Agrobacterium _mediated Transformation of Rice with Help of Bombardment

Oryza sativa L. ssp. japonica cv. Zhonghua 8, which is recalcitrant to infection of Agrobacterium tumefaciens (Smith et Townsend) Conn strain EHA105 with ordinary binary vector pCambia 1301, was transformed through Agrobacterium-mediated transformation with help of bombardment. The transformation efficiency can be raised greatly. Single copy of gene insertion in the genome of transgenic rice plants was proved by Southern analysis and the expression of GUS gene was observed. GUS gene and hygromycin-resistant gene show 3:1 segregation in progenies of the transgenic rice plants.

Studies on Genetic Transformation of NPR1 Gene into Maize by Microprojectile Bombardment

[Objective] This study aimed to explore the conditions of transformation of maize by microprojectile bombardment. [Method] Immature embryo-derived callus of maize inbred line 7239 was used as explants to study the effects of shoot distance, helium pressure, vacuum and bombardment frequency on the transformation efficien- cy in the particle bombardment system of maize. [Result] Considering the transfor- mation efficiency, particle bombardment with 100 μg/P of golden particles, at a shoot distance of 9 cm from the target cells, under helium pressure of 1 350 psi and vac- uum 25 inHg, and bombarding twice could achieve relatively ideal results. After se- lection on media supplemented with different concentration of hygromycin, some re- generated plants were obtained. The results of PCR and Southern blotting analysis demonstrated that the NPR1 gene had been integrated into the genome of trans- genic maize plants, with an average transformation efficiency of 1.76%. [Conclusion] The study laid the foundation for the cultivation and breeding of excellent resistant varieties of maize.

Effects of supersonic fine particles bombarding on thermal barrier coatings after isothermal oxidation

This work was attempted to modify the current technology for thermal barrier coatings（TBCs） by adding an additional step of surface modification,namely,supersonic fine particles bombarding（SFPB） process,on bond coat before applying the topcoat.After isothermal oxidation at 1000 °C for different time,the surface state of the bond coat and its phase transformation were investigated using X-ray diffraction（XRD）,scanning electron microscopy（SEM） equipped with energy-dispersive X-ray spectrometry（EDS）,transmission electron microscopy（TEM） and Cr3＋ luminescence spectroscopy.The dislocation density significantly increases after SFPB process,which can generate a large number of diffusion channels in the area of the surface of the bond coat.At the initial stage of isothermal oxidation,the diffusion velocity of Al in the bond coat significantly increases,leading to the formation of a layer of stable α-Al2O3 phase.A great number of Cr3＋ positive ions can diffuse via diffusion channels during the transient state of isothermal oxidation,which can lead to the presence of（Al0.9Cr0.1）2O3 phase and accelerate the γ→θ→α phase transformation.Cr3＋ luminescence spectroscopy measurement shows that the residual stress increases at the initial stage of isothermal oxidation and then decreases.The residual stress after isothermal oxidation for 310 h reduces to 0.63 GPa compared with 0.93 GPa after isothermal oxidation for 26 h.In order to prolong the lifespan of TBCs,a layer of continuous,dense and pure α-Al2O3 with high oxidation resistance at the interface between topcoat and bond coat can be obtained due to additional SFPB process.

Degradation of the Emission Current from the Field Emitter Caused by Ion Bombardment

In field emission devices, the emission current sometimes degrades with the time. The mechanism of the current degradation is complicated. In this paper, a program is used to simulate the movement of the electron beam from a field emitter. According to the current distribution and the trajectories of the primary electron beam, it is shown that the residual gas is ionized and the ion pairs are generated. The trajectories of the positive ions are simulated. With the different locations and kinetic energy of i...

