A progress review of black carbon deposition on Arctic snow and ice and its impact on climate change

The rapid warming of the Arctic,accompanied by glacier and sea ice melt,has significant consequences for the Earth’s climate,ecosystems,and economy.Black carbon(BC)deposition on snow and ice can trigger a significant reduction in snow albedo and accelerate melting of snow and ice in the Arctic.By reviewing the published literatures over the past decades,this work provides an overview of the progress in both the measurement and modeling of BC deposition and its impact on Arctic climate change.In summary,the maximum value of BC deposition appears in the western Russian Arctic(26 ng·g^(–1)),and the minimum value appears in Greenland(3 ng·g^(–1)).BC records in the Arctic ice core already peaked in 1920s and 1970s,and shows a regional difference between Greenland and Canadian Arctic.The different temporal variations of Arctic BC ice core records in different regions are closely related to the large variability of BC emissions and transportation processes across the Arctic region.Model simulations usually underestimate the concentration of BC in snow and ice by 2–3 times,and cannot accurately reflect the seasonal and regional changes in BC deposition.Wet deposition is the main removal mechanism of BC in the Arctic,and observations show different seasonal variations in BC wet deposition in Ny-Ålesund and Barrow.This discrepancy may result from varying contributions of anthropogenic and biomass burning(BB)emissions,given the strong influence by BC from BB emissions at Barrow.Arctic BC deposition significantly influences regional climate change in the Arctic,increasing fire activities in the Arctic have made BB source of Arctic BC more crucial.On average,BC in Arctic snow and ice causes an increase of+0.17 W·m^(–2)in radiative forcing and 8 Gt·a^(–1)in runoff in Greenland.As stressed in the latest Arctic Monitoring and Assessment Programme report,reliable source information and long-term and high-resolution observations on Arctic BC deposition will be crucial for a more comprehensive understanding and a better mitigation strategy of Arctic BC.In the future,it is necessary to collect more observations on BC deposition and the corresponding physical processes(e.g.,snow/ice melting,surface energy balance)in the Arctic to provide reliable data for understanding and clarifying the mechanism of the climatic impacts of BC deposition on Arctic snow and ice.

Ash removal from inferior coal via ammonium fluoride roasting and simultaneous yield of white carbon black

The quality upgrading and deashing of inferior coal by chemical method still faces great challenges.The dangers of strong acid,strong alkali,waste water and exhaust gas as well as high cost limit its industrial production.This paper systematically investigates the ash reduction and desilicification of two typical inferior coal utilizing ammonium fluoride roasting method.Under the optimal conditions,for fat coal and gas coal,the deashing rates are 69.02%and 54.13%,and the desilicification rates are 92.64%and 90.27%,respectively.The molar dosage of ammonium fluoride remains consistent for both coals;however,the gas coal,characterized by a lower ash and silica content(less than half that of the fat coal),achieves optimum deashing effect at a reduced time and temperature.The majority of silicon in coal transforms into gaseous ammonium fluorosilicate,subsequently preparing nanoscale amorphous silica with a purity of 99.90%through ammonia precipitation.Most of the fluorine in deashed coal are assigned in inorganic minerals,suggesting the possibility of further fluorine and ash removal via flotation.This research provides a green and facile route to deash inferior coal and produce nano-scale white carbon black simultaneously.

Black carbon and polycyclic aromatic hydrocarbons (PAHs) in surface sediments of China’s marginal seas

