Effect analysis of biomineralization for solidifying desert sands

The sand-dust weather has become an environmental hazard in the world.However,it is still a challenge to control sandstorms and decrease sand-dust weather.The biomineralization technology for solidifying desert sands has been developed as a novel method in recent years.In this study,the wind erosion tests and verification tests of the sand solidification system were conducted via a series of laboratory experiments.The effects of sand barriers,injecting volume and concentration of the biochemical solution in the sandstorm protection were studied.Moreover,a field test of 60,000 square metres was conducted in the solidification area on both sides of the Wuma Highway in the Tengri Desert.The biomineralization technique was used to solidify sand to prevent the wind from blowing quicksand onto the newly built highway and causing accidents.Results demonstrated that the biomineralization sand solidification method had a good solidification==effect,improved the survival rate,and promoted the growth of plants in the desert.This innovative biomineralization technology is an environmentally responsible technology to control sandstorm disasters.

Biomineralization of soil with crude soybean urease using different calcium salts

Calcium salt is an important contributing factor for calcium-based biomineralization.To study the effect of calcium salt on soil biomineralization using crude soybean urease,the calcium salts,including the calcium chloride (CaCl_(2)),calcium acetate ((CH_(3)COO)_(2)Ca) and calcium nitrate (Ca(NO_(3))_(2)),were used to prepare the biotreatment solution to carry out the biomineralization tests in this paper.Two series of biomineralization tests in solution and sand column,respectively,were conducted.Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were performed to determine the microscopic characteristics of the precipitated calcium carbonate (CaCO_(3)) crystals.The experimental results indicate that the biomineralization effect is the best for the CaCl2 case,followed by (CH_(3)COO)_(2)Ca,and worst for Ca(NO_(3))_(2) under the test conditions of this study (i.e.1 mol/L of calcium salt-urea).The mechanism for the effect of the calcium salt on the biomineralization of crude soybean urease mainly involves: (1) inhibition of urease activity,and (2) influence on the crystal size and morphology of CaCO_(3).Besides Ca^(2+) ,the anions in solution can inhibit the activity of crude soybean urease,and NO_(3)− has a stronger inhibitory effect on the urease activity compared with both CH_(3)COO^(−) and Cl^(−) .The co-inhibition of Ca^(2+) and NO_(3)− on the activity of urease is the key reason for the worst biomineralization of the Ca(NO_(3))_(2) case in this study.The difference in biomineralization between the CaCl_(2) and (CH_(3)COO)_(2) Ca cases is strongly correlated with the crystal morphology of the precipitated CaCO_(3).

Biomimetic biomineralization nanoplatform-mediated differentiation therapy and phototherapy for cancer stem cell inhibition and antitumor immunity activation

Growing evidence suggests that the presence of cancer stem cells(CSCs)is a major challenge in current tumor treatments,especially the transition from non-CSCs to differentiation of CSCs for evading conventional therapies and driving metastasis.Here we propose a therapeutic strategy of synergistic differentiation therapy and phototherapy to induce differentiation of CSCs into mature tumor cells by differentiation inducers and synergistic elimination of them and normal cancer cells through phototherapy.In this work,we synthesized a biomimetic nanoplatform loaded with IR-780 and all-trans retinoic acid(ATRA)via biomineralization.This method can integrate aluminum ions into small-sized protein carriers to form nanoclusters,which undergo responsive degradation under acidic conditions and facilitate deep tumor penetration.With the help of CSC differentiation induced by ATRA,IR-780 inhibited the self-renewal of CSCs and cancer progression by generating hyperthermia and reactive oxygen species in a synergistic manner.Furthermore,ATRA can boost immunogenic cell death induced by phototherapy,thereby strongly causing a systemic anti-tumor immune response and efficiently eliminating CSCs and tumor cells.Taken together,this dual strategy represents a new paradigm of targeted eradication of CSCs and tumors by inducing CSC differentiation,improving photothermal therapy/photodynamic therapy and enhancing antitumor immunity.

