Inverted perovskite solar cells(IPSCs) have attracted tremendous research interest in recent years due to their applications in perovskite/silicon tandem solar cells. However, further performance improvements and long...Inverted perovskite solar cells(IPSCs) have attracted tremendous research interest in recent years due to their applications in perovskite/silicon tandem solar cells. However, further performance improvements and long-term stability issues are the main obstacles that deeply hinder the development of devices. Herein, we demonstrate a facile atomic layer deposition(ALD) processed tin dioxide(SnO2) as an additional buffer layer for efficient and stable wide-bandgap IPSCs. The additional buffer layer increases the shunt resistance and reduces the reverse current saturation density, resulting in the enhancement of efficiency from 19.23% to 21.13%. The target device with a bandgap of 1.63 eV obtains open-circuit voltage of 1.19 V, short circuit current density of 21.86 mA/cm^(2), and fill factor of 81.07%. More importantly, the compact and stable SnO_(2) film invests the IPSCs with superhydrophobicity, thus significantly enhancing the moisture resistance. Eventually, the target device can maintain 90% of its initial efficiency after 600 h storage in ambient conditions with relative humidity of 20%–40% without encapsulation. The ALD-processed SnO_(2) provides a promising way to boost the efficiency and stability of IPSCs, and a great potential for perovskite-based tandem solar cells in the near future.展开更多
A new method for the rapid separation of gangliosides(GLS)by capillary electrophoresis(CE)is described which is based on the use of β—cyclodextrin(β—CD)as buffer additive.The effects of β—CD concentration,pH,ele...A new method for the rapid separation of gangliosides(GLS)by capillary electrophoresis(CE)is described which is based on the use of β—cyclodextrin(β—CD)as buffer additive.The effects of β—CD concentration,pH,electrolyte composition were dis- cussed.Under optimum conditions,the complete separation of a mixture of GM1,GD1a, GD1b and GT1b was obtained within 5 min.展开更多
基金the supports from National Key Research and Development Program of China(Grant No.2018YFB1500103)the Overseas Expertise Introduction Project for Discipline Innovation of Higher Education of China(Grant No.B16027)+3 种基金Tianjin Science and Technology Project(Grant No.18ZXJMTG00220)the Fundamental Research Funds for the Central Universities,Nankai University(Grant Nos.63191736,ZB19500204)Natural Science Foundation of Tianjin(No.20JCQNJC02070)China Postdoctoral Scie nce Foundation(No.2020T130317)。
文摘Inverted perovskite solar cells(IPSCs) have attracted tremendous research interest in recent years due to their applications in perovskite/silicon tandem solar cells. However, further performance improvements and long-term stability issues are the main obstacles that deeply hinder the development of devices. Herein, we demonstrate a facile atomic layer deposition(ALD) processed tin dioxide(SnO2) as an additional buffer layer for efficient and stable wide-bandgap IPSCs. The additional buffer layer increases the shunt resistance and reduces the reverse current saturation density, resulting in the enhancement of efficiency from 19.23% to 21.13%. The target device with a bandgap of 1.63 eV obtains open-circuit voltage of 1.19 V, short circuit current density of 21.86 mA/cm^(2), and fill factor of 81.07%. More importantly, the compact and stable SnO_(2) film invests the IPSCs with superhydrophobicity, thus significantly enhancing the moisture resistance. Eventually, the target device can maintain 90% of its initial efficiency after 600 h storage in ambient conditions with relative humidity of 20%–40% without encapsulation. The ALD-processed SnO_(2) provides a promising way to boost the efficiency and stability of IPSCs, and a great potential for perovskite-based tandem solar cells in the near future.
文摘A new method for the rapid separation of gangliosides(GLS)by capillary electrophoresis(CE)is described which is based on the use of β—cyclodextrin(β—CD)as buffer additive.The effects of β—CD concentration,pH,electrolyte composition were dis- cussed.Under optimum conditions,the complete separation of a mixture of GM1,GD1a, GD1b and GT1b was obtained within 5 min.
