A simulative analysis coupled with experiment on behaviors of a soil bed cut by a model bulldozer blade is carried out using the finite element/distinct element method(FE/DEM) facility built in the ELFEN package. Be...A simulative analysis coupled with experiment on behaviors of a soil bed cut by a model bulldozer blade is carried out using the finite element/distinct element method(FE/DEM) facility built in the ELFEN package. Before simulation, tensile/compression, triaxial compression and the soil specimens are examined through uniaxial direct shear tests to obtain model characteristics and relevant parameters, then soil cutting experiments are carried out via a mini-soil bin system with a soil bed of 60/120 mm in width and 10 mm in depth cut by a 1/9 scale model bulldozer blade moving with the velocity of 10 mm/s. The soil constitutive model includes the tensile elastic model for tensile breakage and the compressive elastoplastic relationship with Mohr-Coulomb criterion. The cutting length in simulation is set as 1/4 of that in the experiment divided into 1 869 triangular elements. The comparison between the simulated results and experimental ones shows that the used model is capable of analyzing soil dynamic behaviors qualitatively, and the predicted fracturing profiles in general conform to the experiment. Hence the feasibility for analyzing soil fracturing behaviors in tillage or other similar processes is validated.展开更多
The non-smooth surface morphology of dung beetle, Copris ochus, was analyzed. The bulldozing plates with bionic geometric non-smooth or the chemical uneven surface were designed for the soil sliding test based on the...The non-smooth surface morphology of dung beetle, Copris ochus, was analyzed. The bulldozing plates with bionic geometric non-smooth or the chemical uneven surface were designed for the soil sliding test based on the simulation of the bumpy surface of the dung beetle. Special black metals— with different contents of alloys of manganese, silicon, chromium, copper and rare earth— were developed for making geometric non-smooth and chemical uneven surfaces by means of surface welding at the surfaces of a middle carbon steel plate. Four metals, with different surface properties including hardness and water contact angle were used to make the bulldozing plates for measuring the soil sliding resistance. Test results of soil sliding resistance indicate that all the geometric non-smooth plates and the chemical uneven plates reducing soil friction. Considering the materials and surface morphology, the bionic plate can reduce the soil sliding resistance from 18.1 % up to 42.2%, compared to the traditional smooth bulldozing plate made from middle carbon steel. The test results also show that the smaller the normal load, the greater effect on resistance reduction by the bionic non-smooth surface plates.展开更多
Adhesive forces exist between soil and the surfaces of soil-engaging components; they increase working resistance and energy consumption. This paper tries to find an approach to reduce the adhesion and resistance of b...Adhesive forces exist between soil and the surfaces of soil-engaging components; they increase working resistance and energy consumption. This paper tries to find an approach to reduce the adhesion and resistance of bulldozing plate. A simplified mechanical model of adhesion and resistance between soil and a non-smooth bulldozing plate is proposed. The interaction force between moist soil and a non-smooth bulldozing plate is analyzed. The pressure and friction distribution on the bulldozing plate are computed, and the anti-adhesive effect of a corrugated bulldozing plate is simulated numerically. Numerical results show that the wavy bulldozing plate achieves an effective drag reduction in moist soil. The optimal wavy shape of the corrugated bulldozing plate with the minimal resistance is designed. The basic principle of reducing soil adhesion of the non-smooth surface is discovered.展开更多
Introduction:A fundamental challenge to the integrity of tropical dry forest ecosystems is the invasion of nonnative grass species.These grasses compete for resources and fuel anthropogenic wildfires.In 2012,a bulldo...Introduction:A fundamental challenge to the integrity of tropical dry forest ecosystems is the invasion of nonnative grass species.These grasses compete for resources and fuel anthropogenic wildfires.In 2012,a bulldozer from the Puerto Rico Electric Power Authority cleared a 570-m trail from a state road into a mature dry forest section of Guánica Forest to control a wildfire.We monitored colonization by a non-native invasive grass(Megathyrsus maximus),a highly invasive tree(Leucaena leucocephala),and a native grass(Uniola virgata),as well as natural regeneration,along the bulldozer trail.We determined whether bulldozing facilitated colonization by these species into the forest and the extent of spread.Results:Distance from propagule source and temporal variations strongly influenced colonization by our three focal species.Megathyrsus maximus invaded along the trail from source populations by the state road.The establishment of new colonies of M.maximus seedlings went as far as 570 m inside the forest(i.e.,at the end of the bulldozer trail),but we found most new colonies within 270 m of the road.Leucaena leucocephala exhibited a similar spreading pattern.Before disturbance,Uniola virgata was distributed widely across the forest,but the highest densities were found in areas near the latter portion(>401 m)of the bulldozer trail.Subsequently,the species formed new clumps along more than half of the trail(250 to 570 m),apparently colonizing from undisturbed patches nearby.Conclusions:Bulldozing facilitated the invasion of non-native vegetation.The projected community assemblage will be more fire-prone than before since M.maximus carries fire across the landscape better than U.virgata,emphasizing the capacity of invasive plant colonization to alter local ecological processes after only a single wildfire and bulldoze event.Our results provide a valuable baseline for short-term vegetation response to anthropogenic disturbances in tropical semi-deciduous dry forests.展开更多
基金This project is supported by National Natural Science Foundation of China (No. 10372113)Royal Society-NSFC China-UK Joint Project (No. 16468).
