面向RISC-V适配开发的x86 built-in函数转换方法

新兴架构RISC-V的生态建设需要将其他架构函数或软件包向RISC-V架构迁移适配。在研究GCC特定架构适配的built-in函数向RISC-V架构迁移时,提出一套x86到RISC-V的built-in函数转换方法,对于非扩展指令集(属非向量类型)built-in函数,采用RISC-V架构下相同功能的built-in或标准库函数替代;对于SSE扩展指令集built-in函数,建立数据类型映射和向量函数操作映射实现向RISC-V架构向量扩展函数或标准库函数的迁移,其中RVV函数迁移方式占比67%。实验结果表明:方法迁移的程序功能正确,方法有效。本文方法对其他扩展指令集built-in函数的迁移提供了指导,且与现有工作相比,更易扩展、覆盖面更广。

Constructing Built-In Electric Fields with Semiconductor Junctions and Schottky Junctions Based on Mo-MXene/Mo-Metal Sulfides for Electromagnetic Response

The exploration of novel multivariate heterostructures has emerged as a pivotal strategy for developing high-performance electromagnetic wave(EMW)absorption materials.However,the loss mechanism in traditional heterostructures is relatively simple,guided by empirical observations,and is not monotonous.In this work,we presented a novel semiconductor-semiconductor-metal heterostructure sys-tem,Mo-MXene/Mo-metal sulfides(metal=Sn,Fe,Mn,Co,Ni,Zn,and Cu),including semiconductor junctions and Mott-Schottky junctions.By skillfully combining these distinct functional components(Mo-MXene,MoS_(2),metal sulfides),we can engineer a multiple heterogeneous interface with superior absorption capabilities,broad effective absorption bandwidths,and ultrathin matching thickness.The successful establishment of semiconductor-semiconductor-metal heterostructures gives rise to a built-in electric field that intensifies electron transfer,as confirmed by density functional theory,which collaborates with multiple dielectric polarization mechanisms to substantially amplify EMW absorption.We detailed a successful synthesis of a series of Mo-MXene/Mo-metal sulfides featuring both semiconductor-semiconductor and semiconductor-metal interfaces.The achievements were most pronounced in Mo-MXene/Mo-Sn sulfide,which achieved remarkable reflection loss values of-70.6 dB at a matching thickness of only 1.885 mm.Radar cross-section calculations indicate that these MXene/Mo-metal sulfides have tremendous potential in practical military stealth technology.This work marks a departure from conventional component design limitations and presents a novel pathway for the creation of advanced MXene-based composites with potent EMW absorption capabilities.

Modulating charge separation and transfer for high-performance photoelectrodes via built-in electric field

Constructing a built-in electric field has emerged as a key strategy for enhancing charge separation and transfer,thereby improving photoelectrochemical performance.Recently,considerable efforts have been devoted to this endeavor.This review systematically summarizes the impact of built-in electric fields on enhancing charge separation and transfer mechanisms,focusing on the modulation of built-in electric fields in terms of depth and orderliness.First,mechanisms and tuning strategies for built-in electric fields are explored.Then,the state-of-the-art works regarding built-in electric fields for modulating charge separation and transfer are summarized and categorized according to surface and interface depth.Finally,current strategies for constructing bulk built-in electric fields in photoelectrodes are explored,and insights into future developments for enhancing charge separation and transfer in high-performance photoelectrochemical applications are provided.

VSe_(2)/V_(2)C heterocatalyst with built-in electric field for efficient lithium-sulfur batteries:Remedies polysulfide shuttle and conversion kinetics

