Effective development and utilization of wood resources is critical.Wood modification research has become an integral dimension of wood science research,however,the similarities between modified wood and original wood...Effective development and utilization of wood resources is critical.Wood modification research has become an integral dimension of wood science research,however,the similarities between modified wood and original wood render it challenging for accurate identification and classification using conventional image classification techniques.So,the development of efficient and accurate wood classification techniques is inevitable.This paper presents a one-dimensional,convolutional neural network(i.e.,BACNN)that combines near-infrared spectroscopy and deep learning techniques to classify poplar,tung,and balsa woods,and PVA,nano-silica-sol and PVA-nano silica sol modified woods of poplar.The results show that BACNN achieves an accuracy of 99.3%on the test set,higher than the 52.9%of the BP neural network and 98.7%of Support Vector Machine compared with traditional machine learning methods and deep learning based methods;it is also higher than the 97.6%of LeNet,98.7%of AlexNet and 99.1%of VGGNet-11.Therefore,the classification method proposed offers potential applications in wood classification,especially with homogeneous modified wood,and it also provides a basis for subsequent wood properties studies.展开更多
This paper presents a new highly parallel algorithm for computing the minimum-norm least-squares solution of inconsistent linear equations Ax = b(A∈Rm×n,b∈R (A)). By this algorithm the solution x = A + b is obt...This paper presents a new highly parallel algorithm for computing the minimum-norm least-squares solution of inconsistent linear equations Ax = b(A∈Rm×n,b∈R (A)). By this algorithm the solution x = A + b is obtained in T = n(log2m + log2(n - r + 1) + 5) + log2m + 1 steps with P=mn processors when m × 2(n - 1) and with P = 2n(n - 1) processors otherwise.展开更多
Order-recursive least-squares(ORLS)algorithms are applied to the prob-lems of estimation and identification of FIR or ARMA system parameters where a fixedset of input signal samples is available and the desired order ...Order-recursive least-squares(ORLS)algorithms are applied to the prob-lems of estimation and identification of FIR or ARMA system parameters where a fixedset of input signal samples is available and the desired order of the underlying model isunknown.On the basis of several universal formulae for updating nonsymmetric projec-tion operators,this paper presents three kinds of LS algorithms,called nonsymmetric,symmetric and square root normalized fast ORLS algorithms,respectively.As to the au-thors’ knowledge,the first and the third have not been so far provided,and the second isone of those which have the lowest computational requirement.Several simplified versionsof the algorithms are also considered.展开更多
A new hierarchical identification algorithm is proposed for solving the identi-fication problem of the extended exponential model,which is used frequently in ecological,social and economical systems.By using the zero ...A new hierarchical identification algorithm is proposed for solving the identi-fication problem of the extended exponential model,which is used frequently in ecological,social and economical systems.By using the zero character of the optimal Lagrangianmultipliers of the equivalent identification problem,a two-level structure of the algorithmis derived first.Then,the convergence and the correspondence with the conventionalnonlinear approaches of the algorithm are proved.The results of simulation and applica-tion show that its convergent rate is greatly higher than that of the L-Mmethod.展开更多
Based on the idea of the set-membership identification, a modified recursive least squares algorithm with variable gain, variable forgetting factor and resetting is presented. The concept of the error tolerance level ...Based on the idea of the set-membership identification, a modified recursive least squares algorithm with variable gain, variable forgetting factor and resetting is presented. The concept of the error tolerance level is proposed. The selection criteria of the error tolerance level are also given according to the min-max principle. The algorithm is particularly suitable for tracing time-varying systems and is similar in computational complexity to the standard recursive least squares algorithm. The superior performance of the algorithm is verified ma simulation studies on a dynamic fermentation process.展开更多
Bilinear singular systems can be used in the investigation of different types of engineering systems.In the past decade,considerable attention has been paid to analyzing and synthesizing singular bilinear systems.Thei...Bilinear singular systems can be used in the investigation of different types of engineering systems.In the past decade,considerable attention has been paid to analyzing and synthesizing singular bilinear systems.Their importance lies in their real world application such as economic,ecological,and socioeconomic processes.They are also applied in several biological processes,such as population dynamics of biological species,water balance,temperature regulation in the human body,carbon dioxide control in lungs,blood pressure,immune system,cardiac regulation,etc.Bilinear singular systems naturally represent different physical processes such as the fundamental law of mass action,the DC motor,the induction motor drives,the mechanical brake systems,aerial combat between two aircraft,the missile intercept problem,modeling and control of small furnaces and hydraulic rotary multimotor systems.The current research work discusses the Legendre Neural Network’s implementation to evaluate time-varying singular bilinear systems for finding the exact solution.The results were obtained from two methods namely the RK-Butcher algorithm and the Runge Kutta Arithmetic Mean(RKAM)method.Compared with the results attained from Legendre Neural Network Method for time-varying singular bilinear systems,the output proved to be accurate.As such,this research article established that the proposed Legendre Neural Network could be easily implemented in MATLAB.One can obtain the solution for any length of time from this method in time-varying singular bilinear systems.展开更多
