A Stroke-Limitation AMD Control System with Variable Gain and Limited Area for High-Rise Buildings

Collisions between a moving mass and an anti-collision device increase structural responses and threaten structural safety.An active mass damper(AMD)with stroke limitations is often used to avoid collisions.However,a strokelimited AMD control system with a fixed limited area shortens the available AMD stroke and leads to significant control power.To solve this problem,the design approach with variable gain and limited area(VGLA)is proposed in this study.First,the boundary of variable-limited areas is calculated based on the real-time status of the moving mass.The variable gain(VG)expression at the variable limited area is deduced by considering the saturation of AMD stroke.Then,numerical simulations of a stroke-limited AMD control system with VGLA are conducted on a high-rise building structure.These numerical simulations show that the proposed approach has superior strokelimitation performance compared with a stroke-limited AMD control system with a fixed limited area.Finally,the proposed approach is validated through experiments on a four-story steel frame.

The Building of New Countryside in Poverty-stricken Mountainous Area: A case of Hongyan Village,Haizijie Township of Bijie City

The essential drive of building a new countryside lies in scientific and technological innovation. Through expounding the scientific and technological demonstration benefits and roles of new countryside building in poverty-stricken mountainous area,the major problems and hardships of new countryside building in poverty-stricken area are analyzed and the new breakthroughs which should be focused on during the building of a new countryside are put forward. These breakthroughs include transforming the philosophy and approach of rural work; highlighting the construction of rural operation mode and rural socialized service system,and improving the quality of rural labors.

Role of outdoor trees on pedestrian wind and thermal conditions around a pre-education building for sustainable energy management

Finding sustainable energy resources is essential to face the increasing energy demand.Trees are an important part of ancient architecture but are becoming rare in urban areas.Trees can control and tune the pedestrian-level wind velocity and thermal condition.In this study,a numerical investigation is employed to assess the role of trees planted in the windward direction of the building complex on the thermal and pedestrian wind velocity conditions around/inside a pre-education building located in the center of the complex.Compared to the previous studies(which considered only outside buildings),this work considers the effects of trees on microclimate change both inside/outside buildings.Effects of different parameters including the leaf area density and number of trees,number of rows,far-field velocity magnitude,and thermal condition around the main building are assessed.The results show that the flow velocity in the spacing between the first-row buildings is reduced by 30%-40% when the one-row trees with 2 m height are planted 15 m farther than the buildings.Furthermore,two rows of trees are more effective in higher velocities and reduce the maximum velocity by about 50%.The investigation shows that trees also could reduce the temperature by about 1℃around the building.

Test and Analysis of Indoor Thermal Environment of Urban Heating Residential Building in Hanzhong Area

By testing indoor and outdoor thermal environment of residential buildings that apply 4 mostused heating ways in Hantai District,Hanzhong City,this paper explored the indoor thermal environment conditions of different heating ways,to provide references for choosing a suitable heating way in the local area.

Thermal adaptation in overheated residential buildings in severe cold area in China

The winter in the severe cold area of China is long and cold. The mean outdoor temperature is about-10. 0 ℃ during the winter in Harbin,while the indoor air temperature is often above24 ℃. How does the indoor environment influence human thermal comfort and adaptation in such an overheated environment?A combined approach of spot-reading measurements and occupant interview s w as adopted in nine residential buildings of five communities during the heating period in 2013-2014. Tw enty residents w ere chosen as respondents. Totally 308 valid questionnaires w ere collected. The heating periods w ere separated into three phases based on the outdoor temperature.The results show that the mean indoor air temperatures in theearly-,mid-and late-heating periods w ere 23. 6 ℃,24. 3 ℃and 25. 0 ℃,respectively,w hich w ere larger than or close to the upper limit recommended by thermal comfort standards, and slightly higher than the related thermal neutral temperatures. With the heating process,the mean clothing insulation of residents decreased. Opening w indow s and reducing clothing w ere mainly taken by the residents to adapt to the overheated environment.The thermal neutral temperature has an upw ard tendency w ith the increasing indoor air temperature. On the other hand,overheating in residential buildings w ould make residents open w indow s,w hich may cause thermal discomfort and energy w aste. Therefore,the low er limit of the comfort indoor air temperature range should be suggested as the heating temperature,w hich could fully arouse residents' adaptation and achieve sustainable building designs.

