Acoustic Non-Destructive Testing Technology in Concrete Bridge Inspection and Pile Foundation Detection

This article takes the actual construction project of a certain concrete bridge project as an example to analyze the application of acoustic non-destructive testing technology in its detection.It includes an overview of a certain bridge construction project studied and acoustic non-destructive testing technology and the application of acoustic non-destructive testing technology in actual testing.This analysis hopes to provide some guidelines for acoustic non-destructive testing of modern concrete bridge projects.

Application of Formation Testing Technology to Oil and and Gas Exploration in China

The introduction and application of formation testing technology to China has been relatively late.In the 1940's,the pounding valve tester developed by Johnston Company was used in.Yumen Oilfield.After the 1950's,the formation testing technology was no longer used due to introduction and application of former Soviet Union's testing technology.

Hard IP Core Nondestructive Testing Technology

Based on the analysis of the existing hard IP core testing technology, the hard IP core nondestructive testing technology was studied, according to the verification requirements of a large number of hard IP core precise and fast testing. Combined with the external automatic test equipment (ATE) and the on-chip evaluation circuit, a general evaluation system of simulating user system on chip (SOC) with signal timing calibration and compensation by software and hardware compensation structures were introduced to realize the function, performance and reliability verification of the hard IP core. The design and verification of a random access memory (SRAM) hard IP core based on an on-chip evaluation circuit was actually completed, and the key timing parameters of the hard IP core were tested. The address setup time parameter was taken as an example to analyze the specific testing method and the test results were obtained. With this testing technology, the accuracy of testing the timing parameters of hard IP core can reach pS level, compared with the hard IP core packaged test, the accuracy of the result data is fully reflected.

Discussion and Research on Orthopedic Biomechanics Testing Technology

With the continuous development of today's science and technology,orthopedic research has also achieved continuous updates in materials and machinery.In this case,the mechanics testing technology of orthopedics also needs to be further updated and developed,so that it can effectively meet the requirement for today's orthopedic mechanical testing.Based on this,this article analyzes several advanced orthopedic mechanics testing techniques.It is hoped that this analysis can provide a reference for the good application and development of orthopedic mechanics testing technology.

Advances of Genetic Testing Technology in Etiology Diagnosis of Recurrent Spontaneous Abortion

Recurrent spontaneous abortion (RSA) is a complex and heterogeneous disorder with multiple etiologies. Genetic factors are thought to play an important role in the etiology of RSA. With recent advances in genetic testing technologies, there has been an increasing interest in using these tools to diagnose the etiology of RSA. This review discusses the different types of genetic testing methods, such as karyotyping, chromosomal microarray analysis, next-generation sequencing, and their applications in the diagnosis of the etiology RSA. The use of genetic testing in the diagnosis of RSA has the potential to improve the accuracy of diagnosis and the understanding of the underlying mechanisms of the disorder, which could lead to better management and treatment of affected individuals.

Discussion on the Status Quo of Non-Destructive Testing Technology in Highway Engineering and Strategies of Improving the Quality of Testing

Highway test and detection technology play a very important role in controlling the quality of road and bridge engineering and improving the maintenance of roads and bridges.The study of highway bridge test detection technology is both theoretically and practically useful.Road and bridge test and detection is a complicated task.With the development of science and technology,highway and bridge engineering test and detection technology has also made great progress.The continuous improvement of test and detection technology has brought good social benefits to road and bridge construction.This article discusses the problems in test and detection technology of highway bridges and how to improve the quality of test and detection.

A brief analysis on the teaching reform of mechanical engineering testing technology

Mechanical engineering testing technology is a basic course of mechanical related majors,which occupies a very important position. The author combining the actual situation of local colleges and universities taking office itself for some disadvantages in traditional teaching mode,this paper put forward should change single teaching methods in teaching,establish a practical laboratory,pay more attention to the perfect combination of theoretical knowledge and practical ability,to fully develop the students' ability of independent innovation and practical ability.

TESTING TECHNOLOGY OF OXYGEN IN MINERALS WITH EPMA

EPMA has used to measure oxygen con- tent directly in recentyears. This paper discusses the fac- tors affecting the quantitativeanalysis of oxygen content and the optimal experimental conditions,and gives some measured results of oxygen content in corundums whichare collected from different geological situations.

