Exploration on the Optimization Strategy for the Layup of Composite Material Pressure Vessels Based on Advanced Algorithms

This study aims to explore the influence of the laying angle on the pressure shell structure made of composite materials under the condition of a fixed shape. By using a composite material composed of a mixture of T800 carbon fiber and AG80 epoxy resin to design pressure vessels, this material combination can significantly improve the interlaminar shear strength and heat resistance. The article elaborates on the basic concepts and failure criteria of composite materials, such as the maximum stress criterion, the maximum strain criterion, the Tsai-Hill criterion, etc. With the help of the APDL parametric modeling language, the arc-shaped, parabolic, elliptical, and fitting curve-shaped pressure vessel models are accurately constructed, and the material property settings and mesh division are completed. Subsequently, APDL is used for static analysis, and the genetic algorithm toolbox built into Matlab is combined to carry out optimization calculations to determine the optimal laying angle. The research results show that the equivalent stress corresponding to the optimal laying angle of the arc-shaped pressure vessel is 5.3685e+08 Pa, the elliptical one is 5.1969e+08 Pa, the parabolic one is 5.8692e+08 Pa, and the fitting curve-shaped one is 5.36862e+08 Pa. Among them, the stress distribution of the fitting curve-shaped pressure vessel is relatively more uniform, with a deformation of 0.568E−03 m, a minimum equivalent stress value of 0.261E+09 Pa, a maximum equivalent stress value of 0.537E+09 Pa, and a ratio of 0.48, which conforms to the equivalent stress criterion. In addition, the fitting curve of this model can adapt to various models and has higher practical value. However, the stress distribution of the elliptical and parabolic pressure vessels is uneven, and their applicability is poor. In the future, further exploration can be conducted on the application of the fitting curve model in composite materials to optimize the design of pressure vessels. This study provides important theoretical support and practical guidance for the design of composite material pressure vessels.

Reduction of photodynamic damage of blood vessels in the protected region by(–)-epigallocatechin gallate

Photodynamic therapy(PDT)has been increasingly used in the clinical treatment of neoplastic,inflammatory and infectious skin diseases.However,the generation of reactive oxygen species(ROS)may induce undesired side effects in normal tissue surrounding the treatment lesion,which is a big challenge for the clinical application of PDT.To date,(–)-Epigallocatechin gallate(EGCG)has been widely proposed as an antiangiogenic and antitumor agent for the protection of normal tissue from ROS-mediated oxidative damage.This study evaluates the regulation ability of EGCG for photodynamic damage of blood vessels during hematoporphyrin monomethyl ether(Hemoporfin)-mediated PDT.The quenching rate constants of EGCG for the triplet-state Hemoporfin and photosensitized 1O2 generation are determined to be 6.8×10^(8)M^(−1)S^(−1),respectively.The vasoconstriction of blood vessels in the protected region treated with EGCG hydrogel after PDT is lower than that of the control region treated with pure hydrogel,suggesting an efficiently reduced photodamage of Hemoporfin for blood vessels treated with EGCG.This study indicates that EGCG is an efficient quencher for triplet-state Hemoporfin and 1O2,and EGCG could be potentially used to reduce the undesired photodamage of normal tissue in clinical PDT.

Construction of Oriented Structure in Inner Surface of Small-Diameter Artificial Blood Vessels:A Review

There is an urgent need for small-diameter artificial blood vessels in clinic.Physical,chemical and biological factors should be integrated to avoid thrombosis and intimal hyperplasia after implantation and to promote successful fabrication of small-diameter artificial blood vessels.From a physical perspective,the internal oriented structures of natural blood vessels plays an important role in guiding the directional growth of cells,improving the blood flow environment,and promoting the regeneration of vascular tissue.In this review,the effects of the oriented structures on cells,including endothelial cells(ECs),smooth muscle cells(SMCs)and stem cells,as well as the effect of the oriented structures on hemodynamics and vascular tissue remodeling and regeneration are introduced.Various forms of oriented structures(fibers,grooves,channels,etc.)and their construction methods are also reviewed.Conclusions and future perspectives are given.It is expected to give some references to relevant researches.

