Exploring the synergy of building massing and façade design through evolutionary optimization

In performance-based architectural design optimization, the design of building massings and façades is commonly separated, which weakens the effectiveness in performance improvement. In response, this study proposes a hybrid massing-façade integrated design generation and optimization workflow to integrate the two elements in an evolutionary design process. Compared with the existing approaches, the proposed workflow emphasizes the diversity of building design generation, with which various combinations of building massing forms and façade patterns can be systematically explored. Two case studies and a corresponding comparison study are presented to demonstrate the efficacy of the proposed workflow. Results show that the optimization can produce designs coupling the potential of building massings and façades in performance improvement. In addition, the optimization can provide information that supports early-stage architectural design exploration. Such information also enables the architect to understand the performance implications associated with the synergy of building massing and façade design.

Building dynamic thermal simulation of low-order multi-dimensional heat transfer

Multi-dimensional heat transfers modeling is crucial for building simulations of insulated buildings,which are widely used and have multi-dimensional heat transfers characteristics.For this work,state-model-reduction techniques were used to develop a reduced low-order model of multi-dimensional heat transfers.With hot box experiment of hollow block wall,heat flow relative errors between experiment and low-order model predication were less than 8% and the largest errors were less than 3%.Also,frequency responses of five typical walls,each with different thermal masses or insulation modes,the low-order model and the complete model showed that the low-order model results agree very well in the lower excitation frequency band with deviations appearing only at high frequency.Furthermore,low-order model was used on intersection thermal bridge of a floor slab and exterior wall.Results show that errors between the two models are very small.This low-order model could be coupled with most existing simulation software for different thermal mass envelope analyses to make up for differences between the multi-dimensional and one-dimensional models,simultaneously simplifying simulation calculations.