GH4169 is the main material for aero-cngine blades and integrated blisks. Because GH4169 has a poor milling performance, the profile precision and surtace integrity of blades and integrated blisks are difficult to be ...GH4169 is the main material for aero-cngine blades and integrated blisks. Because GH4169 has a poor milling performance, the profile precision and surtace integrity of blades and integrated blisks are difficult to be met by utilizing the conventional milling process, which directly influence the global performance and reliability of aero-engines. Through grinding experiments on parameters and surface integrity optimization, the helical cantilever grinding process utilizing a 300# CBN RB wheel is presented and applied in finish machining of GH4169 blades. The profile errors of the blade surface are within ±0.01 mm, the roughness is less than 0.4μm, the residual compressive stresses and the hardening rate are appropriate, there are no phenomena of burr and smearing with the grinding chips, and the leading/trailing edge can be smoothly connected with the suction/pressure surface. All the experimental results indicate that this grinding process is greatly suitable for the profile finish machining of GH4169 blades.展开更多
基金co-supported by the National Natural Science Foundation of China (No. 51105024)the National Science and Technology Major Project of China (No. 2013ZX04001051)
文摘GH4169 is the main material for aero-cngine blades and integrated blisks. Because GH4169 has a poor milling performance, the profile precision and surtace integrity of blades and integrated blisks are difficult to be met by utilizing the conventional milling process, which directly influence the global performance and reliability of aero-engines. Through grinding experiments on parameters and surface integrity optimization, the helical cantilever grinding process utilizing a 300# CBN RB wheel is presented and applied in finish machining of GH4169 blades. The profile errors of the blade surface are within ±0.01 mm, the roughness is less than 0.4μm, the residual compressive stresses and the hardening rate are appropriate, there are no phenomena of burr and smearing with the grinding chips, and the leading/trailing edge can be smoothly connected with the suction/pressure surface. All the experimental results indicate that this grinding process is greatly suitable for the profile finish machining of GH4169 blades.