In this paper,by utilizing the angle of arrivals(AOAs) and imprecise positions of the sensors,a novel modified Levenberg-Marquardt algorithm to solve the source localization problem is proposed.Conventional source loc...In this paper,by utilizing the angle of arrivals(AOAs) and imprecise positions of the sensors,a novel modified Levenberg-Marquardt algorithm to solve the source localization problem is proposed.Conventional source localization algorithms,like Gauss-Newton algorithm and Conjugate gradient algorithm are subjected to the problems of local minima and good initial guess.This paper presents a new optimization technique to find the descent directions to avoid divergence,and a trust region method is introduced to accelerate the convergence rate.Compared with conventional methods,the new algorithm offers increased stability and is more robust,allowing for stronger non-linearity and wider convergence field to be identified.Simulation results demonstrate that the proposed algorithm improves the typical methods in both speed and robustness,and is able to avoid local minima.展开更多
We construct a fuzzy varying coefficient bilinear regression model to deal with the interval financial data and then adopt the least-squares method based on symmetric fuzzy number space. Firstly, we propose a varying ...We construct a fuzzy varying coefficient bilinear regression model to deal with the interval financial data and then adopt the least-squares method based on symmetric fuzzy number space. Firstly, we propose a varying coefficient model on the basis of the fuzzy bilinear regression model. Secondly, we develop the least-squares method according to the complete distance between fuzzy numbers to estimate the coefficients and test the adaptability of the proposed model by means of generalized likelihood ratio test with SSE composite index. Finally, mean square errors and mean absolutely errors are employed to evaluate and compare the fitting of fuzzy auto regression, fuzzy bilinear regression and fuzzy varying coefficient bilinear regression models, and also the forecasting of three models. Empirical analysis turns out that the proposed model has good fitting and forecasting accuracy with regard to other regression models for the capital market.展开更多
This work describes how a control algorithm can be implemented in a small (8-bit) microcontroller for the main purpose of merging embedded systems and control theory in electrical engineering undergraduate classes. Tw...This work describes how a control algorithm can be implemented in a small (8-bit) microcontroller for the main purpose of merging embedded systems and control theory in electrical engineering undergraduate classes. Two different methods for discretizing the control expression are compared: Euler transformation and bilinear transformation. The sampling rate’s impact on the algorithm is discussed and theoretical results are verified by an application to a temperature control system in a heating plant. Four control algorithms are compared: PID and PI algorithms discretized with Euler and bilinear transformation, respectively. It is shown that for the heating plant used in this work, a bilinear PI algorithm implemented in a small 8-bit microcontroller outperforms a commercial controller from Panasonic. It is also demonstrated that all the derived algorithms can be implemented using integer calculations only, obviating the need for expensive and time-consuming floating-point calculations. This work bridges the gap between control theory equations and the implementation of control systems in small embedded systems with no inherent floating-point processing power.展开更多
In order to optimize the wood internal quality detection and evaluation system and improve the comprehensive utilization rate of wood,this paper invented a set of log internal defect detection and visualization system...In order to optimize the wood internal quality detection and evaluation system and improve the comprehensive utilization rate of wood,this paper invented a set of log internal defect detection and visualization system by using the ultrasonic dry coupling agent method.The detection and visualization analysis of internal log defects were realized through log specimen test.The main conclusions show that the accuracy,reliability and practicability of the system for detecting the internal defects of log specimens have been effectively verified.The system can make the edge of the detected image smooth by interpolation algorithm,and the edge detection algorithm can be used to detect and reflect the location of internal defects of logs accurately.The content mentioned above has good application value for meeting the requirement of increasing demand for wood resources and improving the automation level of wood nondestructive testing instruments.展开更多
基金This study was supported by the Fundamental Research Funds for the Central Universities(No.2572023DJ02).