Recent Advances in Computational Simulation of Macro-,Meso-,and Micro-Scale Biomimetics Related Fluid Flow Problems

Over the last decade, computational methods have been intensively applied to a variety of scientific researches and engineering designs. Although the computational fluid dynamics （CFD） method has played a dominant role in studying and simulating transport phenomena involving fluid flow and heat and mass transfers, in recent years, other numerical methods for the simulations at meso- and micro-scales have also been actively applied to solve the physics of complex flow and fluid-interface interactions. This paper presents a review of recent advances in multi-scale computational simulation of biomimetics related fluid flow problems. The state-of-the-art numerical techniques, such as lattice Boltzmann method （LBM）, molecular dynamics （MD）, and conventional CFD, applied to different problems such as fish flow, electro-osmosis effect of earthworm motion, and self-cleaning hydrophobic surface, and the numerical approaches are introduced. The new challenging of modelling biomimetics problems in developing the physical conditions of self-clean hydrophobic surfaces is discussed.

The Concept of Electroosmotically Driven Flow and Its Application to Biomimetics

The concept of electroosmotically driven flow is built around understanding how the ionized particles or fluid are driven to flow by electroosmosis forces. Apart from the major applications of this concept to micro flow control elements which have been explored in parallel with the rapid developments in micro fabrication technologies, the present focus is on its application to biomimetics. As soil animals (in fact all living creatures) such as earthworms and dung beetles carry bioelectricity, the relative movement between the creatures and the surrounding soil which is a multi-component medium with moist content will generate electrophoresis or electroosmosis forces. Such forces drive the ionized moist content, normally water, to migrate from positive to negative poles under the action of electric double layer (EDL) effect, and effectively reduce the adhesion or drag.Predicting the electroosmotically driven flow in the vicinity of biological and animal surfaces is a key problem of drag/adhesion reduction and biomimetics design. The aim of this article is to demonstrate how the theory of electroosmotically driven flow has developed and to describe its broader significance for anti adhesion of soil animals and biomimetics design of soil machinery tools.

Biomineralization of Uranium: A Simulated Experiment and Its Significance

A simulated experimental reduction of and the synthesis of uraninite by a sulfate-reducing bacteria, Desulfovibrio desulfuricans DSM 642, are first reported. The simulated physicochemical experimental conditions were: 35°C, pH=7.0-7.4, corresponding to the environments of formation of the sandstone-hosted interlayer oxidation-zone type uranium deposits in Xinjiang, NW China. Uraninite was formed on the surface of the host bacteria after a one-week's incubation. Therefore, sulfate-reducing bacteria, which existed extensively in Jurassic sandstone-producing environments, might have participated in the biomineralization of this uranium deposit. There is an important difference in the order- disorder of the crystalline structure between the uraninite produced by Desulfovibrio desulfuricans and naturally occurring uraninite. Long time and slow precipitation and growth of uraninite in the geological environment might have resulted in larger uraninite crystals, with uraninite nanocrystals arranged in order, whereas the experimentally produced uraninite is composed of unordered uraninite nanocrystals which, in contrast, result from the short time span of formation and rapid precipitation and growth of uraninite. The discovery has important implications for understanding genetic significance in mineralogy, and also indicates that in-situ bioremediation of U-contaminated environments and use of biotechnology in the treatment of radioactive liquid waste is being contemplated.

3D Modelling of Biological Systems for Biomimetics

With the advanced development of computer-based enabling technologies, many engineering, medical, biology, chemistry, physics and food science etc have developed to the unprecedented levels, which lead to many research and development interests in various multi-discipline areas. Among them, biomimetics is one of the most promising and attractive branches of study. Biomimetics is a branch of study that uses biological systems as a model to develop synthetic systems. To learn from nature, one of the fundamental issues is to understand the natural systems such animals, insects, plants and human beings etc. The geometrical characterization and representation of natural systems is an important fundamental work for biomimetics research. 3D modeling plays a key role in the geometrical characterization and representation, especially in computer graphical visualization. This paper firstly presents the typical procedure of 3D modelling methods and then reviews the previous work of 3D geometrical modelling techniques and systems developed for industrial, medical and animation applications. Especially the paper discusses the problems associated with the existing techniques and systems when they are applied to 3D modelling of biological systems. Based upon the discussions, the paper proposes some areas of research interests in 3D modelling of biological systems and for Biomimetics.