Lowering fasting blood glucose with non-dialyzable material of cranberry extract is dependent on host genetic background,sex and diet

Background:Type 2 diabetes(T2D)is a polygenic metabolic disease,character-ized by high fasting blood glucose(FBG).The ability of cranberry(CRN)fruit to regulate glycemia in T2D patients is well known.Here,a cohort of 13 lines of the genetically diverse Collaborative Cross(CC)mouse model was assessed for the effect of non-dialyzable material(NDM)of cranberry extract in lowering fasting blood glucose.Methods:Eight-week-old mice were maintained on either a standard chow diet(con-trol group)or a high-fat diet(HFD)for 12 weeks,followed by injections of intraperi-toneal(IP)NDM(50 mg/kg)per mouse,three times a week for the next 6 weeks.Absolute FBG(mg/dl)was measured bi-weekly and percentage changes in FBG(%FBG)between weeks 0 and 12 were calculated.Results:Statistical analysis showed a significant decrease in FBG between weeks 0 and 12 in male and female mice maintained on CHD.However,a non-significant in-crease in FBG values was observed in male and female mice maintained on HFD dur-ing the same period.Following administration of NDM during the following 6 weeks,the results show a variation in significant levels of FBG lowering between lines,male and female mice and under the different diets.Conclusion:The results suggest that the efficacy of NDM treatment in lowering FGB depends on host genetic background(pharmacogenetics),sex of the mouse(phar-macosex),and diet(pharmacodiet).All these results support the need for follow-up research to better understand and implement a personalized medicine approach/uti-lization of NDM for reducing FBG.

Protocol to study the effects of AMPK-mTOR/PINK-Parkin dual signaling pathways on the formation of coronary heart disease showing blood stasis symptom pattern based on traditional Chinese medicine theory of“heart governing blood and vessels”

In this study,we aim to combine gene transfection techniques with the modeling methods previously employed by the research group to deeply investigate the corresponding theories of traditional Chinese medicine regarding“myocardial energy metabolism”and“aortic thrombosis”.Our goal is to elucidate the biological mechanism underlying the occurrence and development of coronary heart disease with blood stasis syndrome from the perspectives of“heart and vessels”and“Qi(in traditional Chinese medicine,it refers to the most fundamental and subtle substances that constitute the human body and maintain life activities.At the same time,it also has the meaning of physiological function.In terms of traditional Chinese medicine,Qi and different words are used together to express different meanings)and blood”.The research content is divided into four modules as follows:1.establishment of an animal model of coronary heart disease with blood stasis syndrome through fibrinogen overexpression.2.Investigation of the mitochondrial quality control system in coronary heart disease with blood stasis syndrome under fibrinogen overexpression.3.Study of platelet autophagy in coronary heart disease with blood stasis syndrome under fibrinogen overexpression.4.Examination of the relationship between the AMPK-mTOR pathway and metabolism in platelet autophagy of coronary heart disease with blood stasis syndrome under fibrinogen overexpression.Ninety-six Sprague Dawley rats will be randomly assigned to the following groups:control group,model group,fibrinogen group and adeno-associated virus group.All rats will undergo a 14-week model construction process,and modern molecular biology methods will be employed to evaluate the model and examine relevant research indicators.The obtained data will be analyzed according to a predefined statistical analysis plan.

Thermo-magnetic analysis of thick-walled spherical pressure vessels made of functionally graded materials

This study presents an analytical solution of thermal and mechanical displacements, strains, and stresses for a thick-walled rotating spherical pressure vessel made of functionally graded materials (FGMs). The pressure vessel is subject to axisymmetric mechanical and thermal loadings within a uniform magnetic field. The material properties of the FGM are considered as the power-law distribution along the thickness. Navier’s equation, which is a second-order ordinary differential equation, is derived from the mechanical equilibrium equation with the consideration of the thermal stresses and the Lorentz force resulting from the magnetic field. The distributions of the displacement, strains, and stresses are determined by the exact solution to Navier’s equation. Numerical results clarify the influence of the thermal loading, magnetic field, non-homogeneity constant, internal pressure, and angular velocity on the magneto-thermo-elastic response of the functionally graded spherical vessel. It is observed that these parameters have remarkable effects on the distributions of radial displacement, radial and circumferential strains, and radial and circumferential stresses.