This study investigates the distribution of black carbon （BC） and its correlation with total polycyclic aromatic hydrocarbons （EPAH） in the surface sediments of China＇s marginal seas. BC content ranges from 〈0.10 to 2.45 mg/g dw （grams dry weight） in the sediments studied, and varied among the different coastal regions. The Bohai Bay sediments had the highest BC contents （average 2.18 mg/g dw）, which comprises a significant fraction （27%-41%） of the total organic carbon （TOC） preserved in the sediments. In comparison, BC in the surface sediments of the North Yellow Sea, Jiaozhou Bay, East China Sea and the South China Sea is less abundant and accounted for an average of 6%, 8%, 14% and 5%, respectively, of the sedimentary organic carbon pool. The concentration of EPAH in the surface sediments ranges from 41 to 3 667 ng/g dw and showed large spatial variations among the sampling sites of different costal regions. The Bohai Bay has the highest ZPAH values, ranging from 79 to 3 667 ng/g dw. This reflects the high anthropogenically contaminated nature of the sediments in the bay. BC is positively correlated to TOC but a strong correlation is not found between BC and ZPAH in the surface sediments studied, suggesting that BC and PAHs preserved in the sediments are derived from different sources and controlled by different biogeochemical processes. Our study suggests that the abundance of BC preserved in the sediments could represent a significant sink pool of carbon cycling in China＇s marginal seas.

Black Carbon Size in Snow of Chinese Altai Mountain in Central Asia

Black carbon(BC)in snow plays an important role to accelerate snow melting.However,current studies mostly focused on BC concentrations,few on their size distributions in snow which affected BC’s effect on albedo changes.Here we presented refractory BC(rBC)concentrations and size distributions in snow collected from Chinese Altai Mountains in Central Asia from November 2016 to April 2017.The results revealed that the average rBC concentrations were 5.77 and2.82 ng g-1for the surface snow and sub-surface snow,which were relatively higher in the melting season(April)than that in winter(November-January).The mass median volume-equivalent diameter of rBC size in surface snow was approximately at 120-150 nm,which was typically smaller than that in the atmosphere(about 200 nm for urban atmosphere).However,there existed no specific mass median volume-equivalent diameter of BC size for sub-surface snow in winter.While during the melting season,the median mass size of rBC in sub-surface snow was similar to that in surface snow.Backward trajectories indicated that anthropogenic sourced BC dominated rBC in snow(70%-85%).This study will promote our understanding on BC size distributions in snow,and highlight the possible impact of BC size on climate effect.

A novel nanofluid of modified carbon black nanoparticles for enhanced oil recovery in low permeability reservoirs

A novel nanofluid of modified carbon black(MCB)nanoparticles was initially developed for enhanced oil recovery(EOR)in low permeability reservoirs.The MCB nanoparticles were obtained via a three-step reaction involving modification by oxidation,acyl chlorination,and activated grafting.MCB nano-particles were spherically dispersed,with an average size of 72.3 nm.Compared with carbon black(CB)nanoparticles,dispersed MCB nanoparticles can effectively reduce the oil-water interfacial tension(IFT)to 10^(-2)mN/m and change the surface wettability of sand particles.Based on the results of core flooding experiments,the MCB nanoparticles exhibited a better EOR capacity than surfactants and CB nano-particles,and the final oil recovery was significantly increased by 27.27%.The core scanning test showed that the MCB nanoparticles could plug high permeability channels by adsorbing onto the surfaces of sand particles and forming larger aggregates that bridge across pores or throats,resulting in a higher swept volume.The synergistic effects of improved swept volume and oil displacement efficiency were the EOR mechanisms of the MCB nanoparticles.The studies indicate that these MCB nanoparticles have excellent potential for EOR in low permeability reservoirs.

Correcting Black Carbon Absorption Measurements with Micro-aethalometer Model 200: Insights from Comparative Analysis

