A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-...A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-body UAV configuration;the second is to analyze the aerodynamics of the geometric model;the third is to create aerodynamic surrogate model;and the final step is to predict the trim drag using the surrogate model.Hence,a tool for trim drag prediction is developed by integration of the four steps.The impacts of the allocation of control surfaces,position of gravity center and planform parameters on the trim drag are investigated by using the tool.Results show that using the control surface in outer wing for trim has an advantage of lower trim drag,and the position of gravity center has a primary impact on the trim drag.Moreover,the planform has secondary impacts on the trim drag.展开更多
Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configurati...Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation'. The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.展开更多
The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is s...The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass(MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.展开更多
The blended-wing-body shape vehicle is a new type of water surface vehicle with a large square coefficient. The interference of the wave systems under a high speed condition is more significant for the blended-wing-bo...The blended-wing-body shape vehicle is a new type of water surface vehicle with a large square coefficient. The interference of the wave systems under a high speed condition is more significant for the blended-wing-body shape vehicle and the dynamic characteristics of the new type vehicle are very different from that of a traditional vehicle. In this paper, the implicit volume of fluid（VOF） method is adopted to simulate the wave resistance of the high speed blended wing body vehicle, and a semi-relative reference frame method is proposed to compute the maneuvering coefficients. The effects of the navigation speed, the drift angle and the rotating radius are studied. The dimensional analysis method is used to assess the influence of Fr and L/R on the results. The wave making resistance coefficient against the speed sees a large fluctuation because of the serious wave interference. The lateral rotation maneuvering characteristics under the surface navigation condition is nonlinear and more complex than under the under water condition, which is quite different to control.展开更多
Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with nu...Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with numerical simulations. The philosophy of channeling flow and avoiding the throat effect on the nacelle and airframe is established based on the analysis of flow interference in the initial configuration. A parametric integration design method is proposed from twodimensional plane to three-dimensional space with control mechanisms and selection principles of the key parameters determined by their influences. Results show that strong shock waves and flow separation can be successfully eliminated under the influence of both the reshaped channel and decelerated inflow below the nacelle. Supersonic regions around the nacelle are effectively reduced, concentrating mainly on the lip position. Thus, a significant cruise drag reduction(8.7%) is achieved though the pressure drag of the nacelle increases.展开更多
This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design id...This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.展开更多
This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation mo...This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation models. The wing aerodynamic shape optimization problem is solved by dividing optimization into three steps—modeling 3D（high-fidelity） and 2D（lowfidelity） models, building global meta-models from prominent instead of all variables, and determining robust optimizing shape associated with tuning local meta-models. The adaptive robust design optimization aims to modify the shape optimization process. The sufficient infilling strategy—known as adaptive uniform infilling strategy—determines search space dimensions based on the last optimization results or initial point. Following this, 3D model simulations are used to tune local meta-models. Finally, the global optimization gradient-based method—Adaptive Filter Sequential Quadratic Programing（AFSQP） is utilized to search the neighborhood for a probable optimum point. The effectiveness of the proposed method is investigated by applying it, along with conventional optimization approach-based meta-models, to a Blended Wing Body（BWB） Unmanned Aerial Vehicle（UAV）. The drag coefficient is defined as the objective function, which is subjected to minimum lift coefficient bounds and stability constraints. The simulation results indicate improvement in meta-model accuracy and reduction in computational time of the method introduced in this paper.展开更多
Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal a...Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal and directional static stability and damping.In this paper,the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied.According to the differences in flight characteristics of BWB aircraft and conventional aircraft,the different airworthiness requirements for BWB aircraft are analyzed:first,based on current airworthiness regulations and transport aircraft flying quality specification,the relaxation requirement of longitudinal static stability for BWB aircraft is studied;second,the influences of podded engines on longitudinal trim,attitude and trajectory responses and maximum directional control power requirement of BWB aircraft are analyzed;third,the changes in the proportional relationships between the takeoff characteristic speeds of the example BWB aircraft are analyzed.In view of these variations in directional control power requirement and relationships between takeoff characteristic speeds,new recommendations for airworthiness evaluation are proposed for BWB aircraft.The conclusions of this paper are helpful references for configuration design,flight control law design and airworthiness evaluation of BWB aircraft.展开更多
基金supported by the National Defense Basic Scientific Research Program of China(No.A2520110006)the Fundamental Research Funds for the Central Universities(Nos.NJ20130001,NJ2012014)
文摘A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-body UAV configuration;the second is to analyze the aerodynamics of the geometric model;the third is to create aerodynamic surrogate model;and the final step is to predict the trim drag using the surrogate model.Hence,a tool for trim drag prediction is developed by integration of the four steps.The impacts of the allocation of control surfaces,position of gravity center and planform parameters on the trim drag are investigated by using the tool.Results show that using the control surface in outer wing for trim has an advantage of lower trim drag,and the position of gravity center has a primary impact on the trim drag.Moreover,the planform has secondary impacts on the trim drag.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. 3102019JC009 and G2016KY0002)
文摘Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation'. The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.