Lithium sulfur(Li-S)battery is a kind of burgeoning energy storage system with high energy density.However,the electrolyte-soluble intermediate lithium polysulfides(Li PSs)undergo notorious shuttle effect,which seriously hinders the commercialization of Li-S batteries.Herein,a unique VSe_(2)/V_(2)C heterostructure with local built-in electric field was rationally engineered from V_(2)C parent via a facile thermal selenization process.It exquisitely synergizes the strong affinity of V_(2)C with the effective electrocatalytic activity of VSe_(2).More importantly,the local built-in electric field at the heterointerface can sufficiently promote the electron/ion transport ability and eventually boost the conversion kinetics of sulfur species.The Li-S battery equipped with VSe_(2)/V_(2)C-CNTs-PP separator achieved an outstanding initial specific capacity of 1439.1 m A h g^(-1)with a high capacity retention of 73%after 100 cycles at0.1 C.More impressively,a wonderful capacity of 571.6 mA h g^(-1)was effectively maintained after 600cycles at 2 C with a capacity decay rate of 0.07%.Even under a sulfur loading of 4.8 mg cm^(-2),areal capacity still can be up to 5.6 m A h cm^(-2).In-situ Raman tests explicitly illustrate the effectiveness of VSe_(2)/V_(2)C-CNTs modifier in restricting Li PSs shuttle.Combined with density functional theory calculations,the underlying mechanism of VSe_(2)/V_(2)C heterostructure for remedying Li PSs shuttling and conversion kinetics was deciphered.The strategy of constructing VSe_(2)/V_(2)C heterocatalyst in this work proposes a universal protocol to design metal selenide-based separator modifier for Li-S battery.Besides,it opens an efficient avenue for the separator engineering of Li-S batteries.

Bimetallic selenide heterostructure with directional built-in electricfield confined in N-doped carbon nanofibers for superior sodium storage with ultralong lifespan

Constructing heterostructure is considered as an effective strategy to address the sluggish electronic and ionic kinetics of anode materials for sodium ion batteries(SIBs).However,realizing the orientated growth and uniform distribution of the heterostructure is still a great challenge.Herein,the regulated novel CoSe_(2)/NiSe_(2)heterostructure confined in N-doped carbon nanofibers(CoSe_(2)/NiSe_(2)@N-C)are prepared by using Co/Ni-ZIF template,in which,the CoSe_(2)/NiSe_(2)heterostructures realize uniform distribution on a micro level.Benefiting from the unique heterostructure and N-doped carbon nanofibers,the CoSe_(2)/NiSe_(2)@N-C deliveries superior rate capability and durable cycle lifespan with a reversible capacity of 400.5 mA h g^(-1)after 5000 cycles at 2 A g^(-1).The Na-ion full battery with CoSe_(2)/NiSe_(2)@N-C anode and layered oxide cathode displays a remarkable energy density of 563 W h kg^(-1)with 241.1 W kg^(-1)at 0.1 A g^(-1).The theoretical calculations disclose that the periodic and directional built-in electric-field along with the heterointerfaces of CoSe_(2)/NiSe_(2)@N-C can accelerate electrochemical reaction kinetics.The in(ex)situ experimental measurements reveal the reversible conversion reaction and stable structure of CoSe_(2)/NiSe_(2)@N-C during Na+insertion/extraction.The study highlights the potential ability of precisely controlled heterostructure to stimulate the electrochemical performances of advanced anode for SIBs.

Interfacial built-in electric field and crosslinking pathways enabling WS_(2)/Ti_(3)C_(2)T_(x) heterojunction with robust sodium storage at low temperature

Developing efficient energy storage for sodium-ion batteries(SIBs)by creating high-performance heterojunctions and understanding their interfacial interaction at the atomic/molecular level holds promise but is also challenging.Besides,sluggish reaction kinetics at low temperatures restrict the operation of SIBs in cold climates.Herein,cross-linking nanoarchitectonics of WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,featuring built-in electric field(BIEF),have been developed,employing as a model to reveal the positive effect of heterojunction design and BIEF for modifying the reaction kinetics and electrochemical activity.Particularly,the theoretical analysis manifests the discrepancy in work functions leads to the electronic flow from the electron-rich Ti_(3)C_(2)T_(x) to layered WS_(2),spontaneously forming the BIEF and“ion reservoir”at the heterogeneous interface.Besides,the generation of cross-linking pathways further promotes the transportation of electrons/ions,which guarantees rapid diffusion kinetics and excellent structure coupling.Consequently,superior sodium storage performance is obtained for the WS_(2)/Ti_(3)C_(2)T_(x) heterojunction,with only 0.2%decay per cycle at 5.0 A g^(-1)(25℃)up to 1000 cycles and a high capacity of 293.5 mA h g^(-1)(0.1A g^(-1)after 100 cycles)even at-20℃.Importantly,the spontaneously formed BIEF,accompanied by“ion reservoir”,in heterojunction provides deep understandings of the correlation between structure fabricated and performance obtained.

