Exploring University Campus Community’s Perceptions and Barriers toward Biking: A Case Study of the University of Tennessee Knoxville

Bicycling constitutes an integral component of sustainable non-motorized means of travel. Despite the immense benefits of bicycling, the modal share of bicycling is quite low, specifically among young and low-income commuters e.g., college and university students. This study explores the perceptions of and barriers to bicycling of the campus community at the University of Tennessee, Knoxville with the aim to identify the factors that could enhance bike use among students at the university campus as well as highlight the barriers that keep young population away from biking. An online survey about bike use at the university campus was administered and responses to the survey were recorded. On the methodological front, a binary logit model was estimated with students’ willingness to use bikes at campus as the dependent variable. The survey results revealed that about 47% of the students considered vehicular traffic as the reason for feeling unsafe while biking and emphasized having separate bike routes. Most of the respondents highlighted the need to change clothes after biking in summer or carry things as the reason for not selecting bikes as a mode of transport at the campus, whereas inadequate bike lanes, paths, or trails, insufficient lighting along bike routes, and the lack of adequate bicycle parking were highlighted as the major barriers deterring bike use within the campus. The study suggests development of a campus bike network with proper bike lanes, bike runnels, installation of safety cameras and better lighting at the campus, and bike-supporting infrastructure such as communal showers to be provided in campus buildings to encourage bike use among university students. The study findings can assist campus transportation planners in devising a sustainable campus transportation plan incorporating the influencing factors and deterrents of bike use in a university campus setting.

Knowledge, Attitude, and Practice of Using Helmets in Children amongst Parents to Prevent Head Injuries: A Cross-Sectional Study in Riyadh, Saudi Arabia

Objectives: The primary objective was to characterize the range of Knowledge, Attitude, and Practice (KAP) of Helmet use in children amongst parents to prevent head injuries and death. Methods: This is a cross-sectional study, done by online survey using a snowball sampling technique, the number of included responses were 386 parents (Male and female) living in Riyadh Aged 21 - 60 years old or above. Results: The study showed that there is a difference in Parents’ belief in the importance of helmet use while riding a Bicycle vs Motorcycle/Quad bike and that was affected by parents’ education level, almost all the people who answered the survey (76.7%) agree that it is important for their children to wear a helmet when riding both a Bicycle and a Motorcycle or Quadbike with a cumulative percentage of (93.8%). And almost all agreed on multiple approaches to help increase helmet use be it by forcing rental shops to give out helmets, forcing sellers to recommend the use of helmets, increasing awareness campaigns, and imposing fines for not wearing helmets. Conclusions: This study is the first to explore Family helmet use while riding Bicycles and Motorcycles/Quad bikes. Although Parent’s belief in the importance of helmet use for their children was high, it is clear that the level of practice is low. With that the risk of head injuries might be high, our findings suggest that safety interventions for increasing pediatric helmet use are needed to increase helmet use and reduce the risk of head injury and hospitalization.

Analysis of temporal and spatial usage patterns of dockless bike sharing system around rail transit station area

In order to study the spatiotemporal characteristics of the dockless bike sharing system(BSS)around urban rail transit stations,new normalized calculation methods are proposed to explore the temporal and spatial usage patterns of the dockless BSS around rail transit stations by using 5-weekday dockless bike sharing trip data in Nanjing,China.First,the rail transit station area(RTSA)is defined by extracting shared bike trips with trip ends falling into the area.Then,the temporal and spatial decomposition methods are developed and two criterions are calculated,namely,normalized dynamic variation of bikes(NDVB)and normalized spatial distribution of trips(NSDT).Furthermore,the temporal and spatial usage patterns are clustered and the corresponding geographical distributions of shared bikes are determined.The results show that four temporal usage patterns and two spatial patterns of dockless BSS are finally identified.Area type(urban center and suburb)has a great influence on temporal usage patterns.Spatial usage patterns are irregular and affected by limited directions,adjacent rail transit stations and street networks.The findings can help form a better understanding of dockless shared bike users behavior around rail transit stations,which will contribute to improving the service and efficiency of both rail transit and BSS.

