit at different gate resistance values,device currents,and DC bus voltages.Furthermore,the switching behavior and energy loss as well as the rate of voltage and current changes over the time are studied and analyzed at various operating conditions.A 500 W experimental converter prototype is implemented to validate the benefits of cascode GaN devices on the converter operation and performance.Comprehensive analysis of the power losses and efficiency improvements for Si-based,SiC-based,and GaN-based converters are performed and evaluated as the switching frequency,working temperature,and output power level are in-creased.The experimental results reveal significant improvements in switching performance and energy efficiency from the emerging cascode GaN devices in the bidirectional converters.

An Overview of Bidirectional DC-DC Converter Topologies and Control Strategies for Interfacing Energy Storage Systems in Microgrids

A microgrid is defined as a local electric power distribution system with diverse DG （distributed generation） units, energy storage systems, and loads, which can operate as a part of the distribution system or when needed can operate in an islanded mode. Energy storage systems play a key role in improving security, stability, and power quality of the microgrid. During grid-connected mode, these storage units are charged from various DG sources as well as the main grid. During islanded mode, DG sources along with the storage units need to supply the load. Power electronic interfaces between the microgrid buses and the storage units should be able to detect the mode of operation, allow seamless transition between the modes, and allow power flow in both directions, while maintaining stability and power quality. An overview of bidirectional converter topologies relevant to microgrid energy storage application and their control strategies will be presented in this paper.

A Resonant Dual Full-Bridge Class-E Bidirectional DC-DC Converter for Fuel Cell Electric Vehicle

The interests on energy storage schemes, bidirectional dc-dc converter and uninterruptible power supplies have been increasing nowadays as there wide researches are undertaken in the area of electric vehicles. A modified bi directional class-E resonant dc-dc converter is introduced here in this proposed topology for the application in electric vehicles. The advantages of soft switching techniques have been utilized for making analysis simple. The main advantage here in this system is that it can operate in a wide range of frequencies with minimal switching loss in transistors. This paper elaborates a detailed analysis on converter design and the same has been simulated and verified in Matlab/Simulink.

Multi-Phase QR ZCS Switched-Capacitor Bidirectional Power Converter for PV System Application

The multi-phase implementation in the QR （quasi resonant） ZCS （zero current switching） SC （switched capacitor） bidirectional DC-DC converter structure has been proposed to reduce current ripple, switching loss and significantly increase the converter efficiency and power density. This approach provides a more precise output voltage to obtain voltage conversion ratios from the double-mode versus half-mode to n-mode versus 1/n mode. This is accomplished by adding a different number of switched-capacitors and power MOSFET switches with a small series connected resonant inductor for forward and reverse schemes. The size and cost can be reduced when the proposed converter has been designed with the coupled inductors. The simulation and experimental results have been used to demonstrate the performance of the two-phase with and without coupled inductor interleaved QR ZCS SC converters for bidirectional power flow control application, and an extending structure for N-phase is mentioned.

Grid-Connected PV Solar Energy Converter with Active and Reactive Power Control

This work proposes a 12 kW three-phase grid-connected single stage PWM DC-AC converter destined to process the energy provided by a photovoltaic array composed of 57 KC200GT PV modules with high power factor for any solar radiation. The PWM inverter modeling and the control strategy, using dqO transformation, are proposed in order to also allow the system operation as an active power filter, capable to compensate harmonic components and react power generated by the non-linear loads connected to the mains grid. An input voltage clamping technique is proposed to impose the photovoltaic operation on the maximum power point. Simulation and experimental results are presented to validate the proposed methodology for grid connected photovoltaic generation system.

Transient Characteristics and Accommodative Current Limiting Strategy for Bidirectional Interlinking Converters in Hybrid AC/DC Microgrids

Bidirectional interlinking converter(BIC)is the core equipment in a hybrid AC/DC microgrid connected between AC and DC sub-grids.However,the variety of control modes and flexible bidirectional power flow complicate the influence of AC faults on BIC itself and on DC sub-grid,which potentially threaten both converter safety and system reliability.This study first investigates AC fault influence on the BIC and DC bus voltage under different BIC control modes and different pre-fault operation states,by developing a mathematical model and equivalent sequence network.Second,based on the analysis results,a general accommodative current limiting strategy is proposed for BIC without limitations to specific mode or operation condition.Current amplitude is predicted and constrained according to the critical requirements to protect the BIC and relieving the AC fault influence on the DC bus voltage.Compared with conventional methods,potential current limit failure and distortions under asymmetric faults can also be avoided.Finally,experiments verify feasibility of the proposed method.