The Building Extraction Based on Object Oriented Classification Method in High Vegetation Coverage Area

Quickly extraction of building information technology is an important application in urban development planning, electronic information, national defense and others. This paper takes Landsat-8 multispectral and panchromatic data as data source, using the local variance method to select the optimal segmentation scale, normalized difference vegetation index (NDVI) and the normalized building index (NDBI) and panchromatic brightness value of an object oriented classification rule extraction. The high vegetation coverage area of buildings, and through the spatial relationships and distinguishing feature of collections of buildings independent buildings and villages. The results showed that Google earth high resolution image analysis and accuracy evaluation. the results of the extraction based on the overall accuracy of village extraction was 83%, the accuracy of extraction of independent buildings was 70%, according to the L8 remote sensing data, object oriented classification method can quickly and accurately extract the high vegetation coverage area of the building.

A WiFi-ZigBee Building Area Network Design of High Traffics AMI for Smart Grid

A WiFi-ZigBee hybrid BAN solution, namely WiZBAN, is proposed and implemented to cater for the development of high traffic AMI for smart grid application. It is important to highlight that the major challenge of WiZBAN is to handle the high density environment which results in heavy traffic loading and weak signal propagation. To overcome the captioned problem, Vertical Backbone Communication (VBC) and Horizontal Floor Communication (HFC) are defined for WiZBAN. The WiZBAN consists of WiZBAN Gateway (WiZGW), WiZBAN Meter Hub (WiZBAN) and WiZBAN In Home Display (WiZIHD) which caters for the smart grids services including smart metering and demand response. The WiZGW is the entrance of WiZBAN and connects WiZBAN to utilities. The WiZGW also teams up with WiZMH to enables VBC. On the other hand, WiZMH serves as the interception point of VBC and HFC. It interacts with smart meters and sets up the HFC together with WiZIHD to provide the user interface for end users. To shorten the transmission time, WiFi is adopted for VBC while ZigBee is applied to HCF to overcome the weak signal propagation. To investigate the performance of WiZBAN, a case study has been conducted based on an existing 23 floor residential building. From the measured and simulated results, the average round trip delay of demand response and smart metering are found to be 0.6 s and 9 s respectively.

Ground stability of new surface buildings erected on site above worked-out area

The subsided area caused by mining is expanding gradually in coal mining areas. In order to occupy less or no farmland, many mining areas are constructing or intend to erect new buildings (structures) on the ground sites above the worked-out areas. The long-term safety of the new buildings is of great importance. This matter should be, therefore, handled with great care. Following an analysis of the different conditions of the worked-out areas, and the characteristics of the failure of different types of worked-out areas and their overlying strata, the cause for the occurrence of residual deformation of the surface above the worked-out area was explained. The techniques for (evaluating) the stability of ground site for erecting new buildings above worked-out area, and the technical measures for protecting such buildings were proposed. The ground stability evaluation techniques were introduced by reference to specific cases.

Study on Integrated Design of Building Facilities in Scenic Areas

The authors begin with traditional architectural design methodology,review basic theories and development trends of architectural designs from the ancient times to the present.On the basis of combining traditional oriental integral view,modern architectural design and landscape design theories,current construction of building facilities in scenic areas are analyzed,integrated design of the building facilities is proposed,and"integrated design system"further analyzed to offer effective references and theoretical support for the design and construction of building facilities in scenic areas.

Energy-saving Planning and Design of Urban Residential Buildings in Hanzhong Area

Energy-saving design of residential building is an important part of energy-saving architectural design. Planning and design of residential buildings in Hanzhong area should pay more attention to the building orientation, sunshine, summer ventilation and wind resistance in winter and so on, so as to create favorable conditions for energy-saving design of single buildings. The geographical location, climatic characteristics, residents living habits and indoor and outdoor thermal environment situation were analyzed in this paper, and combined with the existing problems of energy conservation in the planning and layout of residential buildings in Hanzhong area. Based on the investigation, this paper drew some conclusions to provide references for the energy-saving planning and design of urban residential buildings in the local area.

Research on Evaluation System of Green Residential Buildings in Cold Areas of Sichuan

With regard to the rapid growth of China’s building area and the increasing energy consumption of buildings, green buildings have become an important issue for balancing economic development and environmental impact. However, the current evaluation systems for various types of green buildings are often unable to achieve a set of standards in practice due to the distinct regional characteristics of each region. Therefore, in view of the regional characteristics of the climate, terrain, ecology, and economic development in the cold regions of Sichuan, it is important to study the evaluation system of green residential buildings suitable for the cold regions of Sichuan. This article focuses on the regional characteristics of climate, topography, ecology, and economic development in the cold regions of Sichuan, and discusses the limitations of the current standards on the practice of green building in cold regions of Sichuan through a sociological questionnaire survey on the comfort of living in the local population. Then from the two dimensions of the advantages of traditional houses and the particularity of national culture, the strategies for the optimization and improvement of the evaluation index system for green residential buildings in the cold regions of Sichuan were proposed. After comprehensively considering the factors that affect the green residential buildings, including the regional characteristics of the cold regions of Sichuan, and the green performance of buildings, local characteristics and ethnic features were included in the evaluation system. The evaluation index system of green residential buildings in the cold regions of Sichuan, consists of 92 three-level indicators. A professional hierarchical analysis software yaahp was used to establish a multi-level hierarchical model between the indicators, and the indicators were compared with each other layer by layer to clarify the importance of the indicators. Based on this, a judgment matrix for each layer was constructed and obtained. The weight of each indicator is accurate, and the scoring mechanism and grading standards are constructed according to it. Through the calculation, the consistency test of the entire model was passed, thereby confirming the scientificity and rationality of the entire evaluation system.