Biomineralization of the Surface of PLGA-(ASP-PEG) Modified with the K_(16) and RGD-containing Peptide

K16 and RGD-containing peptide was used to modify the surface of three-dimensional PLGA-（ASP-PEG） matrix, then the modified PLGA-（ASP-PEG） was incubated in modified simulated body fluid （SBF）. The biomineralization of the modified PLGA- （ASP-PEG） was explored, and the peptide was synthesized with solid phase synthesis technology and linked cova-lently to PLGA-（ASP-PEG） through cross-linker （Sulfo-LC-SPDP）, which was characterized with XPS. The modified PLGA-（ASP-PEG） （Experiment group, EG） and PLGA-（ASP-PEG） （Control group, CG） were all incubated into SBF for 10 d, and the growth of hydroxyapatite （HA） nanocrys-tals was confirmed with XRD, EDS and SEM. HPLC shows that peptide purity is 94.13%, while MS analysis shows that molecular value of peptide is 2741.26. Binding energy of the sulphur in EG was 164 eV is detected by XPS, and the ratio of carbon and sulphur is 99.746：0.1014. SEM analysis demonstrates the better growth of bonelike HA nanocrystals in EG than that in CG. The component of mineral in EG consisted mainly of hydroxyapatite containing low crystalline nanocrystals, and the Ca/P ratio is about 1.60, which is similar to that of natural bone, while the Ca/P ratio in CG is 1.52. PLGA-（ASP-PEG） modified with peptide provided enough functional groups for biomineralization, and possessed the bonelike structure.

Biomineralization in the La' erma Gold Deposit of the Western Qinling Mountains

Geological and geochemical studies and experiments on mineralization indicate that the source bed of the La' erma gold deposit in the south subbelt of the western Qinling Mountains is hydrothermal cherts in the Cambrian Taiyangding Group. Organic geochemical study of the cherts shows that the organic precursors intimately associated with gold are marine bacteria and algae. The gold content in chert,is positively correlated with the amount of bacterial and algal microfossils, and simulation experiments on biomineralization of modern bacteria and algae indicate that bacteria and algae played an important role in the formation of the La' erma gold deposit.

Redox control of magnetosome biomineralization

Magnetotactic bacteria can orientate in the Earth’s magnetic field to search for their preferred microoxic environments,which is achieved by their unique organelles,the magnetosomes.Magnetosomes contain nanometer-sized crystal particles of magnetic iron minerals,which are only synthesized in lowoxygen environments.Although the mechanism of aerobic repression for magnetosome biomineralization has not yet fully understood,a series of studies have verified that redox modulation is pivotal for magnetosome formation.In this review,these advances in redox modulation for magnetosome biosynthesis are highlighted,mainly including respiration pathway enzymes,specific magnetosome-associated redox proteins,and oxygen-or nitrate-sensing regulators.Furthermore,their relationship during magnetosome biomineralization is discussed to give insight into redox control and biomineralization and inspire potential solutions for the application of respiration pathways to improve the yields of magnetosome.

Hot-Water Deposition of Pyritic Stromatolite and Its Relation to Biomineralization

Pyritic stromatolite, a rich pyrite ore, is scattered as reef masses in sedex deposits of the Proterozoic Yanshan rift trough. The pyritic stromatolite consists of a core and alternating concentric rims of light colloidal pyrite and dark organic materials. The concentric rims are cemented together by trichomes highly similar to the trichomic microorganisms inhabiting substantively around the black chimneys on the current sea beds while the core is composed chiefly of groups of thermophilous sulphur bacteria. Biomarkers for the molecules of pyritic stromatolite include pristane, phytane, regular isoprenoids paraffin, methyl-heptadecyl, and so on. This study reveals the existence of methane-yielding bacteria in the pyritic stromatolite and reflects the evolution of thermophilous thallophyta.