Black carbon(BC)is the strongest visible-light-absorbing aerosol component in the atmosphere,with a sig-nificant impact on Earth’s radiative budget.Accurate measurement of BC light absorption is crucial for estimating its radiative effect.The micro-aethalometer model 200(MA200)by AethLabs,USA,offers high-time-resolution measurement of the multi-wavelength absorption coefficient(σ_(ab))within 1 s,making it widely used in aerial measurement due to its compact size and light weight.However,the reliability of the measuredσ_(ab) has not been extensively studied in previous research.In this study,we evaluate the performance of MA200 by comparingσ_(ab) measurements obtained from MA200 with those from the aethalometer model 33(AE33)by Magee,USA.Our results revealed a significant variation in the determinant coefficient(R 2)betweenσ_(ab) measurements from MA200 and AE33,depending on the time resolution.The R 2 increases from 0.1 to 0.5 and further to 0.97 as the time resolution of σ_(ab) increases from 1 s to 30 s and 60 s,respectively.We recommend a minimum time resolution of 30 s for stableσ_(ab) measurements using MA200.Moreover,we determineσ_(ab) from attenuation coefficient(σ_(ATN))measured by MA200 asσ_(ab)=(σ_(ATN)-σ_(0))/C_( MA),whereσ_(0 )ranges from-15.3 Mm-1 to-6.4 Mm-1 and C MA ranges from 2.65 to 3.21.Correcting the measuredσ_(ab) based on the findings of this study can provide reliable results for estimating the radiative effects of BC.

Highly Sensitive Electrochemical Detection of Nitrite Based on Cationic Surfactant Modification of Conductive Carbon Black

Nitrite is a commonly used additive in cured foods and its sensitive detection is important to human health.In this work,a simple but sensitive electrochemical sensor for nitrite was developed.Conductive carbon black(VXC-72R)functionalized with a cationic surfactant cetyltrimethylammonium bromide(CTAB)was used as an electrode material,and was coated on a glassy carbon electrode(GCE)to fabricate the electrochemical sensor(CTAB/VXC-72R/GCE)for nitrite.Zeta potential characterization and a series of electrochemical tests were carried out on several materials.It was found that the present sensor showed an enhanced sensitivity towards nitrite detection due to the enhanced surface positive charge revealed by the Zeta potential.Under optimal conditions,the ranges of good linear relationship between the peak current and the nitrite concentration were obtained to be 0.5-5.0μmol/L and 5.0-1087.0μmol/L with a lower detection limit of 0.30μmol/L.It was also successfully used for the determination of nitrite in cured food samples with excellent reproducibility,stability and selectivity.

Effects of Conductive Carbon Black on Thermal and Electrical Properties of Barium Titanate/Polyvinylidene Fluoride Composites for Road Application

In the field of roads,due to the effect of vehicle loads,piezoelectric materials under the road surface can convert mechanical vibration into electrical energy,which can be further used in road facilities such as traffic signals and street lamps.The barium titanate/polyvinylidene fluoride(BaTiO_(3)/PVDF)composite,the most common hybrid ceramic-polymer system,was widely used in various fields because the composite combines the good dielectric property of ceramic materials with the good flexibility of PVDF material.Previous studies have found that conductive particles can further improve the dielectric and piezoelectric properties of other composites.However,few studies have investigated the effect of conductive carbon black on the dielectric and piezoelectric properties of BaTiO_(3)/PVDF composites.In this study,BaTiO_(3)/PVDF/conductive carbon black composites were prepared with various conductive carbon black contents based on the optimum ratio of BaTiO_(3)to PVDF.The effects of conductive carbon black content on the morphologies,thermal performance,conductivities,dielectric properties,and piezoelectric properties of the BaTiO_(3)/PVDF/conductive carbon black composites were then investigated.The addition of conductive carbon black greatly enhances the conductivities,dielectric properties,and piezoelectric properties of the BaTiO_(3)/PVDF/conductive carbon black composites,especially when the carbon black content is 0.8%by weight of PVDF.Additionally,the conductive carbon black does not have an obvious effect on the morphologies and thermal stabilities of BaTiO_(3)/PVDF/conductive carbon black composites.

