OptoGPT: A foundation model for inverse design in optical multilayer thin film structures

Optical multilayer thin film structures have been widely used in numerous photonic applications.However,existing inverse design methods have many drawbacks because they either fail to quickly adapt to different design targets,or are difficult to suit for different types of structures,e.g.,designing for different materials at each layer.These methods also cannot accommodate versatile design situations under different angles and polarizations.In addition,how to benefit practical fabrications and manufacturing has not been extensively considered yet.In this work,we introduce OptoGPT(Opto Generative Pretrained Transformer),a decoder-only transformer,to solve all these drawbacks and issues simultaneously.

Seabed structures and foundations related to deep-sea resource development:A review based on design and research

The deep‐sea ground contains a huge amount of energy and mineral resources,for example,oil,gas,and minerals.Various infrastructures such as floating structures,seabed structures,and foundations have been developed to exploit these resources.The seabed structures and foundations can be mainly classified into three types:subsea production structures,offshore pipelines,and anchors.This study reviewed the development,installation,and operation of these infrastructures,including their structures,design,installation,marine environment loads,and applications.On this basis,the research gaps and further research directions were explored through this literature review.First,different floating structures were briefly analyzed and reviewed to introduce the design requirements of the seabed structures and foundations.Second,the subsea production structures,including subsea manifolds and their foundations,were reviewed and discussed.Third,the basic characteristics and design methods of deep‐sea pipelines,including subsea pipelines and risers,were analyzed and reviewed.Finally,the installation and bearing capacity of deep‐sea subsea anchors and seabed trench influence on the anchor were reviewed.Through the review,it was found that marine environment conditions are the key inputs for any offshore structure design.The fabrication,installation,and operation of infrastructures should carefully consider the marine loads and geological conditions.Different structures have their own mechanical problems.The fatigue and stability of pipelines mainly depend on the soil‐structure interaction.Anchor selection should consider soil types and possible trench formation.These focuses and research gaps can provide a helpful guide on further research,installation,and operation of deep‐sea structures and foundations.

Design of foundation structures of sea-crossing bridges on serviceability limit state

The target reliability indices of the foundation structures of sea-crossing bridges on the serviceability limit state （SLS） are different from those of common bridges due to their different surroundings. Consequently, three levels of the target reliability indices, which are 1.5, 2. 0 and 2. 3, respectively, for those structures on the SLS are suggested based on the Joint Committee on Structural Safety （JCSS） model code, and a new method of calibrating factors of live loads, which is based on the contribution ratio of tensile stresses of reinforcing bars produced by various loads to the maximum crack width of concrete, is proposed. Finally, the calibration of the reliability-based factors of the frequent value and the quasi-permanent value of live loads is conducted by the Joint Committee （JC） method through an actual design, and the indices are proved to be reasonable and the new method is proved to be feasible.

Design and Engineering of Urban Interchange Ramp Bridge Structure

This paper analyzes the structural design of an urban interchange ramp bridge from four aspects,which are the superstructure,pier structure,foundation structure,and deck structure design to summarize the structural design ideas of this urban interchange ramp bridge,which can be used as a reference for future construction of the same bridge.

Study of vibrating foundations considering soil-pile-structure interaction for practical applications

An investigation of soil-pile-structure interaction is carried out, based on a large reciprocating compressor installed on an elevated concrete foundation （table top structure）. A practical method is described for the dynamic analysis, and compared with a 3D finite element （FE） model. Two commercial software packages are used for dynamic analysis considering the soilpile-structure interaction （SPSI）. Stiffness and damping of the pile foundation are generated from a computer program, and then input into the FE model. To examine the SPSI thoroughly, three cases for the soil, piles and superstructure are considered and compared. In the first case, the interaction is fully taken into account, that is, both the superstructure and soil-pile system are flexible. In the second case, the superstructure is flexible but fixed to a rigid base, with no deformation in the base （no SSI）. In the third case, the dynamic soil-pile interaction is taken into account, but the table top structure is assumed to be rigid. From the comparison beteen the results of these three cases some conclusions are made, which could be helpful for engineering practice.

Sensor monitoring of a newly designed foundation pit supporting structure

A new type of pit supporting structure, which was tested and verified using the sensor monitoring technology, was presented. The new supporting structure is assembled by prefabricated steel structural units. The adjacent steel structural units are jointed with fasteners, and each steel structural unit has a certain radian and is welded by two steel tubes and one piece of steel disc. In order to test and verify the reliability of the new supporting structure, the field tests are designed. The main monitoring programs include the hoop stress of supporting structure, lateral earth pressure, and soil deformation. The monitoring data of the field tests show that the new supporting structure is convenient, reliable and safe.