Urban Mobility in Vitória in Times of Pandemics:Considerations about the Cycle Road System

Mobility is among the urban issues that most affect the population’s quality of life.The complexity inherent to mobility requires the development and application of methods and tools that enable a better understanding of their interrelationships.In this sense,the use of indicators is important for the analysis of current mobility conditions,as well as allowing the monitoring of the impact of public policies and the evolution of certain phenomena and actions.Thus,the objective is to study the cycling modal in urban mobility in the city of Vitória,Espírito Santo,during the period of the new coronavirus pandemic,through the application of two indicators:the cycling network increase and the traffic accident reduction.It is considered that the demand for the use of public transport and motor vehicles has decreased due to social isolation.The methodology includes a literature review on the studied subject;urban mobility indicators selection;data collection from public agencies;and analysis of the results.The results reveal that indicators are required to support the proposition of public policies,targeting of actions,identification of areas in need of investments and mainly can reflect the pandemic influence on urban mobility.

CAD System Dedicated to the Design of Sport Bike Frame Structure

This article aims to discuss the design process of the CAD system dedicated for sport bike frame structure, introducing in detail its design concept and the scheme of implementation. Based on the different usages of sport bikes and the requirements on the system made out by Beijing Hanglun Sport Apparatus Company Limited. Structural analysis on two types of bikes frames is carried out. The system defines the basic design parameters and analyses the constraint conditions.Then calculating formulas with constraint conditions are derived. The system solves equations with Visual C++ program, realizes input of the original data and output of the results through interactive system. With AutoCAD14.0 as the platform, the system uses VC++ and ObjectARX to realize auto output of bike frame graphics. The system has been put into use. Practice has affirmed that the system抯 convenience, applicability and reliability all have reached the expected goal.

Evaluating the Feasibility of Road Diets for Advancing Urban Mobility in Newark, DE

Road Diets are far from a new technique for designers to apply to roadways. Yet after over 50 years of implementation and countless studies into their effectiveness, it is only relatively recently that the process is gaining widespread recognition and implementation. Each year, more states and countries are examining potential road diets and putting them into place. Still, there remains great skepticism and opposition in many corners. In addition, cities and states may be drawing from many of the same sources in how to go about the process of a road diet and evaluate them, yet their methodology, goals, and even terminology can vary from region to region. This study analyzes the implementation of a road diet along a one-way arterial road, in Newark, Delaware. The primary aim of this analysis is to evaluate the feasibility of introducing a dedicated bicycle infrastructure to enhance local accessibility and to quantify its potential impacts on traffic flow, parking availability, and loading logistics within the vicinity. While the reduction of one lane could be perceived as a constraint on traffic management, the investigation revealed that E Main Street, the roadway analyzed, for the most part, can adequately accommodate its traffic load with a single lane. Detailed findings underscore the notable enhancement in level of service and subsequent reduction in delay times across most surveyed approaches.

Function Combined Method for Design Innovation of Children's Bike

As children mature, bike products for children in the market develop at the same time, and the conditions are frequently updated. Certain problems occur when using a bike, such as cycle overlapping, repeating function, and short life cycle, which go against the principles of energy conservation and the environmental protection intensive design concept. In this paper, a rational multi-function method of design through functional superposition, transformation, and technical implementation is proposed. An organic combination of frog-style scooter and children’s tricycle is developed using the multi-function method. From the ergonomic perspective, the paper elaborates on the body size of children aged 5 to 12 and effectively extracts data for a multi-function children’s bike, which can be used for gliding and riding. By inverting the body, parts can be interchanged between the handles and the pedals of the bike. Finally, the paper provides a detailed analysis of the components and structural design, body material, and processing technology of the bike. The study of Industrial Product Innovation Design provides an effective design method to solve the bicycle problems, extends the function problems, improves the product market situation, and enhances the energy saving feature while implementing intensive product development effectively at the same time.

Optimal Design and Dynamic Simulation of Mountain Bike with Rear Suspension

This paper investigates the dynamic design methodology of mountain bikes with rear suspension. Firstly, a multi-rigid body dynamic model of rider and mountain bike coupled system is constructed. The rider model includes 19 skeletons, 18 joints and 118 main muscles. Secondly, to validate the feasibility of the model, an experiment test is designed to reflect the real cycling status. Finally, aiming at enhancing the performance of the rider vibration comfort, the scale parameters of rear suspension are optimized with computer simulation and uniform design. The mathematical model in the vibration performance and the design variables is constructed with regression analysis. The result shows that when the length of side link is 90 mm, the length of connected rod is 336.115 1 mm and the included angle between absorber and side link is 60°, the mountain bike has better vibration comfort. This study and relevant conclusions are of practical importance to the design of the mountain bike＇s rear suspension system.