文摘Effective development and utilization of wood resources is critical.Wood modification research has become an integral dimension of wood science research,however,the similarities between modified wood and original wood render it challenging for accurate identification and classification using conventional image classification techniques.So,the development of efficient and accurate wood classification techniques is inevitable.This paper presents a one-dimensional,convolutional neural network(i.e.,BACNN)that combines near-infrared spectroscopy and deep learning techniques to classify poplar,tung,and balsa woods,and PVA,nano-silica-sol and PVA-nano silica sol modified woods of poplar.The results show that BACNN achieves an accuracy of 99.3%on the test set,higher than the 52.9%of the BP neural network and 98.7%of Support Vector Machine compared with traditional machine learning methods and deep learning based methods;it is also higher than the 97.6%of LeNet,98.7%of AlexNet and 99.1%of VGGNet-11.Therefore,the classification method proposed offers potential applications in wood classification,especially with homogeneous modified wood,and it also provides a basis for subsequent wood properties studies.
基金This project is supported by the National Natural Science Foundation of China
文摘This paper presents a new highly parallel algorithm for computing the minimum-norm least-squares solution of inconsistent linear equations Ax = b(A∈Rm×n,b∈R (A)). By this algorithm the solution x = A + b is obtained in T = n(log2m + log2(n - r + 1) + 5) + log2m + 1 steps with P=mn processors when m × 2(n - 1) and with P = 2n(n - 1) processors otherwise.
文摘Order-recursive least-squares(ORLS)algorithms are applied to the prob-lems of estimation and identification of FIR or ARMA system parameters where a fixedset of input signal samples is available and the desired order of the underlying model isunknown.On the basis of several universal formulae for updating nonsymmetric projec-tion operators,this paper presents three kinds of LS algorithms,called nonsymmetric,symmetric and square root normalized fast ORLS algorithms,respectively.As to the au-thors’ knowledge,the first and the third have not been so far provided,and the second isone of those which have the lowest computational requirement.Several simplified versionsof the algorithms are also considered.
文摘A new hierarchical identification algorithm is proposed for solving the identi-fication problem of the extended exponential model,which is used frequently in ecological,social and economical systems.By using the zero character of the optimal Lagrangianmultipliers of the equivalent identification problem,a two-level structure of the algorithmis derived first.Then,the convergence and the correspondence with the conventionalnonlinear approaches of the algorithm are proved.The results of simulation and applica-tion show that its convergent rate is greatly higher than that of the L-Mmethod.
文摘Based on the idea of the set-membership identification, a modified recursive least squares algorithm with variable gain, variable forgetting factor and resetting is presented. The concept of the error tolerance level is proposed. The selection criteria of the error tolerance level are also given according to the min-max principle. The algorithm is particularly suitable for tracing time-varying systems and is similar in computational complexity to the standard recursive least squares algorithm. The superior performance of the algorithm is verified ma simulation studies on a dynamic fermentation process.