Hereditary Behavior of bar Gene Cassette is Complex in Rice Mediated by Particle Bombardment

Particle bombardment transformation using minimal gene cassette （containing the promoter, open reading frame and terminator） is the novel trend in plant genetic transformation, and its use helps to alleviate the undesirable effects of plasmid vector backbone sequences on transgenic plants. In the present article, studies related to the hereditary behavior of bar gene cassette in T1 to T3 generations of the transgenic rice （Oryza sativa L.） lines transformed by particle bombardment have been discussed. The selectable marker bar gene cassette that integrated with the rice genome had multiple copies and showed complex segregation behaviors including the presence of ‘false homozygotes’, with abnormal segregation ratios ranging from 35：1 to 144：1 （Basta-resistant： sensitive plants） in their progenies. In five out of ten original transgenic lines, bar gene can be stably transmitted as a dominant gene to self-pollinated T2 progeny. The homozygotes were obtained in three transgenic lines in T1 generation regardless of the multiple-copy integration patterns of bar gene. Southern blotting analysis showed that multiple copies of bar gene cassette were linked, which formed transgene arrays in the host rice genome. The authors also observed stable transmission of integration patterns of bar gene cassette, as obtained from Southern blotting analysis, in the regularly segregated transgenic rice lines and loss of gene in an irregularly segregated transgenic line. The segregation behavior varied among the transgenic progenies that exhibited similar Southern hybridization patterns of bar gene. On the basis of these results, the multiple-copy integration, gene lost, and gene expres- sion interaction were the major reasons for the complex segregation behaviors of bar gene cassette in transgenic rice plants.

Initiation of plate tectonics in the Hadean: Eclogitization triggered by the ABEL Bombardment

When plate tectonics began on the Earth has been long debated and here we argue this topic based on the records of Earth-Moon geology and asteroid belt to conclude that the onset of plate tectonics was during the middle Hadean（4.37-4.20 Ga）. The trigger of the initiation of plate tectonics is the ABEL Bombardment, which delivered oceanic and atmospheric components on a completely dry reductive Earth, originally comprised of enstatite chondrite-like materials. Through the accretion of volatiles, shock metamorphism processed with vaporization of both CI chondrite and supracrustal rocks at the bombarded location, and significant recrystallization went through under wet conditions, caused considerable eclogitization in the primordial continents composed of felsic upper crust of 21 km thick anorthosite, and 50 km or even thicker KREEP lower crust. Eclogitization must have yielded a powerful slab-pull force to initiate plate tectonics in the middle Hadean. Another important factor is the size of the bombardment. By creating Pacific Ocean class crater by 1000 km across impactor, rigid plate operating stagnant lid tectonics since the early Hadean was severely destroyed, and oceanic lithosphere was generated to have bi-modal lithosphere on the Earth to enable the operation of plate tectonics.Considering the importance of the ABEL Bombardment event which initiated plate tectonics including the appearance of ocean and atmosphere, we propose that the Hadean Eon can be subdivided into three periods：（1） early Hadean（4.57-4.37 Ga）,（2） middle Hadean（4.37-4.20 Ga）, and（3） late Hadean（4.20-4.00 Ga）.

Transformation of TrxS Gene into Barley by Particle Bombardment

The production of malting barley in China can＇t meet the demand of beer industries because of poor quality and it becomes a bottleneck problem in beer manufacture industry. In this paper, TrxS gene cloned from Phalaris coerulescens was transferred into barley cultivar Yupi 1 （YP1） via biolistic bombardment. 1206 immature embryos were bombarded and seven transgenic plants carrying TrxS gene were confirmed by PCR and PCR-Southern blotting analysis. TrxS gene was expressed in transgenic plants by RT-PCR analysis. The activity of Trxh and α-amylase of transgenic line were higher than that of non-transgenic line, which is helpful to improve malting quality of barley.

Sputtering of W Mo alloy under ion bombardment

The distribution of plasma density in the vicinity of the W Mo alloy source in the process of double glow discharge plasma surface alloying was diagnosed using the moveable Langmuir probe. The sputtering law, surface composition and morphological variation of the W Mo alloy source was studied. The experimental results show that there exists obvious preferential sputtering on the surface of the W Mo alloy source under the argon ion bombardment; the stable period is reached after a transitional period, and the preferential sputtering occurs in a definite range of composition(mole fraction): 70%～75% Mo, 22%～25% W; there appears segregation on the surface of the W Mo alloy source.