Experimental investigation of turbulent flows around high-rise structure foundations and implications on scour

Many studies have been undertaken to predict local scour around offshore high-rise structure foundations(HRSFs),which have been used in constructing the Donghai Wind Farm in China.However,there have been few works on the turbulent flow that drives the scour process.In this study,the characteristics of the turbulent flow fields around an HRSF were investigated using the particle image velocimetry technique.The mean flow,vorticity,and turbulence intensity were analyzed in detail.The relationship between the flow feature and scour development around an HRSF was elaborated.The results showed that the flow velocity increased to its maximum value near the third row of the pile group.The shear layer and wake vortices could not be fully developed downstream of the last row of the piles at small Reynolds numbers.The strong flow and turbulent fluctuation near the third piles explained the existence of a longtail scour pattern starting from the HRSF shoulders and a trapezoidal deposition region directly downstream of HRSF.This laboratory experiment gains insight into the mechanism of the turbulent flow around HRSFs and provides a rare dataset for numerical model verifications.

Simplified approach for design of raft foundations against fault rupture.Part II:soil-structure interaction

This is the second paper of two, which describe the results of an integrated research effort to develop a four-step simplified approach for design of raft foundations against dip-slip （normal and thrust） fault rupture. The first two steps dealing with fault rupture propagation in the free-field were presented in the companion paper. This paper develops an approximate analytical method to analyze soil-foundation-structure interaction （SFSI）, involving two additional phenomena： （i） fault rupture diversion （Step 3）; and （ii） modification of the vertical displacement profile （Step 4）. For the first phenomenon （Step 3）, an approximate energy-based approach is developed to estimate the diversion of a fault rupture due to presence of a raft foundation. The normalized critical load for complete diversion is shown to be a function of soil strength, coefficient of earth pressure at rest, bedrock depth, and the horizontal position of the foundation relative to the outcropping fault rupture. For the second phenomenon （Step 4）, a heuristic approach is proposed, which ＂scans＂ through possible equilibrium positions to detect the one that best satisfies force and moment equilibrium. Thus, we account for the strong geometric nonlinearities that govern this interaction, such as uplifting and second order （P-△） effects. Comparisons with centrifuge-validated finite element analyses demonstrate the efficacy of the method. Its simplicity makes possible its utilization for preliminary design.

Analysis of Dynamic Stability of Ocean Gravity Structure Foundations

Based on unified equivalent harmonic loading on seabed foundation and energy approach suggested by the authors, the development of dynamic pore water pressure and stability of soil foundation for the vibration of ocean gravity structures excited by random wave loading are analysed. It may be seen that the present method for the study of dynamic problems of ocean gravity structure soil foundations is more reasonable and convenient.

Finite element response sensitivity analysis of three-dimensional soil-foundation-structure interaction (SFSI) systems

The nonlinear finite element（FE） analysis has been widely used in the design and analysis of structural or geotechnical systems.The response sensitivities（or gradients） to the model parameters are of significant importance in these realistic engineering problems.However the sensitivity calculation has lagged behind,leaving a gap between advanced FE response analysis and other research hotspots using the response gradient.The response sensitivity analysis is crucial for any gradient-based algorithms,such as reliability analysis,system identification and structural optimization.Among various sensitivity analysis methods,the direct differential method（DDM） has advantages of computing efficiency and accuracy,providing an ideal tool for the response gradient calculation.This paper extended the DDM framework to realistic complicated soil-foundation-structure interaction（SFSI） models by developing the response gradients for various constraints,element and materials involved.The enhanced framework is applied to three-dimensional SFSI system prototypes for a pilesupported bridge pier and a pile-supported reinforced concrete building frame structure,subjected to earthquake loading conditions.The DDM results are verified by forward finite difference method（FFD）.The relative importance（RI） of the various material parameters on the responses of SFSI system are investigated based on the DDM response sensitivity results.The FFD converges asymptotically toward the DDM results,demonstrating the advantages of DDM（e.g.,accurate,efficient,insensitive to numerical noise）.Furthermore,the RI and effects of the model parameters of structure,foundation and soil materials on the responses of SFSI systems are investigated by taking advantage of the sensitivity analysis results.The extension of DDM to SFSI systems greatly broaden the application areas of the d gradient-based algorithms,e.g.FE model updating and nonlinear system identification of complicated SFSI systems.