文摘Bilinear singular systems can be used in the investigation of different types of engineering systems.In the past decade,considerable attention has been paid to analyzing and synthesizing singular bilinear systems.Their importance lies in their real world application such as economic,ecological,and socioeconomic processes.They are also applied in several biological processes,such as population dynamics of biological species,water balance,temperature regulation in the human body,carbon dioxide control in lungs,blood pressure,immune system,cardiac regulation,etc.Bilinear singular systems naturally represent different physical processes such as the fundamental law of mass action,the DC motor,the induction motor drives,the mechanical brake systems,aerial combat between two aircraft,the missile intercept problem,modeling and control of small furnaces and hydraulic rotary multimotor systems.The current research work discusses the Legendre Neural Network’s implementation to evaluate time-varying singular bilinear systems for finding the exact solution.The results were obtained from two methods namely the RK-Butcher algorithm and the Runge Kutta Arithmetic Mean(RKAM)method.Compared with the results attained from Legendre Neural Network Method for time-varying singular bilinear systems,the output proved to be accurate.As such,this research article established that the proposed Legendre Neural Network could be easily implemented in MATLAB.One can obtain the solution for any length of time from this method in time-varying singular bilinear systems.
基金Supported by the National High Technology Research and Development Programme of China(No.2011AA7014061)
文摘In this paper,by utilizing the angle of arrivals(AOAs) and imprecise positions of the sensors,a novel modified Levenberg-Marquardt algorithm to solve the source localization problem is proposed.Conventional source localization algorithms,like Gauss-Newton algorithm and Conjugate gradient algorithm are subjected to the problems of local minima and good initial guess.This paper presents a new optimization technique to find the descent directions to avoid divergence,and a trust region method is introduced to accelerate the convergence rate.Compared with conventional methods,the new algorithm offers increased stability and is more robust,allowing for stronger non-linearity and wider convergence field to be identified.Simulation results demonstrate that the proposed algorithm improves the typical methods in both speed and robustness,and is able to avoid local minima.
文摘We construct a fuzzy varying coefficient bilinear regression model to deal with the interval financial data and then adopt the least-squares method based on symmetric fuzzy number space. Firstly, we propose a varying coefficient model on the basis of the fuzzy bilinear regression model. Secondly, we develop the least-squares method according to the complete distance between fuzzy numbers to estimate the coefficients and test the adaptability of the proposed model by means of generalized likelihood ratio test with SSE composite index. Finally, mean square errors and mean absolutely errors are employed to evaluate and compare the fitting of fuzzy auto regression, fuzzy bilinear regression and fuzzy varying coefficient bilinear regression models, and also the forecasting of three models. Empirical analysis turns out that the proposed model has good fitting and forecasting accuracy with regard to other regression models for the capital market.
文摘This work describes how a control algorithm can be implemented in a small (8-bit) microcontroller for the main purpose of merging embedded systems and control theory in electrical engineering undergraduate classes. Two different methods for discretizing the control expression are compared: Euler transformation and bilinear transformation. The sampling rate’s impact on the algorithm is discussed and theoretical results are verified by an application to a temperature control system in a heating plant. Four control algorithms are compared: PID and PI algorithms discretized with Euler and bilinear transformation, respectively. It is shown that for the heating plant used in this work, a bilinear PI algorithm implemented in a small 8-bit microcontroller outperforms a commercial controller from Panasonic. It is also demonstrated that all the derived algorithms can be implemented using integer calculations only, obviating the need for expensive and time-consuming floating-point calculations. This work bridges the gap between control theory equations and the implementation of control systems in small embedded systems with no inherent floating-point processing power.
文摘In order to optimize the wood internal quality detection and evaluation system and improve the comprehensive utilization rate of wood,this paper invented a set of log internal defect detection and visualization system by using the ultrasonic dry coupling agent method.The detection and visualization analysis of internal log defects were realized through log specimen test.The main conclusions show that the accuracy,reliability and practicability of the system for detecting the internal defects of log specimens have been effectively verified.The system can make the edge of the detected image smooth by interpolation algorithm,and the edge detection algorithm can be used to detect and reflect the location of internal defects of logs accurately.The content mentioned above has good application value for meeting the requirement of increasing demand for wood resources and improving the automation level of wood nondestructive testing instruments.