Productive test of a newly drying technology of veneer： intermittent-contact drying of veneer with flexible screen belt

A newly drying technology, intermittent-contact drying of veneer with flexible screen belt (ICD-fbs), was invented and used in poplar veneer drying. Productive test was carried out for validating the practical use of this drying method. The test result shows that to dispose flexible screen belts on the two sides of hot board could help steam discharge remarkably. The veneer dried using ICD-fsb method had smooth and level surface, less deformation and warping, even moisture content, and high utilization rate. The time for opening hot board to discharge steam,which, early or late, is a key to obtain good drying result, was determined at the time when the core's temperature of veneer reaches 100℃ (vaporization). Using ICD-fsb method, the shrinking rates in tangent of veneer were from 1.90% to 2.26% for veneer of 0.4 mm in thickness,2.49% to 4.50% for veneer of 1 mm in thickness and 1.34% to 3.30% for veneer of 1.7 mm in thickness, which are much lower than the results obtained by other drying methods. The method of ICD-fsb offers a reliable technological guarantee for solving the deformation problem of veneer drying, especially the deformation of wood from quick-growing plantation.

Research on wind erosion processes and controlling factors based on wind tunnel test and 3D laser scanning technology

The study of wind erosion processes is of great importance to the prevention and control of soil wind erosion.In this study,three structurally intact soil samples were collected from the steppe of Inner Mongolia Autonomous Region,China and placed in a wind tunnel where they were subjected to six different wind speeds(10,15,17,20,25,and 30 m/s)to simulate wind erosion in the wind tunnel.After each test,the soil surfaces were scanned by a 3D laser scanner to create a high-resolution Digital Elevation Model(DEM),and the changes in wind erosion mass and microtopography were quantified.Based on this,we performed further analysis of wind erosion-controlling factors.The study results showed that the average measurement error between the 3D laser scanning method and weighing method was 6.23%for the three undisturbed soil samples.With increasing wind speed,the microtopography on the undisturbed soil surface first became smooth,and then fine stripes and pits gradually developed.In the initial stage of wind erosion processes,the ability of the soil to resist wind erosion was mainly affected by the soil hardness.In the late stage of wind erosion processes,the degree of soil erosion was mainly affected by soil organic matter and CaCO_(3)content.The results of this study are expected to provide a theoretical basis for soil wind erosion control and promote the application of 3D laser scanners in wind erosion monitoring.

A LM-3C Successfully Launches a Communications Technology Test Satellite 3

A LM-3C carrier rocket at 0:53 Beijing time on December 25 was launched from the Xichang Satellite Launch Center,putting the Communications Technology Test Satellite 3 into its orbit.The satellite was developed by SAST for demonstrating related technologies.

Discussion on Test and Detection Technology of Highway Asphalt Pavement

The road traffic industry in China has been developing rapidly in recent years.Asphalt has become the main material in road construction because of its seamless connection and short construction period,and it has an important impact on the overall quality of highway construction.Therefore,it is necessary to conduct scientific and reasonable tests and detections for highway asphalt pavement.This paper presents a discussion on the test and detection technology of highway asphalt pavement for future reference.

LM-3B Successfully Launched Communications Technology Test Satellite 2

At 23:18 Beijing time on January 5,a LM-3B carrier rocket lifted off from the Xichang Satellite Launch Center,sending a communication technology test satellite into its preset orbit.This successful launch was a good start for China’s launch missions in 2017.The Communications Technology Test Satellite 2 was developed by the Shanghai Academy of Spaceflight Technology.It is a next-generation telecom-

Technologies for Asphalt Pavement Surface Testing in Road and Bridge Construction

Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.

SJ-9A/B Satellites Conduct Key Technology Tests

On October 14, two satellites SJ-9A/B were sent into their preset orbits by a LM-2C/SMA launch vehicle, which is the first flight of a series of China's civilian technology experimental satellites. SJ-9A and B are the first two satellites in the series of civilian technology experimental satellites designed for tests such as long lifetime and high reliability, high precision and high performance of satellite, domestically developed core components, satellite formation