Influence of lactic acid on the two-phase anaerobic digestion of kitchen wastes

To evaluate the influence of lactic acid on the methanogenesis, anaerobic digestion of kitchen wastes was firstly conducted in a two-phase anaerobic digestion process, and performance of two digesters fed with lactic acid and glucose was subsequently compared. The results showed that the lactic acid was the main fermentation products of hydrolysis-acidification stage in the two-phase anaerobic digestion process for kitchen wastes. The lactic acid concentration constituted approximately 50% of the chemical oxygen demand （COD） concentration in the hydrolysis-acidification liquid. The maximum organic loading rate was lower in the digester fed with lactic acid than that fed with glucose. Volatile fatty acids （VFAs） and COD removal were deteriorated in the methanogenic reactor fed with lactic acid compared to that fed with glucose. The specific methanogenic activity （SMA） declined to 0.343 g COD/（gVSS-d） when the COD loading were designated as 18.8 g/（L-d） in the digester fed with lactic acid. The propionic acid accumulation occurred due to the high concentration of lactic acid fed. It could be concluded that avoiding the presence of the lactic acid is necessary in the hydrolysis-acidification process for the improvement of the two-phase anaerobic digestion process of kitchen wastes.

Experimental Study of Thermoelectric Heat Pump Water Heater with Exhaust Heat Recovery from Kitchens

A new kind of thermoelectric heat pump water heater for kitchens exhaust heat recovery was presented,and its performances were investigated under different operating voltages.The experiment results show that the coefficient of performance decreases and the temperature difference between the hot and cold sides becomes larger with the increase of the operating voltage,but the heating time becomes short.The higher the temperature of water,the greater the temperature difference between the hot and cold sides,leading to a smaller coefficient of performance.Under an exhaust temperature of 36 ℃,the coefficient of performance decreases from 1.66 to 1.22 when the temperature of water increases from 28 ℃ to 46 ℃ with operating voltage 16 V.Performance tests illustrate that,compared with the conventional electrical water heaters,the new kind of thermoelectric heat pump water heater is more coefficient.

Engineering properties for high kitchen waste content municipal solid waste

Engineering properties of municipal solid waste （MSW） depend largely on the waste＇s initial compositionand degree of degradation. MSWs in developing countries usually have a high kitchen waste content（called HKWC MSW）. After comparing and analyzing the laboratory and field test results of physicalcomposition, hydraulic properties, gas generation and gas permeability, and mechanical properties forHKWC MSW and low kitchen waste content MSW （called LKWC MSW）, the following findings wereobtained： （1） HKWC MSW has a higher initial water content （IWC） than LKWC MSW, but the field capacitiesof decomposed HKWC and LKWC MSWs are similar; （2） the hydraulic conductivity and gaspermeability for HKWC MSW are both an order of magnitude smaller than those for LKWC MSW; （3）compared with LKWC MSW, HKWC MSW has a higher landfill gas （LFG） generation rate but a shorterduration and a lower potential capacity; （4） the primary compression feature for decomposed HKWCMSW is similar to that of decomposed LKWC MSW, but the compression induced by degradation ofHKWC MSW is greater than that of LKWC MSW; and （5） the shear strength of HKWC MSW changessignificantly with time and strain. Based on the differences of engineering properties between these twokinds of MSWs, the geo-environmental issues in HKWC MSW landfills were analyzed, including highleachate production, high leachate mounds, low LFG collection efficiency, large settlement and slopestability problem, and corresponding advice for the management and design of HKWC MSW landfills wasrecommended.