Black Phosphorus/Nanocarbons Constructing a Dual-Carbon Conductive Network for High-Performance Sodium-Ion Batteries

Black phosphorus has been recognized as a prospective candidate anode material for sodium-ion batteries(SIBs)due to its ultrahigh theoretical capacity of 2596 mA·h/g and high electric conductivity of≈300 S/m.However,its large volume expansion and contraction during sodiation/desodiation lead to poor cycling stability.In this work,a BP/graphite nanoparticle/nitrogen-doped multiwalled carbon nanotubes(BP/G/CNTs)composite with a dual-carbon conductive network is successfully fabricated as a promising anode material for SIBs through a simple two-step mechanical milling process.The unique structure can mitigate the eff ect of volume changes and provide additional electron conduction pathways during cycles.Furthermore,the formation of P–O–C bonds helps maintain the intimate connection between phosphorus and carbon,thereby improving the cycling and rate performance.As a result,the BP/G/CNTs composite delivers a high initial Coulombic efficiency(89.6%)and a high specific capacity for SIBs(1791.3 mA·h/g after 100 cycles at 519.2 mA/g and 1665.2 mA·h/g after 100 cycles at 1298 mA/g).Based on these results,the integrated strategy of one-and two-dimensional carbon materials can guide other anode materials for SIBs.

Numerical Investigation for the Effect of Unsaturated Aliphatic Hydrocarbons Addition on Precursors on Carbon Black

To investigate the effect of unsaturated aliphatic hydrocarbons on PAHs （polycyclic aromatic hydrocarbons） formation, numerical analysis using detailed reaction mechanism is performed. For the carbon black produced by benzene feedstock, three kinds of unsaturated aliphatic hydrocarbons （acetylene, diacetylene, and vinylacetylene） are added. The detailed reaction mechanism which is proposed by Wang and Frenklach is consisted by 527 reactions and 99 chemical species. The formations of PAHs and nuclei are promoted by unsaturated aliphatic hydrocarbons addition. There exits optimal benzene/acetylene ratio （XA/XB = 0.50）, benzene/diacetylene mixture ratio （XD/XB = 0.60）, benzene/vinyl-acetylene mixture ratio （XV/XB = 0.25）. The formation of nuclei is most promoted by acetylene addition, and the benzene/acetylene mixture ratio is 0.50.

Synthesis of activated carbons from black sapote seeds,characterization and application in the elimination of heavy metals and textile dyes

Many different techniques may be used to remove industrial pollutants from wastewater. Adsorption using activated carbon has been reported to be an effective method. This work proposes the use of a vegetable residue(black sapote seeds) as a raw material for its synthesis. These carbons were chemically activated using phosphoric acid and carbonized at 673 and 873 K. Adsorption isotherms were constructed for the textile dyes on the carbons, and this data was treated using Langmuir’s equation to quantitatively describe the adsorption process. The synthesized carbons were characterized using FTIR, EA, SEM, Nitrogen adsorption(specific surface areas of 879 and 652 m2·g-1), and their points of zero charge(2.1 and 2.3). It was possible to adsorb both heavy metals and textile dyes present in aqueous solutions and wastewaters using these activated carbons. Heavy metals were adsorbed almost completely by both carbons. Cationic dyes where adsorbed(58–59.8 mg·g-1) in greater amounts compared to anionic dyes(10–58.8 mg·g-1). The amount of anionic dyes adsorbed increased almost 30% by changing the pH of the solutions. One of the carbons was thermally regenerated on three occasions without losing its adsorption capacity and it was proved in a flow system.

Simulation of the Radiative Effect of Black Carbon Aerosols and the Regional Climate Responses over China

As part of the development work of the Chinese new regional climate model (RIEMS), the radiative process of black carbon (BC) aerosols has been introduced into the original radiative procedures of RIEMS, and the transport model of BC aerosols has also been established and combined with the RIEMS model. Using the new model system, the distribution of black carbon aerosols and their radiative effect over the China region are investigated. The influences of BC aerosole on the atmospheric radiative transfer and on the air temperature, land surface temperature, and total rainfall are analyzed. It is found that BC aerosols induce a positive radiative forcing at the top of the atmosphere (TOA), which is dominated by shortwave radiative forcing. The maximum radiative forcing occurs in North China in July and in South China in April. At the same time, negative radiative forcing is observed on the surface. Based on the radiative forcing comparison between clear sky and cloudy sky, it is found that cloud can enforce the TOA positive radiative forcing and decrease the negative surface radiative forcing. The responses of the climate system in July to the radiative forcing due to BC aerosols are the decrease in the air temperature in the middle and lower reaches of the Changjiang River and Huaihe area and most areas of South China, and the weak increase or decrease in air temperature over North China. The total rainfall in the middle and lower reaches of the Changjiang River area is increased, but it decreased in North China in July.

