Design scheme for fast charging station for electric vehicles with distributed photovoltaic power generation

The demand for fast charging is increasing owing to the rapid expansion of the market for electric vehicles. In addition, the power generation technology for distributed photovoltaic has matured. This paper presents a design scheme for a fast charging station for electric vehicles equipped with distributed photovoltaic power generation system taking the area with certain conditions in Beijing as an example construction site. The technical indexes and equipment lectotype covering the general framework and subsystems of the charging station are determined by analyzing the charging service demand of fast charging stations. In this study, the layout of the station is developed and the operation benefits of the station is analyzed. The design scheme realizes the design objective of "rationalization, modularization and intelligentization" of the fast charging station and can be used as reference for the construction of a fast charging network in urban area.

RHOMBUS THINKING METHOD AND ITS APPLICATION IN SCHEME DESIGN

Rhombus thinking, a new creative thinking method,is the combination of divergent thinking process and convergent thinking process,in which qualitative analysis is carried out before quantitative analysis This method tries to solve the bottle neck problem in intelligent CAD based on the extension theory The rhombus thinking method to the scheme design of new products is applied In this process, firstly, the matter element expression for the know information are set up, and then a set of matter elements are opened up by matter elements extension method; Finally,the useful information are got by appraisal method of dependent degree It has been successfully applied to the scheme design for the cutter store of machining center Theoretical and experimental results demonstrated fhat the method is much more accurate,objective and efficient than the traditional one

Self-organized evolution of mechanism kinetic scheme based on axiomatic design

The self-organized evolution technology of the mechanism kinetic scheme based on axiomatic design is presented. This technology tries to express the constraints between kinetic mechanisms briefly in a semantic form which is more familiar to the designers. Through the mapping process between the kinetic chain unit and the unit instance, the evolution from abstract unit to concrete engineering instance is achieved. The subdivision of unit coupling semantics is studied, and the evolution of semantics is finished. Also, the semantic constraints evolution of unit coupling semantics is described. The product structure models with function and assembly meanings are constructed based on the kinematic chain unit and unit coupling. It provides a basis to realize the inheritance and transfer of constraint information from conceptual design to design for assembly （DFA）. As the engineering practice result shows, the method can help the engineers express their And the automation, recursion and design intension more clearly and naturally in a high semantic level. visualization of the mechanism kinetic scheme design are realized

A New D-optimal Design Scheme for the Identification of Cubic Polynomials

In this paper, the limitations of the single cube D-optimal design scheme is studied, and a double cube D-optimal design scheme is suggested in order to overcome the limitations. For a sort of incomplete cubic polynomials, the test design of the identification is developed with this new scheme, and the comparation with the single cube scheme is also given. This scheme is shown to be perfectly suitable for the optimal identification of the complete cubic polynomials.

Design strategy of intelligent CAD for welding positioner scheme design

Traditional CAD technique does not support the design processes such as function definition, conceptual design and preliminary design, which are most creative and play significant roles on the design quality. Because scheme design has close relationship with product structure, performance and technology cost, it is important for applying the intelligent CAD of scheme design to improve the quality and competitive level of the product. The definition and function of welding positioner are discussed in this paper. The new definition of welding positioner extends the research scope of welding positioner to welding fixture and welding positioning motion mechanism. The design process of welding fixture and positioning motion system is described, and the cased based and knowledge based design strategy of welding positioner scheme design intelligent CAD is then put forward, which lays foundation for developing proto type system of welding positioner scheme design.

Optimal Selection Model of Equipment Design Scheme Based on Set Pair Analysis

Selecting the optimal one from similar schemes is a paramount work in equipment design.In consideration of similarity of schemes and repetition of characteristic indices,the theory of set pair analysis(SPA)is proposed,and then an optimal selection model is established.In order to improve the accuracy and flexibility,the model is modified by the contribution degree.At last,this model has been validated by an example,and the result demonstrates the method is feasible and valuable for practical usage.

Design Scheme of Electric Lifting Workbench for Maintenance of Aerometer in Observation Field

The wind speed and wind direction meter of meteorological station is installed on the wind meter pole 10 meters high from the observation site, which also causes some difficulties for the maintenance of the wind speed and wind direction meter in the later period. Based on this situation, an electric lifting worktable (referred to as the electric lifting worktable) is specially designed for the maintenance of wind meters in meteorological observation sites. It can lift the maintenance personnel and equipment and tools to a height convenient for work, and then grasp the wind meter pole through the mechanical arm. It can be operated by a single person, thus getting rid of the traditional dimension by climbing the wind meter pole or releasing the wind meter pole. The present situation of repairing has the characteristics of saving manpower and easy operation, which is conducive to improving work efficiency and reducing work intensity. It also greatly guarantees the safety of maintenance personnel, and has good practicability and extensive popularization value.

