Field experiments of mixed- (intercropping) and pure-planting (monoculture) of four rice varieties, representing improved hybrid varieties (Shanyou63 and Shanyou22) and high-quality traditional varieties (Huangkenuo a...Field experiments of mixed- (intercropping) and pure-planting (monoculture) of four rice varieties, representing improved hybrid varieties (Shanyou63 and Shanyou22) and high-quality traditional varieties (Huangkenuo and Zigu) from Yunnan Province, were conducted based on their differences in genetic background and agro-economical characteristics. The results demonstrated that the mixed-planting of the hybrid rice and high-quality traditional rice varieties had a significantly greater effect on controlling rice blast disease than the monoculture of these varieties, particularly the traditional ones. It is evident for the highly susceptible traditional varieties in mixed-planting to achieve disease control, with significant decreases in blast incidences and severity indexes. The blast control efficiency reached up to 83-98% under such planting model. This suggests that an appropriate mixed-planting of rice varieties with diverse genetic background and agro-economical characteristics is an effective approach for rice blast control. In addition, resistance of the traditional rice varieties to lodging was considerably increased in the plots with mixed-planting, compared with the plots with monoculture. The average rate of grain-yield increase ranged from 6. 5 to 9.7% in the plots with mixed-planting.展开更多
The article systematically summarizes the pathogen, incidence law and disease symptom of rice blast, and raises the integrated control technique for the disease, which will provide the certain theoretical basis for th...The article systematically summarizes the pathogen, incidence law and disease symptom of rice blast, and raises the integrated control technique for the disease, which will provide the certain theoretical basis for the control of the disease, being benefit for the actual production of rice in field.展开更多
With the development of fracture mechanics,the fracture plane control blasting with notched borcholes hascome into being.This technique is used to create a satisfactory presplit along the contour of an excavation inro...With the development of fracture mechanics,the fracture plane control blasting with notched borcholes hascome into being.This technique is used to create a satisfactory presplit along the contour of an excavation inrock.However,the amount of explosive loaded in each hol usually is determined by trial and error.Because ofthis,two approaches estimating the amount of explosive for the blasting technique are suggested.展开更多
This paper analyses the fragmenting principle of static blasting agent (SBA) and the action of its cutting fragmentation. Using SBA for sterming material proved very useful and advantageous. Here we analyse in detail ...This paper analyses the fragmenting principle of static blasting agent (SBA) and the action of its cutting fragmentation. Using SBA for sterming material proved very useful and advantageous. Here we analyse in detail the cutting action of pre- stress and stress wave in pre-stressing force blasting.展开更多
Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the ...Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the practical application result show that the cutting blasting technology is an effective way.展开更多
Blasting operation dissipates much of the blasting energy in crushing the rock at the borehole and the resulting cracks are randomly oriented. There is very little control of the fracture plane. In order to control th...Blasting operation dissipates much of the blasting energy in crushing the rock at the borehole and the resulting cracks are randomly oriented. There is very little control of the fracture plane. In order to control the fracture plane, many methods have been applied. This paper discusses a new blasting method in which a high degree of fracture control can be achieved while minimizing the ground shock.展开更多
In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, eval...In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, evaluation and control of blast-induced effects are essential to the safety of nearby buildings and integrity of bedrock in blasting field. In Fangchenggang nuclear power station of China, the drill-and- blast method was employed for bedrock excavation. In order to reduce the blast-induced damage zone, the wave propagation and associated damage to rock mass should be carefully investigated. In this paper, the wave propagation regressively obtained from field monitoring data was presented based on empirical formula （e.g. Sadovsloj formula）. The relationship between the peak particle velocity （PPV） at a distance of 30 m away from the charge hole and charge per delay in blast design was derived. Meanwhile, the acoustic tests before and after blasting were conducted to determine the damage depth of rock mass. The charge per delay in blast design was then calibrated based on the blast-induced wave propagation regularity. The results showed that a satisfactory effect was achieved on blast-induced damage control of rock mass. This could be helpful to rock damage control in similar blasting projects.展开更多
In this paper, a new method of fracture blast is presented. The theoretical analysis, model experiments and field industrial tests have been carried out. The results show that the charge powder factor could be lowered...In this paper, a new method of fracture blast is presented. The theoretical analysis, model experiments and field industrial tests have been carried out. The results show that the charge powder factor could be lowered and the holenumbers can be reduced by 20% or so compared with conventional way. It is very promising to use this new method in the fracture blast.展开更多
Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surfac...Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.展开更多
Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a...Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a variety of mining and geologic factors, and a safe design is necessary for a successful surface operation. To improve highwall stability, it is important to understand the connection between local geology and blasting. Explosives are employed throughout the mining industry for primary rock breakage. There are a number of controlled blasting techniques that can be implemented to improve highwall stability.These include line drilling, smooth wall blasting, trim blasting, buffer blasting, air decking, and presplitting. Each of these techniques have associated advantages and disadvantages. Understanding local geology is necessary for selecting the appropriate controlled blasting technique. Furthermore, understanding the limitations and conditions for successful implementation of each technique is necessary. A discussion of the impact of geologic conditions on highwall stability is provided. Additionally, discussion is provided for the successful incorporation of the controlled blasting techniques listed above, and the associated mining and geologic factors that influence the selection and design of controlled blasting plans.Finally, a new methodology is proposed.展开更多
Rockburst problems induced by high in-situ stresses were prominent during construction of the headrace tunnels of Jinping II hydropower station. The rockbursts occurred in various forms, and it is necessary to take pe...Rockburst problems induced by high in-situ stresses were prominent during construction of the headrace tunnels of Jinping II hydropower station. The rockbursts occurred in various forms, and it is necessary to take pertinent measures for integrated prevention and control of rockbursts. In view of the rockburst characteristics during tunnel construction of Jinping II hydropower station, the engineering geological conditions were presented, and the features, mechanisms and forms of rockbursts observed during construction were analyzed in detail. A large number of scientific researches, experiments and applications were conducted. Multiple measures were adopted to prevent and control rockbursts, including the prediction and early warning measures, stress relief by blasting in advance, optimized blasting design and optimized tunnel support in the tunnel sections prone to strong rockbursts. The effectiveness of these prevention and control measures was evaluated. Experiences have been accumulated through a great number of helpful explorations and practices for rockburst prevention and control. A comprehensive rockburst prevention and control system has been gradually established.展开更多
A hybrid dynamic model was proposed, which considered both the hydrokinetic and the chaotic properties of the blast furnace ironmaking process; and great emphasis was put on its mechanism. The new model took the high ...A hybrid dynamic model was proposed, which considered both the hydrokinetic and the chaotic properties of the blast furnace ironmaking process; and great emphasis was put on its mechanism. The new model took the high complexity of the blast furnace as well as the effects of main parameters of the model into account, and the predicted results were in very good agreement with actual data.展开更多
基金This research was supported by the National Natural Science Foundation of China and Natural Science Foundation of Yunnan(01NG10,01C0007Z,AA211091 and 30160048)the Shanghai Commission of Education(00XD14006).
文摘Field experiments of mixed- (intercropping) and pure-planting (monoculture) of four rice varieties, representing improved hybrid varieties (Shanyou63 and Shanyou22) and high-quality traditional varieties (Huangkenuo and Zigu) from Yunnan Province, were conducted based on their differences in genetic background and agro-economical characteristics. The results demonstrated that the mixed-planting of the hybrid rice and high-quality traditional rice varieties had a significantly greater effect on controlling rice blast disease than the monoculture of these varieties, particularly the traditional ones. It is evident for the highly susceptible traditional varieties in mixed-planting to achieve disease control, with significant decreases in blast incidences and severity indexes. The blast control efficiency reached up to 83-98% under such planting model. This suggests that an appropriate mixed-planting of rice varieties with diverse genetic background and agro-economical characteristics is an effective approach for rice blast control. In addition, resistance of the traditional rice varieties to lodging was considerably increased in the plots with mixed-planting, compared with the plots with monoculture. The average rate of grain-yield increase ranged from 6. 5 to 9.7% in the plots with mixed-planting.
文摘The article systematically summarizes the pathogen, incidence law and disease symptom of rice blast, and raises the integrated control technique for the disease, which will provide the certain theoretical basis for the control of the disease, being benefit for the actual production of rice in field.
文摘With the development of fracture mechanics,the fracture plane control blasting with notched borcholes hascome into being.This technique is used to create a satisfactory presplit along the contour of an excavation inrock.However,the amount of explosive loaded in each hol usually is determined by trial and error.Because ofthis,two approaches estimating the amount of explosive for the blasting technique are suggested.
文摘This paper analyses the fragmenting principle of static blasting agent (SBA) and the action of its cutting fragmentation. Using SBA for sterming material proved very useful and advantageous. Here we analyse in detail the cutting action of pre- stress and stress wave in pre-stressing force blasting.
文摘Based on experiments in lab, this paper analyzes the mechanism of directional broken controlled blasting and applies the technology to the cutting by utilizing its characteristic. The model cutting experiment and the practical application result show that the cutting blasting technology is an effective way.