Black Carbon Particles in the Urban Atmosphere in Beijing

A study of the concentration of black carbon particles and its variation in the urban atmosphere has been carried out since 1996 in the Beijing area. The measurements were done in the late autumn and early winter each year, the period before and after domestic heating activities begin. The results show the presence of black carbon particles at the high level that vary over a large range in the urban atmosphere in Beijing. The mean value of daily average concentration for the whole observation period of 1996-2004 is 20.0 μgm^-3. An evident decrease of black carbon particle concentration in the Beijing area is observed after 2000, and the daily average concentration of black carbon particles is estimated to be 16.0 μgm^-3 with a variation range of 2.10-50.50 μgm^-3 for the period of 2000-2004. The observation method and main variation behavior characteristics of black carbon particles in the urban atmosphere in the Beijing area are given and discussed.

An overview of black carbon deposition and its radiative forcing over the Arctic

This paper gives an overview of the current understanding of the observations of black carbon(BC) in snow and ice, and the estimates of BC deposition and its radiative forcing over the Arctic. Both of the observations and model results show that, in spring, the average BC concentration and the resulting radiative forcing in Russian Arctic > Canadian and Alaskan Arctic > Arctic Ocean and Greenland. The observed BC concentration presented a signi?cant decrease trend from the Arctic coastal regions to the center of Arctic Ocean. In summer, due to the combined effects of BC accumulation and enlarged snow grain size, the averaged radiative forcing per unit area over the Arctic Ocean is larger than that over each sector of the Arctic in spring. However, because summer sea ice is always covered by a large fraction of melt ponds, the role of BC in sea ice albedo evolution during this period is secondary. Multi-model mean results indicate that the annual mean radiative forcing from all sources of BC in snow and ice over the Arctic was ~0.17 W m^(-2). Wet deposition is the dominant removal mechanism in the Arctic, which accounts for more than 90% of the total deposition. In the last part, we discuss the uncertainties in present modeling studies, and suggest potential approaches to reduce the uncertainties.

Tibetan Plateau Geladaindong black carbon ice core record(1843-1982):Recent increases due to higher emissions and lower snow accumulation

Black carbon(BC) deposited on snow and glacier surfaces can reduce albedo and lead to accelerated melt. An ice core recovered from Guoqu glacier on Mt. Geladaindong and analyzed using a Single Particle Soot Photometer(SP2) provides the ?rst long-term(1843-1982) record of BC from the central Tibetan Plateau. Post 1940 the record is characterized by an increased occurrence of years with above average BC, and the highest BC values of the record. The BC increase in recent decades is likely caused by a combination of increased emissions from regional BC sources, and a reduction in snow accumulation. Guoqu glacier has received no net ice accumulation since the 1980 s, and is a potential example of a glacier where an increase in the equilibrium line altitude is exposing buried high impurity layers. That BC concentrations in the uppermost layers of the Geladaindong ice core are not substantially higher relative to deeper in the ice core suggests that some of the BC that must have been deposited on Guoqu glacier via wet or dry deposition between 1983 and 2005 has been removed from the surface of the glacier, potentially via supraglacial or englacial meltwater.