Research on the Development of Green Building Technology in Hot Summer and Cold Winter Area under the Background of Carbon Neutrality:A Case Study of Zhuzhou City

Carbon sequestration and emission reduction in the construction industry plays an important role in China’s goal of achieving carbon neutrality.Research in Zhuzhou city scored 42 since the assessment of the green building project situation as the research object,in hot summer and cold winter areas of analysis and evaluation on the development of green building technology,and then sums up the carbon neutral background the priority areas and tasks for the development of green building techniques,optimization of the construction industry into a new era under the background of green development to provide the reference.

Idle School Buildings in Rural Areas: Will they Be Useful?

Taking the case of Enshi City,we survey the supply of public services in rural areas from education,health,culture and social security; reveal the relationship between the use of idle school buildings in rural areas and the improvement of public services in rural areas. On the basis of expounding the status quo of idle school buildings and public services in rural areas of Enshi City,the following recommendations are put forward: using the idle school buildings to develop rural public education; using the idle school buildings to develop rural public health and medical services; using the idle school buildings to develop public cultural undertakings in rural areas; using the idle school buildings to develop social security undertakings in rural areas.

Research on the Evaluation Indicator System for Rural Green Building

Based on the actual situation and the survey results in rural areas,with the domestic and foreign advanced green building standard as a reference,we initially determine the evaluation indicator system for rural green building. We use the AHP-Delphi method to calculate the weight,and get a multi-goal,multi-factor,and multi-level rural green building evaluation method suitable for the rural environment,social and economic situation,and apply this method to 10 villages in Shaanxi Province. After the evaluation and scoring,we give the following recommendations:( i) Strengthening the energy-saving design and improving the living comfort;( ii) Enhancing the application of appropriate technologies;( iii) Improving the level of development environment.

Public Space Demand and Adaptive Behavior of Residents in Old Residential Area of Ancient City: Based on Qingyi Garden of Beirenyi Hutong in Kaifeng

The majority of the literature on the transformation of cultural promotion space in old residential areas in the United States and abroad is written from the top-down perspective of God,such as architects,planners,developers,and even government officials,and only a few of them examine the designer’s work from the perspective of aborigines.To sample life and gain insight into human nature,find another means to be as near to the public as possible,listen to the voice of users,and conduct an in-depth examination of the freestyle works altered by the old residential districts through the“people’s architectural planner.”

A novel approach for assessing color harmony of historical buildings via street view image

While new buildings continue to emerge in the process of urbanization,historical buildings,as valuable legacies carrying national historical memory,play an important role in the urban landscape.Previous studies have shown that color harmony is a crucial factor in coordinating urban landscapes.However,the evaluation of color harmony in historic areas and buildings lacks effective quantitative standards,often overlooking factors such as complementary color harmony and the compatibility of analogous colors.This study aims to build a new method to evaluate the color harmony of historical buildings through street view technology,semantic segmentation algorithms,quantification of color harmony methods based on image property detection and classification,questionnaire verification,and takes Shanghai’s historical buildings as an example to explore.Our study categorizes six types of color harmony indexes for Shanghai street-facing historic buildings into three levels,with the top tier serving as a benchmark for excellence and the lowest tier highlighting areas in need of urban environmental improvement.This study uniquely considers color compatibility within hue ranges and expanded relationship types like complementary harmony.This approach,applicable to cities globally,offers practical tools for urban planners and conservators in managing and preserving historic areas and buildings.