文摘A simulative analysis coupled with experiment on behaviors of a soil bed cut by a model bulldozer blade is carried out using the finite element/distinct element method(FE/DEM) facility built in the ELFEN package. Before simulation, tensile/compression, triaxial compression and the soil specimens are examined through uniaxial direct shear tests to obtain model characteristics and relevant parameters, then soil cutting experiments are carried out via a mini-soil bin system with a soil bed of 60/120 mm in width and 10 mm in depth cut by a 1/9 scale model bulldozer blade moving with the velocity of 10 mm/s. The soil constitutive model includes the tensile elastic model for tensile breakage and the compressive elastoplastic relationship with Mohr-Coulomb criterion. The cutting length in simulation is set as 1/4 of that in the experiment divided into 1 869 triangular elements. The comparison between the simulated results and experimental ones shows that the used model is capable of analyzing soil dynamic behaviors qualitatively, and the predicted fracturing profiles in general conform to the experiment. Hence the feasibility for analyzing soil fracturing behaviors in tillage or other similar processes is validated.
文摘The non-smooth surface morphology of dung beetle, Copris ochus, was analyzed. The bulldozing plates with bionic geometric non-smooth or the chemical uneven surface were designed for the soil sliding test based on the simulation of the bumpy surface of the dung beetle. Special black metals— with different contents of alloys of manganese, silicon, chromium, copper and rare earth— were developed for making geometric non-smooth and chemical uneven surfaces by means of surface welding at the surfaces of a middle carbon steel plate. Four metals, with different surface properties including hardness and water contact angle were used to make the bulldozing plates for measuring the soil sliding resistance. Test results of soil sliding resistance indicate that all the geometric non-smooth plates and the chemical uneven plates reducing soil friction. Considering the materials and surface morphology, the bionic plate can reduce the soil sliding resistance from 18.1 % up to 42.2%, compared to the traditional smooth bulldozing plate made from middle carbon steel. The test results also show that the smaller the normal load, the greater effect on resistance reduction by the bionic non-smooth surface plates.
文摘Adhesive forces exist between soil and the surfaces of soil-engaging components; they increase working resistance and energy consumption. This paper tries to find an approach to reduce the adhesion and resistance of bulldozing plate. A simplified mechanical model of adhesion and resistance between soil and a non-smooth bulldozing plate is proposed. The interaction force between moist soil and a non-smooth bulldozing plate is analyzed. The pressure and friction distribution on the bulldozing plate are computed, and the anti-adhesive effect of a corrugated bulldozing plate is simulated numerically. Numerical results show that the wavy bulldozing plate achieves an effective drag reduction in moist soil. The optimal wavy shape of the corrugated bulldozing plate with the minimal resistance is designed. The basic principle of reducing soil adhesion of the non-smooth surface is discovered.
文摘Introduction:A fundamental challenge to the integrity of tropical dry forest ecosystems is the invasion of nonnative grass species.These grasses compete for resources and fuel anthropogenic wildfires.In 2012,a bulldozer from the Puerto Rico Electric Power Authority cleared a 570-m trail from a state road into a mature dry forest section of Guánica Forest to control a wildfire.We monitored colonization by a non-native invasive grass(Megathyrsus maximus),a highly invasive tree(Leucaena leucocephala),and a native grass(Uniola virgata),as well as natural regeneration,along the bulldozer trail.We determined whether bulldozing facilitated colonization by these species into the forest and the extent of spread.Results:Distance from propagule source and temporal variations strongly influenced colonization by our three focal species.Megathyrsus maximus invaded along the trail from source populations by the state road.The establishment of new colonies of M.maximus seedlings went as far as 570 m inside the forest(i.e.,at the end of the bulldozer trail),but we found most new colonies within 270 m of the road.Leucaena leucocephala exhibited a similar spreading pattern.Before disturbance,Uniola virgata was distributed widely across the forest,but the highest densities were found in areas near the latter portion(>401 m)of the bulldozer trail.Subsequently,the species formed new clumps along more than half of the trail(250 to 570 m),apparently colonizing from undisturbed patches nearby.Conclusions:Bulldozing facilitated the invasion of non-native vegetation.The projected community assemblage will be more fire-prone than before since M.maximus carries fire across the landscape better than U.virgata,emphasizing the capacity of invasive plant colonization to alter local ecological processes after only a single wildfire and bulldoze event.Our results provide a valuable baseline for short-term vegetation response to anthropogenic disturbances in tropical semi-deciduous dry forests.