Tissue engineering of blood vessels with endothelial cells differentiated from mouse embryonic stem cells

Endothelial cells (TEC_3 cells) derived from mouse embryonic stem (ES) cells were used as seed cells to construct blood vessels. Tissue engineered blood vessels were made by seeding 8 × 10~6 smooth muscle cells (SMCs) obtained from rabbit arteries onto a sheet of nonwoven polyglycolic acid (PGA) fibers, which was used as a biodegradable polymer scaffold. After being cultured in DMEM medium for 7 days in vitro, SMCs grew well on the PGA fibers, and the cell-PGA sheet was then wrapped around a silicon tube, and implanted subcutaneously into nude mice. After 6～8 weeks, the silicon tube was replaced with another silicon tube in smaller diameter, and then the TEC_3 cells (endothelial cells differentiated from mouse ES cells) were injected inside the engineered vessel tube as the test group. In the control group only culture medium was injected. Five days later, the engineered vessels were harvested for gross observation, histological and immunohistochemical analysis. The preliminary results demonstrated that the SMC-PGA construct could form a tubular structure in 6～8 weeks and PGA fibers were completely degraded. Histological and immunohistochemical analysis of the newly formed tissue revealed a typical blood vessel structure, including a lining of endothelial cells (ECs) on the lumimal surface and the presence of SMC and collagen in the wall. No EC lining was found in the tubes of control group. Therefore, the ECs differentiated from mouse ES cells can serve as seed cells for endothelium lining in tissue engineered blood vessels.

Automated retinal blood vessels segmentation based on simplified PCNN and fast 2D-Otsu algorithm

According to the characteristics of dynamic firing in pulse coupled neural network (PCNN) and regional configuration in retinal blood vessel network, a new method combined with simplified PCNN and fast 2D-Otsu algorithm was proposed for automated retinal blood vessels segmentation. Firstly, 2D Gaussian matched filter was used to enhance the retinal images and simplified PCNN was employed to segment the blood vessels by firing neighborhood neurons. Then, fast 2D-Otsu algorithm was introduced to search the best segmentation results and iteration times with less computation time. Finally, the whole vessel network was obtained via analyzing the regional connectivity. Experiments implemented on the public Hoover database indicate that this new method gets a 0.803 5 true positive rate and a 0.028 0 false positive rate on an average. According to the test results, compared with Hoover algorithm and method of PCNN and 1D-Otsu, the proposed method shows much better performance.

A Comparative Study Between Tumor Blood Vessels and Dynamic Contrast-enhanced MRI for Identifying Isocitrate Dehydrogenase Gene 1(IDH1)Mutation Status in Glioma

Objective Isocitrate dehydrogenase gene(IDH)mutations are associated with tumor angiogenesis and therefore play an important role in glioma management.This study compared the performance of tumor blood vessels counted from contrast-enhanced 3D brain volume(3D-BRAVO)sequence and dynamic contrast-enhanced(DCE)MRI in differentiating IDH1 status in gliomas.Methods Forty-four glioma patients[16 with IDH1 mutant-type(IDH1-MT),28 with IDH1 wild-type(IDH1-WT)]were retrospectively analyzed.A blood vessel entering a tumor was defined as an intratumoral vessel;a blood vessel adjacent to the edge of a tumor was defined as a peritumoral vessel.Combined vessels were defined as the sum of the intratumoral and peritumoral vessels.DCE-derived metrics of tumor were normalized to the contralateral normal-appearing white matter.Results Intratumoral,peritumoral,and combined tumor blood vessels were all significantly different between IDH1-MT and IDH1-WT gliomas,and the range of area under curves(AUCs)was 0.816–0.855.For DCE-derived parameters,cerebral blood volume,cerebral blood flow,mean transit time,and volume transfer constant were significantly different between IDH1-MT and IDH1-WT gliomas,and the range of AUCs was 0.703–0.756.Combined vessels possessed the best performance for identifying IDH1 mutations in gliomas(AUC:0.855,sensitivity:0.857,specificity:0.812,P<0.001).Conclusion The number of tumor blood vessels has comparable diagnostic performance with DCE-derived parameters for differentiating IDH1 mutations and can serve as a potential imaging biomarker to reflect IDH1 mutations in gliomas.