Biomineralization of Zinc-Phosphate-Based Nano Needles by Living Microalgae

Up to now, chemical synthesis routes only provide restricted opportunities for the formation of structured nano particles. In contrast, living microorganisms generate nano materials of well defined shapes by the precise control of biomineralization. Here we reveal new principles for the generation of functional nano materials through the process of biomineralization. We used the detoxification mechanism of the unicellular alga Scenedesmus obliquus to generate a techno logically interesting zinc-phosphate-based nano material. The algae were incubated in media with a sublethal zinc concentration (6.53 mg Zn dm-3) for 4 weeks. Using BF-and ADF-STEM imaging combined with analytical XEDS we could show that nano needles containing phosphorus and zinc were formed inside the living cells. Further more, the cells incubated with zinc show a strong fluorescence. Our findings indicate that the algae used polyphosphate bodies for detoxification of the zinc ions, leading to the generation of intracellular zinc-phosphate-based nano needles. Beside the technological application of this material, the fluorescent cells can be used for labeling of e.g. biological probes. This new experimental protocol for the production of an inorganic functional material can be applied also for other substances.

Does acid pickling of Mg-Ca alloy enhance biomineralization?

The mechanical and physical properties of biodegradable magnesium(Mg)alloys make them suitable for temporary orthopaedic implants.The success of these alloys depends on their performance in the physiological environment.In the present work,surface modification of Mg-Ca binary alloy by acid pickling for better biomineralization and controlled biodegradation is explored.The corrosion rates of nitric and phosphoric acid treated samples were analysed by conducting electrochemical corrosion tests.In vitro degradation behaviour was studied using immersion test in simulated body fluid(SBF).The sample surfaces were characterized using scanning electron microscope(SEM),energy dispersive X-ray spectroscopy(EDS),Fourier transform infrared spectroscopy(FTIR)and X-ray photoelectron spectroscopy(XPS).It is seen that acid pickling leads to significant improvement in biomineralization and develop in situ calcium phosphate(Ca P)coating on the sample surfaces.In addition,the treated samples recorded a reduced degradation rate in the SBF compared to untreated samples.Thus,acid pickling is suggested as an effective surface treatment method to tailor the biomineralization and degradation behaviour of the Mg-Ca alloy in the physiological environment.

Biomineralization Precursor Carrier System Based on Carboxyl- Functionalized Large Pore Mesoporous Silica Nanoparticles

Bone and teeth are derived from intrafibrillarly mineralized collagen fibrils as the second level of hierarchy.According to polymer-induced liquid-precursor process,using amorphous calcium phosphate precursor(ACP)is able to achieve intrafibrillar mineralization in the case of bone biomineral in vitro.Therefore,ACP precursors might be blended with any osteoconductive scaffold as a promising bone formation supplement for in-situ remineralization of collagens in bone.In this study,mesoporous silica nanoparticles with carboxyl-functionalized groups and ultra large-pores have been synthesized and used for the delivery of liquid like biomimetic precursors(ACP).The precursor delivery capacity of the nanoparticles was verified by the precursor release profile and successful mineralization of 2D and 3D collagen models.The nanoparticles could be completely degraded in 60 days and exhibited good biocompatibility as well.The successful translational strategy for biomineralization precursors showed that biomineralization precursor laden ultra large pore mesoporous silica possessed the potential as a versatile supplement in demineralized bone formation through the induction of intrafibrillar collagen mineralization.

Remnants of an Powerful Ancient “Dynasty”:Material Cycle and Biomineralization in Modern Seafloor Hydrothermal System

The origin of ancient banded iron formation （BIF） has remained unclear for a long time. How the precipitation process occurred and what the environmental condition was have been widely discussed among scientists, because the period when the major BIFs deposited （-2.8 to 1.8Ga） is the same time when biosphere and atmosphere significantly changed. Based on the discovery of modern seafloor hydrothermal vents, it is possible that reductive environment controlled by vent system is related to the environment where BIF was deposited. According to matter source.