Mechanisms of salt rejection at the ice-liquid interface during the freezing of pore fluids in the seasonal frozen soil area

Seasonal frozen soil accounts for about 53.50%of the land area in China.Frozen soil is a complex multiphase system where ice,water,soil,and air coexist.The distribution and migration of salts in frozen soil during soil freezing are notably different from those in unfrozen soil areas.However,little knowledge is available about the process and mechanisms of salt migration in frozen soil.This study explores the mechanisms of salt migration at the ice-liquid interface during the freezing of pore fluids through batch experiments.The results are as follows.The solute concentrations of liquid and solid phases at the ice-liquid interface(C*_(L),C*_(S))gradually increased at the initial stage of freezing and remained approximately constant at the middle stage.As the ice-liquid interface advanced toward the system boundary,the diffusion of the liquid phase was blocked but the ice phase continued rejecting salts.As a result,C*_(L)and C*_(S)rapidly increased at the final stage of freezing.The distribution characteristics of solutes in ice and the liquid phases before C*_(L)and C*_(S)became steady were mainly affected by the freezing temperature,initial concentrations,and particle-size distribution of media(quartz sand and kaolin).In detail,the lower the freezing temperature and the better the particle-size distribution of media,the higher the solute proportion in the ice phase at the initial stage of freezing.Meanwhile,the increase in concentration first promoted but then inhibited the increase of solutes in the ice phase.These results have insights and scientific significance for the tackling of climate change,the environmental protection of groundwater and soil,and infrastructure protection such as roads,among other things.

Pedestrian-level wind conditions around buildings:Review of wind-tunnel and CFD techniques and their accuracy for wind comfort assessment

Information on pedestrian-level wind(PLW)speed for wind comfort assessment can be obtained by wind-tunnel measurements or Computational Fluid Dynamics(CFD)simulations.Wind-tunnel measurements for PLW are routinely performed with low-cost techniques such as hot-wire or hot-film anemometers,Irwin probes or sand erosion,while Laser-Doppler Anemometry(LDA)and Particle-Image Velocimetry(PIV)are less often used because they are more expensive.CFD simulations are routinely performed by the relatively low-cost steady Reynolds-AveragedNavier-Stokes(RANS)approach.Large-Eddy Simulation(LES)is less often used because of its larger complexity and cost.This paper reviews wind-tunnel and CFD techniques to determine PLW speeds expressed generally in terms of amplification factors defined as the ratio of local mean wind speed to mean wind speed at the same position without buildings present.Some comparative studies systematically indicate that the low-cost wind-tunnel techniques and steady RANS simulations can provide accurate results(~10%)at high amplification factors(>1)while their accuracy can deteriorate at lower amplification factors(<1).This does not necessarily compromise the accuracy of PLW comfort assessment,because the higher amplification factors provide the largest contribution to the discomfort exceedance probability in the comfort criterion.Although LDA,PIV and LES are inherently more accurate techniques,this paper supports the continued use of faster and less expensive techniques for PLW studies.Extrapolating a previous saying,we argue that pedestrian-level wind comfort is one of the few topics in wind engineering where nature is kind to us concerning turbulent flows.

Privacy Preservation Scheme for Multicast Communications in Smart Buildings of the Smart Grid

Privacy preservation is a crucial issue for smart buildings where all kinds of messages, e.g., power usage data, control commands, events, alarms, etc. are transmitted to accomplish the management of power. Without appropriate privacy protection schemes, electricity customers are faced with various privacy risks. Meanwhile, the natures of smart grids and smart buildings—such as having limited computation power of smart devices and constraints in communication network capabilities, while requiring being highly reliable—make privacy preservation a challenging task. In this paper, we propose a group key scheme to safeguard multicast privacy with the provisions of availability, fault-tolerance, and efficiency in the context of smart buildings as a part the smart grid. In particular, hybrid architecture accommodating both centralized and contributory modes is constructed in order to achieve both fault-tolerance and efficiency with only one set of group key installed. Key trees are sophisticatedly managed to reduce the number of exponentiation operations. In addition, an individual rekeying scheme is introduced for occasional joining and leaving of member smart meters. Experimental results, on a simulation platform, show that our scheme is able to provide significant performance gains over state-of-the-art methods while effectively preserving the participants’ privacy.

System of Combined Foundation for Tall Buildings

Location of the heavily loaded building on the ground of the small load capacity requires application of the appropriate foundation structure. The required foundation system is most often deep, it is expensive and its cost increases significantly when the building is located in earthquake area or in mining damage sector. The proposed structural system of the combined foundation makes possible to design and to construct a very stable and relative inexpensive foundation structure, which can obtain an extremely large horizontal surface and which can be placed not deeply beneath the terrain level. It can be a very solid support structure for a tall building placed on very weak subsoil and at the same time located in seismic area. This system can be applied not only for new buildings but it can be used for the existing buildings and moreover for straighten of the inclined objects. Due to special arrangement of component parts the combined foundation possesses inherent features of a vibration damper, what is highly desirable if buildings have to be located in earthquake areas. When the aboveground storeys structure has some similar patterns with structural form of the combined foundation then the structural system of the whole building obtains coherent structural characteristics and it is called the combined structural system of the tall building. Suitable application of this system makes possible to design high-rise buildings having interesting and unique architectonic forms, what is presented on a selected example.