Out-of-plane (SH) soil-structure interaction： a shear wall with rigid and flexible ring foundation

Soil-structure interaction （SSI） of a building and shear wall above a foundation in an elastic half-space has long been an important research subject for earthquake engineers and strong-motion seismologists. Numerous papers have been published since the early 1970s; however, very few of these papers have analytic closed-form solu- tions available. The soil-structure interaction problem is one of the most classic problems connecting the two dis- ciplines of earthquake engineering and civil engineering. The interaction effect represents the mechanism of energy transfer and dissipation among the elements of the dynamic system, namely the soil subgrade, foundation, and super- structure. This interaction effect is important across many structure, foundation, and subgrade types but is most pro- nounced when a rigid superstructure is founded on a rela- tively soft lower foundation and subgrade. This effect may only be ignored when the subgrade is much harder than a flexible superstructure： for instance a flexible moment frame superstructure founded on a thin compacted soil layer on top of very stiff bedrock below. This paper will study the interaction effect of the subgrade and the super- structure. The analytical solution of the interaction of a shear wall, flexible-rigid foundation, and an elastic half- space is derived for incident SH waves with various angles of incidence. It found that the flexible ring （soft layer） cannot be used as an isolation mechanism to decouple asuperstructure from its substructure resting on a shaking half-space.

TIME DOMAIN PARAMETERS IDENTIFICATION OF FOUNDATION-STRUCTURE INTERACTION SYSTEM

The time domain parameter laenuncauon memoa oi me iounuauon-structure interaction system is presented. On the basis of building the computation mode and the motion equation of the foundation-structure interaction system, the system parameter identification method was established by using the extended Kalman filter （EKF） technique and taking the unknown parameters in the system as the augment state variables. And the time parameter identification process of the foundation-structure interaction system was implemented by using the data of the layer foundation-storehouse interaction system model test on the large vibration platform. The computation result shows that the established parameter identification method can induce good parameter estimation.

The Application of Pile Foundation Bearing-Retaining Wall Combination Structure in a Mountainous Urban High Fill Project

Pile foundation bearing-retaining wall combination structure is a new type of support structure developed in recent years.This article focuses on the characteristics,advantages,and application scope of the support structure,while combining a variety of algorithms,according to different geological conditions and slope stability,as well as summarizes the pile foundation bearing-retaining wall combination structure force analysis and design methods,taking a high-fill road project in Chongqing as an example.The application of this support structure under special conditions,such as thicker soil layer,steeper sliding surface,weak foundation,and limited slope release conditions,is presented,which illustrates the technical advantages of this support structure and proving that it has several other advantages,including clear force mechanism as well as economic and reasonable structure,thus providing reference for similar projects.

INFINITE SPLINE BOUNDARY ELEMENT METHOD AND ITS APPLICATION TO STRUCTURE-FOUNDATION INTERACTION

In view of the infinity behaviors of 3-D Kelvin solution, we constructed an infinite spline boundary element which has fine precision in the analysis of the half space foundation subjected to uniform pressure on the circular domain. We also analysed a square plate resting on elastic half space foundation. The results indicate that this model not only fits for the coupled analysis of foundation and structures but also has the advantage of fewer degrees of freedom and fine precision.

Influence of the Soil-Structure Interaction in the Behavior of Mat Foundation

This article focuses on the study of the behavior of a soil mass under a plate subjected to a uniformly distributed load. The aim of this paper is to highlight the soil-structure interaction with a linear variation of the mechanical properties of the soil with the depth. The theory of plates and the soil-structure interaction has allowed reaching the general equation of the problem which depends on both the mechanical properties of the concrete and the subgrade. This study shows that the linearity of the elastic modulus of subgrade leads to larger displacements when this modulus is assumed to be constant in the soil mass. It also shows that the Poisson’s ratio of soil and mechanical properties of the concrete have an insignificant influence on the displacements. This analysis also shows that the points in the upper half-thickness of soil are the most sensitive to the parameters of the model.

Stability Study on the Bucket Foundation with Multi-Compartment During the Floating-up Process Considering Air Compressibility

In the process of developing offshore wind power towards deeper waters,the advantages of the bucket foundation in terms of integrated construction and economy are becoming increasingly evident.In contrast to conventional floating bodies,the air-floating bucket foundations can achieve self-floating with the help of the air in the compartment and adjust its buoyancy and stability by controlling the air volume in the compartment.The construction process of the bucket foundation involves the control of air in the compartment,thus making it more difficult to construct.Especially after the prefabrication of the bucket foundation,the stability of the bucket foundation at the floating-up stage is particularly critical.The stability of a multi-compartment bucket foundation during the floating-up process cannot be accurately evaluated as the existing theoretical method of air-floating structures does not adequately consider air compressibility.To ensure the safety of the floating-up process,a theoretical method based on the idea of intact stability has been developed to analyze the stability of the air-floating bucket foundations,which will allow accurate calculation of the righting arm for different tilt states and critical air leakage angle.At the same time,accuracy and feasibility of the proposed theoretical method are verified through indoor model tests and practical operation of the prototype structure during the floating-up process.In addition,measures to enhance the stability of the bucket foundation are proposed through sensitivity analysis of influencing factors.

