Using bipolar membrane electrodialysis to synthesize di-quaternary ammonium hydroxide and optimization design by response surface methodology

Bipolar membrane electrodialysis(BMED) has already been described for the preparation of quaternary ammonium hydroxide. However, compared to quaternary ammonium hydroxide, di-quaternary ammonium hydroxide has raised great interest due to its high thermal stability and good oriented performance.In order to synthesize N,N-hexamethylenebis(trimethyl ammonium hydroxide)(HM(OH)_2) by EDBM,experiments designed by response surface methodology were carried out on the basis of single-factor experiments. The factors include current density, feed concentration and flow ratio of each compartment(feed compartment: base compartment: acid compartment: buffer compartment). The relationship between current efficiency and the above-mentioned three factors was quantitatively described by a multivariate regression model. According to the results, the feed concentration was the most significant factor and the optimum conditions were as follows: the current efficiency was up to 76.2%(the hydroxide conversion was over 98.6%), with a current density of 13.15 m A·cm^(-2), a feed concentration of 0.27 mol·L^(-1) and a flow ratio of 20 L·h^(-1):26 L·h^(-1):20 L·h^(-1):20 L·h^(-1) for feed compartment, base compartment, acid compartment, and intermediate compartment, respectively. This study demonstrates the optimized parameters of manufacturing HM(OH)_2 by direct splitting its halide for industrial application.

Bipolar membrane electrodialysis integrated with in-situ CO_(2)absorption for simulated seawater concentrate utilization,carbon storage and production of sodium carbonate

In the context of carbon capture,utilization,and storage,the high-value utilization of carbon storage presents a significant challenge.To address this challenge,this study employed the bipolar membrane electrodialysis integrated with carbon utilization technology to prepare Na_(2)CO_(3)products using simulated seawater concentrate,achieving simultaneous saline wastewater utilization,carbon storage and high-value production of Na_(2)CO_(3).The effects of various factors,including concentration of simulated seawater concentrate,current density,CO_(2)aeration rate,and circulating flow rate of alkali chamber,on the quality of Na_(2)CO_(3)product,carbon sequestration rate,and energy consumption were investigated.Under the optimal condition,the CO_(3)^(2-)concentration in the alkaline chamber reached a maximum of 0.817 mol/L with 98 mol%purity.The resulting carbon fixation rate was 70.50%,with energy consumption for carbon sequestration and product production of 5.7 k Whr/m^(3)CO_(2)and1237.8 k Whr/ton Na_(2)CO_(3),respectively.This coupling design provides a triple-win outcome promoting waste reduction and efficient utilization of resources.

Multistage-batch bipolar membrane electrodialysis for base production from high-salinity wastewater

Bipolar membrane electrodialysis(BMED)is considered a state-of-the-art technology for the conversion of salts into acids and bases.However,the low concentration of base generated from a traditional BMED process may limit the viability of this technology for a large-scale application.Herein,we report an especially designed multistage-batch(two/three-stage-batch)BMED process to increase the base concentration by adjusting different volume ratios in the acid(Vacid),base(Vbase),and salt compartments(Vsalt).The findings indicated that performance of the two-stage-batch with a volume ratio of Vacid:Vbase:Vsalt=1:1:5 was superior in comparison to the threestage-batch with a volume ratio of Vacid:Vbase:Vsalt=1:1:2.Besides,the base concentration could be further increased by exchanging the acid produced in the acid compartment with fresh water in the second stage-batch process.With the two-stage-batch BMED,the maximum concentration of the base can be obtained up to 3.40 mol∙L^(-1),which was higher than the most reported base production by BMED.The low energy consumption and high current efficiency further authenticate that the designed process is reliable,cost-effective,and more productive to convert saline water into valuable industrial commodities.