Piezopotential augmented photo-and photoelectro-catalysis with a built-in electric field

Rapid technological development and population growth are responsible for a series of imminent environmental problems and an ineluctable energy crisis.The application of semiconductor nanomaterials in photocatalysis or photoelectrocatalysis(PEC)for either the degradation of contaminants in the environment or the generation of hydrogen as clean fuel is an effective approach to alleviate these problems.However,the efficiency of such processes remains suboptimal for real applications.Reasonable construction of a built-in electric field is considered to efficiently enhance carrier separation and reduce carrier recombination to improve catalytic performance.In the past decade,as a new method to enhance the built-in electric field,the piezoelectric effect from piezoelectric materials has been extensively studied.In this review,we provide an overview of the properties of piezoelectric materials and the mechanisms of piezoelectricity and ferroelectricity for a built-in electric field.Then,piezoelectric and ferroelectric polarization regulated built-in electric fields that mediate catalysis are discussed.Furthermore,the applications of piezoelectric semiconductor materials are also highlighted,including degradation of pollutants,bacteria disinfection,water splitting for H2 generation,and organic synthesis.We conclude by discussing the challenges in the field and the exciting opportunities to further improve piezo-catalytic efficiency.

Significant Enhancement in Built-in Potential and Charge Carrier Collection of Organic Solar Cells using 4-（5-hexylthiophene-2-yl）-2,6-bis（5- trifluoromethyl）thiophen-2-yl）pyridine as a Cathode Buffer Layer

An electron transporting material of TFTTP （4-（5-hexylthiophene-2-yl）-2,6-bis（5-trifluoromethyl）thiophen-2-yl）pyridine） was investigated as a cathode buffer layer to enhance the power efficiency of organic solar cells （OSCs） based on subphthalocyanine and C60. The overall power conversion efficiency was increased by a factor of 1.31 by inserting the TFTTP interfacial layer between the active layer and metallic cathode. The inner mechanism responsible for the performance enhancement of OSCs was systematically studied with the simulation of dark diode behavior and optical field distribution inside the devices as well as the characterization of device photocurrent. The results showed that the TFTTP layer could significantly increase the built-in potential in the devices, leading to the enhanced dissociation of charge transfer excitons. In addition, by using TFTTP as the buffer layer, a better Ohmic contact at C60/metal interface was formed, facilitating more efficient free charge carrier collection.

Oil accumulation related to migration of source kitchens in the Lukeqin structural belt, Turpan-Hami Basin, China

The Lukeqin structural belt is the main heavy oil accumulation zone in the Turpan-Hami Basin. The recent discovery of light oil in the Triassic indicates that there may be multiple source kitchens contributing to the oil accumulation. According to oil geochemical analysis and oil-source correlation, the oil in deep and shallow reservoirs of the Lukeqin Oilfield presents different physical and saturated hydrocarbon mass spectrum characteristics. The Triassic heavy oil is from the northern Upper Permian lacustrine source rocks, and the light oil represented by the Yudong-9 Well is from the northwestern Lower Jurassic coal-measure source rocks. The timing of oil charging was determined by K/Ar isotope dating, reservoir fluid inclusion analysis and the evolution history of different source rocks. In summary, the accumulation process consists of two stages. From the end of Triassic to early Jurassic, the northern Permian source kitchen generated a considerable amount of oil, which was finally degraded to heavy oil, migrated to the south and then accumulated. The northwestern Jurassic coal-measure source kitchen began to generate oil at the end of Cretaceous, while the northern source kitchen could only generate a little hydrocarbon. The heavy oil and the light oil have different source rock locations, migration directions and accumulation times. The migration of hydrocarbon source kitchens affects the distribution of heavy oil and light oil reservoirs at the present time.

Combination and superimposition of source kitchens and their effects on hydrocarbon accumulation in the hinterland of the Junggar Basin,west China