The Hybrid Bidirectional DC/DC Converter:Mutual Control and Stability Analysis

A hybrid bidirectional DC/DC converter(BDC)is proposed as the fundamental DC/DC module in solid-state transformers,which combines a bidirectional LLC converter and a dual-active-bridge(DAB)converter.Integrated with a mutual control scheme,both parts of this hybrid BDC can be unified into an interdependent community.In this hybrid BDC,the LLC converter supports the output voltage and improves stability by working at the resonant frequency mode and the DAB converter enhances the BDC power capability by controlling the LLC output current constant.The BDC can achieve the full-load-range soft switching of all active switches by designing the auxiliary inductor of LLC and the minimum output current of DAB.By comparing to the single DAB,the proposed BDC has the higher phase and gain margin which means the BDC improved the relative stability based on Nyquist criterion.To solve the bidirectional power control problem,a dead-band voltage control logic is adopted which can determine the BDC’s power direction based on the output voltage change.A 200 V experimental system has verified the aforementioned features and functions of the BDC.

High Efficiency PCS with Scan-Type MPPT Control for a Grid-Connected PV Power Generation System

For a standalone PV （photovoltaic） power generation system, the author previously proposed a new MPPT （maximum power point tracking） control method in which the I-V characteristics are scanned with a detection interval control that operates at specified intervals and monitors the maximum power point. The author has obtained satisfactory results using this new MPPT control method. This paper investigates the application of the new MPPT control method for a PCS （power conditioning system） in a grid-connected type PV power generation system. The experimental results clearly demonstrate that the developed PCS offers outstanding effectiveness in tracking the maximum power point in partially shaded environments.

Inertial PLL of Grid-connected Converter for Fast Frequency Support

Frequency support capability for the grid-connected converter(GCC)is one of the basic safeguards for the stability of renewables-dominated power systems.In this paper,analogous to the motion equation of a synchronous generator(SG),an inertial phase-locked loop(iPLL)is proposed for GCC to achieve fast frequency support.The iPLL introduces the inertial and damping loops into the classic PLL structure to emulate the natural frequency regulation characteristics of a SG.Compared with the existing methods,the iPLL has a faster frequency response and is simpler in design and implementation.Finally,the proposed iPLL method is validated by experiments.Index Terms-Frequency support,grid-connected converter,inertial phase-locked loop(iPLL),synchronous generation(SG).

Design and Implementation of Bi-Directional DC-DC Converter for Wind Energy System

This paper proposes a design and implementation of the bi-directional DC-DC converter for Wind Energy Conversion System. The proposed project consists of boost DC/DC converter, bi-directional DC/DC converter (BDC), permanent magnet DC generator and batteries. A DC-DC boost converter is interface with proposed wind system to step up the initial generator voltage and maintain constant output voltage. The fluctuation nature of wind makes them unsuitable for standalone operation. To overcome the drawbacks an energy storage device is used in the proposed system to compensate the fluctuations and to maintain a smooth and continuous power flow in all operating modes to load. Bi-directional DC-DC converter (BDC) is capable of transforming energy between two DC buses. It can operate as a boost converter which supplies energy to the load when the wind generator output power is greater than the required load power. It also operates in buck mode which charges from DC bus when output power is less than the required load power. The proposed converter reduces the component losses and increases the performance of the overall system. The complete system is implemented in MATLAB/SIMULINK and verified with hardware.

Application of non-isolated bidirectional DC-DC converters for renewable and sustainable energy systems:a review

The primary challenge in renewable-energy utilization is an energy-storage system involving its power converter.The systems have to promise high efficiency,reliability and durability.Also,all of these can be realized at an economical cost.Buck and boost converters connected in parallel can convert power in both directions.It is the basic non-isolated bidirectional topology commonly used with energy-storage systems.The primary issue with the buck-boost non-isolated bidirectional converter is how to enhance its performance,so the modification involving this topology is still conducted.This paper examines 29 proposed converters from 30 research publications published in the last 10 years,the most recent of which focuses on modified non-isolated bidirectional converters based on the buck-boost topology.These are classified into eight modification schemes,which involve adding new components or circuits to the base topology.Each is evaluated against six parameters:the number of components,control complexity,power-rating applications,soft-switching ability,efficiency outcome and capacity to minimize losses.Moreover,each modified non-isolated bidirectional converter was compared from the renewable-energy-based power-generation-source perspective utilized.Based on these studies,researchers might think of ways to improve the buck-boost converter by changing it to make a new non-isolated bidirectional converter that can be used in systems that need it.

Topology for current-source grid-connected inverter with improved effciency and pulse width modulation control strategy

A novel topology of the current-source grid-connected inverter is proposed based on the immittance converter theory. A control strategy of sine-sine pulse width modulation （PWM） is studied. Compared with the traditional current-source inverter, the power frequency inductors and power frequency transformer are replaced with high frequency inductors and a high frequency transformer. Thus, the proposed inverter has advantages of small volume, low cost, low total harmonic distortion （THD）, low power losses, high power factor （PF） and simple control. Furthermore, grid voltage cannot influence output current of the grid-connected inverter and the current-source inverter with a high PF that approaches one has been realized. Finally, validity of the theory analysis and feasibility of the control scheme are shown by simulation and experimental results.