基金supported by the National Natural Science Foundation of China (No. 11432007)
文摘The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass(MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.
基金Project supported by the National Key Research and Development Program of China(Grant No.2016YFC0300802)the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2015015)
文摘The blended-wing-body shape vehicle is a new type of water surface vehicle with a large square coefficient. The interference of the wave systems under a high speed condition is more significant for the blended-wing-body shape vehicle and the dynamic characteristics of the new type vehicle are very different from that of a traditional vehicle. In this paper, the implicit volume of fluid（VOF） method is adopted to simulate the wave resistance of the high speed blended wing body vehicle, and a semi-relative reference frame method is proposed to compute the maneuvering coefficients. The effects of the navigation speed, the drift angle and the rotating radius are studied. The dimensional analysis method is used to assess the influence of Fr and L/R on the results. The wave making resistance coefficient against the speed sees a large fluctuation because of the serious wave interference. The lateral rotation maneuvering characteristics under the surface navigation condition is nonlinear and more complex than under the under water condition, which is quite different to control.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. 3102019JC009 and G2016KY0002)
文摘Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with numerical simulations. The philosophy of channeling flow and avoiding the throat effect on the nacelle and airframe is established based on the analysis of flow interference in the initial configuration. A parametric integration design method is proposed from twodimensional plane to three-dimensional space with control mechanisms and selection principles of the key parameters determined by their influences. Results show that strong shock waves and flow separation can be successfully eliminated under the influence of both the reshaped channel and decelerated inflow below the nacelle. Supersonic regions around the nacelle are effectively reduced, concentrating mainly on the lip position. Thus, a significant cruise drag reduction(8.7%) is achieved though the pressure drag of the nacelle increases.
文摘This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.
文摘This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation models. The wing aerodynamic shape optimization problem is solved by dividing optimization into three steps—modeling 3D（high-fidelity） and 2D（lowfidelity） models, building global meta-models from prominent instead of all variables, and determining robust optimizing shape associated with tuning local meta-models. The adaptive robust design optimization aims to modify the shape optimization process. The sufficient infilling strategy—known as adaptive uniform infilling strategy—determines search space dimensions based on the last optimization results or initial point. Following this, 3D model simulations are used to tune local meta-models. Finally, the global optimization gradient-based method—Adaptive Filter Sequential Quadratic Programing（AFSQP） is utilized to search the neighborhood for a probable optimum point. The effectiveness of the proposed method is investigated by applying it, along with conventional optimization approach-based meta-models, to a Blended Wing Body（BWB） Unmanned Aerial Vehicle（UAV）. The drag coefficient is defined as the objective function, which is subjected to minimum lift coefficient bounds and stability constraints. The simulation results indicate improvement in meta-model accuracy and reduction in computational time of the method introduced in this paper.
基金supported by the Fundamental Research Funds for the Central Universities of China (No. YWF-21-BJ-J-935)
文摘Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal and directional static stability and damping.In this paper,the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied.According to the differences in flight characteristics of BWB aircraft and conventional aircraft,the different airworthiness requirements for BWB aircraft are analyzed:first,based on current airworthiness regulations and transport aircraft flying quality specification,the relaxation requirement of longitudinal static stability for BWB aircraft is studied;second,the influences of podded engines on longitudinal trim,attitude and trajectory responses and maximum directional control power requirement of BWB aircraft are analyzed;third,the changes in the proportional relationships between the takeoff characteristic speeds of the example BWB aircraft are analyzed.In view of these variations in directional control power requirement and relationships between takeoff characteristic speeds,new recommendations for airworthiness evaluation are proposed for BWB aircraft.The conclusions of this paper are helpful references for configuration design,flight control law design and airworthiness evaluation of BWB aircraft.