In the hinterland of the Junggar Basin, there are multiple depressions with multiple sets of source rocks. Therefore, the conditions of hydrocarbon sources are complex, and the geochemical characteristics and sources of hydrocarbon vary in different structural belts. The evolution of the Che- Mo palaeohigh affected the formation of hydrocarbon source kitchens and hydrocarbon migration. We studied the combination and superimposition of hydrocarbon source kitchens, using as an example the hinterland of the Junggar Basin （including the Yongjin, Zhengshacun, Moxizhuang and Luliang uplift areas）. The study was based on geochemical analyses of crude oil and fluid inclusions, and the histories of tectonic evolution and hydrocarbon generation. The results indicated that before the Paleogene there were two hydrocarbon-generating depressions： the Western Well Penl depression and the Changji depression on the south and north sides of the Che-Mo palaeohigh, respectively. The Permian source kitchen had been generating hydrocarbon continuously since Triassic and reached high maturity stage in the Cretaceous period. After Paleogene, the adjustment of the Che-Mo palaeohigh led to the subsidence of the Changji depression and the Jurassic source rocks reached mature stage and became the main source kitchens. However, the Jurassic source rocks in the Western Well Penl depression were still in a low maturity stage and did not generate oil because of the adjustment of tectonic movements. As a result, in the central and southern parts of the Junggar Basin, Jurassic source rocks generated oil, but in the Luliang uplift, the crude oil was from the Permian source rocks in the Western Well Penl depression and the Jurassic source rocks did not contribute. The crude oil in the central Zhengshacun-Moxizhuang belt was from the Permian source rocks in two depressions, and partially from the Jurassic source rocks. The crude oil in the Luliang uplift was from the source rocks of the lower Permian Fengcheng Formation and middle Permian Wuerhe Formation, which is characterized by superimposition of two sets of source kitchens and three accumulation stages. The crude oil in the Yongjin tectonic belt was from the lower Permian, middle Permian and Jurassic source rocks, which is characterized by superimposition of three sets of source kitchens and two accumulation stages. The crude oil in the Zhengshacun tectonic belt was from a combination of source kitchens of lower Permian and middle Permian in the Western Well Penl depression in the early stage and from the superimposition of Jurassic source rocks in the Changji depression in the late stage.

Anaerobic digestion of kitchen wastes in a single-phased anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO_2

The performance of the single-stage anaerobic digestion of kitchen wastes was investigated in an anaerobic sequencing batch reactor(ASBR) with gas-phased absorb of CO 2. The ASBR was operated at four chemical oxygen demand(COD) loading rates, 2.8, 5.1, 6.2 and 8.4 g/(L·d) respectively. The COD loading rate was increased with the TS concentration and HRT changing. At maximum COD loading rate of 8.4 g/(L·d), the COD, total solid(TS) removal rate and methane gas yield were 69%, 68% and 2.5 L/(L·d) respectively. The operation of the reactor with gas-phased absorb of CO 2 was stable in spite of the low pH(2.6—3.9) and high concentration of TS(142 g/L) of input mixture. The output volatile fatty acid(VFA) concentration was between 2.7—4.7 g/L and had no inhibition on the methanogenic microorganism. The reactor without gas-phased absorb of CO 2 became acidified when the total COD loading rate was increased to 5.1 g/(L·d). Stoichiometry of the methanogenesis for kitchen wastes showed a considerable amount of alkaline will be required to keep pH in the appropriate range for the methanogenic microorganism based on theoretical calculation. Gas-phased absorb of CO 2 effectively reduced the alkaline consumption, hence avoided excessive cation into the reactor.

Built-in electric field effect on cyclotron mass of magnetopolarons in a wurtzite In_xGa_(1-x)N/GaN quantum well

The cyclotron mass of magnetopolarons in wurtzite InxGa1-xN/GaN quantum well is studied in the presence of an external magnetic field by using the Larsen perturbation method. The effects of the built-in electric field and different phonon modes including interface, confined and half-space phonon modes are considered in our calculation. The results for a zinc-blende quantum well are also given for comparison. It is found that the main contribution to the transition energy comes from half-space and interface phonon modes when the well width is very small while the confined modes play a more important role in a wider well due to the location of the electron wave function. As the well width increases, the cyclotron mass of magnetopolarons first increases to a maximum and then decreases either with or without the built-in electric field in the wurtzite structure and the built-in electric field slightly reduces the cyclotron mass. The variation of cyclotron mass in a zinc-blende structure is similar to that in a wurtzite structure. With the increase of external magnetic field, the cyclotron mass of polarons almost linearly increases. The cyclotron frequency of magnetopolarons is also discussed.