Blood Vessel Segmentation with Classification Model for Diabetic Retinopathy Screening

Biomedical image processing is finding useful in healthcare sector for the investigation,enhancement,and display of images gathered by distinct imaging technologies.Diabetic retinopathy(DR)is an illness caused by diabetes complications and leads to irreversible injury to the retina blood vessels.Retinal vessel segmentation techniques are a basic element of automated retinal disease screening system.In this view,this study presents a novel blood vessel segmentation with deep learning based classification(BVS-DLC)model forDRdiagnosis using retinal fundus images.The proposed BVS-DLC model involves different stages of operations such as preprocessing,segmentation,feature extraction,and classification.Primarily,the proposed model uses the median filtering(MF)technique to remove the noise that exists in the image.In addition,a multilevel thresholding based blood vessel segmentation process using seagull optimization(SGO)with Kapur’s entropy is performed.Moreover,the shark optimization algorithm(SOA)with Capsule Networks(CapsNet)model with softmax layer is employed for DR detection and classification.Awide range of simulations was performed on the MESSIDOR dataset and the results are investigated interms of different measures.The simulation results ensured the better performance of the proposed model compared to other existing techniques interms of sensitivity,specificity,receiver operating characteristic(ROC)curve,accuracy,and F-score.

Intelligent Machine Learning Enabled Retinal Blood Vessel Segmentation and Classification

Automated segmentation of blood vessels in retinal fundus images is essential for medical image analysis.The segmentation of retinal vessels is assumed to be essential to the progress of the decision support system for initial analysis and treatment of retinal disease.This article develops a new Grasshopper Optimization with Fuzzy Edge Detection based Retinal Blood Vessel Segmentation and Classification(GOFED-RBVSC)model.The proposed GOFED-RBVSC model initially employs contrast enhancement process.Besides,GOAFED approach is employed to detect the edges in the retinal fundus images in which the use of GOA adjusts the membership functions.The ORB(Oriented FAST and Rotated BRIEF)feature extractor is exploited to generate feature vectors.Finally,Improved Conditional Variational Auto Encoder(ICAVE)is utilized for retinal image classification,shows the novelty of the work.The performance validation of the GOFEDRBVSC model is tested using benchmark dataset,and the comparative study highlighted the betterment of the GOFED-RBVSC model over the recent approaches.

COMPUTATIONAL TECHNIQUE FOR FLOW IN BLOODVESSELS WITH POROUS EFFECTS

A finite element solution for the Navier-Stokes equations for steady flow under the porosity effects through a double branched two-dimensional section of a three-dimensional model of a canine aorta was obtained. The numerical solution involves transforming a physical coordinates to a curvilinear boundary fitted coordinate system.The steady flow,branch flow and shear stress under the porous effects were discussed in detail. The shear stress at the wall was calculated for Reynolds number of 1 000 with branch to main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and it has been observed that our results are very close to the exact solutions.This work is in fact an improvement of the work of Sharma et al. (2001) in the sense that computational technique is economic and (Reynolds) number is large.

Altered Calcium Handling in Peripheral Nerve Terminals and Blood Vessels in Spontaneously Hypertensive Rats

The present study was designed to clarify the roles of N-type and P/Q-type calcium channels in the increased sympathetic activity of spontaneously hypertensive rats (SHR/Izm). We also tested in SHR/Izm the contribution to increased vascular tone of α1A adrenoceptor-linked L-type calcium channels and α1B receptor-mediated calcium mobilization from the sarcoplasmic reticulum. Methods: Six-week-old SHR/Izm and Wistar-Kyoto rats (WKY/Izm) were used. A superior mesenteric arterial preparation was electrically stimulated before and after treatment with ω-conotoxin GVIa (N-type calcium channel blocker [CgTX]) and ω-agatoxinIVa (P/Q-type calcium channel blocker [AgaTX]). Pressor response to norepinephrine was measured before and after treatment with the α1A blocker WB-4101 and the α1B blocker chloroethyl clonidine (CEC). To determine the intracellular calcium store size, the effects of ryanodine on pressor response and caffeine-induced vascular contraction were also tested. Results: Norepinephrine overflow evoked by electrical stimulation was increased in SHR/Izm. CgTX but not AgaTX suppressed the increased NE overflow in SHR/Izm. WB-4101 suppressed the pressor response to norepinephrine in SHR/Izm but not WKY/Izm rats. CEC had no effects on pressor response to norepinephrine in both types of rats. Caffeine-induced contraction to a high potassium-induced maximal contraction ratio was reduced in SHR/Izm. The effect of ryanodine on pressor response was reduced in SHR/Izm. Conclusion: N-type calcium channels but not P/Q-type calcium channels play an important role in the increased sympathetic tone in SHR/ Izm. Although α1A adrenoceptor-linked L-type calcium channels contribute to the increased vascular tone, the intracellular calcium store size was reduced in SHR/Izm.

