Synthesis and Characterization of the Polyacrylonitrile-block- poly(methyl acrylate) by RAFT Technique

Polyacrylonitrile-block-poly（methyl acrylate）（P（AN-b-MA）） was synthesized by reversible addition-fragmentation chain transfer （RAFT） polymerization employing macro-RAFT agent （PAN-RAFT） as the chain transfer agent and azobis（isobutyronitrile） （AIBN） as the initiator. A linear relationship between ln（[M]0/[M]1） and reaction time was observed. The molecular structure of P（AN-b-MA） was characterized by ^1H-NMR, element analysis, FTIR and SEC. The molecular weight distribution （MWD） was less than 1.40, the Mn could be controled from 0.733 to 4.834×10^4, and the molar content of MA in P（AN-b-MA） were from 15.6 to 75.0 percentage, respectively.

SYNTHESIS AND CHARACTERIZATION OF WELL-DEFINED BLOCK COPOLYMERS CONTAINING PENDANT,SELF-COMPLEMENTARY QUADRUPLE HYDROGEN BONDING SITES

The title block copolymer (defined as PSUEA) containing pendant,self-complementary quadruple hydrogen bonding sites has been prepared successfully by three steps.First,poly(styrene-b-2-hydroxyethyl acrylate) (defined as PSHEA) was prepared by living radical polymerizing 2-hydroxyethyl acrylate (HEA) initiated by polystyrene (PSt) macro- initiator,which was prepared via nitroxide-mediated polymerization (NMP) technique.After treated by excessive 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate (IPDI),...

CONTROLLED SYNTHESIS OF AMPHIPHILIC BLOCK POLYMERS HAVING GLUCOSE RESIDUES AND THEIR STRUCTURE FORMATION

Vinyl ether (VE)-based amphiphilic block copolymers with D-glucose residues as hydrophilicpendants were synthesized by CH_3 CH(OiBu)Cl/ZnI_2-initiated sequential living cationic copolymerization of3-O-(vinyloxy)ethyl-1, 2:5, 6-di-O-isopropylidene-D-glucofuranose (IGVE) and isobutyl VE (IBVE ) andsubsequent deprotection. The precursor block copolymers had a narrow molecular weight distribution(M_w/M_n～1.1) and a controlled segmental composition. The solubility characteristics of the amphiphiliccopolymer depended strongly on composition. Their solvent-cast thin films were examined, under atransmission electron microscope, and could be seen to exhibit various microphase-separated surfacemorphologies such as spheres, cylinders, and lamellae, depending on composition. The amphiphiliccopolymers with the appropriate segmental composition were found to form a stable monolayer at the air-water interface, which was successfully transferred onto a substrate by the Langmuir-Blodgett (LB)technique. The layered strucfure of the built-up LB films was controlled by blending the homopolymer.

A strong adhesive block polymer coating for antifouling of large molecular weight protein

Some proteins secreted by microorganisms have large molecular weights. We report here an approach to prepare coating by multilayer polymers for antifouling of proteins, especially the proteins with a large molecular weight.Stainless steel was used as the model substrate. The substrate was first coated with a hybrid polymer film, which was formed by simultaneous hydrolytic polycondensation of 3-aminopropyltriethoxysilane and polymerization of dopamine(HPAPD). After grafting the macroinitiator 2-bromoisobutyryl bromide, the block polymer brushes PMMA-b-PHEMA were grafted. Three proteins were used to test protein adsorption and antifouling behavior of the coating, including recombinant green fluorescent(54 k Da), recombinant R-transaminase(2 × 90 k Da), and recombinant catalase(4 × 98 k Da). It is demonstrated that the block polymer brushes not only can prevent the adsorption of small molecular weight proteins, but also can significantly reduce the adsorption of the large molecular weight proteins.

Synthesis of α-Bromine-Terminated Polystyrene Macroinitiator and Its Initiation of MMA Polymerization by ATRP

In the present paper the synthesis of block copolymers via the transformation from living anionic polymerization (LAP) to atom transfer radical polymerization (ATRP) was described. α-Bromine-terminated polystyrenes(PStBr) in the LAP step was prepared by using n-BuLi as initiator, tetrahydrofuran (THF) as the activator, α-methylstyrene (α-MeSt) as the capping group and liquid bromine (Br_2) as the bromating agent. The effects of reaction conditions such as the amounts of α-MeSt, THF, and Br_2 as well as molecular weight of polystyrene on the bromating efficiency (BE) and coupling extent (CE) were examined. The present results show that the yield of PStBr obtained was more than 93. 8% and the coupling reaction was substantially absent. PStBr was further used as the macroinitiator in the polymerization of methyl-methacrylate (MMA) in the presence of copper (I ) halogen and 2, 2' -bipyridine (bpy) complexes. It was found that the molecular weight of the resulted PSt-b-PMMA increased linearly with the increase of the conversion of MMA and the polydispersity was 1. 2-1.6. The structures of PStBr and P(St-b-MMA) were characterized by ~1H NMR spectra.