A Review of Co-processing of Kitchen Waste and Municipal Residual Sludge

In this paper, the methods of kitchen waste disposal in recent years were summed up, and the advantages and disadvantages of the current treatment methods were analyzed. At the same time, it has been found that the co-processing of kitchen waste and residual sludge not only has dealt with both kitchen waste and residual sludge, but also the carbon and nitrogen ratio and moisture content of the mixture are balanced, and increases the processing efficiency significantly. It has a certain processing advantage. At present, most research is about the anaerobic digestion of kitchen waste and residual sludge, and the process is more mature, but the study of VFAs accumulation is still insufficient. Aerobic composting is still in the early stage of development, and there are few studies on it at home and abroad. Meanwhile, prospects for the kitchen waste recycling were made in this article.

Influence of temperature on production of lactic acid from kitchen garbage

The production of lactic acid from kitchen garbage, the precursor for production of biodegradable plastics is described in detail. The influence of temperature on the lactic acid concentration, sugar concentration, and decrement of garbage were evaluated through experiments. Fermentation were carried out in an incubator at 5, 25, 37 and 50 ℃. The latic acid produced was maximum at initial pH 6.0 and 37 ℃, i.e. 38 g/L with a yield of 0.23 g/gVS. It is concluded from the experimental results that temperature has quite a considerable effect on the production of lactic acid; lactic acid concentration increases with temperature until 37 ℃, and production rate of lactic acid drops at 50 ℃; the optimal fermentation is 37 ℃. This study shows that production of lactic acid from kitchen garbage is feasible and reduction of garbage can be realized.

Modeling and Simulation for Complex Repairable System with Built-in Test Equipment

In order to research the effects of built-in test(BIT) on the system and select BITand test strategy,the complex repairable systems with BITequipment are modeled and simulated by using Simulink.Based on the model,the influences of different built-in test equipments,maintenance time and error probabilities on the system usability are evaluated.The simulation results showthat they effect on the system differently.The simulation method of complex system based on Simulink provides a technique approach to research the effects of BITon the system and select BITand test strategy.

Interfacial engineering of transition-metal sulfides heterostructures with built-in electric-field effects for enhanced oxygen evolution reaction

Developing highly efficient,durable,and non-noble electrocatalysts for the sluggish anodic oxygen evolution reaction(OER)is the pivotal for meeting the practical demand in water splitting.However,the current transition-metal electrocatalysts still suffer from low activity and durability on account of poor interfacial reaction kinetics.In this work,a facile solid-state synthesis strategy is developed to construct transition-metal sulfides heterostructures(denoted as MS_(2)/NiS_(2),M=Mo or W)for boosting OER electrocatalysis.As a result,MoS2/NiS2 and WS2/NiS2 show lower overpotentials of 300 mV and 320 mV to achieve the current density of 10 mA·cm^(-2),and smaller Tafel slopes of 60 mV.dec^(-1) and 83 mV.dec^(-1)in 1 mol·L^(-1) KOH,respectively,in comparison with the single MoS2,WS2,NiS2,as well as even the benchmark RuO2.The experiments reveal that the designed heterostructures have strong electronic interactions and spontaneously develop a built-in electric field at the heterointerface with uneven charge distribution based on the difference of band structures,which promote interfacial charge transfer,improve absorptivity of OH-,and modulate the energy level more comparable to the OER.Thus,the designed transition-metal sulfides heterostructures exhibit a remarkably high electrocatalytic activity for OER.This study provides a simple strategy to manipulate the heterostructure interface via an energy level engineering method for OER and can be extended to fabricate other heterostructures for various energy-related applications.

An Adaptive Ramp Generator for ADC Built-in Self-Test

An adaptive ramp generator based on linear histogram was proposed for the built-in selftest (BIST) of analog to digital convertor (ADC) in CMOS image sensor. By comparing the generated ramp signal to a reference voltage and feeding back a calibration signal, the slope adjustment was implemented, and high linearity and precision of ramp slope were realized. By modulating the pulse width and reference voltage, sweep length varied from microsecond to second and signal swing could reach 3 V with 5.6 mW power consumption. The ramp was used as input to an ideal 10-bit single-slope ADC, and the corresponding DNL and INL were 0.032 LSB and 0.078 LSB, re-spectively.