Mode of travel and the decision to allow children to walk or bike to schools—The Abu Dhabi experience

The study investigates school travel to and from schools as perceived by parents in Abu Dhabi, United Arab Emirates. Far fewer children are cycling or walking to school, and more and more are being driven to school by car. Traffic conditions, environmental factors, distance to school, road’s infrastructures, walking or biking with groups, schools efforts to educate children about active travel, and preferences of parents to accompany children to school were significantly perceived as important. The absence of active travel culture in the community was seen as a significant factor. Parent’s gender, child’s gender, child’s grade level, number of cars owned by the family, nationality and number of children were significantly associated with parents’ decisions to allow active travel to school. Results show that Abu Dhabi must establish aggressive strategic plans to promote active-commuting to school as the main mode of transportation. Current conditions in Abu Dhabi City are not conducive to active travel to school.

Using hybrid modeling for life cycle assessment of motor bike and electric bike

Life-cycle assessment (LCA) is environmental evaluation of products, materials, and processes over their life cycle. Truncation uncertainty and corresponding uncertainty are main problems occurred in process life cycle assessment (PLCA) modeling and economic input-output life cycle assessment (EIOLCA) modeling. Through combination of these two modelings in different life cycle stage and use of an uncertainty reduction strategy, a hybrid life cycle assessment modeling method was proposed in this study. Case studies were presented on gasoline-powered motorbikes (M-bike) and electricity-powered electric bike (E-bike). Web-based software was developed to analyze process environmental impacts. Results show that the largest part of life cycle energy (LCE) is consumed at use stage. Less energy is consumed in life cycle of E-bike than that of M-bike. GWP (Global Warming Potential), CO (Carbon Monoxide), PM10 (particulate matter) emission of M-bike are higher than that of E-bike, especially at use stage, AP (acidification Potential) emission of E-bike is higher than that of M-bike. Comprehensively, E-bike is energy efficient and less emitting, and better choice for urban private transportation.

Test Verification and Design of the Bicycle Frame Parameters

Research on design of bicycles is concentrated on mechanism and auto appearance design, however few on matches between the bike and the rider. Since unreasonable human-bike relationship leads to both riders＇ worn-out joints and muscle injuries, the design of bicycles should focus on the matching. In order to find the best position of human-bike system, simulation experiments on riding comfort under different riding postures are done with the lifemode software employed to facilitate the cycling process as well as to obtain the best position and the size function of it. With BP neural network and GA, analyzing simulation data, conducting regression analysis of parameters on different heights and bike frames, the equation of best position of human-bike system is gained at last. In addition, after selecting testers, customized bikes based on testers＇ height dimensions are produced according to the size function. By analyzing and comparing the experimental data that are collected from testers when riding common bicycles and customized bicycles, it is concluded that customized bicycles are four times even six times as comfortable as common ones. The equation of best position of human-bike system is applied to improve bikes＇ function, and the new direction on future design of bicycle frame parameters is presented.

Investigating User Ridership Sentiments for Bike Sharing Programs

Bike sharing is considered a state-of-the-art transportation program. It is ideal for short or medium trips providing riders the ability to pick up a bike at any self-serve bike station and return it to any bike station located within the system’s coverage area. The bike sharing programs in the United States are still very young compared to those in European countries. Washington DC was the first jurisdiction to devise a third generation bike sharing system in the US in 2008. To evaluate the popularity of a bike sharing program, a sentiment analysis of the riders’ feedback can be performed. Twitter is a great platform to understand people’s views instantly. Social media mining is, thus, gaining popularity in many research areas including transportation. Social media mining has two major advantages over conventional attitudinal survey methods—it can easily reach a large audience and it can reflect the true behavior of participants because of the anonymity social media provides. It is known that self-imposed censor is common in responding to conversational attitudinal surveys. This study performed text mining on the tweets related to a case study (Capital Bike share of Washington DC) to perform sentiment analysis or opinion mining. The results of the text mining mostly revealed higher positive sentiments towards the current system.

Inspiration of “Internet + Shared bike” for Healthy Exercise of University Students

As the economy and technology keep growing,the mode of shared bikes gains popularity under these circumstances.At the current period,university students become fond of using shared bikes,which changes body health and life style of university students.When this mode combines the characteristics and functions of shared bikes,it has a great impact on the awareness and motivation of work-out of university students.Supported by Internet technology,shared bikes meet the need of people that they can use them at any time,which is new and innovative to the university students.This article provides university students with shared bike service in campus by analyzing the influence of“Internet+shared bike”on health and sports of university students.It will promote the effective application of shared bikes.