Structural Strength Analysis of a Tri-Floater Floating Foundation for Offshore VAWT

Vertical axis wind turbines(VAWTs) are advantageous for the development of large-scale offshore wind power because the drive system is located at the bottom of the turbine. This study investigates the structural strength of a tri-floater floating foundation supporting a 2.6 MW Darrieus VAWT. Finite element models of the floating foundation were developed using space plate-beam elements. The environmental loads, such as the aerodynamic loads, static wind loads, and wave-current loads, were considered. The general strengths of the floating foundation were calculated for the normal operating case(a cut-out wind speed of 25 m s^(-1) and blade rotation of 12 r min^(-1) were used to analyze the most unfavorable loads) and an extreme case(wind speed of 40 m s^(-1) and parked blades), and the weak components of the structure were analyzed. The results show that the floating foundation meets the strength requirements and the structural stress is highest when the wave, wind, and current are in a collinear direction. The main and secondary supporting bars transmit the loads between the stand columns and the tower foundation, and their stresses are higher than those in the other components. In the actual design, these supporting bars should be strengthened. The aerodynamic loads are very important and should be considered in the structural strength analysis of the floating foundation and the floating wind turbine system.

Structural Behavior of Tall Building Raft Foundations in Earthquake Zones

The paper studies the behavior of reinforced concrete raft foundations for multi-story buildings. It also develops a reliability assessment tool for multi- story building raft foundations subjected to earthquake loading. Several multi-story buildings with various configurations, heights, and soil profiles, were subjected to several ACI code combinations of gravity and earthquake loads from different seismic zones. The reliability of the raft foundations of these buildings was assessed using the reliability index approach based on their resistance to the applied loads. Also, the responses of the multi-story buildings under these loading combinations were studied and analyzed in order to draw recommendations and guidelines for the preliminary design of structurally efficient and reliable raft foundations in earthquake zones.

Numerical Analysis and Study of the Dynamic Response of Structural Systems for Machinery Foundations

This work aims the deterministic dynamic analysis,in the time and frequency domain,of a reinforced concrete floor supported by a pre-cast pile foundation system,when subjected to the excitation produced by a large compressor installed in an industry for the production of air gases.The concrete slab presents a dimension of 12 m×15 m,required to support a compressor-motor assembly weighting 1,900 kN and positioned at a height of 4m of the investigated concrete floor.In this investigation,two numerical models were developed and the difference between these models is characterized by the discretization of the support points(pre-cast concrete piles).The developed numerical model adopted the usual mesh refinement techniques present in finite element method simulations implemented in the CSi SAP2000 V.17.2.0 software.Based on the developed analysis methodology,the dynamic structural response of the foundation system is evaluated in terms of natural frequencies,vibration modes,displacements,velocities,and accelerations.The maximum values of the dynamic response of the system are compared with the limit values recommended by standards and project recommendations,aiming a careful evaluation,regarding the performance of the structure in terms of excessive vibrations and the economic aspects involved in the design of the foundation system.Finally,the obtained results of the two developed numerical models are compared,as to evaluate if there are benefits in refining the support points modelling.

Design of Large-Scale Prestressing Bucket Foundation for Offshore Wind Turbines

The key in the force transmission between the tower and the foundation for offshore wind turbines is to transfer the large moment and horizontal loads. The finite element model of a large-scale prestressing bucket founda- tion for offshore wind turbines is set up and the structural characteristics of the arc transition structure of the founda- tion are analyzed for 40-60 channels(20-30 rows) arranged with prestressing steel strand under the same ultimate load and boundary conditions. The mechanical characteristics of the key parts of the foundation structures are illus- trated by the peak of the principal tensile stress, the peak of the principal compressive stress and the distribution areas where the principal tensile stress is larger than 2.00 MPa. It can be concluded that the maximum principal tensile stress of the arc transition decreases with the increasing number of channels, and the amplitude does not change signifi- cantly; the maximum principal compressive stress increases with the increasing number of channels and the amplitude changes significantly; however, for the distribution areas where the principal tensile stress is larger than 2.00 MPa, with different channel numbers, the phenomenon is not obvious. Furthermore, the principal tensile stress at the top of the foundation beams fluctuantly increases with the increasing number of channels and for the top cover of the bucket, the principal tensile stress decreases with the increasing number of channels.