Soil Organic Carbon, Black Carbon, and Enzyme Activity Under Long-Term Fertilization

The present study aims to understand the effects of long-term fertilization on soil organic carbon （SOC）, black carbon （BC）, enzyme activity, and the relationships among these parameters. Paddy field was continuously fertilized over 30 yr with nine different fertilizer treatments including N, P, K, NP, NK, NPK, 2NPK （two-fold NPK）, NPK＋manure （NPKM）, and CK （no fertilization）, N, 90 kg urea-N ha^-1 yr^-1; P, 45 kg triple superphosphate-P205 ha^-1 yr^-1; K, 75 kg potassium chloride-K20 ha^-1 yr^-1; and pig manure, 22 500 kg ha^-1 yr^-1. Soil samples were collected and determined for SOC, BC content, and enzyme activity. The results showed that the SOC in the NPKM treatment was significantly higher than those in the K, P, and CK treatments. The lowest SOC content was found in the CK treatment. SOC content was similar in the N, NP, NK, NPK, 2NPK, and NPKM treatments. There was no significant difference in BC content among different treatments. The BC-to-SOC ratios （BC/SOC） ranged from 0.50 to 0.63, suggesting that BC might originate from the same source. Regarding enzyme activity, NPK treatment had higher urease activity than NPKM treatment. The urease activity of NPKM treatment was significantly higher than that of 2NPK, NP, N, P, K, CK, and NPKM treatment which produced higher activities of acid phosphatase, catalase, and invertase than all other treatments. Our results indicated that long-term fertilization did not significantly affect BC content. Concurrent application of manure and mineral fertilizers increased SOC content and significantly enhanced soil enzyme activities. Correlation analysis showed that catalase activity was significantly associated with invertase activity, but SOC, BC, and enzyme activity levels were not significantly correlated with one another. No significant correlations were observed between BC and soil enzymes. It is unknown whether soil enzymes play a role in the decomposition of BC.

Modeling black carbon and its potential radiative effects over the Tibetan Plateau

A regional climate model(RegCM4.3.4) coupled with an aerosol-snow/ice feedback module was used to simulate the deposition of anthropogenic light-absorbing impurities in snow/ice and the potential radiative feedback of black carbon(BC) on temperature and snow cover over the Tibetan Plateau(TP) in 1990-2009. Two experiments driven by ERA-interim reanalysis were performed, i.e., with and without aerosol-snow/ice feedback. Results indicated that the total deposition BC and organic matter(OM) in snow/ice in the monsoon season(MayeS eptember) were much more than non-monsoon season(the remainder of the year). The great BC and OM deposition were simulated along the margin of the TP in the non-monsoon season, and the higher deposition values also occurred in the western TP than the other regions during the monsoon period. BC-in-snow/ice decreased surface albedo and caused positive surface radiative forcing(SRF)(3.0-4.5 W m^(-2)) over the western TP in the monsoon season. The maximum SRF(5-6 W m^(-2)) simulated in the Himalayas and southeastern TP in the non-monsoon season. The surface temperature increased by 0.1-1.5℃ and snow water equivalent decreased by 5-25 mm over the TP, which showed similar spatial distributions with the variations of SRF in each season. This study provided a useful tool to investigate the mechanisms involved in the effect of aerosols on climate change and the water cycle in the cryospheric environment of the TP.

Radiative Forcing and Climate Response Due to Black Carbon in Snow and Ice

The radiative forcing and climate response due to black carbon（BC） in snow and/or ice were investigated by integrating observed effects of BC on snow/ice albedo into an atmospheric general circulation model（BCC AGCM2.0.1） developed by the National Climate Center（NCC） of the China Meteorological Administration（CMA）.The results show that the global annual mean surface radiative forcing due to BC in snow/ice is ＋0.042 W m 2,with maximum forcing found over the Tibetan Plateau and regional mean forcing exceeding ＋2.8 W m 2.The global annual mean surface temperature increased 0.071 C due to BC in snow/ice.Positive surface radiative forcing was clearly shown in winter and spring and increased the surface temperature of snow/ice in the Northern Hemisphere.The surface temperatures of snow-covered areas of Eurasia and North America in winter（spring） increased by 0.83 C（0.6 C） and 0.83 C（0.46 C）,respectively.Snowmelt rates also increased greatly,leading to earlier snowmelt and peak runoff times.With the rise of surface temperatures in the Arctic,more water vapor could be released into the atmosphere,allowing easier cloud formation,which could lead to higher thermal emittance in the Arctic.However,the total cloud forcing could decrease due to increasing cloud cover,which will offset some of the positive feedback mechanism of the clouds.