Transfer and Detection of barstar Gene to Maize Inbred Line 18-599 (White) by Particle Bombardment

In China, the purity of maize hybrid strain is discomforting to the development of seed industrialization. Finding a new method for reproduction of maize hybrid strain is necessary. In this study, using particle bombardment, barstar gene was transferred into maize inbred line 18-599 （White）, which is an antiviral and high quality maize inbred line. By molecular detection of the anther of transgenic maize, two plants transferred with barstar gene were gained in this study, which are two restorer lines. The two plants showed normal male spike, and lively microspores. But the capacity of the two restorer lines should be studied in the future. The aim of this study is to find a new method of reproduction of maize hybrid strain using engineering restorer lines and engineering sterility lines by gene engineering technology.

Effect of Supersonic Fine Particles Bombarding on the Service Life of Thermal Barrier Coating

Thermally Grown Oxide（TGO） is a dominating component in controlling the effectiveness of thermal barrier coating.During the growth of TGO,whether we could homogeneously distribute Al atom on the TGO and the intermediate metal layer will be the key factor in forming TGO with continuous,uniform and single-ingredient（Al2O3）.In this experiment,we bombarded particles on to the metallic bound layer.We studied the influence of supersonic particle bombardment on the diffusion of Al.We hope to control the growth of TGO by monitoring the diffusion of Al.Thermal barrier coating（TBC）,which consists of a NiCoCrAlY bond coat and a ZrO2-8Y2O3（wt.%） topcoat（TC）,is fabricated on the nickel-base superalloy by air plasma spray（APS）.NiCoCrAlY bond coat is treated by supersonic fine particles bombarding（SFPB）.The morphology,oxidation behavior of TBC and phase are characterized by scanning electron microscope（SEM） equipped with an energy dispersive spectromrter（EDS） and X-ray diffractometer（XRD）.The influence of supersonic fine particles bombarding technique on the service life of thermal barrier coating is studied.The results show that SFPB technique improves the flaw of excessive surface undulation in the as-sprayed bond coat.A continuous,uniform and single-ingredient（Al2O3） TGO can quickly form in the SFPB TBC during high temperature oxidation process.The thickening of TGO is relatively slow.These will effectively suppress the formation of other non-protective oxides.Therefore,SFPB technique reduces the growth stress level generated by the continuous growth of TGO,and also avoids the stress concentration induced by formation of the large particle spinal oxide.Thermal barrier coating still remains well after 350 thermal cycles.The service life of TBC is improved.The proposed research provides theoretical basis and technical references to further improve and enhance the SFPB technique.

Computer simulation of the bombardment of a copper film on graphene with argon clusters

The process of graphene cleaning of a copper film by bombarding it with Ar_（13） clusters is investigated by the molecular dynamics method.The kinetic energies of the clusters are 5,10,20,and 30 eV and the incident angles are θ= 90°,75°,60°,45°,and 0°.It is obtained that the cluster energy should be in the interval 20 eV-30 eV for effective graphene cleaning.There is no cleaning effect at vertical incidence（θ =0°） of Ar_（13） clusters.The bombardments at 45° and 90° incident angles are the most effective on a moderate and large amount of deposited copper,respectively.

Effects of supersonic fine particle bombarding on thermal cyclic failure lifetime of thermal barrier coating

Thermal barrier coating ( TBC) consisting of a NiCoCrAlY bond coat ( BC) and a ZrO2-8 wt. % Y2O3 topcoat ( TC) was fabricated on the nickel-base superalloy by air plasma spray ( APS) . The BC was treated by supersonic fine particle bombarding ( SFPB) . Thermal cyclic failure and residual stress in thermally grown oxide ( TGO) scale were studied by SEM with EDS and ruby fluorescence spectroscopy ( RFS) . As shown in the results,after treated by SFPB,thickening of TGO was relatively slow,which reduced the level of growth stress. The TBC with SFPB treatment was still remained well undergoing 350 times of thermal cycle. However,after thermal cycle with the same times,the separation of TC was observed in TBC without SFPB treatment. The residual stress analysis by RFS showed that the residual stress of SFPB-treated TBC increased with the increasing number of thermal cycle. The residual stress of conventional TBC reached a value of 650 MPa at 350 times of cycle and that of SFPB-treated TBC only reached 532 MPa at 400 times of cycle. The BC with SFPB treatment after 400 times of cycle was analyzed by RFS,the high stress value was not observed in local thickened region of TGO. Thermal cycling resistance of TBC can be improved by the SFPB technology.