Secret Sharing Schemes Based on the Dual Code of the Code of a Symmetric （v, k, λ）-Design and Minimal Access Sets

Secret sharing has been a subject of study for over 30 years. The coding theory has been an important role in the constructing of the secret sharing schemes. It is known that every linear code can be used to construct the secret sharing schemes. Since the code of a symmetric （V, k, λ）-design is a linear code, this study is about the secret sharing schemes based on C of Fp-code C of asymmetric （v, k, λ）-design.

Tight Relative 6-designs on Binary Hamming Association Schemes

The concept of relative t-designs for Q-polynomial association schemes is due to Delsarte(Philips Res Rep 32: 373C411, 1997). In this paper, we discuss the Fisher type lower bounds of tight relative 6-designs very explicitly for binary Hamming association schemes H(n, 2).

An Approach to Representation for Principle Scheme Design

One of the open issues in principle scheme design of mechanical systems is principle representation, which not only outlines the physical principles, but also facilitates the design synthesis. An energy-based approach to represent principle scheme design is proposed. Firstly, an energy interaction model of mechanical systems is established and an intermediate model is derived, in which principle scheme design is transformed into solving the energy functions of system. Then the energy functions are modeled with the language of bond graphs, and principle representation for components is presented. Finally, characteristics of the developed representation approach are analyzed and a design example of gate drive system is given to demonstrate this approach.

Design and Analysis of Test Schemes of Static Postponing Time on Shrapnels Used to Riot Control

The test scheme of static postponing time given in our actual national military test standard on shrapnels used to control riot is a nine-point test scheme on the combined action of three kinds of temperatures and three kinds of pressures, the consumed ammunitions are more excessive. Statistic analysis and tentative checkout about a lot of test data are done, feasibility gists are put forward for optimizing of the test design scheme. The optimizing design and data analysis of test scheme of the item are done by managing uniformity design theory, two scientific and reasonable six-point test schemes are confirmed. The feasibility and reliability of the optimizing design schemes put forward above are proved ulteriorly by test validating. The gained schemes not only have good design uniformity and little ammunition wastage and meet the test demand, but also have better forecast ability for the result data of other points using the mathematic models from the actual test points.

Aerodynamic/stealth design of S-duct inlet based on discrete adjoint method

It is a major challenge for the airframe-inlet design of modern combat aircrafts,as the flow and electromagnetic wave propagation in the inlet of stealth aircraft are very complex.In this study,an aerodynamic/stealth optimization design method for an S-duct inlet is proposed.The upwind scheme is introduced to the aerodynamic adjoint equation to resolve the shock wave and flow separation.The multilevel fast multipole algorithm(MLFMA)is utilized for the stealth adjoint equation.A dorsal S-duct inlet of flying wing layout is optimized to improve the aerodynamic and stealth characteristics.Both the aerodynamic and stealth characteristics of the inlet are effectively improved.Finally,the optimization results are analyzed,and it shows that the main contradiction between aerodynamic characteristics and stealth characteristics is the centerline and crosssectional area.The S-duct is smoothed,and the cross-sectional area is increased to improve the aerodynamic characteristics,while it is completely opposite for the stealth design.The radar cross section(RCS)is reduced by phase cancelation for low frequency conditions.The method is suitable for the aerodynamic/stealth design of the aircraft airframe-inlet system.

Victory Ceremony Hosts/Hostess Costume Design Scheme for Beijing Olympics Sought

The Beijing Organizing Committee for the Games of the 29th Olympiad(BOCOG)announced on May 22 that it is organizing a bid across the nation for the design scheme of the victory ceremony hosts/hostess costumes for the Beijing 2008 Olympic Games from May 23 to June 25,2007.