纪录片《Bike与旧电钢》的美学特征分析

如何让受众从心底里接受片中的两位极具个性的艺术家,并进而发现其中所蕴含的美学思想,是纪录片《bike与旧电钢》重点解决的问题。导演邵攀从生活之美、纪实之美和情色之美三方面入手,让受众理解和接受人物生活状态,并张开发现美的眼睛。正如艺术家罗丹所说,世界中从不缺少美,而是缺少发现美的眼睛。

Contributions of the Cybathlon championship to the literature on functional electrical stimulation cycling among individuals with spinal cord injury:A bibliometric review

Background:Due to its clinically proven safety and health benefits,functional electrical stimulation(FES)cycling has become a popular exercise modality for individuals with spinal cord injury(SCI).Since its inception in 2013,the Cybathlon championship has been a platform for publicizing the potential of FES cycling in rehabilitation and exercise for individuals with SCI.This study aimed to evaluate the contribution of the Cybathlon championship to the literature on FES cycling for individuals with SCI 3 years pre and post the staging of the Cybathlon championship in 2016.Methods:Web of Science,Scopus,ScienceDirect,IEEE Xplore,and Google Scholar databases were searched for relevant studies published between January 2013 and July 2019.The quality of the included studies was objectively evaluated using the Downs and Black checklist.Results:A total of 129 articles on FES cycling were retained for analysis.A total of 51 articles related to Cybathlon were reviewed,and 14 articles were ultimately evaluated for the quality.In 2017,the year following the Cybathlon championship,Web of Science cited 23 published studies on the championship,which was almost 5-fold more than that in 2016(n=5).Training was most often reported as a topic of interest in these studies,which mostly(76.7%)highlighted the training parameters of interest to participating teams in their effort to maximize their FES cycling performance during the Cybathlon championship.Conclusion:The present study indicates that the Cybathlon championship in 2016 contributed to the number of literature published in 2017 on FES cycling for individuals with SCI.This finding may contribute to the lessons that can be learned from participation in the Cybathlon and potentially provide additional insights into research in the field of race-based FES cycling.

Life Cycle Assessment of Motor Bike and Electric Bike in Urban Areas of China

Motor bikes (m-bike) and electric bikes (e-bike) are widely used in urban areas of China. Life cycle assessment of m-bike and e-bike are presented to compare their energy use and environmental emission in a life cycle span. An m-bike and an e-bike are disassembled to collect material composition data for the life cycle assessment. The results show that e-bike consumes less energy and has less global warming potential (GWP), biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solids (SS), dissolved solids (DS), hydrocarbons (HC) than m-bike during life cycle. But e-bike generates more solid wastes, and more acidification potential (AP), heavy metal (HM) than m-bike. Advanced batteries and clean coal fired power plant technologies are recommended to promote e-bike use in urban area.

Video Analysis of Side Hop Technique in Trials

Trials is a specialty of off-road cycling in which the rider has to face obstacle courses without resting feet on the ground. Technique in this sport has a great importance, since it reduces the risk of committing penalties and allows more efficient execution of the gesture. To improve technique, the motion analysis allows to study the gesture both qualitatively and quantitatively. In this work video analysis was used to study the side hop from rear wheel technique. Two different executions of this technique were analyzed. The primary purpose is the identification of the phases that make up the technical gesture. It was given an explanation to the movement strategies adopted in the execution of the jump in the two different situations.

Self-Organized Bike Redistribution in Urban City

Bicycle is an affordable and environmental friendly alternative to private cars and public transportation. Recently, some big cities in China established the bike-sharing system (BSS) through which people can rent bikes offered by government or commercial companies. However, due to limited parking space, it is often difficult for bikers to park their bicycles in bike stations. This paper envisions approaching this problem by using a self-organized bike redistribution strategy: as time passes by, bike society will form an equilibrium state of bike redistribution.

Handling Qualities of a New Last-Mile Vehicle

This paper assesses the vehicle dynamics of a new cargo bike concept developed for euro pallet sized cargo. The cargo bike developed is for last-mile delivery. Different aspects of manoeuvrability and stability are examined using a series of manoeuvres based on tests from the automotive industry combined with bicycle industry regulations. These manoeuvres objectively evaluate and determine the handling capabilities of the cargo bike concept. Those tests can be compared using the results of the benchmark vehicles. The results conclude the new cargo bike has proper vehicle dynamics above the majority of benchmark vehicles but there is still room for improvement.