Polymerization of lactide and synthesis of block copolymer catalyzed by copper(Ⅱ) Schiff base complex

In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization （ROP） of lactide and block polymerization of poly（lactide） with po/y（ethylene glycol）methyl ether,

Polyethylene glycol/polylactic acid block co‐polymers as solid–solid phase change materials

Phase change materials(PCMs)are promising thermal energy storage materials due to their high specific latent heat.Conventional PCMs typically exploit the solid–liquid(s–l)transition.However,leakage and leaching are common issues for solid–liquid PCMs,which have to be addressed before usage in practical applications.In contrast,solid–solid(s–s)PCMs would naturally overcome these issues due to their inherent form stability and homogeneity.In this study,we report a new type of s–s PCM based on chemically linked polyethylene glycol(PEG,the PCM portion)with polylactic acid(PLA,the support portion)in the form of a block co‐polymer.Solid‐solid latent heat of up to 56 J/g could be achieved,with melting points of between 44°C and 55°C.For comparison,PEG was physically mixed into a PLA matrix to form a PEG:PLA composite.However,the composite material saw leakage of up to 9%upon heating,with a corresponding loss in thermal storage capacity.In contrast,the mPEG/PLA block co‐polymers were found to be completely homogeneous and thermally stable even when heated above its phase transition temperature,with no observable leakage,demonstrating the superiority of chemical linking strategies in ensuring form stability.

pH-Responsive polymer boosts cytosolic siRNA release for retinal neovascularization therapy

Small interfering RNA(siRNA)has a promising future in the treatment of ocular diseases due to its high efficiency,specificity,and low toxicity in inhibiting the expression of target genes and proteins.However,due to the unique anatomical structure of the eye and various barriers,delivering nucleic acids to the retina remains a significant challenge.In this study,we rationally design PACD,an A-B-C type non-viral vector copolymer composed of a hydrophilic PEG block(A),a siRNA binding block(B)and a pH-responsive block(C).PACDs can self-assemble into nanosized polymeric micelles that compact siRNAs into polyplexes through simple mixing.By evaluating its pH-responsive activity,gene silencing efficiency in retinal cells,intraocular distribution,and anti-angiogenesis therapy in a mouse model of hypoxia-induced angiogenesis,we demonstrate the efficiency and safety of PACD in delivering siRNA in the retina.We are surprised to discover that,the PACD/siRNA polyplexes exhibit remarkable intracellular endosomal escape efficiency,excellent gene silencing,and inhibit retinal angiogenesis.Our study provides design guidance for developing efficient nonviral ocular nucleic acid delivery systems.

Spectroscopic investigation on chirality transfer in additive-driven self-assembly of block polymers

Chiral supramolecules prepared by the additive-driven self-assembly of block copolymers provide a facile method to construct helical nanostructures. In this study, we investigated the chiral transfer from chiral tartaric acid to poly（styrene）-b-poly（ethylene oxide） using small-angle X-ray scattering,transmission electron microscopy, circular dichroism, and vibrational circular dichroism. The results showed that the chirality was transferred to both the segments of block copolymer irrespective of the interaction with the chiral additives and formation of helical phase structure. However, the chirality transfer was carried out using different methods： for poly（ethylene oxide） segments, the chirality transfer was carried out via direct hydrogen bond formation; for polystyrene segments, the chirality transfer was carried out via the cooperative motion of block copolymers during the thermal annealing.