基于NAPA Designer的钻台结构参数化设计

钻台作为钻井船或钻井平台中钻井模块的载体,既要满足作业功能的需求,又受到主船体尺度和重量控制等因素的制约,故在初步设计阶段需快速制定不同设计方案供比较选择。在此背景下,该文基于NAPA Designer软件提供的二次开发功能,编写了钻台结构参数化设计模块,通过用户自定义界面数据交互驱动钻台参数化模型的创建和更新,可实现快速提供多种设计方案进行比选,并导出三维有限元模型用于结构强度的分析校核,从而得到钻台结构的优化设计方案。经过实船项目测试表明,基于NAPA Designer软件的钻台结构参数化设计方法可有效降低使用者门槛并显著提高设计效率。

A New Integrated Design Method Based on Fuzzy Matter-Element Optimization

This paper puts forward a new integrated design met ho d based on fuzzy matter-element optimization.On the based of analyzing the mod el of multi-objective fuzzy matter-element , the paper defines the m atter-element weightily and changes solving multi-objective fuzzy optimization into solving dependent function K(x) of the single-objective optimization according to the optimization criterion. The paper particularly describes the realization approach of GA process of multi -objective fuzzy matter-element optimization: encode, produce initial populati on, confirm fitness function, select operator, etc. In the process, the adaptive macro genetic algorithms (AMGA) is applied to enhancing the evolution speed. Th e paper improves the two genetic operators: crossover and mutation operator. The modified adaptive macro genetic algorithms (MAMGA) is put forward simultane ously. It is adopted to solve the optimization problem. Three optimization methods, namely fuzzy matter-element optimization method, li nearity weighted method and fuzzy optimization method, are compared by using the table and figure, it shows that not only MAMGA is a little better than the AMGA , but also it reaches the extent to which the effective iteration generation is 62.2% of simple genetic algorithms (SGA). By the calculation of optimum exam ple, the improved method of genetic in the paper is much better than the method in reference of paper.

SEMANTIC NETWORK PRESENTATION OF MECHANICAL MOTION SCHEME AND ITS MECHANISM TYPES SELECTION METHOD

The presentation method of the mechanical motion scheme must support thewhole process of conceptual design. To meet the requirement, a semantic network method is selectedto represent process level, action level, mechanism level and relationships among them. Computeraided motion cycle chart exploration can be realized by the representation and revision of timecoordination of mechanism actions and their effect on the design scheme. The uncertain reasoningtechnology based on semantic network is applied in the mechanism types selection of the needledriving mechanism of industrial sewing mechanism, and the application indicated it is correct,useful and advance.

Considering for the blanket structure scheme of HCCB DEMO

For the solid blanket concept of helium cooled ceramic breeder (HCCB) demonstration fusion power plant (DEMO), a feasible blanket structure with configuration 2×X is proposed as considering relatively low temperature limit of neutron multiplier beryllium pebbles. Based on that, preliminary design for the typical blanket module of HCCB DEMO has been carried out and verified by thermal-hydraulic analysis and structural analysis. Furthermore, the specific relationship of maximum temperature depended on the surface heating of blanket key part first wall (FW) is also analyzed.

Interleaved-Connected Split Planar Resonant Inductor Design in 1 kV SiC LLC Converters

Design method of split planar resonant inductor in 1 kV SiC logical link control(LLC)converter is proposed,which ensures the converter power density of 93.59 W/in^3 and peak efficiency of 95.73%.Split resonant inductor helps to provide symmetrical resonant current by symmetrical impedance,and improves the distortion of resonant current,which ensures the efficiency of the whole converter.An interleaved winding connecting scheme improves the power density of the planar magnets,which contributes to power density improvement.Design method and calculation process of such split planar resonant inductor are provided.To verify the feasibility of the proposed design method,a 1 kV/48 V 6.6 kW,210 k Hz SiC LLC prototype was built,and the experimental results are given.

Design of Ningdu Talent Apartment Design in Jiangxi

Taking the design of Ningdu Talent Apartment for example,active eco-design at the origin of design—design of building scheme was elaborated,including overall layout,planar design,eco-interface design,building environment and outer space design,sun-shading design.Implementation of ecological and energysaving concepts in building scheme was reviewed.

Design Method for the Power Shifting Transmission of Parallel Hybrid Electric Vehicle

A novel method of scheme design is proposed for power shifting transmissions of parallel hybrid electric vehicles(HEVs).First,shift sequences considering the path of power flow and shift logics are analyzed based on the graph theory model,abstracted from the degree-of-freedom(DOF)of the schemes.Second,the scheme of gear-pair and shaft,defined as the scheme that ignores the arrangement of synchronizers,is derived from the basic configuration,defined as the scheme of gear-pair and shaft that contains only one of each type of the variable connections,and the numbers of each type of the variable connections.Finally,a multi-parameter scheme,including the arrangement of synchronizers and gear ratios,is designed to optimize the results of synthesis.This method helps to gain a deeper understanding of the systematic design of other fixed gear transmission schemes,such as automated mechanical transmission,dual clutch transmission,and even some novel multi-input transmission.