Morphology evolution of prior β grains of laser solid forming （LSF） Ti-xAl-yV （x 11,y 20） alloys from blended elemental powders is investigated. The formation mechanism of grain morphology is revealed by incorpor...Morphology evolution of prior β grains of laser solid forming （LSF） Ti-xAl-yV （x 11,y 20） alloys from blended elemental powders is investigated. The formation mechanism of grain morphology is revealed by incorporating columnar to equiaxed transition （CET） mechanism during solidification. The morphology of prior β grains of LSF Ti-6Al-yV changes from columnar to equiaxed grains with increasing element V content from 4 to 20 wt.-%. This agrees well with CET theoretical prediction. Likewise, the grain morphology of LSF Ti-xAl-2V from blended elemental powders changes from large columnar to small equiaxed with increasing Al content from 2 to 11 wt.-%. The macro-morphologies of LSF Ti-8Al-2V and Ti-11Al-2V from blended elemental powders do not agree with CET predictions. This is caused by the increased disturbance effects of mixing enthalpy with increasing Al content, generated in the alloying process of Ti, Al, and V in the molten pool.展开更多
Polypropylene （PP）/polybutene-1 （PB） alloys within reactor were prepared by MgCl2-supported Ziegler-Natta catalyst with sequential two-stage polymerization technology. First, propylene homo-polymerizations were ca...Polypropylene （PP）/polybutene-1 （PB） alloys within reactor were prepared by MgCl2-supported Ziegler-Natta catalyst with sequential two-stage polymerization technology. First, propylene homo-polymerizations were carried out to form isotactic polypropylene （iPP） particles containing active catalyst. Then, butene-1 was subsequently polymerized to form polybutene-1 phase inside the iPP particles. Finally, iPP/PB alloys with spherical shape and adjustable PB content were synthesized. The catalytic activity and catalytic stereospecificity of the Z-N catalyst in the two-stage polymerization process are discussed. The composition and physical properties of the PP alloys were characterized by FT-IR, 13C-NMR, SEM, DSC and XRD. It was found that the in-reactor PP alloys are mainly composed of PP and PB with a little amount of poly（butene- co-propylene） random copolymers and poly（butene-block-propylene） block copolymers. SEM measurements verified that the PB phases with size in the range of 300-400 nm dispersed in the PP matrix uniformly. The incorporation of PB upon the PP matrix affects the properties of final products greatly.展开更多
基金supported by the State Key Laboratory of Solidification Processing in NWPU (Nos.SKLSP201102 and 06-BZ-2010)Lthe China Postdoc-toral Science Foundation (No.20100470040)the National Natural Science Foundation of China (No.50871089)
文摘Morphology evolution of prior β grains of laser solid forming （LSF） Ti-xAl-yV （x 11,y 20） alloys from blended elemental powders is investigated. The formation mechanism of grain morphology is revealed by incorporating columnar to equiaxed transition （CET） mechanism during solidification. The morphology of prior β grains of LSF Ti-6Al-yV changes from columnar to equiaxed grains with increasing element V content from 4 to 20 wt.-%. This agrees well with CET theoretical prediction. Likewise, the grain morphology of LSF Ti-xAl-2V from blended elemental powders changes from large columnar to small equiaxed with increasing Al content from 2 to 11 wt.-%. The macro-morphologies of LSF Ti-8Al-2V and Ti-11Al-2V from blended elemental powders do not agree with CET predictions. This is caused by the increased disturbance effects of mixing enthalpy with increasing Al content, generated in the alloying process of Ti, Al, and V in the molten pool.
基金financially supported by the National Natural Science Foundation of China(Nos.21174074,20774098)National Scientific Supporting Program from Ministry of Science and Technology of China(No.2011BAE26B05)
文摘Polypropylene （PP）/polybutene-1 （PB） alloys within reactor were prepared by MgCl2-supported Ziegler-Natta catalyst with sequential two-stage polymerization technology. First, propylene homo-polymerizations were carried out to form isotactic polypropylene （iPP） particles containing active catalyst. Then, butene-1 was subsequently polymerized to form polybutene-1 phase inside the iPP particles. Finally, iPP/PB alloys with spherical shape and adjustable PB content were synthesized. The catalytic activity and catalytic stereospecificity of the Z-N catalyst in the two-stage polymerization process are discussed. The composition and physical properties of the PP alloys were characterized by FT-IR, 13C-NMR, SEM, DSC and XRD. It was found that the in-reactor PP alloys are mainly composed of PP and PB with a little amount of poly（butene- co-propylene） random copolymers and poly（butene-block-propylene） block copolymers. SEM measurements verified that the PB phases with size in the range of 300-400 nm dispersed in the PP matrix uniformly. The incorporation of PB upon the PP matrix affects the properties of final products greatly.