A Chicken's Egg as a Reaction Vessel to Explore Biomineralization

Natural composites, formed through biomineralization, have highly ordered structures which have been aptly explored for functional applications. Though the role of organic phases has been well understood in biomineralization, not enough attention has been paid to the role of bio-membranes which are often found encapsulating the chamber in which mineralization occurs. We have used the natural protein and semi-permeable membrane of chicken eggs to grow different materials such as ceramics, semi-metals and metals to understand the role of bio-membranes in biomineralization. We here report the successful biomimetic synthesis of calcite, cadmium sulphide, and silver having homogeneous morphologies. We have found that the membrane operates like a tuned gateway, playing a significant role in controlling the morphology of the inorganic crystals formed during biomineralization.

In Vitro Biomineralization of Glutaraldehyde Crosslinked Chitosan/Glutamic Acid Films

In vitro biomineralization of glutaraldehyde crosslinked chitosan/glutamic acid films were studied. IR and ESCA （electron spectroscopy for chemical analysis） determinations confirm that chitosan and glutamic acid are successfully crosslinked by glutaraldehyde to form chitosan-glutamic acid surfaces. Composite films were soaked in saturated Ca（OH）2 solution for 8 d and then immersed in simulated body fluid （SBF） for more than 20 d. Morphological characterizations and structure of cal-cium phosphate coatings deposited on the films were studied by SEM, XRD, and EDAX （energy dispersive X-ray analysis）. Initially, the treatment in SBF results in the formation of single-layer cal-cium phosphate particles over the film surface. As immersion time increases, further nucleation and growth produce the simulated calcium-carbonate hydroxyapatite coating. ICP results show Ca/P ratio of calcium phosphate coating is a function of SBF immersion time. The inducing of glutamic acid improves the biomineralization property of chitosan films.

In vivo and in vitro biomineralization in the presence of the inner-shell film of pearl oyster

The inner shell surface is the biomineralization site in shell formation and an inner-shell film covers it. This surface is composed of two regions： an outer calcitic region and an inner aragonitic region. In this study, some amalgamated calcite crystals were found in the calcitic region and some aragonitic ＂imprints＂ were found in the central part of the aragonitic region. The ＂imprints＂ are probably the trace of mantle cells that adhered to the inner shell surface when the shell was produced. Furthermore, to build a novel in vitro biomineralization system, the inner-shell film was detached from the shell and introduced to the calcitic crystallization solution. Crystallization experiments showed that nacre proteins could induce aragonite crystals in the novel system but inhibited calcite growth in the absence of the inner-shell film. These data suggested that the inner-shell film may induce aragonite growth in vivo by combining nacre proteins.

Adaptation of a Biomineralization Strategy for Remineralization of Enamel and Dentin

The bio- inspired strategy of triggered release of Ca^2＋ , Pi, F from prosomal compartments was used to induce rapid formation of FHA for potential dental use ： Calcium and inorganic phosphate salts were separately loaded into temperature-sensitive liposome composed of 90% DPPC and 10% DMPC. When heated from the room temperature to 35- 37 ℃ , the entrapped calcium, inorganic phosphate and fl^rin released from the liposome,A mixture of Ca- Pi and F-loaded liposome formed apatite. The mineral was indicated by a rapid drop in suspension PH from 7.4 approximately 6. This was illustrated by applying a liposome suspension warmed human dentin and enamel surface which resulted in deposition of apatite onto the tissue substrates.

In Vitro Biomineralization of Glutaraldehyde Crosslinked Chitosan Films

The biomimetic approach was applied to study the in vitro biomineralization of series of the chitosan films crosslinked by glutaraldehyde. The deposited calcium phosphate coatings were studied using scanning electron microscopy and energy dispersive X-ray analysis. Initially, the treatment in simulated body fluid (SBF) results in the formation of single layer of calcium phosphate particles over the film surface. As immersion time in SBF increases, further nucleation and growth produce a simulated calcium phosphate coating. The Ca/P molar ratio of the calcium phosphate increases with the immersion time, showing a rapid formation of calcium-deficient phosphate material from the phase of octac1alcium phosphate. The different glutaraldehyde crosslinking degree influences the morphology and magnitude of the calcium phosphate coatings on the surface of the chitosan films.