Genetic transformation of Platymonas (Tetraselmis) subcordiformis (Prasinophyceae, Chlorophyta) using particle bombardment and glass-bead agitation

Platymonas (Tetraselmis) subcordiformis is a unicellular marine green alga. It was found to be very sensitive to the herbicide Basta through a sensitivity test indicating it could be employed as a selective agent. The bar gene is a practicable and selectable marker gene. The vector containing the expression cassette of the bar gene was transferred to P. subcordiformis by both particle bombardment and glass-bead agitation and transformants were then selected using Basta. Finally, Southern blotting analysis indicated that the bar gene had been successfully integrated into the nuclear genome of P. subcordiformis using both of the transgenic techniques, with the transformation efficiency of the glass-bead method being slightly higher than that of particle bombardment. This is the first report on stable transformation of P. subcordiformis, and will improve fundamental research and enlarge application of this alga.

Conifer genetic engineering: Particle bombardment and Agrobacterium-mediated gene transfer and its application in future forests

Many important advances in forest biotechnology have been made. The use of genetic transformation and the ap-plications of transgenic trees in modern forestry is now an important field. Two basic methodologies particle bombardment and Agrobacterium-mediated transformation have been used on conifers. However, routine procedures exist for only a limited number of conifers. As a result only a few species have been successfully transformed into stable transgenic plants. The use of a particle bombardment has been more successful and transgenic plants have been produced in Picea abies, Picea glauca, Picea mariana, and Pinus radiata, although the level of production of stable transgenic plants is lower than that of Agrobacte-rium. At present, breeding programs have been directed toward improving bole shape, growth rate, wood properties, and quality, as well as toward improving root and shoot performance, pest resistance, stress tolerance, herbicide resistance, and ability to resist stresses, which will drive forestry to enter a new era of productivity and quality. This article provides a brief overview of the current state of knowledge on genetic transformation in conifers.

Theoretical expressions for soil particle detachment rate due to saltation bombardment in wind erosion

Saltation bombardment is a dominate dust emission mechanism in wind erosion.For loose surfaces,splash entrainment has been well understood theoretically.However,the mass loss predictions of cohesive soils are generally empirical in most wind erosion models.In this study,the soil particle detachment of a bare,smooth,dry,and uncrusted soil surface caused by saltation bombardment is modeled by means of classical mechanics.It is shown that detachment rate can be analytically expressed in terms of the kinetic energy or mass flux of saltating grains and several common mechanical parameters of soils,including Poisson's ratio,Young's modulus,cohesion and friction angle.The novel expressions can describe dust emission rate from cohesive surfaces and are helpful to quantify the anti-erodibility of soil.It is proposed that the mechanical properties of soils should be appropriately included in physically-based wind erosion models.

Formation of the [M+NH_4]^+ Ious of Some Mouo-and Di-saccharides in Fast Atom Bombardment Mass Spectrometry

In positive-ion fast atom bombardment (FAB) mass spectrometry, when mono- and di- saccharides are mixed with an appropriate amount of NH4Cl, a highly abundan peak [M+NH4]+appers in FAB mass spectra . From the adduct ion [M+NH4]+, the molecular weights of mono- and di- saccharides can be determined definitively

Studies of Improving the Frequency of Indica Rice Transformation by Biolistic Bombardment