Differentiation of smooth muscle progenitor cells in peripheral blood and its application in tissue engineered blood vessels

Background： A major shortcoming in tissue engineered blood vessels （TEBVs） is the lack of healthy and easily attainable smooth muscle cells （SMCs）. Smooth muscle progenitor cells （SPCs）, especially from peripheral blood, may offer an alternative cell source for tissue engineering involving a less invasive harvesting technique. Methods： SPCs were isolated from 5-ml fresh rat peripheral blood by density-gradient centrifugation and cultured for 3 weeks in endothelial growth medium-2-MV （EGM-2-MV） medium containing platelet-derived growth factoroBB （PDGF BB）. Before seeded on the synthesized scaffold, SPC-derived smooth muscle outgrowth cell （SOC） phenotypes were assessed by immuno-fluorescent staining, Western blot analysis, and reverse transcription polymerase chain reaction （RT-PCR）. The cells were seeded onto the silk fibroin-modified poly（3-hydroxybutyrate-co-3-hydroxyhexanoate） （SF-PHBHHx） scaflblds by 6× 10^4 cells/cm^2 and cultured under the static condition for 3 weeks. The growth and proliferation of the seeded cells on the scaffold were analyzed by 3-（4,5-dimethylthiazol-2-yl）-diphenyltetrazolium bromide （MTT） assay, scanning electron microscope （SEM）, and 4,6-diamidino-2-phenylindole （DAPI） staining. Results： SOCs displayed specific ＂hill and valley＂ morphology, expressed the specific markers of the SMC lineage： smooth muscle （SM） a-actin, calponin and smooth muscle myosin heavy chain （SM MHC） at protein and messenger ribonucleic acid （mRNA） levels. RT-PCR results demonstrate that SOCs also expressed smooth muscle protein 22a （SM22a, a contractile protein, and extracellular matrix components elastin and matrix Gla protein （MGP）, as well as vascular endothelial growth factor （VEGF）. After seeded on the SF-PHBHHx scaffold, the cells showed excellent metabolic activity and proliferation. Conclusion： SPCs isolated from peripheral blood can be differentiated the SMCs in vitro and have an impressive growth potential in the biodegradable synthesized scaffold. Thus, SPCs may be a promising cell sointo urce for constructing TEBVs.

Three-dimensional structure of liver vessels and spatial distribution of hepatic immune cells

As the largest internal organ of the human body,the liver has an extremely complex vascularnetwork and multiple types of immune cells.It plays an important role in blood circulation,material metabolism,and immune response.Optical imaging is an effective tool for studying finevascular structure and immunocyte distribution of the liver.Here,we provide an overview of thestructure and composition of liver vessels,the threedimensional(3D)imaging of the liver,andthe spatial distribution and immune function of various cell components of the liver.Especially,we emphasize the 3D imaging methods for visualizing fine structure in the liver.Finally,wesummarize and prospect the development of 3D imaging of liver vesels and immune cells.

Bioprinting of Small-Diameter Blood Vessels

There has been an increasing demand for bioengineered blood vessels for utilization in both regenerative medicine and drug screening.However,the availability of a true bioengineered vascular graft remains limited.Three-dimensional(3D)bioprinting presents a potential approach for fabricating blood vessels or vascularized tissue constructs of various architectures and sizes for transplantation and regeneration.In this review,we summarize the basic biology of different blood vessels,as well as 3D bioprinting approaches and bioink designs that have been applied to fabricate vascular and vascularized tissue constructs,with a focus on small-diameter blood vessels.

