Practice of improving the hot blast temperature for the 2500 m^3 BF

A high blast temperature is an effective measure that improves pulverized coal injection （PCI）and energy consumption,decreases the cost of blast furnaces （BF）. Apart from using technology such as the increased vault temperature of the hot-blast stove, the increased temperature of the waste gas, the preheating of combustion air and gas, and fully closed mixed air valves, other measures, such as using an oxygen-enriched blast stove, burning high heating value converter gas, increasing the number of stove changes to reduce the time needed for stove blasts, were taken to increase the blast temperature of the 2 500 m3 BF in recent years. The blast temperature of the 2 500 m3 BF was continuously increased in these years. The monthly average temperature of the 2 500 m3 BF reached 1 158℃, with the highest blast temperature reaching 1 195 ℃ in 2006. This technique of increased blast temperatures has reached an advanced level in China.

Dome Combustion Hot Blast Stove for Huge Blast Furnace

In Shougang Jingtang 5 500m 3 huge blast furnace ( BF ) design , dome combustion hot blast stove ( DCHBS ) technology is developed.DCHBS process is optimized and integrated , and reasonable hot blast stove ( HBS ) technical parameters are determined.Mathematic model is established and adopted by computational fluid dynamics ( CFD ) .The transmission theory is studied for hot blast stove combustion and gas flow , and distribution results of HBS velocity field , CO density field and temperature field are achieved.Physical test model and hot trail unit are established , and the numeral calculation result is verified through test and investigation.3-D simulation design is adopted.HBS process flow and process layout are optimized and designed.Combustion air two-stage high temperature preheating technology is designed and developed.Two sets of small size DCHBSs are adopted to preheat the combustion air to 520-600℃.With the precondition of BF gas combustion , the hot blast stove dome temperature can exceed 1 420 ℃. According to DCHBS technical features , reasonable refractory structure is designed.Effective technical measures are adopted to prevent hot blast stove shell intercrystalline stress corrosion.Hot blast stove hot pipe and lining system are optimized and designed.After blowing in , the blast temperature keeps increasing , and the monthly average blast temperature reaches 1 300℃ when burning single BF gas.

Comprehensive Evaluation of OxyCup Process for Steelmaking Dust Treatment Based on Calculation of Mass Balance and Heat Balance

Through the mass balance and thermal balance calculation for a typical OxyCup （or OxiCup） furnace process featuring a capacity of 380 kt/a of steel plant residuMs, the material flow and thermal flow diagrams were firstly obtained. Then, the performance of the main fuel in the OxyCup process, i.e. coke and carbon dust, was ana lyzed, and the results indicated that coke was mainly used as the stock column skeleton for the furnace and exothermal agent with a weak reduction ability; whereas carbon dust was mixed in the C-brick to reduce the iron oxide. In addition, the comparison between OxyCup process and traditional blast furnace process indicated that the reduction and melting processes in the OxyCup process were relatively isolated, while in the traditional blast furnace process, they were mixed with each other in the high temperature zone. Moreover, oxidizing atmosphere is necessary in part of the OxyCup furnaces to ensure the complete combustion of part of the coke, while only reducing atmosphere is al lowed in traditional blast furnaces. Finally, it was confirmed that oxygen enrichment can make a remarkable increase of the energy income and high temperature blast makes oMy a small contribution to energy income as the energy from the combustion of carbon takes up nearly 90% of the total income.