Circulating Current Suppression Method with Adaptive Virtual Impedance for Multi-bidirectional Power Converters Under Unbalanced Conditions

Multi-paralleled bidirectional power converters(BPCs)are commonly used to improve the power capacity and reliability in an AC/DC hybrid microgrid.However,circulating current through multi-BPCs has been one of the challenges and it can be aggravated in the presence of non-ideal operating conditions,such as unbalanced AC voltages,and the mismatch of hardware parameters.In order to suppress the circulating current,this paper proposes a distributed method based on adaptive virtual impedance,which also employs positive sequence power droop control and voltage deviation compensation control.The traditional positive sequence power droop control is adopted to only regulate the positive components of the BPCs output voltage.The negative sequence power term is fed to an adaptive virtual impedance generator to modify the damping characteristics of the BPCs.Also,an adaptive virtual impedance-based voltage deviation compensation method is proposed to recover the fluctuated output voltage of the BPCs due to droop action and the power fluctuations.The fully distributed regulation of adaptive virtual impedance enables the load power to be shared accurately among BPC modules and thus the circulating current can be effectively suppressed.The proposed control strategy does not require an additional communication system and the precise parameters of hardware equipment and line impedance.Furthermore,the effectiveness of the proposed method is verified by the experimental results.

Hierarchical control for parallel bidirectional power converters of a grid-connected DC mlcrogrnd

The DC microgrid is connected to the AC utility by parallel bidirectional power converters （BPCs） to import/export large power, whose control directly affects the performance of the grid-connected DC microgrid. Much work has focused on the hierarchical control of the DC, AC, and hybrid microgrids, but little has considered the hierarchical control of multiple parallel BPCs that directly connect the DC microgrid to the AC utility. In this paper, we propose a hierarchical control for parallel BPCs of a grid-connected DC mierogrid. To suppress the potential zero-sequence circulating cm-cent in the AC side among the parallel BPCs and realize feedback linearization of the voltage control, a d-q-O control scheme instead of a conventional d-q control scheme is proposed in the inner current loop, and the square of the DC voltage is adopted in the inner voltage loop. DC side droop control is applied to realize DC current sharing among multiple BPCs at the primary control level, and this induces DC bus voltage deviation. The quantified relationship between the current sharing error and DC voltage deviation is derived, indicating that there is a trade-off between the DC voltage deviation and current sharing error. To eliminate the current sharing error and DC voltage deviation simultaneously, slope-adjusting and voltage-shifting approaches are adopted at the secondary control level. The pro- posed tertiary control realizes precise active and reactive power exchange through parallel BPCs for economical operation. The proposed hierarchical control is applied for parallel BPCs of a grid-connected DC microgrid and can operate coordinately with the control for controllable/uncontrollable distributional generation. The effectiveness of the proposed control method is verified by corresponding simulation tests based on Matlab/Simulink, and the performance of the hierarchical control is evaluated for prac- tical applications.

A Review of Isolated Bidirectional DC-DC Converters for Data Centers

In today’s fast-paced,information-driven world,data centers can offer high-speed,intricate capabilities on a larger scale owing to the ever-growing demand for networks and information systems.Because data centers process and transmit information,stability and reliability are important.Data center power supply architectures rely heavily on isolated bidirectional DC-DC converters to ensure safety and stability.For the smooth operation of a data center,the power supply must be reliable and uninterrupted.In this study,we summarize the basic principle,topology,switch conversion strategy,and control technology of the existing isolated bidirectional DC-DC converters.Subsequently,existing research results and problems with isolated bidirectional DC-DC converters are reviewed.Finally,future trends in the development of isolated bidirectional DC-DC converters for data centers are presented,which offer valuable insights for solving engineering obstacles and future research directions in the field.

基于开关电感的宽电压增益双向DC/DC变换器

此处提出了一种用于储能系统的基于开关电感的宽电压增益双向DC/DC变换器。该变换器在实现双向升降压的同时进一步扩大了双向变换器的电压增益,可以适应不同电压等级的储能电池;相同电压增益下功率器件占空比有效降低,进一步减小了输入电流纹波,有助于提高电池充电性能。分析了放电和充电两种工作模式的工作原理,并搭建实验样机进行验证。实验结果表明在输出电压稳定的工况下,该变换器放电模式可以实现0.5~5倍的电压增益,充电模式可以实现0.2~2倍的电压增益,证明了所提变换器的双向升降压能力和宽电压增益能力。

事件触发改进一致性算法的孤岛混合微电网并联互联变流器分布式协调控制策略

在交直流混合微电网中,并联互联变流器(parallel bidirectional power converters,BPCs)可以实现大容量的功率传输,以满足新型电力系统在空间上的供需匹配。如何在占用更少资源的同时协调控制BPCs实现功率的比例共享,是交直流混合微电网中BPCs控制的研究难点。因此,该文设计了一种针对BPCs的事件触发改进一致性协调控制策略。以归一化下垂控制为基础,提出了改进的比例功率一致性算法,实现BPCs间高精度比例功率共享。在此之上,基于BPCs比例功率误差建立事件触发改进一致性算法,并预设触发函数的预判阈值,从而降低系统在稳定状态下的通信次数。最后进行仿真对比分析,结果表明该文提出的方法相比基本一致性算法通信量减少98.35%;同时,与现有控制策略相比,该文提出的方法有着更好的控制性能。