文摘Blasting operation dissipates much of the blasting energy in crushing the rock at the borehole and the resulting cracks are randomly oriented. There is very little control of the fracture plane. In order to control the fracture plane, many methods have been applied. This paper discusses a new blasting method in which a high degree of fracture control can be achieved while minimizing the ground shock.
基金supported by the Key Program of National Natural Science Foundation of China(Grant No.51439008)National Natural Science Foundation of China(Grant Nos.41572307 and51779248)National Natural Science Funds for Distinguished Young Scholar of China(Grant No.41525009)
文摘In the process of blasting excavation, stress wave propagation and gas expansion can basically induce damage to surrounding rocks, which is detrimental to rock mass integrity and engineering safety. In this case, evaluation and control of blast-induced effects are essential to the safety of nearby buildings and integrity of bedrock in blasting field. In Fangchenggang nuclear power station of China, the drill-and- blast method was employed for bedrock excavation. In order to reduce the blast-induced damage zone, the wave propagation and associated damage to rock mass should be carefully investigated. In this paper, the wave propagation regressively obtained from field monitoring data was presented based on empirical formula （e.g. Sadovsloj formula）. The relationship between the peak particle velocity （PPV） at a distance of 30 m away from the charge hole and charge per delay in blast design was derived. Meanwhile, the acoustic tests before and after blasting were conducted to determine the damage depth of rock mass. The charge per delay in blast design was then calibrated based on the blast-induced wave propagation regularity. The results showed that a satisfactory effect was achieved on blast-induced damage control of rock mass. This could be helpful to rock damage control in similar blasting projects.
文摘In this paper, a new method of fracture blast is presented. The theoretical analysis, model experiments and field industrial tests have been carried out. The results show that the charge powder factor could be lowered and the holenumbers can be reduced by 20% or so compared with conventional way. It is very promising to use this new method in the fracture blast.
文摘Controlled blasting techniques are used to control overbreak and to aid in the stability of the remaining rock formation. Presplitting is one of the most common methods which is used in many open pit mining and surface blast design. The purpose of presplitting is to form a fracture plane across which the radial cracks from the production blast cannot travel. The purpose of this study is to investigate of effect of presplitting on the generation of a smooth wall in continuum and jointed rock mass. The 2D distinct element code was used to simulate the presplitting in a rock slope. The blast load history as a function of time was applied to the inner wall of each blasthole. Important parameters that were considered in the analysis were stress tensor and fracturing pattern. The blast loading magnitude and blasthole spacing and jointing pattern were found to be very significant in the final results.
文摘Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a variety of mining and geologic factors, and a safe design is necessary for a successful surface operation. To improve highwall stability, it is important to understand the connection between local geology and blasting. Explosives are employed throughout the mining industry for primary rock breakage. There are a number of controlled blasting techniques that can be implemented to improve highwall stability.These include line drilling, smooth wall blasting, trim blasting, buffer blasting, air decking, and presplitting. Each of these techniques have associated advantages and disadvantages. Understanding local geology is necessary for selecting the appropriate controlled blasting technique. Furthermore, understanding the limitations and conditions for successful implementation of each technique is necessary. A discussion of the impact of geologic conditions on highwall stability is provided. Additionally, discussion is provided for the successful incorporation of the controlled blasting techniques listed above, and the associated mining and geologic factors that influence the selection and design of controlled blasting plans.Finally, a new methodology is proposed.
文摘Rockburst problems induced by high in-situ stresses were prominent during construction of the headrace tunnels of Jinping II hydropower station. The rockbursts occurred in various forms, and it is necessary to take pertinent measures for integrated prevention and control of rockbursts. In view of the rockburst characteristics during tunnel construction of Jinping II hydropower station, the engineering geological conditions were presented, and the features, mechanisms and forms of rockbursts observed during construction were analyzed in detail. A large number of scientific researches, experiments and applications were conducted. Multiple measures were adopted to prevent and control rockbursts, including the prediction and early warning measures, stress relief by blasting in advance, optimized blasting design and optimized tunnel support in the tunnel sections prone to strong rockbursts. The effectiveness of these prevention and control measures was evaluated. Experiences have been accumulated through a great number of helpful explorations and practices for rockburst prevention and control. A comprehensive rockburst prevention and control system has been gradually established.
基金Item Sponsored by National Basic Research Programof China (2005EC000166) Ningbo Natural Science Foundation ofChina (2006A610032)
文摘A hybrid dynamic model was proposed, which considered both the hydrokinetic and the chaotic properties of the blast furnace ironmaking process; and great emphasis was put on its mechanism. The new model took the high complexity of the blast furnace as well as the effects of main parameters of the model into account, and the predicted results were in very good agreement with actual data.