Study on Control Technology of Rhynhophorus ferrugineus Fabricius

[ Objective ] The study aimed to effectively and timely control the occurrence and damage of Rhyrthophorus femuneus Fabricius in Nanning City, Guangxi Province. [Method]The investigation on the distribution and damage of R. ferrugineus was conducted in Nanning City, Guangxi Province. Its transmit ways were chocked, light trapping experiment, combination of artificial and chemical control, and chemical control were conducted. [ Result] The investigation indicated that there had distribution of R. ferrugineus in 70% plant nurseries and the scenic areas in Nanning City. Among the planted Hemp palm plants, the damaged vari- eties were up to 80%. The output of palm seedlings which had carried with pests was the main approach for spread and damage of R. ferrugineus. It was effective and feasible to use frequently vibration trapping light to trap adults. Pesticides were sprayed on the bellmouth of host （ central leaf）, then aging leaf sheaths or agri- cultural film was used to strap tender leaf sheath in stalks, which could achieve the purpose of controlling R. femugineus. [ Conclusion ] The control strategies of R. femugineus should be focused on controlling seedlings and the plants with tree age less than ten year; the plants with long tree age and the tall plants should adopt selection control if it was necessary, and the integrated control should be implemented on the prevention measure.

AN ALGORITHM FOR AUTOMATICALLY GENERATING BLACK-BOX TEST CASES

Selection of test cases plays a key role in improving testing efficiency. Black-box testing is an important way of testing, and its validity lies on the selection of test cases in some sense. A reasonable and effective method about the selection and generation of test cases is urgently needed. This letter first introduces some usualmethods on black-box test case generation,then proposes a new algorithm based on interface parameters and discusses its properties, finally shows the effectiveness of the algorithm.

Experimental investigation on the invert stability of operating railway tunnels with different drainage systems using 3D printing technology

In recent years, the invert anomalies of operating railway tunnels in water-rich areas occur frequently,which greatly affect the transportation capacity of the railway lines. Tunnel drainage system is a crucial factor to ensure the invert stability by regulating the external water pressure(EWP). By means of a threedimensional(3D) printing model, this paper experimentally investigates the deformation behavior of the invert for the tunnels with the traditional drainage system(TDS) widely used in China and its optimized drainage system(ODS) with bottom drainage function. Six test groups with a total of 110 test conditions were designed to consider the design factors and environmental factors in engineering practice,including layout of the drainage system, blockage of the drainage system and groundwater level fluctuation. It was found that there are significant differences in the water discharge, EWP and invert stability for the tunnels with the two drainage systems. Even with a dense arrangement of the external blind tubes, TDS was still difficult to eliminate the excessive EWP below the invert, which is the main cause for the invert instability. Blockage of drainage system further increased the invert uplift and aggravated the track irregularity, especially when the blockage degree is more than 50%. However, ODS can prevent these invert anomalies by reasonably controlling the EWP at tunnel bottom. Even when the groundwater level reached 60 m and the blind tubes were fully blocked, the invert stability can still be maintained and the railway track experienced a settlement of only 1.8 mm. Meanwhile, the on-site monitoring under several rainstorms further showed that the average EWP of the invert was controlled within 84 k Pa, while the maximum settlement of the track slab was only 0.92 mm, which also was in good agreement with the results of model test.

Effects of Soil Testing and Formulated Fertilization on Yield and Economic Benefit of Major Crops in Burundi

[Objectives]The purpose of this study was to provide technical support for high-yield cultivation of major crops in Burundi,thereby increasing local farmers'income and promoting sustainable development of agriculture in Burundi.[Methods]In the IMBO and MOSO test stations of the Burundi Academy of Agricultural Sciences and the Burundi Fruit and Vegetable Extension and Service Center,soil testing and formulated fertilization test and demonstration was carried out in rice,maize and cabbage.The test set up three treatments,soil testing and formulated fertilization(STFF),local routine fertilization(RF)and non-fertilization(CK)to investigate the effects of soil testing and formulated fertilization on the yield and economic benefit of the crops.[Results]In the plot test,the yield and net economic benefit of rice,maize and cabbage were both highest in the STFF treatment.Compared with those in the RF treatment,the yield of rice,maize and cabbage increased by 19.0%,25.7%and 33.0%,respectively,and the net economic benefit increased by 4292,2837 and 8232 yuan/ha,respectively.In the field test,the yield and net economic benefit of rice,maize and cabbage were also both highest in the STFF treatment.The yield increased by 18.1%,24.3%and 25.9%,respectively,and the net economic benefit increased by 4142,2881 and 8665 yuan/ha,respectively compared with those in the RF treatment.[Conclusions]Soil testing and formulated fertilization not only increased rice,maize and cabbage yield per unit area,but also increased farmers'income in Burundi.It is one of the important technical measures to promote the increase of agricultural production and income in Burundi.