Weavability of β-Hydroxybutyrate and β-Hydroxyvalerate Copolymers( PHBV ) /PLA Used in Artificial Blood Vessels

The β-hydroxybutyrate and β-hydroxyvalerate copolymers( PHBV) /polylactic acid( PLA) is a new biocompatible material,which is developed through bacterial fermentation in vivo systems.The PHBV / PLA material could be used to make continuous filaments.However,features of artificial blood vessels,especially small diameter vascular grafts made of PHVB / PLA materials are not known.This research are to evaluate and improve weavability of the PHBV / PLA material, and to explore feasibility of using it in artificial blood vessels.Preliminary results showed that weavability of PHBV / PLV was not good,but its weavability could be improved by using methods of weak chemical,such as sizing.In this research,scanning electron microscope( SEM) was adopted to evaluate weavability of PHBV / PLV after sizing and observe surfaces of yarns and fabrics.Also,in order to set proper parameters in heat settings,differential scanning calorimetry( DSC) was used to identify glass transition temperature.

Endothelial cells and blood vessels are major targets for COVID-19-induced tissue injury and spreading to various organs

The coronavirus disease 2019(COVID-19)infected so far over 250 million people and caused the death of over 5 million worldwide.Aging,diabetes,and cardiovascular diseases,conditions with preexisting impaired endothelial functions predispose to COVID-19.While respiratory epithelium is the main route of virus entry,the endothelial cells(ECs)lining pulmonary blood vessels are also an integral part of lung injury in COVID-19 patients.COVID-19 not only affects the lungs and respiratory system but also gastrointestinal(GI)tract,liver,pancreas,kidneys,heart,brain,and skin.Blood vessels are likely conduits for the virus dissemination to these distant organs.Importantly,ECs are also critical for vascular regeneration during injury/lesions healing and restoration of vascular network.The World Journal of Gastroenterology has published in last two years over 67 outstanding papers on COVID-19 infection with a focus on the GI tract,liver,pancreas,etc.,however,the role of the endothelial and vascular components as major targets for COVID-19-induced tissue injury,spreading to various organs,and injury healing have not been sufficiently emphasized.In the present article,we focus on these subjects and on current treatments including the most recent oral drugs molnupiravir and paxlovid that show a dramatic,significant efficacy in controlling severe COVID-19 infection.

APPLICATION OF DOPPLER OPTICAL COHERENCE TOMOGRAPHY IN RHEOLOGICAL STUDIES:BLOOD FLOW AND VESSELS MECHANICAL PROPERTIES EVALUATION

Doppler Optical Coherence Tomography(DOCT)is a noninvasive optical diagnostic technique,which is well suited for the quantitative mapping of microflow velocity profiles and the analysis of flow-vessel interactions.The noninvasive imaging and quantitative analysis of blood flow in the complex-structured vascular bed is required in many biomedical applications,including those where the determination of mechanical properties of vessels or the knowledge of the mechanic interactions between the flow and the housing medium plays a key role.The change of microvessel wall elasticity could be a potential indicator of cardiovascular disease at the very early stage,whilst monitoring the blood flow dynamics and associated temporal and spatial variations in vessel’s wall shear stress could help predicting the possible rupture of atherosclerotic plaques.The results of feasibility studies of application of DOCT for the evaluation of mechanical properties of elastic vessel model are presented.The technique has also been applied for imaging of sub-cranial rat blood flow in vivo.

Novel Method Employing Accelerated-Oscillated Wave Saline Solutions to Unblock Blood Vessels—Physics and Fluid Dynamics Perspectives and Simulations

This research assesses the speed of blood flow across blood vessels and more specifically the veins in terms of Reynold’s number (laminar flow vs. turbulence flow) and in terms of overall speed of the blood when being injected with high-speed saline particles. The authors propose a novel technique to generate accelerated-waved particles built from saline solution to enable the unblocking of partially-blocked healthy-walled veins, and to restore normal operations of these veins. The novel technique encompasses a pump that accelerates saline solutions into the blood stream of the vein and these oscillated waves break down the fats or deposits inside the veins in order to help the blood to flow freely without any obstruction. This research simulated the vein with blood stream using characteristics of the vein in terms of vein diameter, blood density, venous blood flow, and the viscosity of the blood at the normal body temperature. The speed of the overall blood flow after the injection of the accelerated saline droplet solution was determined as well as the depth of penetration of the accelerated particles in order to cleanse the inside of the vein. Results are promising in terms of not altering significantly the overall speed of the bloodstream and also in terms of efficacy of the length of the vein which is being cleaned using this accelerated particle method.