This paper discusses the analysis and design of a very thin slotless permanent magnet （PM） brushless motor whose stator laminations are manufactured from a single strip of steel that is edge wound into a spiral （li...This paper discusses the analysis and design of a very thin slotless permanent magnet （PM） brushless motor whose stator laminations are manufactured from a single strip of steel that is edge wound into a spiral （like a ＂Slinky＂） and then fitted over the windings that are preformed on the outside surface of a non-conducting former. Analytical and finite element analysis （FEA） are used to determine the con- strained optimum dimensions of a motor used to drive a rim driven thruster in which the motor rotor is fit- ted onto the rim of the propeller and the stator is encapsulated in the thin Kort nozzle of the thruster. The paper describes the fabrication of a demonstrator motor and presents experimental results to validate the theoretical calculations. Experimental motor performance results are also reported and compared with those of a slotted motor that fits within the same active radial dimensions as the slotless motor. The slotless motor, which has longer active length and endwindings, and thicker magnets than the slotted motor, was found to be less efficient and more expensive （prototype cost） than the slotted machine.展开更多
It is a challenge to realise an EKF-based sensorless controller for an Interior Permanent Magnet （IPM） brushless ac motor drive due to the influence of nomlinearities and rotor saliency. An improved reduced-order EK...It is a challenge to realise an EKF-based sensorless controller for an Interior Permanent Magnet （IPM） brushless ac motor drive due to the influence of nomlinearities and rotor saliency. An improved reduced-order EKF method is presented, reducing the rotor position estimation error of an IPM motor, as evident in [1] due to the neglect of saliency. The effectiveness of the proposed method is verified experimentally.展开更多
文摘This paper discusses the analysis and design of a very thin slotless permanent magnet （PM） brushless motor whose stator laminations are manufactured from a single strip of steel that is edge wound into a spiral （like a ＂Slinky＂） and then fitted over the windings that are preformed on the outside surface of a non-conducting former. Analytical and finite element analysis （FEA） are used to determine the con- strained optimum dimensions of a motor used to drive a rim driven thruster in which the motor rotor is fit- ted onto the rim of the propeller and the stator is encapsulated in the thin Kort nozzle of the thruster. The paper describes the fabrication of a demonstrator motor and presents experimental results to validate the theoretical calculations. Experimental motor performance results are also reported and compared with those of a slotted motor that fits within the same active radial dimensions as the slotless motor. The slotless motor, which has longer active length and endwindings, and thicker magnets than the slotted motor, was found to be less efficient and more expensive （prototype cost） than the slotted machine.
文摘It is a challenge to realise an EKF-based sensorless controller for an Interior Permanent Magnet （IPM） brushless ac motor drive due to the influence of nomlinearities and rotor saliency. An improved reduced-order EKF method is presented, reducing the rotor position estimation error of an IPM motor, as evident in [1] due to the neglect of saliency. The effectiveness of the proposed method is verified experimentally.