In order to improve the frequency of indica rice transformation by biolistic bombardment, suitable culture conditions for embryonic calli,an optimal selection scheme for resistant calli and seedlings, and optimum bombardment parameters a investigated by using 14 commercially important indica rice cultivars. The main results show that the CC medium with 36g/L mannitol is a scheme subculture medium in which the browning of indica rice calli can be mitigated significantly; The concentration of 30～40mg/L Hyg or 150～200mg/L G418 or 10～20 mg/L Basta is suitable for selection of resistant calli; The transformation parameters of 100μg gold powder absorbing 0.2μg DNA per shot and 900 psi helium pressure and 6 cm bombardment distance and bombarded twice for each plate give the best result; Keeping the target calli on osmotic medium containing 60g/L mannitol from 12 ～24h before bombardment to 24～48h after it can increase the efficiencies of transformation . Furthermore, some transgenic indica rice plants are obtained using this optimized transformation system.

Ions Bombardment in Thin Films and Surface Processing

Ions bombardment is very important in thin films and surface processing. The ion energy and ion flux are two important parameters in ion bombardment. The ion current density mainly dependent on the plasma density gives the number of energetic ions bombarding the substrate. The self-bias voltage in plasma sheath accelerates plasma ions towards the substrate. RF discharge can increase plasma density and RF bias can also provide the insulator substrate with a plasma sheath. In order to choose and control ion energy, ion density, the angle of incidence, and ion species, ion beam sources are used. New types of electrodeless ion sources (RF, MW, ECR-MW) have been introduced in detail. In the last, the effects of ion bombardment on thin films and surface processing are presented.

MICROSTRUCTURE OF Ti－B－NFILM AND INTERFACEFORMED BY N ION BOMBARDMENTON A Ti－B FILM

Ti-B-N film was deposited on W18Cr4 V high speed steels by using N ion bombardment on an EB-ion plating Ti-B film. It was found that Ti, B and N in the film are homogeneous, but there exists an extended diffusion zone at the film / substrate interface on the basis of the results of IPMA, EPMA and TEM. The boron content of the film is 9.5 at.%, as given by nuclear reaction analysis. The ratio of nitrogen to titanium of the film is about 0.94, as given by EPMA. The width of a high N concentration region in the Ti-B-N film fowned by N ion bombardment of a Ti-B film is about 100 nm; N and Ti penetrates into the substrate, resulting in a wide interfacial diffusion zone. The width of the diffusion zone obtained with TEM and EDAX is about 20 nm. μ-diffraction patterns of the interface show that FeTi, Fe_2 Ti, and Ti_2N existin the interfacial diffusion zone. TEM observation of film and interface show a dense and fine nano-crystalline structure of the film and a dense close interfactal bonding of the film to substrate. Electron diffraction patterns and the values of electrun binding energy by XPS show that the film consists mainly of fcc TiN, with dispersed simple orthorhombic TiB, cubic BN and simple hexagonal Ti-B-N phases. The results show that the N ion hombardment extends the film / substrate interfacial diffusion zone and stimulates chemical reaction both in the film and interface.

Monte Carlo simulation of lattice analysis of complex LaCeTh0.1CuOy using ion bombardment technique

Ion bombardment analysis of perovskite materials is challenging owing to their peculiar structure.This shortcoming renders the reliability on the technique somewhat questionable.In this research,three structured modifications(i.e.,scan angle,low energy,and large ion bombardment)were adopted to improve the ion bombardment analysis of 99,999 ions using Monte Carlo simulations.The modified technique was used to analyze the effects of a chemically pressurized‘‘A’’site in the perovskite lattice system.The LaCeTh0.1Cu2Oy compound was used in this experiment.Despite the low probing energy,it was observed that the high number of ions bombarding the material resulted in external pressure on the lattice structure of the material.Moreover,the chemically pressurized‘‘A’’site perovskite material was characterized by lattice mismatch,lattice fluctuations,grain boundary collapse,and oxygen displacement.The novel discovery of this research is the inter-and intra-extended lattice mismatches that are likely to connect.Hence,further investigation of the connection between inter-and intraextended lattice mismatches is recommended as they may enable fabrication of room-temperature superconductors.