Paleoceanographic Indicators for Early Cambrian Black Shales from the Yangtze Platform, South China: Evidence from Biomarkers and Carbon Isotopes

The lower Cambrian Niutitang Formation, a widespread black shale deposition, is of geological interest because of its polymetallic beds, Cambrian explosion, depositional ages, dramatic environmental changes and so on. Previous study focused mainly on inorganic geochemistry and few studies have investigated the organic fractions of upper Neoproterozoic-lower Cambrian strata in South China. Here we report a study of biomarkers plus organic carbon isotopes for black shales from Ganziping, Hunan Province （China）. All the saturated hydrocarbon fractions have a unimodal distribution of n-alkanes, a high content of short-chain alkanes and maximize at C 19 or C 20 （C 23 for sample Gzh00-1）. The C 27 /C 29 sterane ratio ranges from 0.77 to 1.20 and 4-methylsteranes are in low abundance. These parameters indicate that algae and bacteria are the important primary producers. Furthermore, biomarker maturity proxies show the samples to be higher maturity. The low Pr/Ph values （0.7） suggest that the samples were deposited under anoxic conditions and, likely, under stratified water columns. In addition, 25-norhopanes and gammacerane are present as diagnostic indicators of normal marine salinity and dysoxic to anoxic conditions. During the Early Tommotian, known to coincide with a transgression event, small shelly fossils increased in abundance and diversity. Moreover, positive δ 13 C org excursions close to 1.4‰ occur at the base of the Tommotian stage. In summary, the Early Cambrian black shales were deposited under dramatic paleoenvironmental changes, including oceanic anoxia, higher primary productivity and sea-level rise.

Age-related Changes of Carbon Accumulation and Allocation in Plants and Soil of Black Locust Forest on Loess Plateau in Ansai County, Shaanxi Province of China

The effects of reforestation on carbon （C） sequestration in China＇s Loess Plateau ecosystem have attracted much research attention in recent years. Black locust trees （Robinia pseudoacacia L.） are valued for their important use in reforestation and water and soil conservation efforts. This forest type is widespread across the Loess Plateau, and must he an essential component of any planning for C sequestration efforts in this fragile ecological region. The long-term effects of stand age on C accumulation and allocation after reforestation remains uncertain. We examined an age-sequence of black locust forest （5, 9, 20, 30, 38, and 56 yr since planting） on the Loess Plateau to evaluate C accumulation and allocation in plants （trees, shrubs, herbages, and leaf litter） and soil （0-100 cm）. Allometric equations were developed for estimating the biomass of tree components （leaf, branch, stem without bark, bark and root） with a de- structive sampling method. Our results demonstrated that black locust forest ecosystem accumulated C constantly, from 31.42 Mg C/ha （1 Mg = 106 g） at 5 yr to 79.44 Mg C/haat 38 yr. At the ＇old forest＇ stage （38 to 56 yr）, the amount of C in plant biomass significantly decreased （from 45.32 to 34.52 Mg C/ha） due to the high mortality of trees. However, old forest was able to accumulate C continuously in soil （from 33.66 to 41.00 Mg C/ha）. The C in shrub biomass increased with stand age, while the C stock in the herbage layer and leaf litter was age-independent. Reforestation resulted in C re-allocation in the forest soil. The topsoil （0-20 cm） C stock increased constantly with stand age. However, C storage in sub-top soil, in the 20-30, 30-50, 50-100, and 20-100 cm layers, was age-independent. These results suggest that succession, as a temporal factor, plays a key role in C accumulation and re-allocation in black locust forests and also in regional C dynamics in vegetation.