Synthesis and Self-assembly of a Triarm Star-shaped Rod-Rod Block Copolymer

We designed and synthesized a triarm star-shaped rod-rod block copolymer（BCP）,（poly{2,5-bis[（4-methoxyphenyl）-oxycarbonyl]styrene}-block-poly（γ-benzyl-L-glutamate））3,（PMPCS-b-PBLG）3. The triarm core with three PMPCS-N3 segments was prepared by copper-mediated atom transfer radical polymerization of 2,5-bis[（4-methoxyphenyl）-oxycarbonyl]styrene initiated by a trifunctional initiator and a subsequent azide reaction. And the PBLG block with alkyne functionality was synthesized through ring-opening polymerization of γ-benzyl-L-glutamate N-carboxyanhydride initiated by propargylamine. Finally, Huisgen＇s 1,3-dipolar cycloaddition was employed to combine the triarm（PMPCS-N3）3 and PBLG segments. The chemical structure of the BCP was confirmed by 1H-NMR spectroscopy, Fourier-transform infrared spectroscopy, and gel permeation chromatographic analysis. Results from differential scanning calorimetry, polarized light microscopy, one-dimensional and two-dimensional wide-angle X-ray diffraction, and transmission electron microscopy techniques demonstrate that the triarm star-shaped rod-rod BCP self-assembles into a hexagon-in-lamella morphology, with the PMPCS block in the columnar nematic phase and the PBLG block in the hexagonal columnar arrangement packed in bilayers due to the rigid nature of the two blocks and the covalent connections in the star-shaped BCP.

Preparation of porous polyimide microspheres by thermal degradation of block copolymers

A new preparation method has been developed for thermally stable porous polyimide microspheres. Porous polyimide microspheres were prepared using trib]ock copolymers that consisted of a thermally stable polyimide derived from pyromellitic dianhydride/4,4＇-oxydianiline as the continuous phase and a thermally labile polyether as the dispersed phase. Spheres of copolymers were generated in a nonaqueous emulsion and then gradually heated to complete the imidization to form a microphase-separated structure. Subsequently, thermal treatment at a slightly reduced pressure removed the labile blocks and produced pores. Under suitable decomposition conditions, the pore size of the porous polyimide was in the range of 200-400nm.

Nanoscale 3D ordered polymer networks

Structures having nanoscale 3D geometries are valuable as multifunctional materials, where multi-continuous microphases can synergistically influence mechanical, optical, transport and other properties. Such very high interface surface to volume ratio structures occur in a variety of materials including natural materials such as butter fly wings and sea urchin exoskeletons and in synthetic self-assembled structures such as surfactant/water systems and block polymers. Quantitative morphological characterization of such complex geometric structures is quite challenging. Unit cell sizes range from 10-300 nm with corresponding feature sizes on the 2-50 nm scale. Since these nanoscale network structures are bicontinuous, when one constituent is removed, the structure is still self supporting. Removal of one component produces a nanoporous material that may be in-filled with another component, or the surfaces of the nanopores can be coated with ultra-thin layers by atomic layer deposition to offer multiftmctional capabilities. Due to the ability to individually tailor the properties of the network（s） and matrix, for example, to create strong dielectric or impedance contrast, such spatially periodic structures are excellent for the interference of waves （electromagnetic for photonic applications and acoustic for phononic applications） that can lead to bandgaps and hence the control of wave propagation in the material. This mini-review will focus on networks formed by bottom up self assembly of block polymers. In addition to structural issues, we emphasize the special physical properties related to bi- or tri-continuous networks.

Polymers with complicated architectures constructed from the versatile, functional monomer 1-ethoxyethyl glycidyl ether

Because glycidyl(Gly) contains an epoxy and an active hydroxyl group, the Gly unit is difficult to introduce into certain polymeric chains in a controlled manner and usually yields hyperbranched polyglycidyl. Alternatively, the monomer 1-ethoxyethyl glycidyl ether(EEGE), derived from Gly and ethyl vinyl ether, has shown potential for application in polymer chemistry, and homopolymerization of this monomer directly produces linear poly(1-ethoxyethyl glycidyl ether) and further yields linear polyglycidyl. In this review, the initiation system of the EEGE monomer is first discussed in terms of chain transfer to monomers in ring-opening polymerization of epoxides with substituent groups. Then, random copolymerization of EEGE with other epoxides is considered. In addition, because the EEGE units on polymers can be transferred to Gly units and further used to construct copolymers with complicated architectures, the applications of EEGE monomers to block, graft, and hyperbranched copolymers are reviewed. Finally, the synthesis of main chain and terminal functional polyethers by transforming the hydroxyl groups at the polymer end or on the main chain into certain functional groups are also discussed. Chemistry based on EEGE has been proved to be an efficient, versatile route to constructing copolymers containing Gly units and ultimately yielding the target properties and applications.